scholarly journals Low-Profile Flexible UHF RFID Tag Design for Wristbands Applications

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Guan-Long Huang ◽  
Chow-Yen-Desmond Sim ◽  
Shu-Yao Liang ◽  
Wei-Sheng Liao ◽  
Tao Yuan
Keyword(s):  
Radio Frequency Identification ◽  
Free Space ◽  
Complex Impedance ◽  
Uhf Rfid ◽  
Healthcare Applications ◽  
Space Condition ◽  
Rfid Tag ◽  
Low Profile ◽  
Frequency Identification ◽  
Slot Cavity

In this study, a low-profile ultrahigh frequency (UHF) radio-frequency identification (RFID) tag antenna designed for wristbands in healthcare applications is proposed. The radiator is based on the open-slot cavity technique that is composed of a slotted patch (double-T slots) loaded onto a flexible open cavity. The proposed slotted design can easily allow the tag’s input impedance to be tuned to the complex impedance of typical UHF RFID chips. The proposed tag antenna has a size of 86 mm × 25 mm × 1.6 mm (0.26λ0×0.07λ0×0.004λ0) at 915 MHz, and it can yield a maximum reading range of 8 m (stand alone in free-space condition), 6.6 m (when placed on the human wrist in free-space condition), and up to 3 m (when placed on the human wrist in a crowded condition).

A low-profile FSS-based high capacity chipless RFID tag for sensing and encoding applications

2021 ◽  
pp. 1-9
Author(s):  
Shahid Habib ◽  
Amjad Ali ◽  
Ghaffer Iqbal Kiani ◽  
Wagma Ayub ◽  
Syed Muzahir Abbas ◽  
...  
Keyword(s):  
Radio Frequency Identification ◽  
High Capacity ◽  
Frequency Selective Surface ◽  
Rfid Tag ◽  
Sensing Applications ◽  
Low Profile ◽  
Simple Geometry ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Good Agreement

Abstract This paper presents a polarization-independent 11-bit chipless RFID tag based on frequency-selective surface which has been designed for encoding and relative humidity (RH) sensing applications. The 10 exterior U-shaped resonators are used for item encoding whereas Kapton has been incorporated with the interior resonator for RH sensing. This radio-frequency identification (RFID) tag operates in S- and C-frequency bands. The proposed design offers enhanced fractional bandwidth up to 88% with the density of 4.46 bits/cm2. Both single- and dual-layer tags have been investigated. The simulated results are in good agreement with measured results and a comparison with existing literature is presented to show the performance. Simple geometry, high code density, large frequency signature bandwidth, high magnitude bit, high radar cross-section, and angular stability for more than 75° are the unique outcomes of the proposed design. In addition, RH sensing has been achieved by integrating the Kapton on the same RFID tag.

scholarly journals Longest-Range UHF RFID Sensor Tag Antenna for IoT Applied for Metal and Non-Metal Objects

Sensors ◽  
2019 ◽  
Vol 19 (24) ◽  
pp. 5460 ◽  
Author(s):  
Franck Kimetya Byondi ◽  
Youchung Chung
Keyword(s):  
Wireless Sensor Networks ◽  
Radio Frequency Identification ◽  
High Frequency ◽  
Wireless Sensor ◽  
The Internet ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Frequency Identification ◽  
The Internet Of Things ◽  
Read Range

This paper presents a passive cavity type Ultra High Frequency (UHF) Radio Frequency Identification (RFID) tag antenna having the longest read-range, and compares it with existing long-range UHF RFID tag antenna. The study also demonstrates mathematically and experimentally that our proposed longest-range UHF RFID cavity type tag antenna has a longer read-range than existing passive tag antennas. Our tag antenna was designed with 140 × 60 × 10 mm3 size, and reached 26 m measured read-range and 36.3 m mathematically calculated read-range. This UHF tag antenna can be applied to metal and non-metal objects. By adding a further sensing capability, it can have a great benefit for the Internet of Things (IoT) and wireless sensor networks (WSN).

Structure optimization of an ultrahigh frequency radio frequency identification tag thread based on the normal mode helix dipole antenna

2020 ◽  
pp. 004051752094890
Author(s):  
Yong Zhang ◽  
Jiyong Hu ◽  
Xiong Yan ◽  
Xudong Yang
Keyword(s):  
Resonant Frequency ◽  
Normal Mode ◽  
Radio Frequency Identification ◽  
Dipole Antenna ◽  
Uhf Rfid ◽  
Simulation Experiments ◽  
Rfid Tag ◽  
Helical Pitch ◽  
Frequency Identification ◽  
Linear Dipole

This paper describes the design of a novel ultrahigh frequency radio frequency identification (UHF RFID) tag thread that mainly consisted of the common yarn and the normal mode helix dipole antenna. The linear dipole antenna for the UHF RFID tag thread was too long to miniaturize the tag. In order to maximize the read performance and miniaturize the size of the tag, the basic antenna structure parameters, such as the helical pitch and single arm length, were optimized by analyzing the radiation parameter S11 of the normal mode helix dipole antenna based on simulation experiments. The simulation experiments started with optimizing the single arm length to obtain the minimum of the S11 parameter at resonant frequency, then the helical pitch was further optimized to limit the resonant frequency to the UHF range. The simulation results showed the resonant frequency rises with an increase of helical pitch and declines with an increase of single arm length. Furthermore, a series of UHF RFID tag threads with good performance from the simulation cases were prepared, and the performance of the optimized tag was validated. Generally, the UHF RFID tag thread with optimized helix dipole antenna could reduce the axial length of the tag by 57% and improve the reading range by 500%, and its performance was greatly superior to that of the UHF RFID tag thread with the classical linear dipole antenna.

A Novel Design of PIE Decoding with Multiple CRC Circuit for RFID Tag

2013 ◽  
Vol 816-817 ◽  
pp. 957-961
Author(s):  
Feng Ying Huang ◽  
Jun Wang ◽  
Yu Sen Xu ◽  
Ji Wei Huang
Keyword(s):  
Data Processing ◽  
Parallel Algorithm ◽  
Radio Frequency Identification ◽  
High Frequency ◽  
Pulse Interval ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Frequency Identification ◽  
Simulation Results ◽  
Novel Design

This paper proposes a new synchronized serial-parallel CRC(Cycle Redundancy Check) with PIE(Pulse Interval Encoding) decoding circuit for the UHF(Ultra-High Frequency) RFID(Radio Frequency Identification), which is based on the ISO/IEC 18000-6C standards protocol. The parallel algorithm of CRC circuit is derived, and the serial or parallel CRC circuit on RFID tag chip is evaluated in this paper. Finally, the designed circuit is simulated and analyzed on the FPGA platform. Simulation results show that the proposed circuit meets the communication requirement of the protocol and addresses the problem of low data processing rate of conventional serial CRC circuit, as well as implements 1 to 8 degree of parallelism of the parallel CRC circuit for UHF RFID.

scholarly journals Stretchable Textile Yarn Based on UHF RFID Helical Tag

Textiles ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 547-557
Author(s):  
Sofia Benouakta ◽  
Florin Doru Hutu ◽  
Yvan Duroc
Keyword(s):  
Radio Frequency Identification ◽  
Textile Yarn ◽  
Radiative Properties ◽  
Rfid Tags ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Half Wave ◽  
Present Solution ◽  
Frequency Identification ◽  
Helical Geometry

In the context of wearable technology, several techniques have been used for the fabrication of radio frequency identification (RFID) tags such as 3D printing, inkjet printing, and even embroidery. In contrast to these methods where the tag is attached to the object by using sewing or simple sticking, the E-Thread® technology is a novel assembling method allowing for the integration of the RFID tag into a textile yarn and thus makes it embeddable into the object at the fabrication stage. The current E-Thread® yarn uses a RFID tag in which the antenna is a straight half-wave dipole that makes the solution vulnerable to mechanical strains (i.e., elongation). In this paper, we propose an alternative to the current RFID yarn solution with the use of an antenna having a helical geometry that answers to the mechanical issues and keeps quite similar electrical and radiative properties with respect to the present solution. The RFID helical tag was designed and simulated taking into consideration the constraints of the manufacturing process. The helical RFID tag was then fabricated using the E-Thread® technology and experimental characterization showed that the obtained structure exhibited good performance with 10.6 m of read range in the ultra high frequency (UHF) RFID band and 10% of tolerance in terms of elongation.

scholarly journals Brush-Painting and Photonic Sintering of Copper Oxide and Silver Inks on Wood and Cardboard Substrates to Form Antennas for UHF RFID Tags

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Erja Sipilä ◽  
Johanna Virkki ◽  
Jianhua Wang ◽  
Lauri Sydänheimo ◽  
Leena Ukkonen
Keyword(s):  
Copper Oxide ◽  
Radio Frequency Identification ◽  
Rfid Tags ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Wireless Testing ◽  
Silver Ink ◽  
Frequency Identification ◽  
Remote Identification ◽  
Photonic Sintering

Additive deposition of inks with metallic inclusions provides compelling means to embed electronics into versatile structures. The need to integrate electronics into environmentally friendly components and structures increases dramatically together with the increasing popularity of the Internet of Things. We demonstrate a novel brush-painting method for depositing copper oxide and silver inks directly on wood and cardboard substrates and discuss the optimization of the photonic sintering process parameters for both materials. The optimized parameters were utilized to manufacture passive ultra high frequency (UHF) radio frequency identification (RFID) tag antennas. The results from wireless testing show that the RFID tags based on the copper oxide and silver ink antennas on wood substrate are readable from ranges of 8.5 and 11 meters, respectively, and on cardboard substrate from read ranges of 8.5 and 12 meters, respectively. These results are well sufficient for many future wireless applications requiring remote identification with RFID.

scholarly journals A Compact and Flexible UHF RFID Tag Antenna for Massive IoT Devices in 5G System

Sensors ◽  
2020 ◽  
Vol 20 (19) ◽  
pp. 5713
Author(s):  
Muhammad Hussain ◽  
Yasar Amin ◽  
Kyung-Geun Lee
Keyword(s):  
Radio Frequency Identification ◽  
Cost Effective ◽  
Future Internet ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Low Profile ◽  
5G Systems ◽  
Iot Devices ◽  
Passive Rfid ◽  
Read Range

Upcoming 5th-generation (5G) systems incorporate physical objects (referred to as things), which sense the presence of components such as gears, gadgets, and sensors. They may transmit many kinds of states in the smart city context, such as new deals at malls, safe distances on roads, patient heart rhythms (especially in hospitals), and logistic control at aerodromes and seaports around the world. These serve to form the so-called future internet of things (IoT). From this futuristic perspective, everything should have its own identity. In this context, radio frequency identification (RFID) plays a specific role, which provides wireless communications in a secure manner. Passive RFID tags carry out work using the energy harvested among massive systems. RFID has been habitually realized as a prerequisite for IoT, the combination of which is called IoT RFID (I-RFID). For the current scenario, such tags should be productive, low-profile, compact, easily mountable, and have eco-friendly features. The presently available tags are not cost-effective and have not been proven as green tags for environmentally friendly IoT in 5G systems nor are they suitable for long-range communications in 5G systems. The proposed I-RFID tag uses the meandering angle technique (MAT) to construct a design that satisfies the features of a lower-cost printed antenna over the worldwide UHF RFID band standard (860–960 MHz). In our research, tag MAT antennas are fabricated on paper-based Korsnäs by screen- and flexo-printing, which have lowest simulated effective outcomes with dielectric variation due to humidity and have a plausible read range (RR) for European (EU; 866–868 MHz) and North American (NA; 902–928 MHz) UHF band standards. The I-RFID tag size is reduced by 36% to 38% w.r.t. a previously published case, the tag gain has been improved by 23.6% to 33.12%, and its read range has been enhanced by 50.9% and 59.6% for EU and NA UHF bands, respectively. It provides impressive performance on some platforms (e.g., plastic, paper, and glass), thereby providing a new state-of-the-art I-RFID tag with better qualities in 5G systems.

scholarly journals 3D Printed Long-Range Cavity Structure UHF RFID Tag Antenna with Painting Conductive Ink on Convex Surface

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1408
Author(s):  
Franck Kimetya Byondi ◽  
Youchung Chung
Keyword(s):  
Long Range ◽  
Radio Frequency Identification ◽  
Convex Surface ◽  
Conductive Ink ◽  
Uhf Rfid ◽  
Rfid Tag ◽  
Cavity Structure ◽  
Frequency Identification ◽  
3D Printed ◽  
Side Walls

In this paper, we describe a long-range convex cavity-type passive ultra-high-frequency (UHF) radio frequency identification (RFID) tag to use on various metal and non-metal surfaces, for IoT sensor energy harvesting. The tag antenna is built on the 3D printed cavity structure with polylactic acid (PLA) plastic and painted with the conductive ink on the 1 mm protruding area (convex) of inner surface and the side-walls of the cavity structure to form a cavity structure. The tag is designed to operate in the UHF band (840–960 MHz). This long-range cavity tag antenna (CTA) works at both 920 MHz and 915 MHz UHF RFID frequencies. It provides a linear polarized (LP) frontal reading range of 35 m and side reading range above 15 m when mounted on either metal or non-metal objects. We describe the antenna characteristics, structure, modeling, simulation, and experimental results. A mathematical reading range also was calculated and compared with experimental data.

Low-Power Passive/Active UHF RFID Tag Transceiver with Frequency Locked On-chip Oscillator

2020 ◽  
Vol 29 (14) ◽  
pp. 2050234 ◽  
Author(s):  
Peiqing Han ◽  
Zhaofeng Zhang ◽  
Niansong Mei
Keyword(s):  
Radio Frequency Identification ◽  
Supply Voltage ◽  
Operating Mode ◽  
Cmos Process ◽  
Uhf Rfid ◽  
Passive Mode ◽  
Rfid Tag ◽  
Active Mode ◽  
Frequency Identification ◽  
On Chip

A reconfigurable architecture is presented to be compatible with conventional passive operating mode and active mode for ultrahigh frequency (UHF) and radio-frequency identification (RFID) tag. The transceiver with frequency locked on-chip oscillator is proposed to increase the read range of RFID system and the lifetime of tag. The transceiver is fabricated in 0.18[Formula: see text][Formula: see text]m standard CMOS process with the active area of 0.246[Formula: see text]mm2. For passive mode, the sensitivity of tag is [Formula: see text][Formula: see text]dBm. For the active mode, the sensitivity is [Formula: see text][Formula: see text]dBm only consuming 1.2[Formula: see text][Formula: see text]W under the supply voltage of 0.8[Formula: see text]V. The output power is [Formula: see text][Formula: see text]dBm for active transmitting mode and the power consumption is 450[Formula: see text][Formula: see text]W under the supply voltage of 1[Formula: see text]V.

Sign in / Sign up

Export Citation Format

Share Document