scholarly journals Symmetries, Dynamics, and Control for the 2D Kolmogorov Flow

Complexity ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-15
Author(s):  
Nejib Smaoui
Keyword(s):  
Numerical Simulations ◽  
Stokes Equations ◽  
Order System ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Number Range ◽  
Kolmogorov Flow ◽  
Dynamics And Control ◽  
Seventh Order ◽  
And Control

The symmetries, dynamics, and control problem of the two-dimensional (2D) Kolmogorov flow are addressed. The 2D Kolmogorov flow is known as the 2D Navier-Stokes (N-S) equations with periodic boundary conditions and with a sinusoidal external force along the x-direction. First, using the Fourier Galerkin method on the original 2D Navier-Stokes equations, we obtain a seventh-order system of nonlinear ordinary differential equations (ODEs) which approximates the behavior of the Kolmogorov flow. The dynamics and symmetries of the reduced seventh-order ODE system are analyzed through computer simulations for the Reynolds number range 0<Re<26.41. Extensive numerical simulations show that the obtained system is able to display the different behaviors of the Kolmogorov flow. Then, we design Lyapunov based controllers to control the dynamics of the system of ODEs to different attractors (e.g., a fixed point, a periodic orbit, or a chaotic attractor). Finally, numerical simulations are undertaken to validate the theoretical developments.

Analytical and Semi-empirical Models of Tornadoes and Downbursts

2021 ◽  
Author(s):  
Djordje Romanic ◽  
Horia Hangan
Keyword(s):  
Numerical Simulations ◽  
Stokes Equations ◽  
Empirical Models ◽  
Navier Stokes ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Boundary Layer Equations ◽  
Simplifying Assumptions ◽  
The Individual ◽  
Semi Empirical

Analytical and semi-empirical models are inexpensive to run and can complement experimental and numerical simulations for risk analysis-related applications. Some models are developed by employing simplifying assumptions in the Navier-Stokes equations and searching for exact, but many times inviscid solutions occasionally complemented by boundary layer equations to take surface effects into account. Other use simple superposition of generic, canonical flows for which the individual solutions are known. These solutions are then ensembled together by empirical or semi-empirical fitting procedures. Few models address turbulent or fluctuating flow fields, and all models have a series of constants that are fitted against experiments or numerical simulations. This chapter presents the main models used to provide primarily mean flow solutions for tornadoes and downbursts. The models are organized based on the adopted solution techniques, with an emphasis on their assumptions and validity.

Numerical Simulations of Nonlinear Post-Critical Vibrations of an Airfoil After Flutter Instability

2011 ◽  
Author(s):  
Jaromi´r Hora´cˇek ◽  
Miloslav Feistauer ◽  
Petr Sva´cˇek
Keyword(s):  
Numerical Simulations ◽  
Degrees Of Freedom ◽  
Stokes Equations ◽  
Mass Matrix ◽  
Vertical Direction ◽  
Navier Stokes ◽  
Computational Domain ◽  
Arbitrary Lagrangian Eulerian ◽  
Navier Stokes Equations ◽  
Classical Flutter

The contribution deals with the numerical simulation of the flutter of an airfoil with three degrees of freedom (3-DOF) for rotation around an elastic axis, oscillation in the vertical direction and rotation of a flap. The finite element (FE) solution of two-dimensional (2-D) incompressible Navier-Stokes equations is coupled with a system of nonlinear ordinary differential equations describing the airfoil vibrations with large amplitudes taking into account the nonlinear mass matrix. The time-dependent computational domain and a moving grid are treated by the Arbitrary Lagrangian-Eulerian (ALE) method and a suitable stabilization of the FE discretization is applied. The developed method was successfully tested by the classical flutter computation of the critical flutter velocity using NASTRAN program considering the linear model of vibrations and the double-lattice aerodynamic theory. The method was applied to the numerical simulations of the post flutter regime in time domain showing Limit Cycle Oscillations (LCO) due to nonlinearities of the flow model and vibrations with large amplitudes. Numerical experiments were performed for the airfoil NACA 0012 respecting the effect of the air space between the flap and the main airfoil.

Unsteady flow past a rotating circular cylinder at Reynolds numbers 103 and 104

1990 ◽  
Vol 220 ◽  
pp. 459-484 ◽  
Author(s):  
H. M. Badr ◽  
M. Coutanceau ◽  
S. C. R. Dennis ◽  
C. Ménard
Keyword(s):  
Reynolds Number ◽  
Circular Cylinder ◽  
Unsteady Flow ◽  
Rotation Rate ◽  
Stokes Equations ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Number Range ◽  
Flow Past

The unsteady flow past a circular cylinder which starts translating and rotating impulsively from rest in a viscous fluid is investigated both theoretically and experimentally in the Reynolds number range 103 [les ] R [les ] 104 and for rotational to translational surface speed ratios between 0.5 and 3. The theoretical study is based on numerical solutions of the two-dimensional unsteady Navier–Stokes equations while the experimental investigation is based on visualization of the flow using very fine suspended particles. The object of the study is to examine the effect of increase of rotation on the flow structure. There is excellent agreement between the numerical and experimental results for all speed ratios considered, except in the case of the highest rotation rate. Here three-dimensional effects become more pronounced in the experiments and the laminar flow breaks down, while the calculated flow starts to approach a steady state. For lower rotation rates a periodic structure of vortex evolution and shedding develops in the calculations which is repeated exactly as time advances. Another feature of the calculations is the discrepancy in the lift and drag forces at high Reynolds numbers resulting from solving the boundary-layer limit of the equations of motion rather than the full Navier–Stokes equations. Typical results are given for selected values of the Reynolds number and rotation rate.

scholarly journals Dynamic Behaviour of the Loads of Podded Propellers in Waves: Experimental and Numerical Simulations

2014 ◽  
Author(s):  
Patrick Queutey ◽  
Jeroen Wackers ◽  
Alban Leroyer ◽  
GanBo Deng ◽  
Emmanuel Guilmineau ◽  
...  
Keyword(s):  
Numerical Simulations ◽  
Stokes Equations ◽  
Scale Effects ◽  
Computational Study ◽  
Essential Feature ◽  
Flow Distribution ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Flow Solver ◽  
Wave Basin

The paper focuses on the hydrodynamic flow around a ship with pods in waves and compares the results of an experimental campaign with numerical simulations conducted during the EU-funded STREAMLINE project. It was the first project for which the effect of waves on cavitation and ventilation was explored in both experimental and numerical ways for a ship with pods. The measurements were carried out in MARIN’s Depressurized Wave Basin (DWB) with a fully instrumented podded ship model, in sailing condition, in waves and depressurised conditions. In this way, the correct representation of cavitation and possible ventilation bubbles and vortices is ensured, resulting in a correct physical behaviour. The discretisation of the Reynolds-Averaged Navier-Stokes Equations (RANSE) is based on the unstructured finite-volume flow solver ISIS-CFD developed by ECN-CNRS. An essential feature for full RANSE simulations with this code is the use of a sliding grid technique to simulate the real propeller rotating behind a ship hull. The computational study in operational service conditions considered here has been conducted to evaluate the instantaneous flow distribution around the podded propellers and to analyse and to compare the unsteady behaviour of the forces induced by the rotating propeller in waves with the measurements from omnidirectional propeller loads as well as the blade forces and moments. The computational study has been done in model and full scale to evaluate the scale effects.

Mathematical Modeling of Pneumatic Pipes in a Simulation of Heterogeneous Engineering Systems

2011 ◽  
Vol 133 (12) ◽  
Author(s):  
Zbigniew Kamiński
Keyword(s):  
Stokes Equations ◽  
Navier Stokes ◽  
Engineering Systems ◽  
Test Results ◽  
Navier Stokes Equations ◽  
Kolmogorov Smirnov ◽  
Complex Fluid ◽  
Control Circuits ◽  
Drive And Control ◽  
And Control

Pipes are widely used in hydraulic and pneumatic subsystems for transferring energy or signals. Accurate prediction of pressure transients is very important in the drive and control circuits of complex fluid-line systems. Based on the approximation of Navier-Stokes equations for one-dimensional flow, a mathematical model of the pneumatic pipe with lumped parameters was developed using ordinary differential equations, which can be easily implemented in most computer programs for the simulation of complex heterogeneous engineering systems. Implemented in Matlab-Simulink software, the computer model of the pipe makes it possible to determine the influence of capacitance, inertance, resistance and heat exchange on the dynamic characteristics of the control and power circuits of pneumatic systems. An advantage of the model is that various functions can be selected to describe linear resistances and local resistances are taken into account, particularly at the inlet and outlet. Such resistances largely affect flow resistances in short tubes (up to 10 m) that can be found, e.g., in pneumatic brake systems of road vehicles. Confirmed by Kolmogorov-Smirnov test results, the consistency of the pressure curves obtained in experimental and simulation tests proves the implemented tube model to be useful for the calculations of pneumatic system dynamics.

Sign in / Sign up

Export Citation Format

Share Document