scholarly journals Geotechnical Properties of Wood Ash-Based Composite Fine-Grained Soil

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Bayshakhi Deb Nath ◽  
Grytan Sarkar ◽  
Sumi Siddiqua ◽  
Md. Rokunuzzaman ◽  
Md. Rafiqul Islam
Keyword(s):  
Soft Clay ◽  
Wood Ash ◽  
Engineering Properties ◽  
Electricity Production ◽  
Fine Grained ◽  
Pozzolanic Material ◽  
Fine Grained Soil ◽  
Solid Biomass ◽  
Test Result ◽  
Compressibility Characteristics

It is observed in Bangladesh that there is an extensive use of wood as a solid biomass for heat and electricity production, which led to increase in the amount of combustion residues known as ash. These ashes are discarded and dumped here and there, resulting in pollution of the environment. It could be managed by using wood ash as a stabilizer of soft clay. It is found that there is an enhancement of the engineering properties of existing soil in stabilized forms particularly unconfined compressive strength (UCS), shear strength parameters, workability, and compaction and compressibility characteristics. Therefore, laboratory tests associated with these properties were performed for some selected percentage of wood ash, for example, 0%, 5%, 7.5%, 10%, and 12.5%. Chemical investigation of wood ash depicts that it contains approximately 30% CaO, which directs it to behave like a pozzolanic material. Besides, the test result signifying that the soil could be made lighter with the increase of moisture content, strength, and reduction of compressibility due to the addition of ash content.

scholarly journals Remediation of Clayey Soil Using Silica Fume

2018 ◽  
Vol 162 ◽  
pp. 01017
Author(s):  
Kawther Al-Soudany
Keyword(s):  
Silica Fume ◽  
Clayey Soil ◽  
Liquid Limit ◽  
Engineering Properties ◽  
Unit Weight ◽  
Clay Material ◽  
Fine Grained ◽  
Pozzolanic Reactivity ◽  
Fine Grained Soil ◽  
Swell Pressure

This paper evaluates the use of silica fumes as modification of fine-grained soil in order to alter undesirable properties of the native soil and create new useful soils. Silica fume as well as clay material, are used in changing the engineering properties to be compatible and satisfying this is due to their pozzolanic reactivity. The study aims to investigate the uses of these materials in geotechnical engineering and to improve the properties of soils. Four percentages of silica fumes were used in the present study, which is 0, 3, 5 and 7%. Classification, specific gravity, compaction characteristics, swell and swell pressure, CBR and compressive strength tests had been conducted on the prepared and modified soils. Results clarified that the silica fume increasing leads to decrease the plasticity index and liquid limit. Increasing in silica fume causes an increasing in plastic limit and optimum water contents while the maximum dry unit weight values decrease. The compressive shear strength, California Bearing Ratio (CBR), swell and swell pressure is improved by using silica fume so that silica fume can be considered as a successful material in improving the soil properties.

Behaviour of compacted fine-grained soil in a brine environment

1984 ◽  
Vol 11 (2) ◽  
pp. 196-203 ◽  
Author(s):  
K. J. D. Ridley ◽  
J. K. Bewtra ◽  
J. A. McCorquodale
Keyword(s):  
Hydraulic Conductivity ◽  
Clay Mineral ◽  
Clay Content ◽  
Montmorillonite Clay ◽  
Engineering Properties ◽  
Solution Composition ◽  
Fine Grained ◽  
Fine Grained Soil ◽  
Brine Environment

The hydraulic conductivity and engineering properties of compacted fine-grained soils change with time when exposed to a 30% NaCl brine environment. The hydraulic conductivity of brine was found to be greater than that of water in soils where the dominant clay mineral was montmorillonite, whereas a soil rich in illite and kaolinite was virtually insensitive to variations in solution composition. Increases in brine hydraulic conductivities were most pronounced in soils high in montmorillonite where sodium was the dominant adsorbed ion. They demonstrated the most labile hydraulic conductivities. Fine-grained soils, high in montmorillonite clay content, were prone to alteration in engineering properties when soaked in a 30% NaCl brine. However, brine soaking had little effect on soils rich in illite–kaolinite.

scholarly journals Influence of Waste Toothbrush Fiber on Strength and Freezing–Thawing Behavior in High Plasticity Clay

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Fatih Isik ◽  
R. Kagan Akbulut ◽  
A. Sahin Zaimoglu
Keyword(s):  
Clayey Soil ◽  
Polypropylene Fiber ◽  
Engineering Properties ◽  
Waste Materials ◽  
High Plasticity ◽  
Fine Grained ◽  
Reinforcement Material ◽  
Fine Grained Soil ◽  
High Plasticity Clay ◽  
Waste Polypropylene

AbstractThe use of waste materials in civil engineering applications has gained importance nowadays. Consuming limited natural resources and increasing waste disposal costs have led researchers to evaluate waste materials for different geotechnical applications. In this respect, some waste materials are used as reinforcement in soils to improve their engineering properties. The main objective of this paper was to investigate the usability of waste polypropylene fiber as a reinforcement material in high plasticity fine-grained soils. For this purpose, waste toothbrush bristle (WTB) was used as a polypropylene fiber reinforcement material and added to fine-grained soil at ratios of 0.2%, 0.4%, 0.6% and 0.8% by dry total weight. The effect of WTB on freezing–thawing behavior and unconfined compression strength of unreinforced and reinforced clayey soil was evaluated. The results indicated that addition of WTB to high plasticity clay improved its behavior against freezing–thawing. Also, undrained shear strength increases with respect to increment in WTB ratio.

scholarly journals Experimental Study on Soil Stabilization Using Fibres

2021 ◽  
Keyword(s):  
Experimental Study ◽  
Bearing Capacity ◽  
Soil Stabilization ◽  
Soft Soil ◽  
Soil Samples ◽  
Engineering Properties ◽  
Soil Tests ◽  
Fine Grained ◽  
Fine Grained Soil ◽  
Materials Used

Abstract. For pavement constructions such as runway and highway construction, fine-grained soils are not suitable because of their undesirable properties such as grading of particle size, low bearing capacity, and more plasticity, and its ability to swell. To improve these soil properties various soil stabilization methods are needed. The stabilization is done by adding various stabilizing materials with the fine-grained soil. Fibres are one of the materials used in soil stabilization. This experimental study has been carried over to improve the bearing capacity of soft soil (from Sholinganallur, Chennai) by using Natural and Artificial fibres. During this study, the soil samples which has been stabilized with various fibres was prepared i.e., soil with Natural fibres (jute fibre) and soil with artificial fibres. In this experimental study, index properties and engineering properties of soft soil or unreinforced samples and stabilized soil samples with fibres are determined. Samples are subjected to various soil tests which have been used to determine the engineering properties of soil. The soil tests such as the standard proctor compaction test, unsoaked California Bearing Ratio (CBR) test, and Unconfined Compression (UCC) test had been done to determine the characteristics of the samples. To determine the properties of the reinforced materials, the fibres also have undergone various geosynthetic laboratory tests. The results of the study show that the bearing capacity of Shollinganallur fine-grained soil can be improved subsequently and water absorption by soil has been reduced significantly by using fibres.

scholarly journals Modeling the Compaction Characteristics of Fine-Grained Soils Blended with Tire-Derived Aggregates

2021 ◽  
Vol 13 (14) ◽  
pp. 7737
Author(s):  
Amin Soltani ◽  
Mahdieh Azimi ◽  
Brendan C. O’Kelly
Keyword(s):  
Energy Levels ◽  
Model Development ◽  
Dry Mass ◽  
Unit Weight ◽  
Power Functions ◽  
Compaction Characteristics ◽  
Practical Applications ◽  
Fine Grained ◽  
Practical Procedure ◽  
Fine Grained Soil

This study aims at modeling the compaction characteristics of fine-grained soils blended with sand-sized (0.075–4.75 mm) recycled tire-derived aggregates (TDAs). Model development and calibration were performed using a large and diverse database of 100 soil–TDA compaction tests (with the TDA-to-soil dry mass ratio ≤ 30%) assembled from the literature. Following a comprehensive statistical analysis, it is demonstrated that the optimum moisture content (OMC) and maximum dry unit weight (MDUW) for soil–TDA blends (across different soil types, TDA particle sizes and compaction energy levels) can be expressed as universal power functions of the OMC and MDUW of the unamended soil, along with the soil to soil–TDA specific gravity ratio. Employing the Bland–Altman analysis, the 95% upper and lower (water content) agreement limits between the predicted and measured OMC values were, respectively, obtained as +1.09% and −1.23%, both of which can be considered negligible for practical applications. For the MDUW predictions, these limits were calculated as +0.67 and −0.71 kN/m3, which (like the OMC) can be deemed acceptable for prediction purposes. Having established the OMC and MDUW of the unamended fine-grained soil, the empirical models proposed in this study offer a practical procedure towards predicting the compaction characteristics of the soil–TDA blends without the hurdles of performing separate laboratory compaction tests, and thus can be employed in practice for preliminary design assessments and/or soil–TDA optimization studies.

scholarly journals Assessment for Thermal Conductivity of Frozen Soil Based on Nonlinear Regression and Support Vector Regression Methods

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Fu-Qing Cui ◽  
Wei Zhang ◽  
Zhi-Yun Liu ◽  
Wei Wang ◽  
Jian-bing Chen ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Support Vector Regression ◽  
Nonlinear Regression ◽  
Prediction Accuracy ◽  
Prediction Models ◽  
Frozen Soil ◽  
Support Vector ◽  
Soil Thermal Conductivity ◽  
Fine Grained ◽  
Fine Grained Soil

The comprehensive understanding of the variation law of soil thermal conductivity is the prerequisite of design and construction of engineering applications in permafrost regions. Compared with the unfrozen soil, the specimen preparation and experimental procedures of frozen soil thermal conductivity testing are more complex and challengeable. In this work, considering for essentially multiphase and porous structural characteristic information reflection of unfrozen soil thermal conductivity, prediction models of frozen soil thermal conductivity using nonlinear regression and Support Vector Regression (SVR) methods have been developed. Thermal conductivity of multiple types of soil samples which are sampled from the Qinghai-Tibet Engineering Corridor (QTEC) are tested by the transient plane source (TPS) method. Correlations of thermal conductivity between unfrozen and frozen soil has been analyzed and recognized. Based on the measurement data of unfrozen soil thermal conductivity, the prediction models of frozen soil thermal conductivity for 7 typical soils in the QTEC are proposed. To further facilitate engineering applications, the prediction models of two soil categories (coarse and fine-grained soil) have also been proposed. The results demonstrate that, compared with nonideal prediction accuracy of using water content and dry density as the fitting parameter, the ternary fitting model has a higher thermal conductivity prediction accuracy for 7 types of frozen soils (more than 98% of the soil specimens’ relative error are within 20%). The SVR model can further improve the frozen soil thermal conductivity prediction accuracy and more than 98% of the soil specimens’ relative error are within 15%. For coarse and fine-grained soil categories, the above two models still have reliable prediction accuracy and determine coefficient (R2) ranges from 0.8 to 0.91, which validates the applicability for small sample soils. This study provides feasible prediction models for frozen soil thermal conductivity and guidelines of the thermal design and freeze-thaw damage prevention for engineering structures in cold regions.

Physical and Mechanical Properties of Fine-Grained Soil in the Zhejiang-Fujian Coastal Area, China

2011 ◽  
Vol 29 (4) ◽  
pp. 333-345 ◽  
Author(s):  
Yuan-Qin Xu ◽  
Pei-Ying Li ◽  
Ping Li ◽  
Le-Jun Liu ◽  
Cheng-Xiao Cao ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Coastal Area ◽  
Physical And Mechanical Properties ◽  
Fine Grained ◽  
Fine Grained Soil

scholarly journals Centrifuge testing of soil–structure interaction effects on cyclic failure potential of fine-grained soil

2021 ◽  
pp. 875529302098197
Author(s):  
Jason M Buenker ◽  
Scott J Brandenberg ◽  
Jonathan P Stewart
Keyword(s):  
Soil Structure ◽  
Interaction Effects ◽  
Soil Structure Interaction ◽  
Centrifuge Testing ◽  
Geotechnical Centrifuge ◽  
Structure Interaction ◽  
Fine Grained ◽  
Stiffness Properties ◽  
Fine Grained Soil ◽  
Strip Footings

We describe two experiments performed on a 9-m-radius geotechnical centrifuge to evaluate dynamic soil–structure interaction effects on the cyclic failure potential of fine-grained soil. Each experiment incorporated three different structures with a range of mass and stiffness properties. Structures were founded on strip footings embedded in a thin layer of sand overlying lightly overconsolidated low-plasticity fine-grained soil. Shaking was applied to the base of the model container, consisting of scaled versions of recorded earthquake ground motions, sweep motions, and step waves. Data recorded during testing were processed and published on the platform DesignSafe. We describe the model configuration, sensor information, shaking events, and data processing procedures and present selected processed data to illustrate key model responses and to provide a benchmark for data use.

Sign in / Sign up

Export Citation Format

Share Document