scholarly journals Experimental Investigation on the Deformation, Strength, and Acoustic Emission Characteristics of Sandstone under True Triaxial Compression

2018 ◽  
Vol 2018 ◽  
pp. 1-16 ◽  
Author(s):  
Zhaolin Li ◽  
Lianguo Wang ◽  
Yinlong Lu ◽  
Wenshuai Li ◽  
Kai Wang
Keyword(s):  
Acoustic Emission ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Lateral Strain ◽  
Compression Tests ◽  
True Triaxial ◽  
Shear Slip ◽  
True Triaxial Compression ◽  
Triaxial Compression Tests

The study of deformation, strength, and other mechanical characteristics of sandstone under true triaxial compression is significant for understanding failure mechanisms in rock and evaluating the stability of underground structures. Conventional and true triaxial compression tests for sandstone are conducted for different stress states in this study using the self-developed true triaxial electrohydraulic servo test system combined with acoustic emission (AE) testing. This study presents an in-depth and systematic investigation of deformation, strength, and AE characteristics. The results show significant differences in deformation, strength, and acoustic emission characteristics for the rock under conventional triaxial and true triaxial compression tests, respectively. The peak strength, axial strain, lateral strain, and incremental strain (in unstable crack growth stage) increase with increasing confining pressure under conventional triaxial compression, and the AE count gradually decreases while shear crack proportion gradually increases, indicating that increasing confining pressure gradually inhibits the shear slip effect along fractures, delays perforation of the rock shear fracture surface, and enhances the ability of the rock to withstand deformation and load. Under true triaxial compression, the peak strength increases and then decreases with increasing intermediate principal stress σ2 and the axial strain ε1 and lateral strain ε2 gradually decrease; besides, the lateral strain (expansion) of the rock is mainly in the minimum principal stress σ3 direction, and lateral expansion tends to decrease before increasing. AE events first weaken and then enhance with increasing σ2, and the proportion of shear cracks increases first and then decreases, indicating that the confining pressure gradually changes from the shear slip effect that controls crack offset to the damage effect that promotes crack tension with increasing σ2. In addition, the protective effect of confining pressure improves when σ3 increases.

Behavior of EPS geofoam in true triaxial compression tests

2008 ◽  
Vol 26 (2) ◽  
pp. 175-180 ◽  
Author(s):  
Chin Jian Leo ◽  
M Kumruzzaman ◽  
Henry Wong ◽  
Jin H Yin
Keyword(s):  
Triaxial Compression ◽  
Compression Tests ◽  
Eps Geofoam ◽  
True Triaxial ◽  
True Triaxial Compression ◽  
Triaxial Compression Tests

scholarly journals Semi-empirical elastic–thermoviscoplastic model for clay

2016 ◽  
Vol 53 (10) ◽  
pp. 1583-1599 ◽  
Author(s):  
David Kurz ◽  
Jitendra Sharma ◽  
Marolo Alfaro ◽  
Jim Graham
Keyword(s):  
Stress Level ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Compression Tests ◽  
One Dimensional ◽  
Load Duration ◽  
Compression Creep ◽  
Overconsolidated Clays ◽  
Semi Empirical ◽  
Triaxial Compression Tests

Clays exhibit creep in compression and shear. In one-dimensional compression, creep is commonly known as “secondary compression” even though it is also a significant component of deformations resulting from shear straining. It reflects viscous behaviour in clays and therefore depends on load duration, stress level, the ratio of shear stress to compression stress, strain rate, and temperature. Research described in the paper partitions strains into elastic (recoverable) and plastic (nonrecoverable) components. The plastic component includes viscous strains defined by a creep rate coefficient ψ that varies with plasticity index and temperature (T), but not with stress level or overconsolidation ratio (OCR). Earlier elastic–viscoplastic (EVP) models have been modified so that ψ = ψ(T) in a new elastic–thermoviscoplastic (ETVP) model. The paper provides a sensitivity analysis of simulated results from undrained (CIŪ) triaxial compression tests for normally consolidated and lightly overconsolidated clays. Axial strain rates range from 0.15%/day to 15%/day, and temperatures from 28 to 100 °C.

scholarly journals Triaxial Testing of Geosynthetics Reinforced Tailings with Different Reinforced Layers

Materials ◽  
2020 ◽  
Vol 13 (8) ◽  
pp. 1943
Author(s):  
Fu Yi ◽  
Changbo Du
Keyword(s):  
Triaxial Compression ◽  
Friction Angle ◽  
Confining Pressure ◽  
Test Results ◽  
Compression Tests ◽  
Strength Index ◽  
Stress Strain ◽  
High Confining Pressure ◽  
Zhang Model ◽  
Triaxial Compression Tests

To evaluate the shear properties of geotextile-reinforced tailings, triaxial compression tests were performed on geogrids and geotextiles with zero, one, two, and four reinforced layers. The stress–strain characteristics and reinforcement effects of the reinforced tailings with different layers were analyzed. According to the test results, the geogrid stress–strain curves show hardening characteristics, whereas the geotextile stress–strain curves have strain-softening properties. With more reinforced layers, the hardening or softening characteristics become more prominent. We demonstrate that the stress–strain curves of geogrids and geotextile reinforced tailings under different reinforced layers can be fitted by the Duncan–Zhang model, which indicates that the pseudo-cohesion of shear strength index increases linearly whereas the friction angle remains primarily unchanged with the increase in reinforced layers. In addition, we observed that, although the strength of the reinforced tailings increases substantially, the reinforcement effect is more significant at a low confining pressure than at a high confining pressure. On the contrary, the triaxial specimen strength decreases with the increase in the number of reinforced layers. Our findings can provide valuable input toward the design and application of reinforced engineering.

Mechanical Properties of Bentonite-Sand Mixtures Under Triaxial Stress Condition

1994 ◽  
Vol 353 ◽  
Author(s):  
M. Umedera ◽  
A. Fujiwara ◽  
N. Yasufuku ◽  
M. Hyodo ◽  
H. Murata
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Water Content ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Strength Properties ◽  
Compression Tests ◽  
Optimum Water Content ◽  
Triaxial Compression Tests ◽  
Optimum Water

AbstractA series of triaxial compression tests is being conducted under the drained condition on bentonite and sand mixtures, known as buffer, in saturated and optimum water content states to clarify the mechanical properties of the buffer.It was found that the mechanical properties of bentonite and sand mixtures are strongly influenced by water and bentonite contents: shear strength in a saturated state is less than that in an optimum water content state; shear strength decreases rapidly with increasing bentonite content. Strength properties are much dependent on confining pressure.

scholarly journals Experimental Study on the Permeability of Weakly Cemented Rock under Different Stress States in Triaxial Compression Tests

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Gangwei Fan ◽  
Mingwei Chen ◽  
Dongsheng Zhang ◽  
Zhen Wang ◽  
Shizhong Zhang ◽  
...  
Keyword(s):  
Underground Mining ◽  
Axial Strain ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Initial Permeability ◽  
Compression Tests ◽  
Mining Operations ◽  
Stress Strain ◽  
Loading And Unloading ◽  
Stress States

Mudstone and shaly coarse sandstone samples of Jurassic units in northwestern China were collected to study the seepage mechanism of weakly cemented rock affected by underground mining operations. Samples were studied using seepage experiments under triaxial compression considering two processes: complete stress-strain and postpeak loading and unloading. The results show that permeability variations closely correspond to deviatoric stress-axial strain during the process of complete stress-strain. The initial permeability is 7 times its minimum, contrasting with lesser differentials of initial, peak, and residual permeability. The magnitude of permeability ranges from 10−17 to 10−19 m2, representing a stable water-resisting property, and is 1 to 2 orders lower in mudstone than that in shaly coarse sandstone, indicating that the water-resisting property of the mudstone is much better than that of the shaly coarse sandstone. Permeability is negatively correlated with the confining pressure. In response to this pressure, the permeability change in mudstone is faster than that in shaly coarse sandstone during the process of postpeak loading and unloading. Weakly cemented rock has lower permeability according to the comparison with congeneric ordinary rocks. This distinction is more remarkable in terms of the initial permeability. Analyses based on scanning electron microscope (SEM) observations and mineral composition indicate that the samples are rich in clay minerals such as montmorillonite and kaolin, whose inherent properties of hydroexpansiveness and hydrosliming can be considered the dominant factors contributing to the seepage properties of weakly cemented rock with low permeability.

Experimental Study of Stress-Strain Characteristics of the Fly Ash Blended with Curing Agent

2010 ◽  
Vol 168-170 ◽  
pp. 1934-1942
Author(s):  
Zheng Shen ◽  
Lan Zong ◽  
Xiang Dong
Keyword(s):  
Fly Ash ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Uniaxial Stress ◽  
Curing Agent ◽  
Compression Tests ◽  
Growth Trend ◽  
Stress Strain ◽  
Confining Pressures ◽  
Triaxial Compression Tests

The stress-strain characteristics of the fly ash blended with curing agent was studied using uniaxial and triaxial compression tests. Curing agent JNS-2 was used as the stabilizing agents in sample preparation. Four curing agent JNS-2 contents of 3%, 6%, 9% and 12% were selected for sample preparation. UU triaxial compression tests were conducted in a range of confining pressures from 100 kPa to 300 kPa. The experimental results obtained from the laboratory tests showed that curing age, mixture ratio, compaction degree and confining pressures had significant influence on the shape of curves. Uniaxial stress-strain test results demonstrated that the latter strength and deformation characteristics of the fly ash blended with curing agent grew little and with the increase of curing agent amount and compaction factor, the curve of uniaxial stress-strain changed significantly. On the other hand, triaxial stress-strain test results indicted that the failure strain showed a partial negative growth trend with the increase of curing agent amount, and the failure stress showed a partial positive growth trend with the increase of curing agent amount. When the curve was at high confining pressure, it showed hardening type, when at low confining pressure it showed softening type.

Sign in / Sign up

Export Citation Format

Share Document