scholarly journals Optimize the Power Consumption and SNR of the 3D Photonic High-Radix Switch Architecture Based on Extra Channels and Redundant Rings

2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
Jie Jian ◽  
Mingche Lai ◽  
Liquan Xiao
Keyword(s):  
High Performance ◽  
Process Variation ◽  
Optical Switch ◽  
Signal To Noise Ratio ◽  
Thermal Sensitivity ◽  
Optical Network ◽  
Research Field ◽  
Switch Architecture ◽  
Static Power ◽  
High Radix

The demand from exascale computing has made the design of high-radix switch chips an attractive and challenging research field in EHPC (exascale high-performance computing). The static power, due to the thermal sensitivity and process variation of the microresonator rings, and the cross talk noise of the optical network become the main bottlenecks of the network’s scalability. This paper proposes the analyze model of the trimming power, process variation power, and signal-to-noise ratio (SNR) for the Graphein-based high-radix optical switch networks and uses the extra channels and the redundant rings to decrease the trimming power and the process variation power. The paper also explores the SNR under different configurations. The simulation result shows that when using 8 extra channels in the 64×64 crossbar optical network, the trimming power reduces almost 80% and the process variation power decreases 65% by adding 16 redundant rings in the 64×64 crossbar optical network. All of these schemes have little influence on the SNR. Meanwhile, the greater channel spacing has great advantages to decrease the static power and increase the SNR of the optical network.

Design and Analysis of AWG and FDL-Based Optical Switch in Data Centre Network

2021 ◽  
pp. 980-1001
Author(s):  
Vaibhav Shukla ◽  
Dilip Kumar Choubey
Keyword(s):  
High Performance ◽  
Optical Switch ◽  
Optical Network ◽  
Optical Networking ◽  
Internet Applications ◽  
Data Centre ◽  
Computing Services ◽  
Cloud Computing Services ◽  
Overall Performance ◽  
Networking Technologies

Optical networking technologies can play a significant role in the realization of grid and data centre systems. The new and developing internet applications are progressively becoming high performance and network based, and the performance of these applications are depending on the optical network and cloud computing services. In this chapter, the authors discuss the capabilities of optical transmission and the switching techniques. An AWG-based optical switch is discussed in the chapter and the performance of switch is measured in physical and network layer parameters. Design modifications in the switch is suggested, for improving the performance of switch. The overall performance of switch is also measured when the switch is placed into the network where cascading of two or more switches are required.

scholarly journals Graphene Nanoribbon Gap Waveguides for Dispersionless and Low-Loss Propagation with Deep-Subwavelength Confinement

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1302
Author(s):  
Zhiyong Wu ◽  
Lei Zhang ◽  
Tingyin Ning ◽  
Hong Su ◽  
Irene Ling Li ◽  
...  
Keyword(s):  
High Performance ◽  
Chemical Potential ◽  
Shape Change ◽  
Optical Switch ◽  
Pulse Amplitude ◽  
Propagation Distance ◽  
Graphene Nanoribbon ◽  
Low Loss ◽  
High Loss ◽  
On Chip

Surface plasmon polaritons (SPPs) have been attracting considerable attention owing to their unique capabilities of manipulating light. However, the intractable dispersion and high loss are two major obstacles for attaining high-performance plasmonic devices. Here, a graphene nanoribbon gap waveguide (GNRGW) is proposed for guiding dispersionless gap SPPs (GSPPs) with deep-subwavelength confinement and low loss. An analytical model is developed to analyze the GSPPs, in which a reflection phase shift is employed to successfully deal with the influence caused by the boundaries of the graphene nanoribbon (GNR). It is demonstrated that a pulse with a 4 μm bandwidth and a 10 nm mode width can propagate in the linear passive system without waveform distortion, which is very robust against the shape change of the GNR. The decrease in the pulse amplitude is only 10% for a propagation distance of 1 μm. Furthermore, an array consisting of several GNRGWs is employed as a multichannel optical switch. When the separation is larger than 40 nm, each channel can be controlled independently by tuning the chemical potential of the corresponding GNR. The proposed GNRGW may raise great interest in studying dispersionless and low-loss nanophotonic devices, with potential applications in the distortionless transmission of nanoscale signals, electro-optic nanocircuits, and high-density on-chip communications.

A High-Radix, Low-Latency Optical Switch for Data Centers

2015 ◽  
Author(s):  
Dan Alistarh ◽  
Hitesh Ballani ◽  
Paolo Costa ◽  
Adam Funnell ◽  
Joshua Benjamin ◽  
...  
Keyword(s):  
Data Centers ◽  
Optical Switch ◽  
Low Latency ◽  
High Radix

scholarly journals Novel Bloch wave excitation platform based on few-layer photonic crystal deposited on D-shaped optical fiber

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Esteban Gonzalez-Valencia ◽  
Ignacio Del Villar ◽  
Pedro Torres
Keyword(s):  
Optical Fibers ◽  
High Performance ◽  
Light Propagation ◽  
Fiber Optic ◽  
Layer Structure ◽  
Optical Network ◽  
Building Blocks ◽  
Bloch Wave ◽  
Nanophotonic Devices ◽  
Wide Range

AbstractWith the goal of ultimate control over the light propagation, photonic crystals currently represent the primary building blocks for novel nanophotonic devices. Bloch surface waves (BSWs) in periodic dielectric multilayer structures with a surface defect is a well-known phenomenon, which implies new opportunities for controlling the light propagation and has many applications in the physical and biological science. However, most of the reported structures based on BSWs require depositing a large number of alternating layers or exploiting a large refractive index (RI) contrast between the materials constituting the multilayer structure, thereby increasing the complexity and costs of manufacturing. The combination of fiber–optic-based platforms with nanotechnology is opening the opportunity for the development of high-performance photonic devices that enhance the light-matter interaction in a strong way compared to other optical platforms. Here, we report a BSW-supporting platform that uses geometrically modified commercial optical fibers such as D-shaped optical fibers, where a few-layer structure is deposited on its flat surface using metal oxides with a moderate difference in RI. In this novel fiber optic platform, BSWs are excited through the evanescent field of the core-guided fundamental mode, which indicates that the structure proposed here can be used as a sensing probe, along with other intrinsic properties of fiber optic sensors, as lightness, multiplexing capacity and easiness of integration in an optical network. As a demonstration, fiber optic BSW excitation is shown to be suitable for measuring RI variations. The designed structure is easy to manufacture and could be adapted to a wide range of applications in the fields of telecommunications, environment, health, and material characterization.

A High-Performance Signal Processing System for Monopulse Tracking Radar

2011 ◽  
Vol 383-390 ◽  
pp. 471-475
Author(s):  
Yong Bin Hong ◽  
Cheng Fa Xu ◽  
Mei Guo Gao ◽  
Li Zhi Zhao
Keyword(s):  
Signal Processing ◽  
High Performance ◽  
Dynamic Range ◽  
Signal To Noise Ratio ◽  
Processing System ◽  
Digital Signal ◽  
Radar Signal ◽  
Signal Processing System ◽  
Parallel Pipelined ◽  
Tracking Radar

A radar signal processing system characterizing high instantaneous dynamic range and low system latency is designed based on a specifically developed signal processing platform. Instantaneous dynamic range loss is a critical problem when digital signal processing is performed on fixed-point FPGAs. In this paper, the problem is well resolved by increasing the wordlength according to signal-to-noise ratio (SNR) gain of the algorithms through the data path. The distinctive software structure featuring parallel pipelined processing and “data flow drive” reduces the system latency to one coherent processing interval (CPI), which significantly improves the maximum tracking angular velocity of the monopulse tracking radar. Additionally, some important electronic counter-countermeasures (ECCM) are incorporated into this signal processing system.

scholarly journals High-speed high-resolution laser diode-based photoacoustic microscopy for in vivo microvasculature imaging

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Xiufeng Li ◽  
Victor T C Tsang ◽  
Lei Kang ◽  
Yan Zhang ◽  
Terence T W Wong
Keyword(s):  
High Resolution ◽  
High Speed ◽  
High Performance ◽  
Continuous Wave ◽  
Signal To Noise Ratio ◽  
Cost Effective ◽  
High Signal ◽  
Photoacoustic Microscopy ◽  
Mouse Ear

AbstractLaser diodes (LDs) have been considered as cost-effective and compact excitation sources to overcome the requirement of costly and bulky pulsed laser sources that are commonly used in photoacoustic microscopy (PAM). However, the spatial resolution and/or imaging speed of previously reported LD-based PAM systems have not been optimized simultaneously. In this paper, we developed a high-speed and high-resolution LD-based PAM system using a continuous wave LD, operating at a pulsed mode, with a repetition rate of 30 kHz, as an excitation source. A hybrid scanning mechanism that synchronizes a one-dimensional galvanometer mirror and a two-dimensional motorized stage is applied to achieve a fast imaging capability without signal averaging due to the high signal-to-noise ratio. By optimizing the optical system, a high lateral resolution of 4.8 μm has been achieved. In vivo microvasculature imaging of a mouse ear has been demonstrated to show the high performance of our LD-based PAM system.

Synthesis of red/black phosphorus-based composite nanosheets with Z-scheme heterostructure for high-performance cancer phototherapy

Nanoscale ◽  
2021 ◽  
Author(s):  
Yong Kang ◽  
Zhengjun Li ◽  
Fengying Lu ◽  
Zhiguo Su ◽  
Xiaoyuan Ji ◽  
...  
Keyword(s):  
High Performance ◽  
Research Field ◽  
Black Phosphorus ◽  
Two Dimensional ◽  
The Poor ◽  
Low Efficiency ◽  
Poor Stability

Two dimensional black phosphorus nanosheets (BP NS) have attracted plenty of attentions in the research field of cancer photonic therapy. However, the poor stability and relatively low efficiency in reactive...

scholarly journals Characteristics and Trends of Research on New Energy Vehicle Reliability Based on the Web of Science

2018 ◽  
Vol 10 (10) ◽  
pp. 3560 ◽  
Author(s):  
Xian Zhao ◽  
Siqi Wang ◽  
Xiaoyue Wang
Keyword(s):  
Electric Vehicle ◽  
Energy Demand ◽  
High Performance ◽  
High Energy ◽  
Research Field ◽  
High Energy Density ◽  
Future Research ◽  
Charging System ◽  
New Energy ◽  
New Energy Vehicle

In order to satisfy the increasing energy demand and deal with the environmental problem caused by the conventional energy vehicle; the new energy vehicle (NEV), especially the electric vehicle (EV), has attracted increasing attention and the corresponding research has developed rapidly in recent years. The electric vehicle requires a battery with high energy density and frequent charging. In order to ensure high performance of the electric vehicle; the reliability of its charging system is extremely important. In this paper; an overview of the research on electric vehicle charging system reliability from 1998 to 2017 is presented from a bibliometric perspective. This study provides a comprehensive analysis of the current research climate and the emerging trends from the following four aspects: basic characteristics of publication outputs; including annual publication outputs and document types; collaboration analysis of countries/territories; institutions and authors; co-citation analysis of cited authors and cited references; co-occurrence analysis of subjects and keywords. By using CiteSpace; the collaboration relationship; co-citation and co-occurrence networks are shown clearly. According to the analysis results; studies in this research field will keep developing rapidly in the near future and several future research directions are proposed in the conclusions.

scholarly journals Six-port optical switch for cluster-mesh photonic network-on-chip

Nanophotonics ◽  
2018 ◽  
Vol 7 (5) ◽  
pp. 827-835 ◽  
Author(s):  
Hao Jia ◽  
Ting Zhou ◽  
Yunchou Zhao ◽  
Yuhao Xia ◽  
Jincheng Dai ◽  
...  
Keyword(s):  
High Performance ◽  
Optical Switching ◽  
Optical Switch ◽  
Optical Signal ◽  
Network On Chip ◽  
Transmission Experiment ◽  
Photonic Network ◽  
Benes Network ◽  
On Chip ◽  
Spectral Responses

AbstractPhotonic network-on-chip for high-performance multi-core processors has attracted substantial interest in recent years as it offers a systematic method to meet the demand of large bandwidth, low latency and low power dissipation. In this paper we demonstrate a non-blocking six-port optical switch for cluster-mesh photonic network-on-chip. The architecture is constructed by substituting three optical switching units of typical Spanke-Benes network to optical waveguide crossings. Compared with Spanke-Benes network, the number of optical switching units is reduced by 20%, while the connectivity of routing path is maintained. By this way the footprint and power consumption can be reduced at the expense of sacrificing the network latency performance in some cases. The device is realized by 12 thermally tuned silicon Mach-Zehnder optical switching units. Its theoretical spectral responses are evaluated by establishing a numerical model. The experimental spectral responses are also characterized, which indicates that the optical signal-to-noise ratios of the optical switch are larger than 13.5 dB in the wavelength range from 1525 nm to 1565 nm. Data transmission experiment with the data rate of 32 Gbps is implemented for each optical link.

scholarly journals Rationally Designing Simple Rod-Like Amphiphilic NIR-Emissive AIE Probes for Precise In-Vivo Detection of Aβ Fibrils/Plaques at A Super-Early Stage

2021 ◽  
Author(s):  
Yipu Wang ◽  
Dong Mei ◽  
Xinyi Zhang ◽  
Da-Hui Qu ◽  
Ju Mei ◽  
...  
Keyword(s):  
High Performance ◽  
Ex Vivo ◽  
Early Stage ◽  
Signal To Noise Ratio ◽  
High Signal ◽  
In Vivo Detection ◽  
Different Strains ◽  
Aβ Fibrils

With increase of social aging, Alzheimer's disease (AD) has been one of the serious diseases threatening human health. The occurrence of A<i>β </i>fibrils<i> </i>or plaques is recognized as the hallmark of AD.<i> </i>Currently, optical imaging has stood out to be a promising technique for the imaging of A<i>β</i> fibrils/plaques and the diagnosis of AD. However, restricted by their poor blood-brain barrier (BBB) penetrability, short-wavelength excitation and emission, and aggregation-caused quenching (ACQ) effect, the clinically used gold-standard optical probes such as <a>thioflavin</a> T (ThT) and thioflavin S (ThS), are not effective enough in the early diagnosis of AD <i>in vivo</i>. Herein, we put forward an “all-in-one” design principle and demonstrate its feasibility in developing high-performance fluorescent probes which are specific to A<i>β</i> fibrils/plaques and promising for super-early <i>in</i>-<i>vivo</i> diagnosis of AD. As a proof of concept, a simple rod-like amphiphilic NIR fluorescent AIEgen, i.e., AIE-CNPy-AD, is developed by taking the specificity, BBB penetration ability, deep-tissue penetration capacity, high signal-to-noise ratio (SNR) into consideration. AIE-CNPy-AD is constituted by connecting the electron-donating and accepting moieties through single bonds and tagging with a propanesulfonate tail, giving rise to the NIR fluorescence, aggregation-induced emission (AIE) effect, amphiphilicity, and rod-like structure, which in turn result in high binding-affinity and excellent specificity to A<i>β</i> fibrils/plaques, satisfactory ability to penetrate BBB and deep tissues, ultrahigh SNR and sensitivity, and high-fidelity imaging capability. <i>In-vitro, ex-vivo,</i> and <i>in-vivo</i> <a>identifying of A<i>β</i> fibrils/plaques</a> in different strains of mice indicate that AIE-CNPy-AD holds the universality to the detection of A<i>β</i> fibrils/plaques. It is noteworthy that AIE-CNPy-AD is even able to trace the small and sparsely distributed A<i>β</i> fibrils/plaques in very young AD model mice such as 4-month-old APP/PS1 mice which are reported to be the youngest mice to have A<i>β</i> deposits in brains, suggesting its great potential in diagnosis and intervention of AD at a super-early stage.

Sign in / Sign up

Export Citation Format

Share Document