scholarly journals Permeability Evolution and Particle Size Distribution of Saturated Crushed Sandstone under Compression

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Yanlong Chen ◽  
Bangyong Yu ◽  
Kai Zhang ◽  
Mingwei Zhang ◽  
Guang Xu ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Particle Size ◽  
Fractal Dimension ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Axial Stress ◽  
Permeability Evolution ◽  
Particle Crushing ◽  
X Ray ◽  
X Ray Computed

In this research, the particle size distribution and permeability of saturated crushed sandstone under variable axial stresses (0, 2, 4, 8, 12, and 16 MPa) were studied. X-ray Computed Tomography results revealed that particle crushing is likely to occur considerably as the axial stress is approaching 4 MPa, which results in the change of pore structure greatly. During compression, the particle size distribution satisfies the fractal condition well, and the fractal dimension of particle size distribution is an effective method for describing the particle crushing state of saturated crushed sandstone. When the axial stress increases from 0 MPa to 4 MPa, the fractal dimension of the particle size distribution increases rapidly by over 60% of the total increase (0–16 MPa), and the permeability decreases sharply by about 85% of the total decrease. These results indicate that 4 MPa is a key value in controlling the particle size distribution and the permeability of the saturated crushed sandstone under axial compression. The permeability is influenced by the initial gradation of the specimens, and a larger Talbot exponent corresponds to a larger permeability.

STRUCTURAL PARAMETERS OF AQUEOUS COLLOIDAL DISPERSIONS OF FULLERENE C60

2019 ◽  
pp. 31-37
Author(s):  
V.Yu. Fokina ◽  
E.А. Kizima ◽  
I.V. Miheev ◽  
A.I. Ivankov ◽  
V.M. Garamus
Keyword(s):  
Particle Size ◽  
Fractal Dimension ◽  
Particle Size Distribution ◽  
Structural Parameters ◽  
Colloidal Dispersions ◽  
Fullerene C60 ◽  
Solvent Exchange ◽  
X Ray ◽  
Dense Nucleus ◽  
Exchange Technique

Two types of fullerene C60 water dispersions were investigated by a small-angle X-ray and neutron scattering. As a result, structural parameters of fullerene aggregates were obtained. The water dispersions were obtained by the solvent-exchange technique and by huge dilution of initial C60/Nmethylpyrrolidone solution. The structure organization of water dispersions is considered in respect to their technique preparation. It was shown that fullerene aggregates were characterized by highly polydispersity in size for all dispersions. In the case of son/nC60 dispersion it was found that fullerenes formed aggregates with a dense nucleus (namely a surface fractal) with a radius of 58 ± 1 nm and a fractal dimension of 2.3. In turn, the nmp/nC60 system was characterized by the branched aggregates with fractal dimension 1.5 and bimodal particle size distribution.

X-ray fluorescence spectrometry for rapid screening of particle size in soils

2021 ◽  
Author(s):  
Maame Croffie ◽  
Paul N. Williams ◽  
Owen Fenton ◽  
Anna Fenelon ◽  
Karen Daly
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Soil Texture ◽  
Particle Size Analysis ◽  
Parent Material ◽  
Fluorescence Spectrometry ◽  
Rapid Screening ◽  
Size Analysis ◽  
X Ray

<p>Soil texture is an essential factor for effective land management in agricultural production. Knowledge of soil texture and particle size at field scale can aid with on-going soil management decisions. Standard soil physical and gravimetric methods for particle size analysis are time-consuming and X-ray fluorescence spectrometry (XRF) provides a rapid and cost-effective alternative. The objective of this study was to explore the use of XRF as a predictor for particle size. An extensive archive of Irish soils with particle size and soil texture data was used to select samples for XRF analysis. Regression and correlation analyses on XRF determined results showed that the relationship between Rb and % clay varied with soil type and was dependent on the parent material. There was a strong relationship (R > 0.62, R<sup>2</sup>>0.30, p<0.05) between Rb and clay for soils originating from bedrock such as limestones and slate. Contrastingly, no significant relationship (R<0.03, R<sup>2</sup>=0.00, p>0.05) exists between Rb and % clay for soils originating from granite and gneiss. Furthermore, there was a significant negative correlation (p<0.05) between Rb and % sand. The XRF is a useful technique for rough screening of particle size distribution in soils originating from certain parent materials. Thus, this may contribute to the rapid prediction of soil texture based on knowledge of the particle size distribution.</p><p> </p>

scholarly journals Green Preparation, Spheroidal, and Superior Property of Nano-1,3,5,7-Tetranittro-1,3,5,7-Tetrazocane

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Xinlei Jia ◽  
Jingyu Wang ◽  
Conghua Hou ◽  
Yingxin Tan
Keyword(s):  
Activation Energy ◽  
Particle Size ◽  
Fractal Dimension ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Fractal Theory ◽  
Crystal Form ◽  
Decomposition Temperature ◽  
Scanning Calorimetry ◽  
The Impact

Herein, a green process for preparing nano-HMX, mechanical demulsification shearing (MDS) technology, was developed. Nano-HMX was successfully fabricated via MDS technology without using any chemical reagents, and the fabrication mechanism was proposed. Based on the “fractal theory,” the optimal shearing time for mechanical emulsification was deduced by calculating the fractal dimension of the particle size distribution. The as-prepared nano-HMX was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and differential scanning calorimetry (DSC). And the impact sensitivities of HMX particles were contrastively investigated. The raw HMX had a lower fractal dimension of 1.9273. The ideal shearing time was 7 h. The resultant nano-HMX possessed a particle size distribution ranging from 203.3 nm to 509.1 nm as compared to raw HMX. Nano-HMX particles were dense spherical, maintaining β-HMX crystal form. In addition, they had much lower impact sensitivity. However, the apparent activation energy as well as thermal decomposition temperature of nano-HMX particles was decreased, attributing to the reduced probability for hotspot generation. Especially when the shearing time was 7 h, the activation energy was markedly decreased.

scholarly journals X-Ray Tomography Study on Porosity and Particle Size Distribution in In Situ Al-4.5Cu-5TiB2 Semisolid Rolled Composites

JOM ◽  
2019 ◽  
Vol 71 (11) ◽  
pp. 4050-4058 ◽  
Author(s):  
Swapnil Morankar ◽  
Monalisa Mandal ◽  
Nadia Kourra ◽  
Mark A. Williams ◽  
Rahul Mitra ◽  
...  
Keyword(s):  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
X Ray

Fractal Dimension and Lacunarity of Bulk Density Determined with X-ray Computed Tomography

1996 ◽  
Vol 60 (6) ◽  
pp. 1718-1724 ◽  
Author(s):  
Y. Zeng ◽  
R. L. Payton ◽  
C. J. Gantzer ◽  
S. H. Anderson
Keyword(s):  
Computed Tomography ◽  
Fractal Dimension ◽  
Bulk Density ◽  
X Ray ◽  
X Ray Computed
Sign in / Sign up

Export Citation Format

Share Document