scholarly journals Characterization of Colombian Clay and Its Potential Use as Adsorbent

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Iván Fernando Macías-Quiroga ◽  
Gloria Inés Giraldo-Gómez ◽  
Nancy Rocío Sanabria-González
Keyword(s):  
Aqueous Solution ◽  
Physicochemical Characterization ◽  
Nitrogen Adsorption ◽  
Xrd Analysis ◽  
Exchange Capacity ◽  
Hexadecyltrimethylammonium Bromide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Removal Of Heavy Metals

This paper presents a mineralogical and physicochemical characterization of a Colombian clay found in an area with the greatest exploitation potential of smectites and possible use as an adsorbent for the removal of chromium. The clay was characterized by using X-ray diffraction (XRD), cation exchange capacity (CEC), X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FT-IR), thermal analysis (TGA/DSC), and nitrogen adsorption at 77 K. The homoionized clay was used as an adsorbent for the removal of Cr(III) in an aqueous solution. The homoionized clay was modified with hexadecyltrimethylammonium bromide (HDTMA-Br), and the organoclay obtained was evaluated for the adsorption of Cr(VI) in aqueous solution. The XRD analysis showed that the clay from Armero-Guayabal is primarily constituted by smectite (48 wt%) followed by quartz mineral (21 wt%). The chemical analysis of bulk clay showed that the predominant oxides are SiO2 (55.81 wt%), Al2O3 (16.25 wt%), and Fe2O3 (7.51 wt%), and the nitrogen adsorption indicated that the bulk clay has a specific surface area of 45.1 m2/g. Homoionized clay and organoclay achieved Cr(III) and Cr(VI) removals greater than 85.05 ± 2.04% (pH between 3 and 4) and 82.93 ± 1.03% (pH between 3 and 5), respectively, proving the potential of these materials for the removal of heavy metals in an aqueous solution.

SEM, XRF, XRD, Nitrogen Adsorption, Fosters Swelling and Capacity Adsorption Characterization of Cloisite 30 B

2012 ◽  
Vol 727-728 ◽  
pp. 1591-1595 ◽  
Author(s):  
Aline Cadigena Lima Patrício ◽  
Marcílio Máximo da Silva ◽  
Anna Karoline Freires de Sousa ◽  
Mariaugusta Ferreira Mota ◽  
Meiry Glaúcia Freire Rodrigues
Keyword(s):  
Quaternary Ammonium ◽  
Cation Exchange Capacity ◽  
Nitrogen Adsorption ◽  
Exchange Capacity ◽  
X Ray Diffraction ◽  
Oil And Grease ◽  
X Ray ◽  
Quaternary Ammonium Cations ◽  
Cloisite 30B

Cationic surfactants, such as quaternary ammonium cations, have been used, in order to ameliorate the oil sorption capacity of inorganics materials, such as clays. Clays modified with quaternary ammonium cations (organoclays) have better performance in sorption, remove oil and grease from water at seven times the rate of activated carbon, as well as they can be used like perforation fluids of oil wells to the oil base, lubricants, among others industries. This work aims characterize the Cloisite 30B using various techniques: X-Ray Diffraction (XRD), Specific Surface Area (BET) and Cation Exchange Capacity. Different organic solvents, namely gasoline, diesel and kerosene were used in order to investigate the clays compatibility after orgophilization.

scholarly journals Rehydration Driven Na-Activation of Bentonite—Evolution of the Clay Structure and Composition

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7622
Author(s):  
Krzysztof Bahranowski ◽  
Agnieszka Klimek ◽  
Adam Gaweł ◽  
Ewa M. Serwicka
Keyword(s):  
Aqueous Solution ◽  
Fourier Transform ◽  
Cation Exchange Capacity ◽  
Ageing Time ◽  
Xrd Analysis ◽  
Exchange Capacity ◽  
X Ray Diffraction ◽  
Amorphous Calcium Carbonate ◽  
X Ray ◽  
Compositional Evolution

A new method of Na-activation of raw bentonite, rich in Ca-montmorillonite, consisting of combined thermal treatment at 200 °C, followed by immediate impregnation with aqueous solution of Na2CO3 of concentration corresponding to 0.5, 1.0, 1.5, or 2.0 cation exchange capacity (CEC) of clay, was investigated. Structural and compositional evolution of the activated solids after 1, 2, 3, and 4 weeks of storage was monitored by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). XRD analysis indicated that within the investigated period of ageing transformation to Na-rich montmorillonite required Na2CO3 concentration of at least 1.0 CEC. FTIR spectra showed that, depending on the Na2CO3 concentration and ageing time, formation of Na-rich montmorillonite was accompanied by precipitation of poorly crystalline calcite, amorphous calcium carbonate, gaylussite (a double calcium-sodium carbonate), and portlandite (Ca(OH)2).

Characterization and A Preliminary Study of TiO2 Synthesis from Lampung Iron Sand

2020 ◽  
Vol 849 ◽  
pp. 113-118
Author(s):  
Yayat Iman Supriyatna ◽  
Slamet Sumardi ◽  
Widi Astuti ◽  
Athessia N. Nainggolan ◽  
Ajeng W. Ismail ◽  
...  
Keyword(s):  
Food Packaging ◽  
Xrd Analysis ◽  
Major Elements ◽  
Raw Material ◽  
Solid Residue ◽  
X Ray Diffraction ◽  
X Ray ◽  
Leaching Solution ◽  
Ti Content

The purpose of this study is to characterize Lampung iron sand and to conduct preliminary experiments on the TiO2 synthesis which can be used for the manufacturing of functional food packaging. The iron sand from South Lampung Regency, Lampung Province that will be utilized as raw material. The experiment was initiated by sieving the iron sand on 80, 100, 150, 200 and 325 mesh sieves. Analysis using X-Ray Fluorescence (XRF) to determine the element content and X-Ray Diffraction (XRD) to observe the mineralization of the iron sand was conducted. The experiment was carried out through the stages of leaching, precipitation, and calcination. Roasting was applied firstly by putting the iron sand into the muffle furnace for 5 hours at a temperature of 700°C. Followed by leaching using HCl for 48 hours and heated at 105°C with a stirring speed of 300 rpm. The leaching solution was filtered with filtrate and solid residue as products. The solid residue was then leached using 10% H2O2 solution. The leached filtrate was heated at 105°C for 40 minutes resulting TiO2 precipitates (powder). Further, the powder was calcined and characterized. Characterization of raw material using XRF shows the major elements of Fe, Ti, Mg, Si, Al and Ca. The highest Ti content is found in mesh 200 with 9.6%, while iron content is about 80.7%. While from the XRD analysis, it shows five mineral types namely magnetite (Fe3O4), Rhodonite (Mn, Fe, Mg, Ca) SiO3, Quart (SiO2), Ilmenite (FeOTiO2) and Rutile (TiO2). The preliminary experiment showed that the Ti content in the synthesized TiO2 powder is 21.2%. The purity of TiO2 is low due to the presence of Fe metal which is dissolved during leaching, so that prior to precipitation purification is needed to remove impurities such as iron and other metals.

Removal of Heavy Metals from Aqueous Solution by Hydroxyapatite/Chitosan Composite

2013 ◽  
Vol 789 ◽  
pp. 176-179 ◽  
Author(s):  
Eny Kusrini ◽  
Nofrijon Sofyan ◽  
Dwi Marta Nurjaya ◽  
Santoso Santoso ◽  
Dewi Tristantini
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Metal Ions ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Removal Of Heavy Metals ◽  
Sem Micrograph ◽  
Pseudo Second Order ◽  
Chitosan Composite

Hydroxyapatite/chitosan (HApC) composite has been prepared by precipitation method and used for removal of heavy metals (Cr6+, Zn2+and Cd2+) from aqueous solution. The HAp and 3H7C composite with HAp:chitosan ratio of 3:7 (wt%) were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy-energy dispersive X-ray spectroscopy. The SEM results showed that HAp is spherical-shaped and crystalline, while chitosan has a flat structure. SEM micrograph of 3H7C composite reveals crystalline of HAp uniformly spread over the surface of chitosan. The crystal structure of HAp is maintained in 3H7C composite. Chitosan affects the adsorption capacity of HAp for heavy metal ions; it binds the metal ions as well as HAp. The kinetic data was best described by the pseudo-second order. Surface adsorption and intraparticle diffusion take place in the mechanism of adsorption process. The binding of HAp powder with chitosan made the capability of composite to removal of Cr6+, Zn2+and Cd2+from aqueous solution effective. The order of removal efficiency (Cr6+> Cd2+> Zn2+) was observed.

scholarly journals Assay and physicochemical characterization of the antiparasitic albendazole

2012 ◽  
Vol 48 (2) ◽  
pp. 281-290 ◽  
Author(s):  
Noely Camila Tavares Cavalcanti ◽  
Giovana Damasceno Sousa ◽  
Maria Alice Maciel Tabosa ◽  
José Lamartine Soares Sobrinho ◽  
Leila Bastos Leal ◽  
...  
Keyword(s):  
Physicochemical Characterization ◽  
Analytical Techniques ◽  
Assay Method ◽  
Active Pharmaceutical Ingredients ◽  
X Ray Diffraction ◽  
Melting Points ◽  
X Ray ◽  
Pharmaceutical Ingredients ◽  
Complementary Techniques

The aim of this study was to characterize three batches of albendazole by pharmacopeial and complementary analytical techniques in order to establish more detailed specifications for the development of pharmaceutical forms. The ABZ01, ABZ02, and ABZ03 batches had melting points of 208 ºC, 208 ºC, and 209 ºC, respectively. X-ray diffraction revealed that all three batches showed crystalline behavior and the absence of polymorphism. Scanning electron microscopy showed that all the samples were crystals of different sizes with a strong tendency to aggregate. The samples were insoluble in water (5.07, 4.27, and 4.52 mg mL-1, respectively) and very slightly soluble in 0.1 M HCl (55.10, 56.90, and 61.70 mg mL-1, respectively) and additionally showed purities within the range specified by the Brazilian Pharmacopoeia 5th edition (F. Bras. V; 98% to 102%). The pharmacopeial assay method was not reproducible and some changes were necessary. The method was validated and showed to be selective, specific, linear, robust, precise, and accurate. From this characterization, we concluded that pharmacopeial techniques alone are not able to detect subtle differences in active pharmaceutical ingredients; therefore, the use of other complementary techniques is required to ensure strict quality control in the pharmaceutical industry.

Production and Characterization of HVOF Sprayed NiCr-TiC Coatings Using SHS Powder Feedstock

2000 ◽  
Author(s):  
M.T. Blatchford ◽  
A.J. Horlock ◽  
D.G. McCartney ◽  
P.H. Shipway ◽  
J.V. Wood
Keyword(s):  
Thermal Spraying ◽  
Xrd Analysis ◽  
Powder Size ◽  
Coating Properties ◽  
X Ray Diffraction ◽  
Hvof Spraying ◽  
X Ray ◽  
Wear Rates ◽  
Powder Feedstock

Abstract In this paper, the production of NiCr-TiC powder by SHS, suitable for HVOF spraying, is discussed together with results on the microstructure and coating properties. Compacts for SHS were prepared by mixing elemental Ti and C with pre-alloyed Ni-20wt.% Cr powder to give an overall composition of 35wt.% NiCr and 65wt.% TiC. These were then ignited and a self-sustaining reaction proceeded to completion. Reacted compacts were crushed, sieved, and classified to give feedstock powders in size ranges of 10-45 µm and 45-75 µm. All powder was characterized prior to spraying based on particle size distribution, x-ray diffraction (XRD), and scanning electron microscopy (SEM/EDS). Thermal spraying was performed using both H2 and C3H6 as fuel gases in a UTP/Miller Thermal HVOF system. The resulting coatings were characterized by SEM and XRD analysis, and the microstructures correlated with powder size and spray conditions. Abrasive wear was determined by a modified 'dry sand rubber wheel' (DSRW) test and wear rates were measured. It has been found that wear rates comparable to those of HVOF sprayed WC-17wt% Co coatings can be achieved.

Characterization of Shivirtui Zeolite Modified with Aluminum Oxyhydroxide Nanofibers

2019 ◽  
Vol 942 ◽  
pp. 40-49
Author(s):  
Yulia Murashkina ◽  
Olga B. Nazarenko
Keyword(s):  
Chemical Properties ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
Scanning Electronic Microscopy ◽  
Electronic Microscopy ◽  
X Ray ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Aluminum Oxyhydroxide

Natural zeolite of Shivirtui deposit (Russia) was modified with nanofibers of aluminum oxyhydroxide AlOOH. Aluminum oxyhydroxide nanofibers were produced at the heating and oxidation of aluminum powder with water. The properties of modified zeolite were investigated by means of X-ray diffraction, transmission electronic microscopy, scanning electronic microscopy, low-temperature nitrogen adsorption, thermal analysis, and Fourier transform infrared spectroscopy. It was found that water content in the modified sample of zeolite was about 15 %. Based on the study of the physical and chemical properties, shivirtui zeolite modified with nanofibers of aluminum oxyhydroxide can be proposed for use as a flame-retardant additive to polymers.

Preparation of Magnetically Modified Zeolites and the Application of Metal Ions Adsorption

2011 ◽  
Vol 299-300 ◽  
pp. 764-769
Author(s):  
Ming Liang Yuan ◽  
Liang Yu ◽  
Jia Hua Tao ◽  
Cong Song
Keyword(s):  
Metal Ions ◽  
Industrial Effluents ◽  
Nitrogen Adsorption ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Detailed Characterization ◽  
X Ray ◽  
Magnetic Process ◽  
Coprecipitation Process

Natural zeolites combined with the magnetic iron oxides are prepared by a chemical coprecipitation process. A detailed characterization of our magnetically modified zeolite (MMZ) is given, including powder X-ray diffraction (XRD), nitrogen adsorption and vibrating sample magnetometer (VSM). The results reveal that in comparison with Na-zeolite, the structure of MMZ has no obvious change but its surface area increases from 25.13 m2g-1to 100.90 m2g-1. The adsorption properties of MMZ to Pb2+and Cu2+were studied. The results show that the maximum loading capacities for Pb2+and Cu2+in the initial concentration range are 123.74 and 14.633 mg g-1, respectively. The MMZ can be used as an adsorbent for removal of heavy metal ions from industrial effluents or municipal waters, and the saturated adsorbent is separated from the medium by a simple magnetic process.

Structural and IR-spectroscopic characterization of magnesium acesulfamate

2016 ◽  
Vol 71 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Oscar E. Piro ◽  
Gustavo A. Echeverría ◽  
Beatriz S. Parajón-Costa ◽  
Enrique J. Baran
Keyword(s):  
Crystal Structure ◽  
Aqueous Solution ◽  
Elemental Analysis ◽  
Spectroscopic Characterization ◽  
Magnesium Carbonate ◽  
X Ray Diffraction ◽  
Triclinic Space Group ◽  
X Ray ◽  
Ir Spectroscopic

AbstractMagnesium acesulfamate, Mg(C4H4NO4S)2·6H2O, was prepared by the reaction of acesulfamic acid and magnesium carbonate in aqueous solution, and characterized by elemental analysis. Its crystal structure was determined by single crystal X-ray diffraction methods. The substance crystallizes in the triclinic space group P1̅ with one molecule per unit cell. The FTIR spectrum of the compound was also recorded and is briefly discussed. Some comparisons with other simple acesulfamate and saccharinate salts are also made.

Microstructural Characterization of Glass-to-Metal Brazed Joint

2012 ◽  
Vol 616-618 ◽  
pp. 1732-1735 ◽  
Author(s):  
Xi Hai Shen ◽  
Yu Gang Zheng ◽  
Liang Chang ◽  
Jin Jia Guo ◽  
Song Bin Ye ◽  
...  
Keyword(s):  
Thermal Power ◽  
Microstructural Characterization ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solar Thermal Power ◽  
Brazed Joints ◽  
Brazed Joint ◽  
Scanning Electron

Aiming at the glass-to-metal seals serving in the Solar Thermal Power (STP), glass-to-metal vacuum brazed joints were studied. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis were performed to examine the microstructure and element contents of interface seam on the glass-to-metal vacuum brazed joints. Also, the compositional concentration of the interface seam was measured by using energy dispersive spectroscopy (EDS).

Sign in / Sign up

Export Citation Format

Share Document