scholarly journals Equivalent Viscous Damping Ratio Model for Flexure Critical Reinforced Concrete Columns

2018 ◽  
Vol 2018 ◽  
pp. 1-15
Author(s):  
Qin Zhang ◽  
Zong-yan Wei ◽  
Jin-xin Gong ◽  
Ping Yu ◽  
Yan-qing Zhang
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Damping Ratio ◽  
Hysteretic Behavior ◽  
Viscous Damping ◽  
Ratio Model ◽  
Rc Columns ◽  
Equivalent Viscous Damping ◽  
Rc Structures ◽  
Energy Dissipation Capacity

In order to determine the energy dissipation capacity of flexure critical reinforced concrete (RC) columns reasonably, an expression for describing the hysteretic behavior including loading and unloading characteristics of flexure critical RC columns is presented, and then, a new equivalent viscous damping (EVD) ratio model including its simplified format, which is interpreted as a function of a displacement ductility factor and a ratio of secant stiffness to yield stiffness of columns, is developed based on the proposed hysteretic loop expression and experimental data from the PEER column database. To illustrate the application of the proposed equivalent damping ratio model, a case study of pushover analysis on a flexure critical RC bridge with a single-column pier is provided. The analytical results are also compared with the results obtained by other models, which indicate that the proposed model is more general and rational in predicting energy dissipation capacity of flexure critical RC structures subjected to earthquake excitations.

Experimental Study on the Effect of Moisture Content on Hysteretic Behavior of Reinforced Concrete Columns

2018 ◽  
Vol 12 (1) ◽  
pp. 47-61
Author(s):  
Wenjuan Lv ◽  
Baodong Liu ◽  
Ming Li ◽  
Lin Li ◽  
Pengyuan Zhang
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Moisture Content ◽  
Early Stage ◽  
Damping Ratio ◽  
Concrete Columns ◽  
Hysteretic Behavior ◽  
Cyclic Test ◽  
Experimental Result ◽  
Reinforced Concrete Columns

Background: For reinforced concrete structures under different humid conditions, the mechanical properties of concrete are significantly affected by the moisture content, which may result in a great change of the functional performance and bearing capacity. Objective: This paper presents an experiment to investigate the influence of the moisture content on the dynamic characteristics and hysteretic behavior of reinforced concrete column. Results: The results show that the natural frequency of reinforced concrete columns increases quickly at an early stage of immersion, but there is little change when the columns are close to saturation; the difference between the natural frequencies before and after cyclic test grows as the moisture content rises. The damping ratio slightly decreases first and then increases with the increase of moisture content; the damping ratio after the cyclic test is larger than before the test due to the development of the micro-cracks. Conclusion: The trend of energy dissipation is on the rise with increasing moisture content, although at an early stage, it decreases slightly. According to the experimental result, a formula for the moisture content on the average energy dissipation of reinforced concrete columns is proposed.

scholarly journals Mechanical behaviour of precast prestressed reinforced concrete beam–column joints in elevated station platforms subjected to vertical cyclic loading

2021 ◽  
Vol 60 (1) ◽  
pp. 818-838
Author(s):  
Haiou Shi ◽  
Jinxia Zhao ◽  
Fangmu Chen ◽  
Junjin Lin ◽  
Jianhe Xie
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Mechanical Performance ◽  
Reinforced Concrete Beam ◽  
Lessons Learned ◽  
Urban Rail Transit ◽  
Rc Structures ◽  
Seismic Loadings ◽  
Column Joint ◽  
Energy Dissipation Capacity

Abstract Precast-reinforced concrete (RC) structures in urban rail transit projects can provide many advantages over their cast-in-place counterparts. However, lessons learned from past earthquakes show that beam-column joints may be a critical point of these structures and can overestimate the mechanical performance under vertical seismic loadings if not properly understood. This paper presents unbonded and bonded prestressed precast RC beam-column joints for elevated station platforms. Prestressed steel strands are used to provide joints with self-centring capacity. The performance of the proposed joints under vertical cyclic loadings is experimentally investigated and compared to that of monolithic joints in this study. The obtained results demonstrate the good properties of the proposed precast joints in terms of bearing capacity, energy dissipation capacity and ductility control. A comparison with a conventional monolithic beam-column joint indicates the better performance against earthquakes of the proposed precast prestressed joints, and the precast joint with symmetric prestressed steel strands in the top and bottom of the beam exhibits better flexural stiffness and energy dissipation capacity.

scholarly journals Cyclic Responses of Two-Side-Connected Precast-Reinforced Concrete Infill Panels with Different Slit Types

Buildings ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 16
Author(s):  
Guohua Sun ◽  
Fei Li ◽  
Qiyou Zhou
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Failure Mode ◽  
Damping Ratio ◽  
Concrete Strength ◽  
Plastic Hinge ◽  
Cyclic Behavior ◽  
Lateral Stiffness ◽  
Lateral Strength ◽  
Energy Dissipation Capacity

This study aimed to study the cyclic behavior of two-side-connected precast-reinforced concrete infill panel (RCIP). A total of four RCIP specimens with different slit types and height-to-span ratios modeled at a one-third scale were tested subjected to cyclic lateral loads. The failure mode, hysteretic behavior, lateral strength, stiffness degradation, ductility, and energy dissipation capacity of each RCIP specimen were determined and analyzed. The specimens experienced a similar damage process, which involved concrete cracking, steel rebar yielding, concrete crushing, and plastic hinge formation. All the specimens showed pinched hysteretic curves, resulting in a small energy dissipation capacity and a maximum equivalent viscous damping ratio lower than 0.2. The specimens with penetrated slits experienced ductile failure, in which flexural hinges developed at both slit wall ends. The application of penetrated slits decreased the initial stiffness and lateral load-bearing capacity of the RC panel but increased the deformation capacity, the average ultimate drift ratios ranged from 1.41% to 1.99%, and the lowest average ductility ratio reached 2.48. The specimens with high-strength concrete resulted in a small slip no more than 1 mm between the RC panel and steel beam, and the channel shear connectors ensured that the RC infill panel developed a reliable assembly with the surrounding steel components. However, specimens with concealed vertical slits (CVSs) and concealed hollow slits (CHSs) achieved significantly higher lateral stiffness and lateral strength values. Generally, the specimens exhibited two-stage mechanical features. The concrete in the CVSs and CHSs was crushed, and flexural plastic hinges developed at both ends of the slit walls during the second stage. With increasing concrete strength, the initial lateral stiffness and lateral strength values of the RCIP specimens increased. With an increasing height-to-span ratio, the lateral stiffness and strength of the RC panels with slits decreased, but the failure mode remained unchanged.

scholarly journals XFEM-Based Multiscale Simulation on Monotonic and Hysteretic Behavior of Reinforced-Concrete Columns

2020 ◽  
Vol 10 (21) ◽  
pp. 7899
Author(s):  
Hongbing Chen ◽  
Bin Xu ◽  
Jiang Wang ◽  
Xin Nie ◽  
Yi-Lung Mo
Keyword(s):  
Reinforced Concrete ◽  
Multiscale Simulation ◽  
Local Failure ◽  
Hysteretic Behavior ◽  
Multiscale Models ◽  
Rc Columns ◽  
Rc Structures ◽  
Beam Elements ◽  
Modeling Approach ◽  
Scale Models

The extended finite element method (XFEM) is efficient in simulating crack initiation and its evolution process for reinforced-concrete (RC) structures due to its ability to solve fracture problems. Moreover, the multiscale numerical simulation helps understand global and local failure behavior of RC structures simultaneously. In this study, the XFEM-based multiscale modeling approach was proposed to investigate the monotonic and hysteretic performance of RC columns. Firstly, two-scale models composed of fiber beam elements and XFEM-based solid elements with homogeneous material assumptions were established using compiled material subroutines for fiber beam elements. Secondly, the accuracy of XFEM-based two-scale analysis in predicting the hysteretic behavior of tested RC columns was verified by comparing the crack morphology and load-displacement curve obtained from tested specimens under different axial compression ratios (ACRs) and two-scale models using the concrete damaged plasticity (CDP) model. Thirdly, multiscale models of RC columns were constructed with fiber beam elements, XFEM-based solid elements and mesoscopic concrete models composed of mortar, interfacial transition zone (ITZ) and aggregates with different geometric shapes and distribution patterns. Finally, the XFEM-based multiscale simulation was employed to investigate the influence of mesoscale structure variation of concrete on both global behavior and local failure patterns of RC columns subjected to monotonic loading. The simulation results of multiscale models established with CDP model and XFEM were comparatively discussed in depth. The XFEM-based multiscale simulation developed in this study provides an efficient modeling approach for investigating the stochastic nature of cracking behavior in RC columns.

scholarly journals Design and Experimental Study on Shock-Absorbing Steel Bar with Limit Function for Bridges

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Zhaoguang Li ◽  
Ri Gao ◽  
Wei Jia
Keyword(s):  
Energy Dissipation ◽  
Damping Ratio ◽  
Hysteresis Curve ◽  
Limit Function ◽  
Viscous Damping ◽  
Initial Stiffness ◽  
Equivalent Viscous Damping ◽  
Steel Bar ◽  
Steel Bars ◽  
Equivalent Viscous Damping Ratio

The existing research on shock-absorbing steel bars is only limited to simply supported beam bridge. In order to expand the application of shock-absorbing steel bars to other fields, this paper develops a novel shock-absorbing steel bar with limit function, and it is suitable for continuous beam bridges. The structure and working mechanism of the shock-absorbing steel bar are analyzed. Three sets of specimens of the shock-absorbing steel bar are fabricated and then repeatedly loaded by the designed quasistatic loading device, in order to investigate their seismic performance parameters, including hysteresis curve, skeleton curve, and initial stiffness and equivalent viscous damping ratio. The results show that when the displacement of the specimen exceeds the initial gap, it enters the stage of energy dissipation and has a stable hysteresis curve and good fatigue resistance. Besides, the shock-absorbing device has a high initial stiffness and can provide stable bearing capacity after yielding. The equivalent viscous damping ratio reflects that the designed shock-absorbing steel bar has good energy dissipation capacity.

scholarly journals Estimation of Additional Equivalent Damping Ratio of the Damped Structure Based on Energy Dissipation

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Xiuyan Hu ◽  
Qingjun Chen ◽  
Dagen Weng ◽  
Ruifu Zhang ◽  
Xiaosong Ren
Keyword(s):  
Energy Dissipation ◽  
Damping Ratio ◽  
Theoretical Concept ◽  
Estimation Methods ◽  
External Excitation ◽  
Single Degree Of Freedom ◽  
Equivalent Damping ◽  
Seismic Motion ◽  
Practical Engineering ◽  
Energy Dissipation Capacity

In the design of damped structures, the additional equivalent damping ratio (EDR) is an important factor in the evaluation of the energy dissipation effect. However, previous additional EDR estimation methods are complicated and not easy to be applied in practical engineering. Therefore, in this study, a method based on energy dissipation is developed to simplify the estimation of the additional EDR. First, an energy governing equation is established to calculate the structural energy dissipation. By means of dynamic analysis, the ratio of the energy consumed by dampers to that consumed by structural inherent damping is obtained under external excitation. Because the energy dissipation capacity of the installed dampers is reflected by the additional EDR, the abovementioned ratio can be used to estimate the additional EDR of the damped structure. Energy dissipation varies with time, which indicates that the ratio is related to the duration of ground motion. Hence, the energy dissipation during the most intensive period in the entire seismic motion duration is used to calculate the additional EDR. Accordingly, the procedure of the proposed method is presented. The feasibility of this method is verified by using a single-degree-of-freedom system. Then, a benchmark structure with dampers is adopted to illustrate the usefulness of this method in practical engineering applications. In conclusion, the proposed method is not only explicit in the theoretical concept and convenient in application but also reflects the time-varying characteristic of additional EDR, which possesses the value in practical engineering.

A combined experimental and numerical analysis on the seismic behavior of short reinforced concrete columns with different structural sizes and axial compression ratios

2017 ◽  
Vol 27 (9) ◽  
pp. 1416-1447 ◽  
Author(s):  
Liu Jin ◽  
Shuai Zhang ◽  
Dong Li ◽  
Haibin Xu ◽  
Xiuli Du ◽  
...  
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
Axial Compression ◽  
Seismic Behavior ◽  
Load Capacity ◽  
Concrete Columns ◽  
Simulation Method ◽  
Reinforced Concrete Columns ◽  
Mesoscopic Simulation ◽  
Energy Dissipation Capacity

The results of an experimental program on eight short reinforced concrete columns having different structural sizes and axial compression ratios subjected to monotonic/cyclic lateral loading were reported. A 3D mesoscopic simulation method for the analysis of mechanical properties of reinforced concrete members was established, and then it was utilized as an important supplement and extension of the traditional experimental method. Lots of numerical trials, based on the restricted experimental results and the proposed 3D mesoscopic simulation method, were carried out to sufficiently evaluate the seismic performances of short reinforced concrete columns with different structural sizes and axial compression ratios. The test results indicate that (1) the failure pattern of reinforced concrete columns can be significantly affected by the shear-span ratio; (2) increasing the axial compression ratio could improve the load capacity of the reinforced concrete column, but the deformation capacity would be restricted and the failure mode would be more brittle, consequently the energy dissipation capacity could be deteriorated; and (3) the load capacity, the displacement ductility, and the energy dissipation capacity of the short reinforced concrete columns all exhibit clear size effect, namely, the size effect could significantly affect the seismic behavior of reinforced concrete columns.

PRELIMINARY STUDY ON NOVEL BEAM-TO-COLUMN CONNECTION BASED ON SMA PLATE

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Michael CH Yam ◽  
Ke Ke ◽  
Ping Zhang ◽  
Qingyang Zhao
Keyword(s):  
Friction Coefficient ◽  
Energy Dissipation ◽  
Numerical Study ◽  
Numerical Models ◽  
Numerical Technique ◽  
The Self ◽  
Hysteretic Behavior ◽  
The Novel ◽  
Energy Dissipation Capacity ◽  
Preliminary Study

A novel beam-to-column connection equipped with shape memory alloy (SMA) plates has been proposed to realize resilient performance under low-to-medium seismic actions. In this conference paper, the detailed 3D numerical technique calibrated by the previous paper is adopted to examine the hysteretic behavior of the novel connection. A parametric study covering a reasonable range of parameters including the thickness of the SMA plate, friction coefficient between SMA plate and beam flange and pre-load of the bolt was carried out and the influence of the parameters was characterized. In addition, the effect of the SMA Belleville washer on the connection performance was also studied. The results of the numerical study showed that the initial connection stiffness and the energy-dissipation capacity of the novel connection can be enhanced with the increase of the thickness of the SMA plate. In addition, the initial connection stiffness and energy-dissipation behavior of the novel connection can be improved by increasing the friction coefficient or pre-load of bolts, whereas the increased friction level could compromise the self-centering behavior of the connection. The hysteretic curves of the numerical models of the connection also implied that the SMA washers may contribute to optimizing the connection behavior by increasing the connection stiffness and energy-dissipation capacity without sacrificing the self-centering behavior.

Sign in / Sign up

Export Citation Format

Share Document