scholarly journals FEM Design of a Cutting-Edge Support System for Micro-GT

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Fabrizio Stefani ◽  
Ramon Francesconi ◽  
Andrea Perrone
Keyword(s):  
Support System ◽  
Gas Turbines ◽  
Load Transfer ◽  
Design Procedure ◽  
Helix Angle ◽  
Rigid Bodies ◽  
Design Parameters ◽  
Technical Solution ◽  
Mechanical Coupling ◽  
Spline Coupling

The design of the support system (shaft, bearings, and mechanical coupling devices) of the rotor plays a key role in the development of efficient micro-gas turbines (micro-GTs) for distributed power generation. Foil air bearings are the most widespread technical solution well suited to design a reliable support system, although they cannot withstand a large number of start-stop cycles of the units. In order to overcome such limitation, we have recently proposed an innovative support system that takes advantage of spline couplings and two bearing types (e.g., air and rolling-element bearings). The devised support system employs splines as both convenient coupling systems and actuators for the load partition between the two bearing types. In the present work, the helical spline coupling is studied by means of structural FEM analyses including contact simulation in order to design the support system. Numerical results confirm previous findings in that the load transfer through the spline coupling is mainly a function of the helix angle. In addition, friction factor and structural stiffness cannot be neglected in the accurate design of the spline coupling. Such design parameters are now included in the proposed design procedure, which formerly assumed frictionless contact and rigid bodies.

Conjugate Heat Transfer and Film Cooling of a Multi-Stage Cooling Scheme

2008 ◽  
Author(s):  
M. Ghorab ◽  
S. I. Kim ◽  
I. Hassan
Keyword(s):  
Heat Transfer ◽  
Film Cooling ◽  
Gas Turbines ◽  
Conjugate Heat Transfer ◽  
Density Ratio ◽  
Design Parameters ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Multi Stage ◽  
Internal Gap

Cooling techniques play a key role in improving efficiency and power output of modern gas turbines. The conjugate technique of film and impingement cooling schemes is considered in this study. The Multi-Stage Cooling Scheme (MSCS) involves coolant passing from inside to outside turbine blade through two stages. The first stage; the coolant passes through first hole to internal gap where the impinging jet cools the external layer of the blade. Finally, the coolant passes through the internal gap to the second hole which has specific designed geometry for external film cooling. The effect of design parameters, such as, offset distance between two-stage holes, gap height, and inclination angle of the first hole, on upstream conjugate heat transfer rate and downstream film cooling effectiveness performance are investigated computationally. An Inconel 617 alloy with variable properties is selected for the solid material. The conjugate heat transfer and film cooling characteristics of MSCS are analyzed across blowing ratios of Br = 1 and 2 for density ratio, 2. This study presents upstream wall temperature distributions due to conjugate heat transfer for different gap design parameters. The maximum film cooling effectiveness with upstream conjugate heat transfer is less than adiabatic film cooling effectiveness by 24–34%. However, the full coverage of cooling effectiveness in spanwise direction can be obtained using internal cooling with conjugate heat transfer, whereas adiabatic film cooling effectiveness has narrow distribution.

scholarly journals A Two-Round Optimization Design Method for Aerostatic Spindles Considering the Fluid–Structure Interaction Effect

2021 ◽  
Vol 11 (7) ◽  
pp. 3017
Author(s):  
Qiang Gao ◽  
Siyu Gao ◽  
Lihua Lu ◽  
Min Zhu ◽  
Feihu Zhang
Keyword(s):  
Optimal Design ◽  
Optimization Design ◽  
Design Method ◽  
Fluid Structure Interaction ◽  
Design Procedure ◽  
Design Parameters ◽  
Geometrical Parameters ◽  
Fluid Structure ◽  
Structure Interaction ◽  
Aerostatic Spindle

The fluid–structure interaction (FSI) effect has a significant impact on the static and dynamic performance of aerostatic spindles, which should be fully considered when developing a new product. To enhance the overall performance of aerostatic spindles, a two-round optimization design method for aerostatic spindles considering the FSI effect is proposed in this article. An aerostatic spindle is optimized to elaborate the design procedure of the proposed method. In the first-round design, the geometrical parameters of the aerostatic bearing were optimized to improve its stiffness. Then, the key structural dimension of the aerostatic spindle is optimized in the second-round design to improve the natural frequency of the spindle. Finally, optimal design parameters are acquired and experimentally verified. This research guides the optimal design of aerostatic spindles considering the FSI effect.

Impact of Operating Conditions and Design Parameters on Gas Turbine Hot Section Creep Life

2010 ◽  
Author(s):  
S. Eshati ◽  
M. F. Abdul Ghafir ◽  
P. Laskaridis ◽  
Y. G. Li
Keyword(s):  
Gas Turbines ◽  
Performance Model ◽  
Operating Conditions ◽  
Creep Model ◽  
Design Parameters ◽  
Gas Temperature ◽  
Creep Life ◽  
Cooling Effectiveness ◽  
Radial Temperature ◽  
The Impact

This paper investigates the relationship between design parameters and creep life consumption of stationary gas turbines using a physics based life model. A representative thermodynamic performance model is used to simulate engine performance. The output from the performance model is used as an input to the physics based model. The model consists of blade sizing model which sizes the HPT blade using the constant nozzle method, mechanical stress model which performs the stress analysis, thermal model which performs thermal analysis by considering the radial distribution of gas temperature, and creep model which using the Larson-miller parameter to calculate the lowest blade creep life. The effect of different parameters including radial temperature distortion factor (RTDF), material properties, cooling effectiveness and turbine entry temperatures (TET) is investigated. The results show that different design parameter combined with a change in operating conditions can significantly affect the creep life of the HPT blade and the location along the span of the blade where the failure could occur. Using lower RTDF the lowest creep life is located at the lower section of the span, whereas at higher RTDF the lowest creep life is located at the upper side of the span. It also shows that at different cooling effectiveness and TET for both materials the lowest blade creep life is located between the mid and the tip of the span. The physics based model was found to be simple and useful tool to investigate the impact of the above parameters on creep life.

Performance Improvement Program for Kawasaki Gas Turbine

2017 ◽  
Author(s):  
Tomoki Taniguchi ◽  
Ryoji Tamai ◽  
Yoshihiko Muto ◽  
Satoshi Takami ◽  
Ryozo Tanaka ◽  
...  
Keyword(s):  
Gas Turbine ◽  
Thermal Performance ◽  
Film Cooling ◽  
Gas Turbines ◽  
Large Scale ◽  
New Technologies ◽  
Design Procedure ◽  
Product Line ◽  
Combined Cycle ◽  
Improvement Program

Kawasaki Heavy Industries, Ltd (KHI) has started a comprehensive program to further improve performance and availability of existing Kawasaki gas turbines. In the program, one of the Kawasaki’s existing gas turbine was selected from the broad product line and various kinds of technology were investigated and adopted to further improve its thermal performance and availability. The new technologies involve novel film cooling of turbine nozzles, advanced and large-scale numerical simulations, new thermal barrier coating. The thermal performance target is combined cycle efficiency of 51.6% and the target ramp rate is 20% load per minute. The program started in 2015 and engine testing has just started. In this paper, details of the program are described, focusing on design procedure.

scholarly journals Aero-Thermal Design and Testing of Advanced Turbine Blades

1997 ◽  
Author(s):  
M. Haendler ◽  
D. Raake ◽  
M. Scheurlen
Keyword(s):  
Gas Turbines ◽  
Full Range ◽  
Turbine Blades ◽  
Design Procedure ◽  
Thermal Design ◽  
Test Facility ◽  
Optical Pyrometer ◽  
Electrical Systems ◽  
Operation Conditions ◽  
Improved Performance

Based on the experience gained with more than 80 machines operating worldwide in 50 and 60 Hz electrical systems respectively, Siemens has developed a new generation of advanced gas turbines which yield substantially improved performance at a higher output level. This “3A-Series” comprises three gas turbine models ranging from 70 MW to 240 MW for 50 Hz and 60 Hz power generation applications. The first of the new advanced gas turbines with 170 MW and 3600 rpm was tested in the Berlin factory test facility under the full range of operation conditions. It was equipped with various measurement systems to monitor pressures, gas and metal temperatures, clearances, strains, vibrations and exhaust emissions. This paper presents the aero-thermal design procedure of the highly thermal loaded film cooled first stage blading. The predictions are compared with the extensive optical pyrometer measurements taken at the Siemens test facility on the V84.3A machine under full load conditions. The pyrometer was inserted at several locations in the turbine and radially moved giving a complete surface temperature information of the first stage vanes and blades.

Design Parameters Prediction of New Type Gas Turbine Based on a Hybrid GRA-SVM Prediction Model

2017 ◽  
Author(s):  
Tingting Wei ◽  
Dengji Zhou ◽  
Jinwei Chen ◽  
Yaoxin Cui ◽  
Huisheng Zhang
Keyword(s):  
Prediction Model ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Technology Development ◽  
Design Parameters ◽  
Support Vector ◽  
Performance Parameters ◽  
New Type ◽  
Equipment Manufacture ◽  
Grey Relational

Since the late 1930s, gas turbine has begun to develop rapidly. To improve the economic and safety of gas turbine, new types were generated frequently by Original Equipment Manufacture (OEM). In this paper, a hybrid GRA-SVM prediction model is established to predict the main design parameters of new type gas turbines, based on the combination of Grey Relational Analysis (GRA) and Support Vector Machine (SVM). The parameters are classified into two types, system performance parameters reflecting market demands and technology development, and component performance parameters reflecting technology development and coupling connections. The regularity based on GRA determines the prediction order, then new type gas turbine parameters can be predicted with known system parameters. The model is verified by the application to SGT600. In this way, the evolution rule can be obtained with the development of gas turbine technology, and the improvement potential of several components can be predicted which will provide supports for overall performance design.

Design Parameters for Spatial Helix Gearing Mechanism

2011 ◽  
Vol 121-126 ◽  
pp. 3215-3219 ◽  
Author(s):  
Yang Zhi Chen ◽  
Zhen Chen ◽  
Xiao Yan Fu
Keyword(s):  
Industrial Application ◽  
Theoretical Basis ◽  
Helix Angle ◽  
Design Parameters ◽  
Screw Pitch

The formulas of design parameters for spatial helix gearing mechanism are deduced based on the equation of spatial curve meshing, including teeth number, helix angle and screw pitch of driving tines, diameter of tines, corrected length of tines, height of teeth etc.. That could supply theoretical basis for industrial application of the spatial helix gearing mechanism

Fanno Design of Blow-Off Lines in Heavy Duty Gas Turbine

2013 ◽  
Author(s):  
Marco Cioffi ◽  
Enrico Puppo ◽  
Andrea Silingardi
Keyword(s):  
Gas Turbines ◽  
Gas Flow ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Design Procedure ◽  
Flow Equation ◽  
Heavy Duty ◽  
Cross Sectional ◽  
Pipe Length ◽  
Choked Flow

In typical heavy duty gas turbines the multistage axial compressor is provided with anti-surge pipelines equipped with on-off valves (blow-off lines), to avoid dangerous flow instabilities during start-ups and shut-downs. Blow-off lines show some very peculiar phenomena and somewhat challenging fluid dynamics, which require a deeper regard. In this paper the blow-off lines in axial gas turbines are analyzed by adopting an adiabatic quasi-unidimensional model of the gas flow through a pipe with a constant cross-sectional area and involving geometrical singularities (Fanno flow). The determination of the Fanno limit, on the basis of the flow equation and the second principle of thermodynamics, shows the existence of a critical pipe length which is a function of the pipe parameters and the initial conditions: for a length greater than this maximum one, the model requires a mass-flow reduction. In addition, in the presence of a regulating valve, so-called multi-choked flow can arise. The semi-analytical model has been implemented and the results have been compared with a three-dimensional CFD analysis and cross-checked with available field data, showing a good agreement. The Fanno model has been applied for the analysis of some of the actual machines in the Ansaldo Energia fleet under different working conditions. The Fanno tool will be part of the design procedure of new machines. In addition it will define related experimental activities.

scholarly journals Design of Biomechanical Legs with a Passive Toe Joint for Enhanced Human-like Walking

2017 ◽  
Vol 14 (2) ◽  
pp. 166 ◽  
Author(s):  
Riadh Zaier ◽  
A. Al-Yahmedi
Keyword(s):  
Design Procedure ◽  
Human Walking ◽  
Human Gait ◽  
Design Parameters ◽  
Sultan Qaboos University ◽  
Motion Trajectories ◽  
Normal Human ◽  
Working Principle ◽  
Mass Spring ◽  
Torsion Springs

This paper presents the design procedure of a biomechanical leg, with a passive toe joint, which is capable of mimicking the human walking. This leg has to provide the major features of human gait in the motion trajectories of the hip, knee, ankle, and toe joints. Focus was given to the approach of designing the passive toe joint of the biomechanical leg in its role and effectiveness in performing human like motion. This study was inspired by experimental and theoretical studies in the fields of biomechanics and robotics. Very light materials were mainly used in the design process. Aluminum and carbon fiber parts were selected to design the proposed structure of this biomechanical leg, which is to be manufactured in the Mechanical Lab of the Sultan Qaboos University (SQU). The capabilities of the designed leg to perform the normal human walking are presented. This study provides a noteworthy and unique design for the passive toe joint, represented by a mass-spring damper system, using torsion springs in the foot segment. The working principle and characteristics of the passive toe joint are discussed.  Four-designed cases, with different design parameters, for the passives toe joint system are presented to address the significant role that the passive toe joint plays in human-like motion. The dynamic motion that is used to conduct this comparison was the first stage of the stance motion. The advantages of the presence of the passive toe joint in gait, and its effect on reducing the energy consumption by the other actuated joints are presented and a comparison between the four-designed cases is discussed.

scholarly journals ARMOUR UNIT STRUCTURAL RESPONSE - A PARAMETRIC STUDY

1988 ◽  
Vol 1 (21) ◽  
pp. 176
Author(s):  
C. David Anglin ◽  
William F. Baird ◽  
Etienne P.D. Mansard ◽  
R. Douglas Scott ◽  
David J. Turcke
Keyword(s):  
Wave Height ◽  
Parametric Study ◽  
Structural Integrity ◽  
Design Procedure ◽  
Structural Response ◽  
Design Parameters ◽  
Coastal Structures ◽  
Log Normal ◽  
Wave Induced ◽  
Hydraulic Stability

There is a general lack of knowledge regarding the nature and magnitude of loads acting on armour units used for the protection of rubblemound coastal structures. Thus, a comprehensive design procedure incorporating both the hydraulic stability and the structural integrity of the armour units does not exist. This paper presents the results of a detailed parametric study of the structural response of armour units to wave-induced loading in a physical breakwater model. The effect of the following design parameters is investigated: breakwater slope, armour unit location, wave period and wave height. This research has made a number of significant contributions towards the development of a comprehensive design procedure for concrete armour units. It has identified a linear relationship between the wave-induced stress in the armour units and the incident wave height. In addition, it has shown that the conditional probability of waveinduced stress given wave height can be estimated by a log-normal distribution. Finally, a preliminary design chart has been developed which incorporates both the structural integrity and the hydraulic stability of the armour units.

Sign in / Sign up

Export Citation Format

Share Document