scholarly journals Performance of Partial and Cavity Type Squealer Tip of a HP Turbine Blade in a Linear Cascade

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Levent Kavurmacioglu ◽  
Hidir Maral ◽  
Cem Berk Senel ◽  
Cengiz Camci
Keyword(s):  
Turbine Blade ◽  
Flow Structure ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Axial Flow ◽  
Numerical Calculations ◽  
Complex Flow ◽  
Parametric Generation ◽  
Linear Cascade ◽  
Blade Tip

Three-dimensional highly complex flow structure in tip gap between blade tip and casing leads to inefficient turbine performance due to aerothermal loss. Interaction between leakage vortex and secondary flow structures is the substantial source of that loss. Different types of squealer tip geometries were tried in the past, in order to improve turbine efficiency. The current research deals with comparison of partial and cavity type squealer tip concepts for higher aerothermal performance. Effects of squealer tip have been examined comprehensively for an unshrouded HP turbine blade tip geometry in a linear cascade. In the present paper, flow structure through the tip gap was comprehensively investigated by computational fluid dynamic (CFD) methods. Numerical calculations were obtained by solving three-dimensional, incompressible, steady, and turbulent form of the Reynolds-averaged Navier-Stokes (RANS) equations using a general purpose and three-dimensional viscous flow solver. The two-equation turbulence model, shear stress transport (SST), has been used. The tip profile belonging to the Pennsylvania State University Axial Flow Turbine Research Facility (AFTRF) was used to create an extruded solid model of the axial turbine blade. For identifying optimal dimensions of squealer rim in terms of squealer height and squealer width, our previous studies about aerothermal investigation of cavity type squealer tip were utilized. In order to obtain the mesh, an effective parametric generation has been utilized using a multizone structured mesh. Numerical calculations indicate that partial and cavity squealer designs can be effective to reduce the aerodynamic loss and heat transfer to the blade tip. Future efforts will include novel squealer shapes for higher aerothermal performance.

scholarly journals Computational Fluid Dynamic Analysis of a Vibrating Turbine Blade

2012 ◽  
Vol 2012 ◽  
pp. 1-15 ◽  
Author(s):  
Osama N. Alshroof ◽  
Gareth L. Forbes ◽  
Nader Sawalhi ◽  
Robert B. Randall ◽  
Guan H. Yeoh
Keyword(s):  
Gas Turbine ◽  
Turbine Blade ◽  
Moving Boundary ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Commercial Software ◽  
Computational Fluid Dynamic Analysis ◽  
Current State ◽  
Blade Tip ◽  
The One

This study presents the numerical fluid-structure interaction (FSI) modelling of a vibrating turbine blade using the commercial software ANSYS-12.1. The study has two major aims: (i) discussion of the current state of the art of modelling FSI in gas turbine engines and (ii) development of a “tuned” one-way FSI model of a vibrating turbine blade to investigate the correlation between the pressure at the turbine casing surface and the vibrating blade motion. Firstly, the feasibility of the complete FSI coupled two-way, three-dimensional modelling of a turbine blade undergoing vibration using current commercial software is discussed. Various modelling simplifications, which reduce the full coupling between the fluid and structural domains, are then presented. The one-way FSI model of the vibrating turbine blade is introduced, which has the computational efficiency of a moving boundary CFD model. This one-way FSI model includes the corrected motion of the vibrating turbine blade under given engine flow conditions. This one-way FSI model is used to interrogate the pressure around a vibrating gas turbine blade. The results obtained show that the pressure distribution at the casing surface does not differ significantly, in its general form, from the pressure at the vibrating rotor blade tip.

The inlet flow structure of a conceptual open-nose supersonic drone

2021 ◽  
pp. 095441002098304
Author(s):  
Eiman B Saheby ◽  
Xing Shen ◽  
Anthony P Hays ◽  
Zhang Jun
Keyword(s):  
Flow Structure ◽  
Stokes Equations ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Computational Fluid Dynamic Simulation ◽  
Navier Stokes ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Aerodynamic Efficiency ◽  
Performance Effects

This study describes the aerodynamic efficiency of a forebody–inlet configuration and computational investigation of a drone system, capable of sustainable supersonic cruising at Mach 1.60. Because the whole drone configuration is formed around the induction system and the design is highly interrelated to the flow structure of forebody and inlet efficiency, analysis of this section and understanding its flow pattern is necessary before any progress in design phases. The compression surface is designed analytically using oblique shock patterns, which results in a low drag forebody. To study the concept, two inlet–forebody geometries are considered for Computational Fluid Dynamic simulation using ANSYS Fluent code. The supersonic and subsonic performance, effects of angle of attack, sideslip, and duct geometries on the propulsive efficiency of the concept are studied by solving the three-dimensional Navier–Stokes equations in structured cell domains. Comparing the results with the available data from other sources indicates that the aerodynamic efficiency of the concept is acceptable at supersonic and transonic regimes.

Flow Field Analysis of Under-Expanded Supersonic Jets Impinging on an Inclined Flat Plate: Analysis With PSP/Schlieren Images and CFD Simulations

2005 ◽  
Author(s):  
Kozo Fujii ◽  
Akira Oyama ◽  
Nobuyuki Tsuboi ◽  
Moto Tsukada ◽  
Hirofumi Ouchi ◽  
...  
Keyword(s):  
Flat Plate ◽  
Flow Structure ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Flow Fields ◽  
Field Analysis ◽  
Geometrical Parameters ◽  
Complex Flow ◽  
Plate Analysis ◽  
Complex Flow Structure

Flow fields of Mach number 2.2 jet impinging on an inclined flat plate are experimentally investigated using the Pressure Sensitive Paints (PSP) and Schlieren flow visualization. The flow filed structure is mainly determined by two geometrical parameters (nozzle-plate distance and plate angle against the jet) and one flow parameter (pressure ratio). The results suggest that all the observed flow fields can actually be classified into three types of flow structure based on the three parameters above. As an extension of the authors’ earlier work, experiments are carried out for higher plate angles. The new results show the effectiveness and limitation of the classification that we proposed. To find out the flow structure, some of the flow fields are computationally simulated. Good agreement of the pressure distributions with the experiment validates the simulation. Although analysis so far is limited, the result reveals three dimensional complex flow structure that created pressure peaks over the plate surface.

An Experimental Investigation of the Flow Through an Axial-Flow Pump

1995 ◽  
Vol 117 (3) ◽  
pp. 485-490 ◽  
Author(s):  
W. C. Zierke ◽  
W. A. Straka ◽  
P. D. Taylor
Keyword(s):  
Large Scale ◽  
Three Dimensional ◽  
Axial Flow ◽  
Fast Response ◽  
Complex Flow ◽  
Penn State ◽  
Response Pressure ◽  
Axial Flow Pump ◽  
Scale Experiment ◽  
High Reynolds

The high Reynolds number pump (HIREP) facility at ARL Penn State has been used to perform a low-speed, large-scale experiment of the incompressible flow of water through a two-blade-row turbomachine. The objectives of this experiment were to provide a database for comparison with three-dimensional, turbulent flow computations, to evaluate engineering models, and to improve our physical understanding of many of the phenomena involved in this complex flow field. This summary paper briefly describes the experimental facility, as well as the experimental techniques—such as flow visualization, static-pressure measurements, laser Doppler velocimetry, and both slow- and fast-response pressure probes. Then, proceeding from the inlet to the exit of the pump, the paper presents highlights of experimental measurements and data analysis, giving examples of measured physical phenomena such as endwall boundary layers, separation regions, wakes, and secondary vortical structures. In conclusion, this paper provides a synopsis of a well-controlled, larger scope experiment that should prove helpful to those who wish to use the database.

Experimental and Numerical Investigation of Stator Exit Flow Field of an Automotive Torque Converter

1996 ◽  
Vol 118 (4) ◽  
pp. 835-843 ◽  
Author(s):  
B. V. Marathe ◽  
B. Lakshminarayana ◽  
Y. Dong
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Numerical Investigation ◽  
Three Dimensional ◽  
Axial Flow ◽  
Torque Converter ◽  
Operating Conditions ◽  
Navier Stokes ◽  
Complex Flow ◽  
Rate Of Decay

The objective of this investigation is to understand the nature of the complex flow field inside each element of the torque converter through a systematic experimental and numerical investigation of the flow field. A miniature five-hole probe was used to acquire the data at the exit of the stator at several operating conditions. The flow field is found to be highly three dimensional with substantial flow deviations, and secondary flow at the exit of the stator. The secondary flow structure, caused by the upstream radial variation of the through flow, induces flow overturning near the core. Flow separation near the shell causes flow underturning in this region. The rate of decay of stator wake is found to be slower than that observed in the wakes of axial flow turbine nozzles. The flow predictions by a Navier–Stokes code are in good agreement with the pressure and the flow field measured at the exit of the stator at the design and the off-design conditions.

Design of a rotor blade tip for the investigation of dynamic stall in the transonic wind-tunnel Göttingen

2016 ◽  
Vol 120 (1232) ◽  
pp. 1509-1533 ◽  
Author(s):  
B. Lütke ◽  
J. Nuhn ◽  
Y. Govers ◽  
M. Schmidt
Keyword(s):  
Experimental Data ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Numerical Data ◽  
Dynamic Stall ◽  
Navier Stokes ◽  
Fe Model ◽  
Stress Distributions ◽  
Cfd Simulations ◽  
Blade Tip

ABSTRACTThe aerodynamic and structural design of a pitching blade tip with a double-swept planform is presented. The authors demonstrate how high-fidelity finite element (FE) and computational fluid dynamic (CFD) simulations are successfully used in the design phase. Eigenfrequencies, deformation, and stress distributions are evaluated by means of a three-dimensional (3D) FE model. Unsteady Reynolds-averaged Navier-Stokes (RANS) simulations are compared to experimental data for a light dynamic stall case atMa= 0.5,Re= 1.2 × 106. The results show a very good agreement as long as the flow stays attached. Tendencies for the span-wise location of separation are captured. As soon as separation sets in, discrepancies between experimental and numerical data are observed. The experimental data show that for light dynamic stall cases atMa= 0.5, a factor of safety ofFoS= 2.0 is sufficient if the presented simulation methods are used.

Three-Dimensional Flow Phenomena in a Transonic, High-Through-Flow, Axial-Flow Compressor Stage

1992 ◽  
Author(s):  
William W. Copenhaver ◽  
Chunill Hah ◽  
Steven L. Puterbaugh
Keyword(s):  
Flow Field ◽  
Viscous Flow ◽  
Numerical Technique ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Axial Flow ◽  
Compressor Stage ◽  
Complex Flow ◽  
Pressure Transducers ◽  
Through Flow

A detailed aerodynamic study of a transonic, high-through-flow, single stage compressor is presented. The compressor stage was comprised of a low-aspect-ratio rotor combined alternately with two different stator designs. Both experimental and numerical studies are conducted to understand the details of the complex flow field present in this stage. Aerodynamic measurements using high-frequency, Kulite pressure transducers and conventional probes are compared with results from a three-dimensional viscous flow analysis. A steady multiple blade row approach is used in the numerical technique to examine the detailed flow structure inside the rotor and the stator passages. The comparisons indicate that many flow field features are correctly captured by viscous flow analysis, and therefore unmeasured phenomena can be studied with some level of confidence.

Numerical investigation of high-pressure turbine blade tip flows: analysis of aerodynamics

2011 ◽  
Vol 225 (7) ◽  
pp. 940-953 ◽  
Author(s):  
P Vass ◽  
T Arts
Keyword(s):  
High Pressure ◽  
Turbine Blade ◽  
Three Dimensional ◽  
Suction Side ◽  
Point Of View ◽  
Internal Cooling ◽  
High Pressure Turbine ◽  
Blade Tip ◽  
Design Solutions ◽  
Exit Mach Number

The current contribution reports on the validation and analysis of three-dimensional computational results of the flow around four distinct high-pressure turbine blade tip geometries (TG1, 2, 3, and 4 hereinafter), taking into account the effect of the entire internal cooling setup inside the blade, at design exit Mach number: M = 0.8, and high exit Reynolds number: Re C = 900 000. Three of the four geometries represent different tip design solutions – TG1: full squealer rim; TG2: single squealer on the suction side; TG3: partial suction and pressure side squealer, and one (TG4) models TG1 in worn condition. This article provides a comparison between the different geometries from the aerodynamic point of view, analyses the losses, and evaluates the distinct design solutions. An assessment of the effect of the uneven rubbing of the blade tip was performed as well. TG1 was found to be the top performer followed by TG3 and TG2. According to the investigations, the effect of rubbing increased the kinetic loss coefficient by 10–15 per cent.

Study the Structure of Three Dimensional Oblique Shock Waves Over Conical Rotor-Vane Surfaces

2005 ◽  
Author(s):  
Khaled Alhussan
Keyword(s):  
Shock Waves ◽  
Flow Structure ◽  
Numerical Technique ◽  
Physical Phenomenon ◽  
Three Dimensional ◽  
Industrial Applications ◽  
Oblique Shock ◽  
Complex Flow ◽  
Compression And Expansion ◽  
Contour Plots

This paper will explain the numerical analysis and the mapping of the flow in a confined region. In this paper some characteristics of non-steady, compressible, flow are explored, including compression and expansion wave interactions and creation. The results will show a promising achievement, first, to understand the flow structure inside a supersonic confined region, second, to use this knowledge to interpolate the numerical results in order to achieve a design methodology that will benefit the industrial applications for example in turbomachinery. Results including contour plots of static pressure, total pressure, and Mach number will show the structure of oblique shock waves in a complex three-dimensional conical surface. A CFD analysis enables one to understand the complex flow structure inside this confined region. Through this computational analysis, a better interpretation of the physical phenomenon of the three dimensional rotting oblique shock waves can be achieved. It is essential to evaluate the ability of numerical technique that can solve problems in which compression and expansion waves occur. In particular it is necessary to understand the details of developing a mesh that will allow resolution of some discontinuities in similar flow.

Sign in / Sign up

Export Citation Format

Share Document