scholarly journals Impacts of Water Consumption in the Haihe Plain on the Climate of the Taihang Mountains, North China

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Jing Zou ◽  
Chesheng Zhan ◽  
Ruxin Zhao ◽  
Peihua Qin ◽  
Tong Hu ◽  
...  

In this study, the RegCM4 regional climate model was employed to investigate the impacts of water consumption in the Haihe Plain on the local climate in the nearby Taihang Mountains. Four simulation tests of twelve years’ duration were conducted with various schemes of water consumption by residents, industries, and agriculture. The results indicate that water exploitation and consumption in the Haihe Plain causes wetting and cooling of the local land surface and rapid increases in the depth of the groundwater table. These wetting and cooling effects increase atmospheric moisture, which is transported to surrounding areas, including the Taihang Mountains to the west. In a simulation where water consumption in the Haihe Plain was doubled, the wetting and cooling effects in the Taihang Mountains were enhanced but at less than double the amount, because a cooler land surface does not enhance atmospheric convective activities. The impacts of water consumption activities in the Haihe Plain were more obvious during the irrigation seasons (primarily spring and summer). In addition, the land surface variables in the Taihang Mountains, e.g., sensible and latent heat fluxes, were less sensitive to the climatic impacts due to the water consumption activities in the Haihe Plain because they were strongly affected by local surface energy balance.

Author(s):  
Kai Ernn Gan ◽  
Vijay Singh ◽  
Thian Gan ◽  
Chun Chao Kuo ◽  
Holger Schüttrumpf

A coupled atmospheric-hydrologic system models the complex interactions between the land surface and the atmospheric boundary layer, and the water-energy cycle from groundwater across the land surface to the top of the atmosphere. A regional climate model called WRF (Weather Research Forecasting) was coupled with a land surface scheme (Noah) to simulate intensive storms in central Alberta, Canada. Accounting for the land-atmosphere feedback enhances the predictability of the fine-tuned WRF-Noah system. Soil moisture, vegetation, and land surface temperature influence latent and sensible heat fluxes, and modulate both thermal and dynamical characteristics of land and lower atmosphere. WRF was set up in a two-way, three-domain nested framework so that the output of the outermost domain (D1) was used to run the second domain (D2) and the output of D2 was used to run the innermost domain (D3). In two-way nesting, D3 and D2 provide the feedback to their outer domains (D2 and D1), respectively. D3 was set at a 3-km resolution adequate to simulate convective storms. WRF-Noah was forced with climate outputs from Global Climate Models (GCMs) for the baseline period 1980–2005. A quantile-quantile bias correction method and a regional frequency analysis were applied to develop intensity-duration-frequency (IDF) curves from precipitation simulated by WRF-Noah. The simulated baseline precipitation of central Alberta agreed well with observed rain gauge data of Edmonton. The 5th‐generation NCAR mesoscale atmospheric model (MM5) was also set up in a 3-domain, but one-way nesting configuration. As expected, after bias correction, precipitation simulated by MM5 was less accurate than that simulated by WRF-Noah. For storms of short durations and return periods of more than 25 years, both MM5 driven by SRES climate scenarios of CMIP3 and WRF-Noah driven by RCP climate scenarios of CMIP5 projected storm intensities in central Alberta to increase from the base period to the 2050s, and to the 2080s.


2021 ◽  
Author(s):  
Yuan Qiu ◽  
Jinming Feng ◽  
Jun Wang ◽  
Yongkang Xue ◽  
Zhongfeng Xu

Abstract This study applies three widely used land models (SSiB, CLM, and Noah-MP) coupled in a regional climate model to quantitatively assess their skill in preserving the imposed ± 5℃ anomalies on the initial land surface and subsurface temperature (LST/SUBT) and generating the 2-m air temperature (T2m) anomalies over Tibetan Plateau (TP) during May-August. The memory of the LST/SUBT initial anomalies (surface/soil memory) is defined as the first time when time series of the differences in daily LST/SUBT cross the zero line during the simulation, with the unit of days. The memory of the T2m anomalies (T2m memory) is defined in the same way. The ensemble results indicate that the simulated soil memory generally increases with soil depth, which is consistent with the results based on the observations with statistic methods. And the soil memory is found to change rapidly with depth above ~ 0.6-0.7m and vary gradually below it. The land models have fairly long soil memories, with the regional mean 1.0-m soil memory generally longer than 60 days. However, they have short T2m memory, with the regional means generally below 20 days. This may bring a big challenge to use the LST/SUBT approach on sub-seasonal to seasonal (S2S) prediction. Comparison between the three land models shows that CLM and Noah-MP have longer soil memory at the deeper layers ( > ~ 0.05m) while SSiB has longer T2m/surface memories and near-surface (\(\le\)~0.05m) soil memory. As a result, it is difficult to say which land model is optimal for the application of the LST/SUBT approach on the S2S prediction. The T2m/surface/soil memories are various over TP, distinct among the land models, and different between the + 5℃ and − 5℃ experiment, which can be explained by both changes in the surface heat fluxes and variances in the hydrological processes over the plateau.


2020 ◽  
Author(s):  
Katrin Ziegler ◽  
Felix Pollinger ◽  
Daniel Abel ◽  
Heiko Paeth

<p class="western" align="justify"><span lang="en-US">In cooperation with the Climate Service Center Germany (GERICS) we want to improve the land surface module in the regional climate model REMO. Due to the need of high-resolution regional climate models to get information about local climate change, new data and new processes have to be integrated in these models.</span></p> <p class="western" align="justify"><span lang="en-US">Based on the REMO2015 version and focusing on EUR-CORDEX region we included and compared five different high-resolution topographic data sets. To improve the thermal and hydrological processes in the model’s soil we also tested three new soil data sets with a much higher spatial resolution and with new parameters for a new soil parameterization.</span></p>


2021 ◽  
Author(s):  
Stefan Hagemann ◽  
Ute Daewel ◽  
Volker Matthias ◽  
Tobias Stacke

<p>River discharge and the associated nutrient loads are important factors that influence the functioning of the marine ecosystem. Lateral inflows from land carrying fresh, nutrient-rich water determine coastal physical conditions and nutrient concentration and, hence, dominantly influence primary production in the system. Since this forms the basis of the trophic food web, riverine nutrient concentrations impact the variability of the whole coastal ecosystem. This process becomes even more relevant in systems like the Baltic Sea, which is almost decoupled from the open ocean and land-borne nutrients play a major role for ecosystem productivity on seasonal up to decadal time scales.</p><p> </p><p>In order to represent the effects of climate or land use change on nutrient availability, a coupled system approach is required to simulate the transport of nutrients across Earth system compartments. This comprises their transport within the atmosphere, the deposition and human application at the surface, the lateral transport over the land surface into the ocean and their dynamics and transformation in the marine ecosystem. In our study, we combine these processes in a modelling chain within the GCOAST (Geesthacht Coupled cOAstal model SysTem) framework for the northern European region. This modelling chain comprises:</p><p> </p><ul><li>Simulation of emissions, atmospheric transport and deposition with the chemistry transport model CMAQ at 36 km grid resolution using atmospheric forcing from the coastDat3 data that have been generated with the regional climate model COSMO-CLM over Europe at 0.11° resolution using ERA-Interim re-analyses as boundary conditions</li> <li>Simulation of inert processes at the land surface with the global hydrology model HydroPy (former MPI-HM), i.e. considering total nitrogen without any chemical reactions</li> <li>Riverine transport with the Hydrological Discharge (HD) model at 0.0833° spatial resolution</li> <li>Simulation of the North Sea and Baltic Sea ecosystems with 3D coupled physical-biogeochemical NPZD-model ECOSMO II at about 10 km resolution</li> </ul><p> </p><p>We will present first results and their validation from this exercise.</p><p> </p>


Author(s):  
He Sun ◽  
Fengge Su ◽  
Zhihua He ◽  
Tinghai Ou ◽  
Deliang Chen ◽  
...  

AbstractIn this study, two sets of precipitation estimates based on the regional Weather Research and Forecasting model (WRF) –the high Asia refined analysis (HAR) and outputs with a 9 km resolution from WRF (WRF-9km) are evaluated at both basin and point scales, and their potential hydrological utilities are investigated by driving the Variable Infiltration Capacity (VIC) large-scale land surface hydrological model in seven Third Pole (TP) basins. The regional climate model (RCM) tends to overestimate the gauge-based estimates by 20–95% in annual means among the selected basins. Relative to the gauge observations, the RCM precipitation estimates can accurately detect daily precipitation events of varying intensities (with absolute bias < 3 mm). The WRF-9km exhibits a high potential for hydrological application in the monsoon-dominated basins in the southeastern TP (with NSE of 0.7–0.9 and bias of -11% to 3%), while the HAR performs well in the upper Indus (UI) and upper Brahmaputra (UB) basins (with NSE of 0.6 and bias of -15% to -9%). Both the RCM precipitation estimates can accurately capture the magnitudes of low and moderate daily streamflow, but show limited capabilities in flood prediction in most of the TP basins. This study provides a comprehensive evaluation of the strength and limitation of RCMs precipitation in hydrological modeling in the TP with complex terrains and sparse gauge observations.


2017 ◽  
Vol 21 (1) ◽  
pp. 409-422 ◽  
Author(s):  
Jason P. Evans ◽  
Xianhong Meng ◽  
Matthew F. McCabe

Abstract. In this study, we have examined the ability of a regional climate model (RCM) to simulate the extended drought that occurred throughout the period of 2002 through 2007 in south-east Australia. In particular, the ability to reproduce the two drought peaks in 2002 and 2006 was investigated. Overall, the RCM was found to reproduce both the temporal and the spatial structure of the drought-related precipitation anomalies quite well, despite using climatological seasonal surface characteristics such as vegetation fraction and albedo. This result concurs with previous studies that found that about two-thirds of the precipitation decline can be attributed to the El Niño–Southern Oscillation (ENSO). Simulation experiments that allowed the vegetation fraction and albedo to vary as observed illustrated that the intensity of the drought was underestimated by about 10 % when using climatological surface characteristics. These results suggest that in terms of drought development, capturing the feedbacks related to vegetation and albedo changes may be as important as capturing the soil moisture–precipitation feedback. In order to improve our modelling of multi-year droughts, the challenge is to capture all these related surface changes simultaneously, and provide a comprehensive description of land surface–precipitation feedback during the droughts development.


2018 ◽  
Vol 10 (10) ◽  
pp. 1617 ◽  
Author(s):  
Yun Qin ◽  
Guoyu Ren ◽  
Tianlin Zhai ◽  
Panfeng Zhang ◽  
Kangmin Wen

Land surface temperature (LST) is an important parameter in the study of the physical processes of land surface. Understanding the surface temperature lapse rate (TLR) can help to reveal the characteristics of mountainous climates and regional climate change. A methodology was developed to calculate and analyze land-surface TLR in China based on grid datasets of MODIS LST and digital elevation model (DEM), with a formula derived on the basis of the analysis of the temperature field and the height field, an image enhancement technique used to calculate gradient, and the fuzzy c-means (FCM) clustering applied to identify the seasonal pattern of the TLR. The results of the analysis through the methodology showed that surface temperature vertical gradient inversion widely occurred in Northeast, Northwest, and North China in winter, especially in the Xinjiang Autonomous Region, the northern and the western parts of the Greater Khingan Mountains, the Lesser Khingan Mountains, and the northern area of Northwest and North China. Summer generally witnessed the steepest TLR among the four seasons. The eastern Tibetan Plateau showed a distinctive seasonal pattern, where the steepest TLR happened in winter and spring, with a shallower TLR in summer. Large seasonal variations of TLR could be seen in Northeast China, where there was a steep TLR in spring and summer and a strong surface temperature vertical gradient inversion in winter. The smallest seasonal variation of TLR happened in Central and Southwest China, especially in the Ta-pa Mountains and the Qinling Mountains. The TLR at very high altitudes (>5 km) was usually steeper than at low altitudes, in all months of the year.


2017 ◽  
Vol 145 (7) ◽  
pp. 2575-2595 ◽  
Author(s):  
Edoardo Mazza ◽  
Uwe Ulbrich ◽  
Rupert Klein

The processes leading to the tropical transition of the October 1996 medicane in the western Mediterranean are investigated on the basis of a 50-member ensemble of regional climate model (RCM) simulations. By comparing the composites of transitioning and nontransitioning cyclones it is shown that standard extratropical dynamics are responsible for the cyclogenesis and that the transition results from a warm seclusion process. As the initial thermal asymmetries and vertical tilt of the cyclones are reduced, a warm core forms in the lower troposphere. It is demonstrated that in the transitioning cyclones, the upper-tropospheric warm core is also a result of the seclusion process. Conversely, the warm core remains confined below 600 hPa in the nontransitioning systems. In the baroclinic stage, the transitioning cyclones are characterized by larger vertical wind shear and intensification rates. The resulting stronger low-level circulation in turn is responsible for significantly larger latent and sensible heat fluxes throughout the seclusion process.


Forests ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1551
Author(s):  
Jiaqi Zhang ◽  
Xiangjin Shen ◽  
Yanji Wang ◽  
Ming Jiang ◽  
Xianguo Lu

The area and vegetation coverage of forests in Changbai Mountain of China have changed significantly during the past decades. Understanding the effects of forests and forest coverage change on regional climate is important for predicting climate change in Changbai Mountain. Based on the satellite-derived land surface temperature (LST), albedo, evapotranspiration, leaf area index, and land-use data, this study analyzed the influences of forests and forest coverage changes on summer LST in Changbai Mountain. Results showed that the area and vegetation coverage of forests increased in Changbai Mountain from 2003 to 2017. Compared with open land, forests could decrease the summer daytime LST (LSTD) and nighttime LST (LSTN) by 1.10 °C and 0.07 °C, respectively. The increase in forest coverage could decrease the summer LSTD and LSTN by 0.66 °C and 0.04 °C, respectively. The forests and increasing forest coverage had cooling effects on summer temperature, mainly by decreasing daytime temperature in Changbai Mountain. The daytime cooling effect is mainly related to the increased latent heat flux caused by increasing evapotranspiration. Our results suggest that the effects of forest coverage change on climate should be considered in climate models for accurately simulating regional climate change in Changbai Mountain of China.


Sign in / Sign up

Export Citation Format

Share Document