scholarly journals Improving Functional Properties of Cassava Starch-Based Films by Incorporating Xanthan, Gellan, or Pullulan Gums

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Mayra Sapper ◽  
Pau Talens ◽  
Amparo Chiralt
Keyword(s):  
Water Vapour ◽  
Sorption Capacity ◽  
Functional Properties ◽  
Water Sorption ◽  
Cassava Starch ◽  
Water Vapour Permeability ◽  
Gellan Gum ◽  
Partial Substitution ◽  
Vapour Permeability ◽  
Starch Films

The effect of the partial substitution of cassava starch in edible films for 10 and 20 wt% of gellan, xanthan, or pullulan gums was analysed in films obtained by casting. The tensile properties, barrier capacity to water vapour, and oxygen and water sorption isotherms of the samples were analysed. The blend of starch with gellan gum was effective to reduce the moisture sorption capacity of starch films while reducing water vapour permeability, enhancing the film strength and resistance to break and preserving films against starch retrogradation throughout the storage time. Xanthan gum improved the tensile behaviour of the starch films, but did not reduce their water sorption capacity and water vapour permeability. Pullulan did not notably improve the functional properties of the starch films. Gellan gum at 10 and 20 wt% in the blend could be used to obtain starch films with more adequate properties for food packaging purposes.

Effect of environmentally friendly plasma treatment on microfibre fabrics to improve some comfort properties

2018 ◽  
Vol 30 (1) ◽  
pp. 29-37
Author(s):  
Ramakrishnan G. ◽  
Prakash C. ◽  
Janani G.
Keyword(s):  
Plasma Treatment ◽  
Water Vapour ◽  
Functional Properties ◽  
Design Methodology ◽  
Air Permeability ◽  
Water Vapour Permeability ◽  
Test Results ◽  
Vapour Permeability ◽  
Content Type ◽  
Significant Difference

Purpose The purpose of this paper is to investigate plasma treatment for Tencel microfibre fabrics for possible improvement in various functional properties. Design/methodology/approach The plasma treated and untreated fabrics were dyed using reactive dyes and evaluated for comfort properties such as wicking, water vapour permeability and air permeability. Findings The various comfort properties of plasma treated and an untreated Tencel microfibre fabric have been studied. The wicking results showed a significant reduction in wicking time for plasma treated fabrics compared to untreated fabrics. The test results for water vapour permeability show no significant difference between plasma treated and untreated fabrics. The plasma treated samples show higher air permeability than untreated samples. In the wetting test, it is clearly seen that the plasma treated samples absorbed the water at a faster rate. Originality/value This research investigates plasma treatment for Tencel microfibre fabrics for possible improvement in various functional properties.

Using Control Chart to Detect Abnormal Changes in the Permeability

2013 ◽  
Vol 779-780 ◽  
pp. 319-322
Author(s):  
Ming Hung Shu ◽  
Jui Chan Huang ◽  
Thanh Lam Nguyen ◽  
Bi Min Hsu
Keyword(s):  
Water Vapour ◽  
Average Run Length ◽  
Stable Process ◽  
Critical Factor ◽  
Water Vapour Permeability ◽  
Control Signal ◽  
Process Mean ◽  
Vapour Permeability ◽  
Practical Applications ◽  
Printing Papers

Water-vapour permeability is a critical factor of writing/ printing papers in most of practical applications; but how to monitor the manufacturing process to keep the key characteristic of the paper in control is still understudied. Therefore, in this paper, in order to monitor the water-vapour permeability of writing/ printing papers, MaxGWMA chart is first suggested due to its best effectiveness in terms of average run length performance and its high capability of detecting small shifts in the process mean and variability as well as identifying the source and the direction of an out-of-control signal. By using MaxGWMA chart, assignable causes of any out-of-control signal should be deeply examined so as to have proper corrective actions undertaken to either eliminate them from the process or reduce the variability induced by them to make the papers consistently manufactured under a stable process.

Water sorption and mechanical properties of cassava starch films and their relation to plasticizing effect

2005 ◽  
Vol 60 (3) ◽  
pp. 283-289 ◽  
Author(s):  
S. Mali ◽  
L.S. Sakanaka ◽  
F. Yamashita ◽  
M.V.E. Grossmann
Keyword(s):  
Mechanical Properties ◽  
Water Sorption ◽  
Cassava Starch ◽  
Starch Films
Sign in / Sign up

Export Citation Format

Share Document