scholarly journals Modeling Simultaneous Multiple Fracturing Using the Combined Finite-Discrete Element Method

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-20 ◽  
Author(s):  
Quansheng Liu ◽  
Lei Sun ◽  
Pingli Liu ◽  
Lei Chen
Keyword(s):  
Hydraulic Fracturing ◽  
Solid Phase ◽  
Horizontal Wells ◽  
In Situ Stress ◽  
Gas Production ◽  
Hydraulic Fractures ◽  
Multiple Fractures ◽  
Fracture Geometry ◽  
Stress Shadow ◽  
Oil Gas

Simultaneous multiple fracturing is a key technology to facilitate the production of shale oil/gas. When multiple hydraulic fractures propagate simultaneously, there is an interaction effect among these propagating hydraulic fractures, known as the stress-shadow effect, which has a significant impact on the fracture geometry. Understanding and controlling the propagation of simultaneous multiple hydraulic fractures and the interaction effects between multiple fractures are critical to optimizing oil/gas production. In this paper, the FDEM simulator and a fluid simulator are linked, named FDEM-Fluid, to handle hydromechanical-fracture coupling problems and investigate the simultaneous multiple hydraulic fracturing mechanism. The fractures propagation and the deformation of solid phase are solved by FDEM; meanwhile the fluid flow in the fractures is modeled using the principle of parallel-plate flow model. Several tests are carried out to validate the application of FDEM-Fluid in hydraulic fracturing simulation. Then, this FDEM-Fluid is used to investigate simultaneous multiple fractures treatment. Fractures repel each other when multiple fractures propagate from a single horizontal well, while the nearby fractures in different horizontal wells attract each other when multiple fractures propagate from multiple parallel horizontal wells. The in situ stress also has a significant impact on the fracture geometry.

Can We Engineer Better Multistage Horizontal Completions? Evidence of the Importance of Near-wellbore Fracture Geometry from Theory, Lab and Field Experiments

2015 ◽  
Author(s):  
B.. Lecampion ◽  
J.. Desroches ◽  
X.. Weng ◽  
J.. Burghardt ◽  
J.E.. E. Brown
Keyword(s):  
Pressure Drop ◽  
Field Experiments ◽  
Horizontal Wells ◽  
Fracture Plane ◽  
Hydraulic Fractures ◽  
Multiple Fractures ◽  
Fracture Geometry ◽  
Complex Fracture ◽  
Limited Entry ◽  
The Impact

Abstract There is accepted evidence that multistage fracturing of horizontal wells in shale reservoirs results in significant production variation from perforation cluster to perforation cluster. Typically, between 30 and 40% of the clusters do not significantly contribute to production while the majority of the production comes from only 20 to 30% of the clusters. Based on numerical modeling, laboratory and field experiments, we investigate the process of simultaneously initiating and propagating several hydraulic fractures. In particular, we clarify the interplay between the impact of perforation friction and stress shadow on the stability of the propagation of multiple fractures. We show that a sufficiently large perforation pressure drop (limited entry) can counteract the stress interference between different growing fractures. We also discuss the robustness of the current design practices (cluster location, limited entry) in the presence of characterized stress heterogeneities. Laboratory experiments highlight the complexity of the fracture geometry in the near-wellbore region. Such complex fracture path results from local stress perturbations around the well and the perforations, as well as the rock fabric. The fracture complexity (i.e., the merging of multiple fractures and the reorientation towards the preferred far-field fracture plane) induces a strong nonlinear pressure drop on a scale of a few meters. Single entry field experiments in horizontal wells show that this near-wellbore effect is larger in magnitude than perforation friction and is highly variable between clusters, without being predictable. Through a combination of field measurements and modeling, we show that such variability results in a very heterogeneous slurry rate distribution; and therefore, proppant intake between clusters during a stage, even in the presence of limited entry techniques. We also note that the estimated distribution of proppant intake between clusters appears similar to published production log data. We conclude that understanding and accounting for the complex fracture geometry in the near-wellbore is an important missing link to better engineer horizontal well multistage completions.

Simultaneous Multifracture Treatments: Fully Coupled Fluid Flow and Fracture Mechanics for Horizontal Wells

SPE Journal ◽  
2014 ◽  
Vol 20 (02) ◽  
pp. 337-346 ◽  
Author(s):  
Kan Wu ◽  
Jon E. Olson
Keyword(s):  
Fluid Flow ◽  
Fracture Propagation ◽  
Horizontal Wells ◽  
Gas Production ◽  
Propagation Model ◽  
Displacement Discontinuity ◽  
Hydraulic Fractures ◽  
Multiple Fractures ◽  
Frictional Pressure Drop ◽  
Horizontal Wellbore

Summary Successfully creating multiple hydraulic fractures in horizontal wells is critical for unconventional gas production economically. Optimizing the stimulation of these wells will require models that can account for the simultaneous propagation of multiple, potentially nonplanar, fractures. In this paper, a novel fracture-propagation model (FPM) is described that can simulate multiple-hydraulic-fracture propagation from a horizontal wellbore. The model couples fracture deformation with fluid flow in the fractures and the horizontal wellbore. The displacement discontinuity method (DDM) is used to represent the mechanics of the fractures and their opening, including interaction effects between closely spaced fractures. Fluid flow in the fractures is determined by the lubrication theory. Frictional pressure drop in the wellbore and perforation zones is taken into account by applying Kirchoff's first and second laws. The fluid-flow rates and pressure compatibility are maintained between the wellbore and the multiple fractures with Newton's numerical method. The model generates physically realistic multiple-fracture geometries and nonplanar-fracture trajectories that are consistent with physical-laboratory results and inferences drawn from microseismic diagnostic interpretations. One can use the simulation results of the FPM for sensitivity analysis of in-situ and fracture treatment parameters for shale-gas stimulation design. They provide a physics-based complex fracture network that one can import into reservoir-simulation models for production analysis. Furthermore, the results from the model can highlight conditions under which restricted width occurs that could lead to proppant screenout.

Influence of Finite Hydraulic-Fracture Conductivity on Unconventional Hydrocarbon Recovery With Horizontal Wells

SPE Journal ◽  
2017 ◽  
Vol 22 (06) ◽  
pp. 1790-1807 ◽  
Author(s):  
Deming Mao ◽  
David S. Miller ◽  
John M. Karanikas ◽  
Ed A. Lake ◽  
Phillip S. Fair ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
Normal Derivative ◽  
Unconventional Reservoirs ◽  
Analytical Models ◽  
Hydraulic Fractures ◽  
Multiple Fractures ◽  
Hydraulic Stimulation ◽  
Fracture Conductivity ◽  
Hydrocarbon Recovery

Summary The classic plots of dimensionless fracture conductivity (CfD) vs. equivalent wellbore radius or equivalent negative skin are useful for evaluating the performance of hydraulic fractures (HFs) in vertical wells targeting conventional reservoirs (Prats 1961; Cinco-Ley and Samaniego-V. 1981). The increase in well productivity after hydraulic stimulation can be estimated from the “after fracturing” effective wellbore radius or from the “after fracturing” equivalent negative skin. However, this earlier work does not apply to the case of horizontal wells with multiple fractures. A revision of the diagnostic plots is needed to account for the combination of the resulting radial-flow regime and the transient effect in unconventional reservoirs with ultralow permeability. This paper reviews and extends this earlier work with the objective of making it applicable in the case of horizontal wells with multiple fractures. It also demonstrates practical application of this new technique for fracture-design optimization for horizontal wells. The influence of finite fracture conductivity (FC) on the HF flow efficiency is evaluated through analytical models, and it is confirmed by a 3D transient numerical-reservoir simulation. This work demonstrates that a redefined dimensionless fracture conductivity for horizontal wells CfD,h = 4 is found to be optimal by use of the maximum of log-normal derivative (subject to economics) for HFs in horizontal wells, and this value of CfD,h can provide 50% of the fracture-flow efficiency and 90% of the estimated ultimate recovery (EUR) that would have been obtained from an infinitely conductive fracture for the same production period. This new master plot can provide guidance for hydraulic-fracturing design and its optimization for hydrocarbon recovery in unconventional reservoirs through hydraulic fracturing in horizontal wells.

Complex Approach to Green Fields Development and Fracturing Strategy by the Example of Pilot on the Field by Name of Alexandra Zhagrina

2021 ◽  
Author(s):  
Evgeny Gennadievich Kazakov ◽  
Ruslan Ramilevich Gaynetdinov ◽  
Artem Vladimirovich Churakov ◽  
Ildar Shamilevich Basyrov ◽  
Anna Vladimirovna Galysheva ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Oil Production ◽  
Horizontal Wells ◽  
Active Phase ◽  
Hydraulic Fractures ◽  
Fracture Geometry ◽  
3D Geomechanical Model ◽  
Minimum Number ◽  
Clay Layers ◽  
Water Saturated

Abstract The article describes an approach to creating, in conditions of limited input information, a strategy for performing the first hydraulic fracturing operations on deviated and horizontal wells in the A. Zhagrin field. The field is in the active phase of exploration, the planned count is mainly composed of horizontal wells with multi-stage hydraulic fracturing. Approaches to the design of pilot works with control of the height of hydraulic fractures, which have proved their effectiveness by well logging studies and the obtained oil productivity, they have been successfully introduced into the technology of multistage hydraulic fracturing in horizontal wells. Due to the minimum number of reference wells, a significant area of the field (100 km2), the uncertainty of the distribution of water-saturated zones in the target and adjacent formations, the spread in the thickness of clay layers from 10 to 30 m, there is a risk of unwanted introduction of these interlayers by hydraulic fractures. The project team was able to assess the risks in terms of hydraulic fracturing, depending on the geological and physical characteristics (thickness of the target formation and clay layers, saturation) and in joint cross-functional work (with geological, geomechanical and hydrodynamic support) to implement hydraulic fracturing technologies that have confirmed their efficiency in oil production. To test hypotheses at the initial stage, various scenario conditions with a probabilistic assessment of uncertainties were selected at the deviated wells, as a result, the matrix of technological solutions was developed. In directional wells, the capabilities of technologies selected for pilot testing were confirmed using methods for diagnosing the height of hydraulic fracturing. The performed correction of stress profiles in a modern corporate hydraulic fracturing simulator increased the correctness of the 3D geomechanical model, which made it possible to optimize fracture geometry and horizontal wellbore drilling direction. Due to a thorough study of the conditions for the applicability of the considered hydraulic fracturing technologies, it was excluded the inclusion of water-saturated horizons without losing the effective half-length of hydraulic fractures. The workflow, during the implementation of which a matrix of solutions for successful well development was created, will ensure the achievement of planned oil production rates in the future for a field without rich field practice in hydraulic fracturing.

Advanced Well Completion Strategies to Improve Gas Production Deliverability in Marginal Tight Gas Reservoirs from an Onshore Abu Dhabi Gas Field

2021 ◽  
Author(s):  
Hajar Ali Abdulla Al Shehhi ◽  
Bondan Bernadi ◽  
Alia Belal Zuwaid Belal Al Shamsi ◽  
Shamma Jasem Al Hammadi ◽  
Fatima Omar Alawadhi ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Wells ◽  
Gas Production ◽  
Abu Dhabi ◽  
Tight Gas ◽  
Production Rates ◽  
Well Productivity ◽  
Gas Saturation ◽  
Well Design ◽  
The Impact

Abstract Reservoir X is a marginal tight gas condensate reservoir located in Abu Dhabi with permeability of less than 0.05 mD. The field was conventionally developed with a few single horizontal wells, though sharp production decline was observed due to rapid pressure depletion. This study investigates the impact of converting the existing single horizontal wells into single long horizontal, dual laterals, triple laterals, fishbone design and hydraulic fracturing in improving well productivity. The existing wells design modifications were planned using a near reservoir simulator. The study evaluated the impact of length, trajectory, number of laterals and perforation intervals. For Single, dual, and triple lateral wells, additional simulation study with hydraulic fracturing was carried out. To evaluate and obtain effective comparisons, sector models with LGR was built to improve the simulation accuracy in areas near the wellbore. The study conducted a detailed investigation into the impact of various well designs on the well productivity. It was observed that maximizing the reservoir contact and targeting areas with high gas saturation led to significant increase in the well productivity. The simulation results revealed that longer laterals led to higher gas production rates. Dual lateral wells showed improved productivity when compared to single lateral wells. This incremental gain in the production was attributed to increased contact with the reservoir. The triple lateral well design yielded higher productivity compared to single and dual lateral wells. Hydraulic fracturing for single, dual, and triple lateral wells showed significant improvement in the gas production rates and reduced condensate banking near the wellbore. A detailed investigation into the fishbone design was carried out, this involved running sensitivity runs by varying the number of branches. Fishbone design showed considerable increment in production when compared to other well designs This paper demonstrates that increasing the reservoir contact and targeting specific areas of the reservoir with high gas saturation can lead to significant increase in the well productivity. The study also reveals that having longer and multiple laterals in the well leads to higher production rates. Hydraulic fracturing led to higher production gains. Fishbone well design with its multiple branches showed the most production again when compared to other well designs.

Simultaneous Hydraulic Fracturing Improves Completion Efficiency and Lowers Costs Per Foot

2021 ◽  
Author(s):  
David Russell ◽  
Price Stark ◽  
Sean Owens ◽  
Awais Navaiz ◽  
Russell Lockman
Keyword(s):  
Hydraulic Fracturing ◽  
Oil And Gas ◽  
Horizontal Wells ◽  
Asset Returns ◽  
Gas Production ◽  
Well Performance ◽  
Additional Time ◽  
Oil And Gas Production ◽  
Single Well ◽  
Lateral Length

Abstract Reducing well costs in unconventional development while maintaining or improving production continues to be important to the success of operators. Generally, the primary drivers for oil and gas production are treatment fluid volume, proppant mass, and the number of stages or intervals along the well. Increasing these variables typically results in increased costs, causing additional time and complexity to complete these larger designs. Simultaneously completing two wells using the same volumes, rates, and number of stages as for any previous single well, allows for more lateral length or volume completed per day. This paper presents the necessary developments and outcomes of a completion technique utilizing a single hydraulic fracturing spread to simultaneously stimulate two or more horizontal wells. The goal of this technique is to increase operational efficiency, lower completion cost, and reduce the time from permitting a well to production of that well—without negatively impacting the primary drivers of well performance. To date this technique has been successfully performed in both the Bakken and Permian basins in more than 200 wells, proving its success can translate to other unconventional fields and operations. Ultimately, over 200 wells were successfully completed simultaneously, resulting in a 45% increase in completion speed and significant decrease in completion costs, while still maintaining equivalent well performance. This type of simultaneous completion scenario continues to be implemented and improved upon to improve asset returns.

scholarly journals Fracturing curve and its corresponding gas productivity of coalbed methane wells in the Zhengzhuang block, southern Qinshui Basin, North China

2020 ◽  
Vol 38 (5) ◽  
pp. 1387-1408
Author(s):  
Yang Chen ◽  
Dameng Liu ◽  
Yidong Cai ◽  
Jingjie Yao
Keyword(s):  
Hydraulic Fracturing ◽  
Coalbed Methane ◽  
Continuous Production ◽  
Fracture Morphology ◽  
Geological Structure ◽  
In Situ Stress ◽  
Gas Production ◽  
Type Curves ◽  
Stable Type

Hydraulic fracturing has been widely used in low permeability coalbed methane reservoirs to enhance gas production. To better evaluate the hydraulic fracturing curve and its effect on gas productivity, geological and engineering data of 265 development coalbed methane wells and 14 appraisal coalbed methane wells in the Zhengzhuang block were investigated. Based on the regional geologic research and statistical analysis, the microseismic monitoring results, in-situ stress parameters, and gas productivity were synthetically evaluated. The results show that hydraulic fracturing curves can be divided into four types (descending type, stable type, wavy type, and ascending type) according to the fracturing pressure and fracture morphology, and the distributions of different type curves have direct relationship with geological structure. The vertical in-situ stress is greater than the closure stress in the Zhengzhuang block, but there is anomaly in the aggregation areas of the wavy and ascending fracturing curves, which is the main reason for the development of multi-directional propagated fractures. The fracture azimuth is consistent with the regional maximum principle in-situ stress direction (NE–NEE direction). Furthermore, the 265 fracturing curves indicate that the coalbed methane wells owned descending, and stable-type fracturing curves possibly have better fracturing effect considering the propagation pressure gradient (FP) and instantaneous shut-in pressure (PISI). Two fracturing-productivity patterns are summarized according to 61 continuous production wells with different fracturing type and their plane distribution, which indicates that the fracturing effect of different fracturing curve follows the pattern: descending type > stable type > wavy type > ascending type.

Optimization of In-Stage Diversion To Promote Uniform Planar Multifracture Propagation: A Numerical Study

SPE Journal ◽  
2020 ◽  
Vol 25 (06) ◽  
pp. 3091-3110
Author(s):  
Ming Chen ◽  
Shicheng Zhang ◽  
Tong Zhou ◽  
Xinfang Ma ◽  
Yushi Zou
Keyword(s):  
Numerical Study ◽  
High Stress ◽  
In Situ Stress ◽  
Stress Difference ◽  
Multiple Fractures ◽  
Stress Shadow ◽  
Limited Entry ◽  
Fully Coupled ◽  
Flux Redistribution

Summary Creating uniform multiple fractures is a challenging task due to reservoir heterogeneity and stress shadow. Limited-entry perforation and in-stage diversion are commonly used to improve multifracture treatments. Many studies have investigated the mechanism of limited-entry perforation for multifracture treatments, but relatively few have focused on the in-stage diversion process. The design of in-stage diversion is usually through trial and error because of the lack of a simulator. In this study, we present a fully coupled planar 2D multifracture model for simulating the in-stage diversion process. The objective is to evaluate flux redistribution after diversion and optimize the dosage of diverters and diversion timing under different in-stage in-situ stress difference. Our model considers ball sealer allocation and solves flux redistribution after diversion through a fully coupled multifracture model. A supertimestepping explicit algorithm is adopted to solve the solid/fluid coupling equations efficiently. Multifracture fronts are captured by using tip asymptotes and an adaptive time-marching approach. The modeling results are validated against analytical solutions for a plane-strain Khristianovic-Geertsma de Klerk (KGD) model. A series of numerical simulations are conducted to investigate the multifracture growth under different in-stage diversion operations. Parametric studies reveal that the in-stage in-situ stress difference is a critical parameter for diversion designs. When the in-situ stress difference is larger than 2 MPa, the fracture in the high-stress zone can hardly be initiated before diversion for a general fracturing design. More ball sealers are required for the formations with higher in-stage in-situ stress difference. The diverting time should be earlier for formations with high in-stage stress differences as well. Adding more perforation holes in the zone with higher in-situ stress is recommended to achieve even flux distribution. The results of this study can help understand the multifracture growth mechanism during in-stage diversion and optimize the diversion design timely.

Geologic Controls on Gas Production and Hydraulic-Fracturing Flowback in Tight Gas Sandstones of the Late Jurassic Monteith Formation, Deep Basin, Alberta, Canada

2016 ◽  
Vol 19 (01) ◽  
pp. 024-040 ◽  
Author(s):  
Liliana Zambrano ◽  
Per K. Pedersen ◽  
Roberto Aguilera
Keyword(s):  
Hydraulic Fracturing ◽  
Gas Production ◽  
Production Performance ◽  
Rock Properties ◽  
Hydraulic Fractures ◽  
Tight Gas ◽  
Deep Basin ◽  
Rock Types ◽  
Sandstone Reservoirs ◽  
Geologic Controls

Summary A comparison of rock properties integrated with production performance and hydraulic-fracturing flowback (FB) of the uppermost lithostratigraphic “Monteith A” and the lowermost portion “Monteith C” of the Monteith Formation in the Western Canada Sedimentary Basin (WCSB) in Alberta is carried out with the use of existing producing gas wells. The analyses are targeted to understand the major geologic controls that differentiate the two tight gas sandstone reservoirs. This study consists of basic analytical tools available for geological characterization of tight gas reservoirs that is based on the identification and comparison of different rock types such as depositional, petrographic, and hydraulic for each lithostratigraphic unit of the Monteith Formation. As these low-matrix-permeability sandstone reservoirs were subjected to intense post-depositional diagenesis, a comparison of the various rock types allows the generation of more-accurate reservoir description, and a better understanding of the key geologic characteristics that control gas-production potential and possible impact on hydraulic-fracturing FB. Well performance and FB were the focus of many previous simulation and geochemical studies. In contrast, we find that an adequate understanding of the rocks hosting hydraulic fractures is a necessary complement to those studies for estimating FB times. This understanding was lacking in some previous studies. As a result, a new method is proposed on the basis of a crossplot of cumulative gas production vs. square root of time for estimating FB time. It is concluded that the “Monteith A” unit has better rock quality than the “Monteith C” unit because of less-heterogeneous reservoir geometry, less-complex mineralogical composition, and larger pore-throat apertures.

Some Effects of Stress, Friction, and Fluid Flow on Hydraulic Fracturing

1982 ◽  
Vol 22 (03) ◽  
pp. 321-332 ◽  
Author(s):  
M.E. Hanson ◽  
G.D. Anderson ◽  
R.J. Shaffer ◽  
L.D. Thorson
Keyword(s):  
Fluid Flow ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Research Program ◽  
In Situ Stress ◽  
Material Interfaces ◽  
Fracture Geometry ◽  
Funded Research ◽  
Fracturing Process

Abstract We are conducting a U.S. DOE-funded research program aimed at understanding the hydraulic fracturing process, especially those phenomena and parameters that strongly affect or control fracture geometry. Our theoretical and experimental studies consistently confirm the well-known fact that in-situ stress has a primary effect on fracture geometry, and that fractures propagate perpendicular to the least principal stress. In addition, we find that frictional interfaces in reservoirs can affect fracturing. We also have quantified some effects on fracture geometry caused by frictional slippage along interfaces. We found that variation of friction along an interface can result in abrupt steps in the fracture path. These effects have been seen in the mineback of emplaced fractures and are demonstrated both theoretically and in the laboratory. Further experiments and calculations indicate possible control of fracture height by vertical change in horizontal stresses. Preliminary results from an analysis of fluid flow in small apertures are discussed also. Introduction Hydraulic fracturing and massive hydraulic fracturing (MHF) are the primary candidates for stimulating production from tight gas reservoirs. MHF can provide large drainage surfaces to produce gas from the low- permeability formation if the fracture surfaces remain in the productive parts of the reservoir. To determine whether it is possibleto contain these fractures in the productive formations andto design the treatment to accomplish this requires a much broader knowledge of the hydraulic fracturing process. Identification of the parameters controlling fracture geometry and the application of this information in designing and performing the hydraulic stimulation treatment is a principal technical problem. Additionally, current measurement technology may not be adequate to provide the required data. and new techniques may have to be devised. Lawrence Livermore Natl. Laboratory has been conducting a DOE-funded research program whose ultimate goal is to develop models that predict created hydraulic fracture geometry within the reservoir. Our approach has been to analyze the phenomenology of the fracturing process to son out and identify those parameters influencing hydraulic fracture geometry. Subsequent model development will incorporate this information. Current theoretical and stimulation design models are based primarily on conservation of mass and provide little insight into the fracturing process. Fracture geometry is implied in the application of these models. Additionally, pressure and flow initiation in the fractures and their interjection with the fracturing process is not predicted adequately with these models. We have reported previously on some rock-mechanics aspects of the fracturing process. For example, we have studied, theoretically and experimentally, pressurized fracture propagation in the neighborhood of material interfaces. Results of interface studies showed that natural fractures in the interfacial region negate any barrier effect when the fracture is propagating from a lower modulus material toward a higher modulus material. On the other hand, some fracture containment could occur when the fracture is propagating from a higher modulus into a lower modulus material. Effect of moduli changes on the in-situ stress field have to be taken into consideration to evaluate fracture containment by material interfaces. Some preliminary analyses have been performed to evaluate how stress changes when material properties change, but we have not evaluated this problem fully. SPEJ P. 321^

Sign in / Sign up

Export Citation Format

Share Document