scholarly journals Strength Characteristics and Slope Stability of Expansive Soil from Pingdingshan, China

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Ju-yun Zhai ◽  
Xiang-yong Cai
Keyword(s):  
Shear Strength ◽  
Slope Stability ◽  
Expansive Soil ◽  
Friction Angle ◽  
Natural Soil ◽  
Soil Slope ◽  
The Finite Element Method ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
The Stability

By analyzing the characteristics of expansive soil from Pingdingshan, China, the shear strength parameters at different water contents, dry densities, and dry-wet cycles of expansive soil are obtained. It is found that, at higher soil-water content, the internal friction angle is 0° and the shallow layer of expansive soil slope will collapse and destroy; this has nothing to do with the height of the slope and the size of the slope. The parameters of soil influenced by atmosphere are the ones which have gone through dry-wet cycles, and the parameters of soil without atmospheric influence are the same as those of natural soil. In the analysis of slope stability, the shear strength parameters of soil can be determined by using the finite element method, and the stability coefficient of the expansive soil slope can be calculated.

Potential Slip Surfaces of Slope with Strength Parameters

2011 ◽  
Vol 243-249 ◽  
pp. 3315-3318 ◽  
Author(s):  
Hang Lin ◽  
Ping Cao
Keyword(s):  
Shear Strength ◽  
Numerical Analysis ◽  
Factor Of Safety ◽  
Slip Surface ◽  
Friction Angle ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Slip Surfaces ◽  
Stability Of Slope ◽  
The Stability

The cohesion c and friction angle φ are the main strength parameters influencing the stability of slope. Any of them changes, the factor of safety of slope will change, but it has seldom been considered in the literature how the potential slip surface will change at the same time. In the present paper, the analytical deduction and numerical analysis are done to find out the effect of shear strength parameters c and φ to the distribution of potential slip surface. The study shows that, the potential slip surface is affected by the combination of c and φ, whose function is λ=c/(γhtanφ).

scholarly journals Impact of shear strength parameters on slope stability

2020 ◽  
Vol 310 ◽  
pp. 00040
Author(s):  
Slávka Harabinová ◽  
Eva Panulinová
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Slope Stability ◽  
Factor Of Safety ◽  
Slip Surface ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Fine Grained

Analysis and assessment of the slopes stability are an important in geotechnical engineering for all the times. The paper deals with the assessment of slope stability in fine-grained soils. The influence of change in shear strength parameters on the factor of safety has been studied. The factor of safety can be correctly obtained only if the critical failure surface of the slope is accurately identified and shear strength parameters are correctly. To investigate effect of soil strength parameters on the factor of safety, different values of shear strength parameters: cohesion (c), internal friction angle (ϕ), were chosen. The calculation and assessment of slope stability was made using methods which assume a circular shape of the slip surface (Bishop and Petterson method) and methods that consider the polygonal shape of the slip surface (Spencer and Janbu method). We analyzed the impact of shear strength parameters of the resulting factor of slope stability of fine grained soil. The results of the study showed that the factor of safety of the slope changes with varying cohesion c and internal friction angle ϕ.

scholarly journals Influence of vetiver root on strength of expansive soil-experimental study

PLoS ONE ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. e0244818
Author(s):  
Gui-yao Wang ◽  
Yong-gang Huang ◽  
Run-fa Li ◽  
Jing-mei Chang ◽  
Jin-liang Fu
Keyword(s):  
Shear Strength ◽  
Internal Friction ◽  
Root System ◽  
Shear Test ◽  
Expansive Soil ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Strength Parameter ◽  
Shear Strength Parameters ◽  
Strength Parameters

Grassroots have received more attention than the traditional method as soil reinforcement materials, especially the use of vetiver and other vegetation protection methods to treat expansive soil slope, have been tried and applied. To study the influence of grassroots on the strength properties of expansive soil, the laws of vetiver root growth over time and its vertical distribution of root content(δ) were firstly investigated by the experiment of planting vetiver. Then different δ and depth of planted soil were obtained. Simultaneously different δ and water content(ω) of grafted soil were made. With the direct shear test, the shear strength parameters of root-soil with different δ were analyzed. The shear test on root-soil composites with different δ was carried out to compare the strength characteristics of planted and grafted soil. The results showed that the δ of vetiver decreased with the increase of depth, and the δ of each layer increased with the growth period. The δ of 180d was 70.5% higher than that of 90d. The cohesion(c) of root-soil can be increased by more than 97%, and internal friction angle(φ) can be increased by more than 15.4% after 180 days. The c of 90 d vetiver root system can be increased by more than 18%, and the φ can be increased by more than 1.5%. At each depth, the c and φ of composite soil increases with the increase of δ, and the increment of cohesion (Δc) and the increment of internal friction angle (Δφ) increase with the increment of δ. But the increase in the ω will weaken the shear strength parameters of root-soil. Under the condition of the planted root system and grafted root system, the influence degree of δ on strength parameter of root-soil is different, and the law of strength parameters versus δ of grafted soil of 365d is similar to that of planted soil of 90d. And the root reinforcement of grafted soil is weaker than planted soil. Hence the grafted soil can´t accurately reflect the root-soil interaction of the existing root system.

Slope Stability Analysis under the Condition of Seepage

2012 ◽  
Vol 204-208 ◽  
pp. 241-245
Author(s):  
Yang Jin
Keyword(s):  
Finite Element Method ◽  
Shear Strength ◽  
Slope Stability ◽  
Negative Impact ◽  
Strength Reduction ◽  
Soil Slope ◽  
Failure State ◽  
Calculation Results ◽  
The Stability ◽  
Shear Strength Reduction

The stability of soil slope under seepage is calculated and analyzed by using finite element method based on the technique of shear strength reduction. When the condition of seepage or not is considered respectively, the critical failure state of slopes and corresponding safety coefficients can be determined by the numerical analysis and calculation. Besides, through analyzing and comparing the calculation results, it shows that seepage has a negative impact on slope stability.

Study on the Granular Shear Strength Parameters of Dumping Site

2012 ◽  
Vol 256-259 ◽  
pp. 358-361
Author(s):  
Xiang Yun Kong ◽  
Guang Jin Wang ◽  
Xiao Chao Zhou
Keyword(s):  
Particle Size ◽  
Grain Size ◽  
Shear Strength ◽  
Internal Friction ◽  
Friction Angle ◽  
Internal Friction Angle ◽  
Shear Strength Parameters ◽  
Strength Parameters ◽  
Dumping Site ◽  
Size Grading

Apparent particle size grading is the important characteristic of super-high bench dumping site, and the critical factors with the impact of its stability and disaster prevention are the fragmentation distribution and shear strength parameters of granular. With the copper mine dumping site which had the feature of apparent particle size grading, the thesis carried out the study of on-site particle size investigation and indoor laboratory. The particle-size distribution law with the changing of dumping-site height was analyzed and quantitative relationship between the fragmentation distribution and shear strength parameters of granular was discussed. The research results indicated that coarse-grain contents and maximum grain size were increased significantly according to the decreasing of dumping-site height, which showed that the dumping-site had the feature of apparent particle size grading. The coarse particle content in the grain size composition and internal friction angle φ of shear strength parameters increased with the obvious increment of the distribution value B. The relationship between distribution value B and the internal friction angle φ could be expressed by exponential function curve.

Sign in / Sign up

Export Citation Format

Share Document