scholarly journals Analyses of Dynamic Behavior of Vertical Axis Wind Turbine in Transient Regime

2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Bacem Zghal ◽  
Imen Bel Mabrouk ◽  
Lassâad Walha ◽  
Kamel Abboudi ◽  
Mohamed Haddar
Keyword(s):  
Wind Turbine ◽  
Dynamic Behavior ◽  
Degrees Of Freedom ◽  
Vertical Axis ◽  
Transient Regime ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Gear Mesh ◽  
Internal Sources ◽  
Aerodynamic Torque

In this paper, the dynamic behavior of a one-stage bevel gear used in vertical axis wind turbine in transient regime is investigated. Linear dynamic model is simulated by fourteen degrees of freedom. Gear excitation is induced by external and internal sources which are, respectively, the aerodynamic torque caused by the fluctuation of input wind speed in transient regime and the variation of gear mesh stiffness. In this study, the differential equations governing the system motion are solved using an implicit Newmark algorithm. In fact, there are some design parameters, which influence the performance of vertical axis wind turbine. In order to get the appropriate aerodynamic torque, the effect of each parameter is studied in this work. It was found that the rotational speed of the rotor shaft has a significant effect on the aerodynamic torque performance.

Aerodynamic and aeroacoustic performance investigations on modified H-rotor Darrieus wind turbine

2021 ◽  
pp. 0309524X2110039
Author(s):  
Amgad Dessoky ◽  
Thorsten Lutz ◽  
Ewald Krämer
Keyword(s):  
Wind Turbine ◽  
High Speed ◽  
Cfd Simulation ◽  
Vertical Axis ◽  
3D Models ◽  
Power Coefficient ◽  
Design Parameters ◽  
Second Phase ◽  
Vertical Axis Wind Turbine ◽  
Guide Vanes

The present paper investigates the aerodynamic and aeroacoustic characteristics of the H-rotor Darrieus vertical axis wind turbine (VAWT) combined with very promising energy conversion and steering technology; a fixed guide-vanes. The main scope of the current work is to enhance the aerodynamic performance and assess the noise production accomplished with such enhancement. The studies are carried out in two phases; the first phase is a parametric 2D CFD simulation employing the unsteady Reynolds-averaged Navier-Stokes (URANS) approach to optimize the design parameters of the guide-vanes. The second phase is a 3D CFD simulation of the full turbine using a higher-order numerical scheme and a hybrid RANS/LES (DDES) method. The guide-vanes show a superior power augmentation, about 42% increase in the power coefficient at λ = 2.75, with a slightly noisy operation and completely change the signal directivity. A remarkable difference in power coefficient is observed between 2D and 3D models at the high-speed ratios stems from the 3D effect. As a result, a 3D simulation of the capped Darrieus turbine is carried out, and then a noise assessment of such configuration is assessed. The results show a 20% increase in power coefficient by using the cap, without significant change in the noise signal.

scholarly journals An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines

2018 ◽  
Vol 10 (9) ◽  
pp. 168781401879954
Author(s):  
Soo-Yong Cho ◽  
Sang-Kyu Choi ◽  
Jin-Gyun Kim ◽  
Chong-Hyun Cho
Keyword(s):  
Experimental Study ◽  
Optimal Design ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines

In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.

scholarly journals Numerical Analysis of Design Parameters With Strong Influence on the Aerodynamic Efficiency of a Small-Scale Self-Pitch VAWT

2015 ◽  
Author(s):  
Carlos Xisto ◽  
José Páscoa ◽  
Michele Trancossi
Keyword(s):  
Wind Turbine ◽  
Strong Influence ◽  
Vertical Axis ◽  
Periodic Variation ◽  
Numerical Approach ◽  
Design Parameters ◽  
Speed Ratio ◽  
Small Scale ◽  
Vertical Axis Wind Turbine ◽  
Four Bar Linkage

In the paper, four key design parameters with a strong influence on the performance of a small-scale high solidity variable pitch VAWT (Vertical Axis Wind Turbine), operating at low tip-speed-ratio (TSR) are addressed. To this aim a numerical approach, based on a finite-volume discretization of two-dimensional Unsteady RANS equations on a multiple sliding mesh, is proposed and validated against experimental data. The self-pitch VAWT design is based on a straight blade Darrieus wind turbine with blades that are allowed to pitch around a feathering axis, which is also parallel to the axis of rotation. The pitch angle amplitude and periodic variation are dynamically controlled by a four-bar-linkage system. We only consider the efficiency at low and intermediate TSR, therefore the pitch amplitude is chosen to be a sinusoidal function with a considerable amplitude. The results of this parametric analysis will contribute to define the guidelines for building a full size prototype of a small scale turbine of increased efficiency.

10 kw Vertical Axis Wind Turbine Spindle Design and Optimization

2014 ◽  
Vol 487 ◽  
pp. 429-434 ◽  
Author(s):  
Qiao Mei Li ◽  
Yang Cao ◽  
Guo Qing Wu ◽  
Xing Hua Chen ◽  
Yan Hua Cao
Keyword(s):  
Wind Turbine ◽  
Vibration Mode ◽  
Vertical Axis ◽  
Element Model ◽  
High Load ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Dead Weight ◽  
Design And Optimization ◽  
The Finite Element Model

The spindle of a 10 kw vertical axis wind turbine is designed in this paper, and the relevant geometric parameters is given, and build the geometry of the finite element model. Calculation of the spindle under wind load and dead weight , and analyse the spindle Von Mess stress, deformation nephogram, and give the former six order vibration mode of the spindle. Through the analysis, Then the design parameters of the spindle are optimized. and the optimized structure of spindle has been got. optimized spindle is in lower quality, more satisfy the requirement of wind turbine running under high load at the same time .

Case Study: Dynamic Analysis of a Novel Vertical Axis Wind Turbine

2015 ◽  
Author(s):  
Jeffrey A. Bennett ◽  
Shane Coogan ◽  
Kenneth B. Lane
Keyword(s):  
Wind Turbine ◽  
Analytical Model ◽  
Degrees Of Freedom ◽  
Vertical Axis ◽  
Energy System ◽  
Vertical Axis Wind Turbine ◽  
Low Level ◽  
Unique System ◽  
Novel Concept

An analytical model was developed for the dynamic evaluation of a novel vertical axis wind energy system. This study was conducted early on in the design process, so the goal was to create a low level tool to determine if the concept was feasible, to perform initial sizing of the turbine, to better understand the behavior of the unique furling mechanisms, and to predict the performance. In order to prevent damage at high rotational speeds, the novel concept integrates passive mechanisms into a drag driven vertical axis wind turbine with the intention that blades furl out of the wind once a critical wind speed is reached, and passively reopen. Established wind turbine aeroelastic codes were unable to represent this unique system, therefore, a standalone analytical model was developed in Python. A Lagrangian approach was taken to represent the interactions of the system’s degrees of freedom. To complete the model, mathematical representations of the furling mechanisms and interaction of the wind on the blades was developed. Basic structural calculations were also included to determine the initial size of the primary mechanical components. This case study focuses on the development of the low-level dynamic model and shares several results of the expected behavior.

scholarly journals Fabrication and Performance Evaluation of Savonious Vertical Axis Wind Turbine for Uncertain Speed Regions

2017 ◽  
Vol 13 (2) ◽  
Keyword(s):  
Performance Evaluation ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Vertical Axis ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Vertical Axis Wind Turbines ◽  
And Performance

The consumption of electricity in urban as well as rural is increasing every day and became an essential commodity for household and industrial purposes. Unfortunately the availability of electrical energy in India is not sufficient to the required demand and it is essential to discover and generate energy from non-conventional sources with cheap cost. On the same time it is necessary to reduce the consumption of conventional sources and to save fuel. Among all the renewable resources, wind is one of the best resources available all the time at free of cost. Especially vertical axis wind turbines (VAWT) are self-starting, omni directional. They require no yaw mechanism to continuously orient towards the wind direction and provide a more reliable energy conversion technology, as compared to horizontal axis wind turbine. Particularly savonius vertical axis wind turbines (SVAWT) are suitable and practically possible at low or uncertain wind speed regimes. They can be fitted on rooftops and also suitable for the urban areas where electricity is not available properly. This project deals with the fabrication and performance evaluation of savonius vertical axis wind turbine using two blade rotor. The amount of power developed by the wind turbine is calculated under theoretical and practical conditions and aerodynamics coefficients are also estimated. And various design parameters of savonious rotor are identified and determined.

Effect of Some Design Parameters on Performance of a Shutter Type Vertical Axis Wind Turbine

2012 ◽  
Author(s):  
Sandeep S. Wangikar ◽  
Nitin D. Misal
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Design Parameters ◽  
Rural Environment ◽  
Opening Angle ◽  
Vertical Axis Wind Turbine ◽  
Wind Speeds ◽  
Turbine Performance ◽  
Point Of Use ◽  
Renewable Energy Generation

Renewable energy generation in the rural environment has been receiving an increased attention over the recent years due to the proximity with the point of use. This paper presents the effect of design parameters on the performance of a Shutter Type Vertical Axis Wind Turbine (STVAWT). A STVAWT has been designed, manufactured and tested. The turbine performance has been investigated by varying the design parameters such as shutter angle and form of the shutter. The results were used for the comparison between the performance achieved while changing the design parameters. Significant numbers of experiments have been performed by changing the above mentioned parameters for different wind speeds. The effect of each parameter on the torque and power has been analyzed. It has been found that the shutter angle has a significant effect on the power of the turbine. The maximum power obtained in this investigation was 103 watts using a turbine with radius 150 cm, height 45 cm, shutter angle 30 degree and curved shutter form. The torque and power increases with increase in shutter angle up to 30 degree starting from 12 degree and then decreases with increase in shutter opening angle up to 48 degree. From this investigation, it is clear that the newly developed STVAWT is working efficiently at 30 degree shutter opening angle and the curved shutter form is found to be more efficient as compared to the straight shutter form.

Sign in / Sign up

Export Citation Format

Share Document