scholarly journals Multidisciplinary Approach Applied to the Diagnosis of the Facade of the Arciprestal Church of Santa María de Morella (Castellón, Spain)

Scanning ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Livio Ferrazza ◽  
María T. Pastor Valls ◽  
Gemma M. Contreras Zamorano ◽  
David Juanes Barber ◽  
Roxana Radvan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Multidisciplinary Approach ◽  
Polarized Light ◽  
Second Phase ◽  
Wall Paintings ◽  
Preventive Conservation ◽  
X Ray ◽  
Santa Maria ◽  
Scanning Electron

This paper deals with the development of a multidisciplinary study on the current state of conservation of the facade of the Arciprestal Church of Santa María de Morella (Castellón, Spain), a work of the Gothic period of great historical and artistic value. The aim of this diagnosis was to undertake the preventive conservation actions required and increase the knowledge about the conservation of paintings on stones. During the diagnosis scanning, electron microscopy was demonstrated to be a valuable analytical method for wall paintings on stone. The facade, which since its construction has not undergone major architectural changes, has reached our days as it was configured in its creation, adding the traces of the passage of time and interventions that have suffered polychromies. Because of the conservation situation, it was decided to have an interdisciplinary project for the structural study of the work, an exhaustive study of the materials and their state of conservation. The study of the materials includes the identification of stone supports, mortars, the pictorial technique of the original and added polychromies, and the superficial patinas. On-site studies were carried out by ground penetration radar (GPR) and X-ray fluorescence (XRF). Among the techniques used in laboratory were optical polarized light microscopy (MO-LP), X-ray diffraction (XRD), scanning electron microscopy with microanalysis (SEM-EDX) and Fourier-transform infrared spectroscopy (FTIR). The study allowed to determine the different pathologies of alteration and degradation of stone substrate and polychromies, chromatic alterations, biological patinas, etc. During this study, it was demonstrated that the diagnosis of wall paintings is a complex issue that needs to be addressed in a multidisciplinary approach, where scanning electron microscopy with microanalysis is the key methodology to get a deeper understanding of subsurface characterization of wall paintings and highlight the weathering processes. In a second phase of previous studies, this technique (SEM) has been used in assessing the viability of consolidation systems and cleaning both the stone and the polychrome.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Identification of Nd163 phase in melt-textured NdBa2Cu3O7−δ bulk samples

2003 ◽  
Vol 18 (9) ◽  
pp. 2050-2054 ◽  
Author(s):  
Marcello Gombos ◽  
Vicente Gomis ◽  
Anna Esther Carrillo ◽  
Antonio Vecchione ◽  
Sandro Pace ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Microscopy ◽  
Room Temperature ◽  
Polarized Light ◽  
Energy Dispersive ◽  
X Ray ◽  
Spontaneous Formation ◽  
The Stability ◽  
Scanning Electron

In this work, we report on the observation of Nd1Ba6Cu3O10,5 (Nd163) phase of the NdBaCuO system in melt-textured Nd123 bulk samples grown from a mixture of Nd123 and Nd210 phase powders. The observation was performed with polarized light optical microscopy and scanning electron microscopy–energy dispersive x-ray analyses. Images of the identified phase crystals show an aspect quite different from Nd422 crystals. Unexpectedly, Nd163 was individuated, even in “pure” Nd123 samples. Moreover, after long exposure to air, Nd163 disappeared completely in samples synthesized from powders containing Nd210. Thermogravimetry analyses of powders show that the stability of this phase in air is limited to temperatures higher than 900 °C, so Nd163 is unstable and highly reactive at room temperature. Moreover, an explanation of the observation of Nd163 in Nd210 free samples, based on the spontaneous formation of Nd163 phase in a Nd123 melt, is proposed.

MICROSTRUCTURAL STUDIES OF SUPERCONDUCTING 3EuBa2Cu3Oy:AgO AND 3GdBa2Cu3Oy:AgO COMPOSITES

1989 ◽  
Vol 03 (11) ◽  
pp. 877-885
Author(s):  
C.Y. HUANG ◽  
H.H. TAI ◽  
M.K. WU
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Silver Particle ◽  
Polarized Light ◽  
Energy Dispersive ◽  
X Ray ◽  
Grain Formation ◽  
Microstructural Studies ◽  
Scanning Electron

Scanning electron microscopy, energy dispersive X-ray spectroscopy, and polarized light microscopy have shown that the addition of AgO to the E uBa 2 Cu 3 O y and GdBa 2 Cu 3 O y systems results in the growth of very large grains. Distribution of silver particle appears to influence the grain formation and growth in the superconducting composites.

Effects of Rare Earth on Microstructure and Mechanical Properties of Al-3.2Mg Alloy

2015 ◽  
Vol 817 ◽  
pp. 192-197
Author(s):  
Xin Zhang ◽  
Ze Hua Wang ◽  
Ze Hua Zhou ◽  
Jian Ming Xu ◽  
Zhao Jun Zhong ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Grain Size ◽  
Tensile Strength ◽  
Rare Earth ◽  
Second Phase ◽  
Phase Precipitation ◽  
X Ray ◽  
Scanning Electron

A series of Al-3.2Mg alloys with addition of 0~1.6 wt.% rare earth (Ce and La) were prepared. The microstructure of as-cast Al-3.2Mg alloys was investigated by optical microscopy (OM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and the tensile strength was measured. The results indicated that the addition of rare earth elements refined grain size and secondary dendrite arm spacing (SDAS), and the tensile strength was affected by means of the second-phase precipitation and the grain boundary. Accordingly, the ductility of Al-3.2Mg alloys reduced with the increasing of RE addition due to the more second-phase formation.

The Xth Cent. Church in Drustar: Study of Wall Paintings by Spectroscopic Methods

2002 ◽  
Vol 712 ◽  
Author(s):  
T. Zorba ◽  
K.M. Paraskevopoulos ◽  
D.I. Siapkas ◽  
E. Pavlidou ◽  
S. Angelova ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
Spectroscopic Methods ◽  
Wall Paintings ◽  
Christian Church ◽  
X Ray ◽  
River Danube ◽  
Byzantine Era ◽  
Scanning Electron

ABSTRACTThe technique and painting used in the earlier wall paintings from the characteristic Christian church in Drustar - close to the river Danube - in Bulgaria, are studied. The fragments of wall paintings used in this study are examined mainly by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Analysis (EDS). It is concluded that the technique used was fresco and that the pigments used are common to those used in the Byzantine era.

Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry (SEM/EDS): The Last Step in the Microanalysis of Particulate Matter Isolates

1998 ◽  
Vol 4 (S2) ◽  
pp. 520-521
Author(s):  
R.J. Maxwell ◽  
M.A. Smith ◽  
D.S. Aldrich
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Systematic Approach ◽  
Drug Product ◽  
Polarized Light ◽  
Pharmaceutical Product ◽  
High Magnification ◽  
Steel Alloys ◽  
X Ray ◽  
Scanning Electron

The SEM/EDS is a valuable tool in the pharmaceutical industry for aiding in the identification of isolated particles. It is a part of our systematic approach which proceeds from lower magnification techniques, e.g., stereomicroscope, to higher magnification techniques, eg., polarized light microscopy, and finally to the high magnification of SEM/EDS. Particles associated with pharmaceutical product rejects are due to a variety of sources, often due to the ubiquitous use of some materials, e.g., stainless steel alloys, in the manufacturing arena. Our particles of interest range in size from submicron to ≥ 50 μm (visible with the unaided eye), appearing in numerous shapes and/or colors. Any particles contained in a drug product or associated with the package are objectionable. Detection during production operations and/or during the terminal 100% inspection prior to market release will cause product rejection. In any case, foreign particles are not tolerated. Their identification leads to their source and thus proper corrective action.

The Influence of Sintering Conditions on Microstructure of La-Ca-Sr-Mn-O Magnetocaloric Ceramics

2014 ◽  
Vol 782 ◽  
pp. 503-506 ◽  
Author(s):  
Katarina Zmorayova ◽  
Samuel Piovarči ◽  
Monika Radusovska ◽  
Vitaliy Antal ◽  
Viktor Kavečanský ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Grain Size ◽  
Thermal Analyses ◽  
Polarized Light ◽  
Secondary Phases ◽  
X Ray ◽  
Different Temperatures ◽  
Sintering Conditions ◽  
Scanning Electron

A La0.67Ca0.33-xSrxMnO3 (x=0.33; 0.03; 0) perovskite magnetocaloric powders were prepared by solid state synthesis in air. Phase transformations were characterized by thermal analyses and the phase composition was confirmed by X-ray powder diffraction. Pressed pellets were sintered at different temperatures. Microstructure analyses were done by polarized light microscopy and scanning electron microscopy. The influence of sintering conditions on porosity, grain size and content of secondary phases is shown.

Scanning Electron Microscopy and X-Ray Analyses of Dental Tissues from a Hibernator

1976 ◽  
Vol 34 ◽  
pp. 178-179
Author(s):  
M. L. Zimny ◽  
A. C. Haller
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Body Temperature ◽  
Ground Squirrel ◽  
Alveolar Bone ◽  
X Ray ◽  
Dental Tissues ◽  
Bone Minerals ◽  
Apical Tooth ◽  
Scanning Electron

During hibernation the ground squirrel is immobile, body temperature reduced and metabolism depressed. Hibernation has been shown to affect dental tissues varying degrees, although not much work has been done in this area. In limited studies, it has been shown that hibernation results in (1) mobilization of bone minerals; (2) deficient dentinogenesis and degeneration of alveolar bone; (3) presence of calculus and tears in the cementum; and (4) aggrevation of caries and pulpal and apical tooth abscesses. The purpose of this investigation was to study the effects of hibernation on dental tissues employing scanning electron microscopy (SEM) and related x-ray analyses.

Scanning Electron Microscopy and x-ray analysis of microparticles and early hydration effects

1995 ◽  
Vol 53 ◽  
pp. 692-693
Author(s):  
Yun Lu ◽  
David C. Joy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Morphological Development ◽  
Early Hydration ◽  
X Ray ◽  
Blended Cements ◽  
Powder Particles ◽  
Chemical Wastes ◽  
Scanning Electron

High resolution scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA) were performed to investigate microparticles in blended cements and their hydration products containing sodium-rich chemical wastes. The physical appearance of powder particles and the morphological development at different hydration stages were characterized by using high resolution SEM Hitachi S-900 and by SEM S-800 with a EDX spectrometer. Microparticles were dispersed on the sample holder and glued by 1% palomino solution. Hydrated bulk samples were dehydrated by acetone and mounted on the holder by silver paste. Both fracture surfaces and flat cutting sections of hydrating samples were prepared and examined. Some specimens were coated with an 3 nm thick Au-Pd or Cr layer to provide good conducting surfaces. For high resolution SEM S-900 observations the accelerating voltage of electrons was 1-2 KeV to protect the electron charging. Microchemical analyses were carried out by S800/EDS equipped with a LINK detector of take-off angle =40°.

Defects of Platelet Function Recognized by X-Ray Imaging and Scanning Electron Microscopy

1985 ◽  
Vol 43 ◽  
pp. 610-613
Author(s):  
M.G. Baldini ◽  
S. Morinaga ◽  
D. Minasian ◽  
R. Feder ◽  
D. Sayre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Cell Biology ◽  
Imaging Technique ◽  
Human Platelets ◽  
X Rays ◽  
X Ray ◽  
X Ray Imaging ◽  
Complex Phenomena ◽  
Scanning Electron

Contact X-ray imaging is presently developing as an important imaging technique in cell biology. Our recent studies on human platelets have demonstrated that the cytoskeleton of these cells contains photondense structures which can preferentially be imaged by soft X-ray imaging. Our present research has dealt with platelet activation, i.e., the complex phenomena which precede platelet appregation and are associated with profound changes in platelet cytoskeleton. Human platelets suspended in plasma were used. Whole cell mounts were fixed and dehydrated, then exposed to a stationary source of soft X-rays as previously described. Developed replicas and respective grids were studied by scanning electron microscopy (SEM).

Sign in / Sign up

Export Citation Format

Share Document