scholarly journals CFD Prediction of Airfoil Drag in Viscous Flow Using the Entropy Generation Method

2018 ◽  
Vol 2018 ◽  
pp. 1-15
Author(s):  
Wei Wang ◽  
Jun Wang ◽  
Hui Liu ◽  
Bo-yan Jiang
Keyword(s):  
Flow Field ◽  
Viscous Flow ◽  
Turbulent Flows ◽  
Entropy Generation ◽  
Aerodynamic Force ◽  
Pressure Coefficient ◽  
Generation Rate ◽  
Momentum Balance ◽  
Entropy Generation Rate ◽  
Prediction Approach

A new aerodynamic force of drag prediction approach was developed to compute the airfoil drag via entropy generation rate in the flow field. According to the momentum balance, entropy generation and its relationship to drag were derived for viscous flow. Model equations for the calculation of the local entropy generation in turbulent flows were presented by extending the RANS procedure to the entropy balance equation. The accuracy of algorithm and programs was assessed by simulating the pressure coefficient distribution and dragging coefficient of different airfoils under different Reynolds number at different attack angle. Numerical data shows that the total entropy generation rate in the flow field and the drag coefficient of the airfoil can be related by linear equation, which indicates that the total drag could be resolved into entropy generation based on its physical mechanism of energy loss.

Thermal behavior and entropy generation rate analysis of a viscous flow in MHD micropumps

2012 ◽  
Vol 26 (6) ◽  
pp. 1949-1955 ◽  
Author(s):  
Mehdi Kiyasatfar ◽  
Nader Pourmahmoud ◽  
Mir Maqsood Golzan ◽  
Iraj Mirzaee
Keyword(s):  
Thermal Behavior ◽  
Viscous Flow ◽  
Entropy Generation ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Rate Analysis

scholarly journals Conditionally-Sampled Turbulent and Nonturbulent Measurements of Entropy Generation Rate in the Transition Region of Boundary Layers

2007 ◽  
Vol 129 (5) ◽  
pp. 659-664 ◽  
Author(s):  
Edmond J. Walsh ◽  
Kevin P. Nolan ◽  
Donald M. McEligot ◽  
Ralph J. Volino ◽  
Adrian Bejan
Keyword(s):  
Boundary Layer ◽  
Transition Region ◽  
Turbulent Flows ◽  
Entropy Generation ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Transitional Boundary Layer ◽  
Intermittency Factor ◽  
First Time ◽  
Steady Laminar

Conditionally-sampled boundary layer data for an accelerating transitional boundary layer have been analyzed to calculate the entropy generation rate in the transition region. By weighing the nondimensional dissipation coefficient for the laminar-conditioned-data and turbulent-conditioned-data with the intermittency factor γ the average entropy generation rate in the transition region can be determined and hence be compared to the time averaged data and correlations for steady laminar and turbulent flows. It is demonstrated that this method provides, for the first time, an accurate and detailed picture of the entropy generation rate during transition. The data used in this paper have been taken from detailed boundary layer measurements available in the literature. This paper provides, using an intermittency weighted approach, a methodology for predicting entropy generation in a transitional boundary layer.

Analysis of the Effects of Joule Heating and Viscous Dissipation on Combined Pressure-Driven and Electrokinetic Flows in a Two-Parallel Plate Channel with Unequal Constant Temperatures

2018 ◽  
Vol 233 (4) ◽  
pp. 871-879 ◽  
Author(s):  
Harshad Sanjay Gaikwad ◽  
Pranab Kumar Mondal ◽  
Dipankar Narayan Basu ◽  
Nares Chimres ◽  
Somchai Wongwises
Keyword(s):  
Viscous Dissipation ◽  
Entropy Generation ◽  
Joule Heating ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Local Entropy ◽  
Temperature Dependent ◽  
Temperature Dependent Viscosity ◽  
Dependent Viscosity ◽  
Local Entropy Generation

In this article, we perform an entropy generation analysis for the micro channel heat sink applications where the flow of fluid is actuated by combined influences of applied pressure gradient and electric field under electrical double layer phenomenon. The upper and lower walls of the channels are kept at different constant temperatures. The temperature-dependent viscosity of the fluid is considered and hence the momentum equation and energy equations are coupled in this study. Also, a hydrodynamic slip condition is employed on the viscous dissipation. For complete analysis of the entropy generation, we use a perturbation approach with lubrication approximation. In this study, we discuss the results depicting variations in the velocity and temperature distributions and their effect on local entropy generation rate and Bejan number in the system. It can be summarized from this analysis that the enhanced velocity gradients in the flow field due to combined effect of temperature-dependent viscosity and Joule heating and viscous dissipative effects, leads to an enhancement in the local entropy generation rate in the system.

Aerodynamic Optimization Design of Airfoil Shape Using Entropy Generation as an Objective

2018 ◽  
Vol 11 (2) ◽  
Author(s):  
Wei Wang ◽  
Jun Wang ◽  
Xiao-Pei Yang ◽  
Yan-Yan Ding
Keyword(s):  
Entropy Generation ◽  
Energy Cost ◽  
Optimization Design ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Aerodynamic Optimization ◽  
Analysis And Design ◽  
Constraint Model ◽  
The Impact ◽  
Drag Ratio

Abstract An entropy analysis and design optimization methodology is combined with airfoil shape optimization to demonstrate the impact of entropy generation on aerodynamics designs. In the work herein, the entropy generation rate is presented as an extra design objective along with lift-drag ratio, while the lift coefficient is the constraint. Model equation, which calculates the local entropy generation rate in turbulent flows, is derived by extending the Reynolds-averaging of entropy balance equation. The class-shape function transform (CST) parametric method is used to model the airfoil configuration and combine the radial basis functions (RBFs) based mesh deformation technique with flow solver to compute the quantities such as lift-drag ratio and entropy generation at the design condition. From the multi-objective solutions which represent the best trade-offs between the design objectives, one can select a set of airfoil shapes with a low relative energy cost and with improved aerodynamic performance. It can be concluded that the methodology of entropy generation analysis is an effective tool in the aerodynamic optimization design of airfoil shape with the capability of determining the amount of energy cost.

The Role of Fin Geometry in Heat Sink Performance

2006 ◽  
Vol 128 (4) ◽  
pp. 324-330 ◽  
Author(s):  
W. A. Khan ◽  
J. R. Culham ◽  
M. M. Yovanovich
Keyword(s):  
Reynolds Number ◽  
Aspect Ratio ◽  
Entropy Generation ◽  
Heat Sink ◽  
Control Volume ◽  
Generation Rate ◽  
Heat Transfer Fluid ◽  
Entropy Generation Rate ◽  
Minimum Entropy ◽  
Axis Ratio

The following study will examine the effect on overall thermal/fluid performance associated with different fin geometries, including, rectangular plate fins as well as square, circular, and elliptical pin fins. The use of entropy generation minimization, EGM, allows the combined effect of thermal resistance and pressure drop to be assessed through the simultaneous interaction with the heat sink. A general dimensionless expression for the entropy generation rate is obtained by considering a control volume around the pin fin including base plate and applying the conservations equations for mass and energy with the entropy balance. The formulation for the dimensionless entropy generation rate is developed in terms of dimensionless variables, including the aspect ratio, Reynolds number, Nusselt number, and the drag coefficient. Selected fin geometries are examined for the heat transfer, fluid friction, and the minimum entropy generation rate corresponding to different parameters including axis ratio, aspect ratio, and Reynolds number. The results clearly indicate that the preferred fin profile is very dependent on these parameters.

Second-Law Analysis on Wavy Plate Fin-and-Tube Heat Exchangers

1998 ◽  
Vol 120 (3) ◽  
pp. 797-800 ◽  
Author(s):  
W. W. Lin ◽  
D. J. Lee
Keyword(s):  
Entropy Generation ◽  
Operating Conditions ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Second Law ◽  
Spanwise Direction ◽  
Minimum Entropy ◽  
Tube Heat Exchanger ◽  
Second Law Analysis ◽  
Minimum Entropy Generation

Second-law analysis on the herringbone wavy plate fin-and-tube heat exchanger was conducted on the basis of correlations of Nusselt number and friction factor proposed by Kim et al. (1997), from which the entropy generation rate was evaluated. Optimum Reynolds number and minimum entropy generation rate were found over different operating conditions. At a fixed heat duty, the in-line layout with a large tube spacing along streamwise direction was recommended. Furthermore, within the valid range of Kim et al.’s correlation, effects of the fin spacing and the tube spacing along spanwise direction on the second-law performance are insignificant.

scholarly journals Entropy Generation Rates in Two-Dimensional Rayleigh–Taylor Turbulence Mixing

Entropy ◽  
2018 ◽  
Vol 20 (10) ◽  
pp. 738 ◽  
Author(s):  
Xinyu Yang ◽  
Haijiang He ◽  
Jun Xu ◽  
Yikun Wei ◽  
Hua Zhang
Keyword(s):  
Time Evolution ◽  
Entropy Generation ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Two Dimensional ◽  
Spatial Averaging ◽  
Mixing Process ◽  
Thermal Entropy ◽  
Large Gradient ◽  
Turbulence Mixing

Entropy generation rates in two-dimensional Rayleigh–Taylor (RT) turbulence mixing are investigated by numerical calculation. We mainly focus on the behavior of thermal entropy generation and viscous entropy generation of global quantities with time evolution in Rayleigh–Taylor turbulence mixing. Our results mainly indicate that, with time evolution, the intense viscous entropy generation rate s u and the intense thermal entropy generation rate S θ occur in the large gradient of velocity and interfaces between hot and cold fluids in the RT mixing process. Furthermore, it is also noted that the mixed changing gradient of two quantities from the center of the region to both sides decrease as time evolves, and that the viscous entropy generation rate ⟨ S u ⟩ V and thermal entropy generation rate ⟨ S θ ⟩ V constantly increase with time evolution; the thermal entropy generation rate ⟨ S θ ⟩ V with time evolution always dominates in the entropy generation of the RT mixing region. It is further found that a “smooth” function ⟨ S u ⟩ V ∼ t 1 / 2 and a linear function ⟨ S θ ⟩ V ∼ t are achieved in the spatial averaging entropy generation of RT mixing process, respectively.

Thermodynamical Comparisons of Four Types of Regenerators in Cryocoolers

2012 ◽  
Vol 433-440 ◽  
pp. 1359-1365
Author(s):  
Yong Fei Guo ◽  
Hua Zhang ◽  
Xi Chen ◽  
Qiang Wang
Keyword(s):  
Entropy Generation ◽  
Process Model ◽  
Gas Flow ◽  
Irreversible Process ◽  
Unit Length ◽  
Generation Rate ◽  
Irreversible Processes ◽  
Entropy Generation Rate ◽  
Mesh Screen ◽  
The Matrix

Comparisons between the mesh screen, parallel wire, etched foil and sphere beds regenerators have been made base on the calculation of entropy generation rate per unit length in the four irreversible processes. The irreversible process model of heat conduction of gas and matrix, gas flow resistance and heat exchange between gas and matrix are respectively analyzed. Based on the software Regen3.3 user manual, the entropy generation rate per unit length are calculated and compared between the four regenerators. It is indicated that the irreversible processes loss in the cold end plays the key role in the whole regenerator, and it is an important way to improve the regeneration efficient by optimizing the matrix geometries and the material properties at the cold end.

Sign in / Sign up

Export Citation Format

Share Document