scholarly journals Safety Mining Technology of Coal Seams in Weathered Zone Based on Ground J-Type Pregrouting Reinforcement

2018 ◽  
Vol 2018 ◽  
pp. 1-10
Author(s):  
Min Tu ◽  
Jinlong Cai ◽  
Hualei Zhang ◽  
Chuanxin Rong
Keyword(s):  
Industrial Test ◽  
Coal Seams ◽  
Strata Movement ◽  
Research Results ◽  
Weathered Zone ◽  
Working Face ◽  
Fracture Development ◽  
Seam Mining ◽  
Rock Strata ◽  
Overlying Strata

A thin basement coal seam mining model under different overlying strata conditions was developed using the discrete element software UDEC. This approach is used to discuss the safety mining of the thin basement coal seams. Fracture development in overlying and rock strata movement law in the stope was discussed. The relationship between support and surrounding rocks under different overlying strata conditions was analyzed. Lastly, a field industrial test was conducted based on the research results. A few major conclusions could be drawn. Under load transmission in loose water-bearing strata, causing a large-scaled rock strata movement to advance into the working face is easy when only one bearing stratum exists in the overlying strata. Meanwhile, the support bears strong loads, which can easily be collapsed. When two bearing strata exist in the overlying one, the upper bearing stratum can form a voussoir beam structure. Loads on the support decreased substantially compared with those under single bearing stratum, whilst the probability of pressing frame was reduced accordingly. A weathered zone above the stope was reinforced by ground J-type drilling pregrouting, thereby improving the physical and mechanical properties and increasing the bearing capacity of the rock strata in the grouting range and safety mining of the working face in the lower coal seams. Research results provide important references for the safety mining of thin basement coal seams under similar conditions.

Study on Mountainous Shallow-Buried Coal Seam Mining Working Face Strata Behaviors and Overlying Strata Movement Features

2011 ◽  
Vol 121-126 ◽  
pp. 2911-2916
Author(s):  
Guo Lei Liu ◽  
Ke Gong Fan ◽  
Tong Qiang Xiao
Keyword(s):  
Coal Seam ◽  
Horizontal Displacement ◽  
Simulation Software ◽  
High Rate ◽  
Strata Movement ◽  
Working Face ◽  
Element Simulation ◽  
Valve Opening ◽  
Seam Mining ◽  
Overlying Strata

Through testing the mountainous shallow-buried coal seam mining working face strata behaviors in Faer mine field, it got the strata behaviors: it was of large roof pressure, high rate of safety valve opening in hydraulic support, and even some supports crushed or took separation between top beams and tail beams. Traditional method of calculating supports’ resistance can not be applied to mountainous shallow-buried coal seam mining working face. With the discrete element simulation software UDEC it analyzed the strata movement feature, and got that the overlying strata took collapse and horizontal displacement after mountainous shallow-buried coal seam mined, and the strata movement feature was different between reverse slope mining and positive slope mining.

scholarly journals A Mechanical Model of the Overlying Rock Masses in Undersea Coal Mining and a Stress-Seepage Coupling Numerical Simulation

2018 ◽  
Vol 2018 ◽  
pp. 1-14 ◽  
Author(s):  
Jie Fang ◽  
Lei Tian ◽  
Yanyan Cai ◽  
Zhiguo Cao ◽  
Jinhao Wen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Coal Seam ◽  
Coal Mining ◽  
Water Inrush ◽  
Mining Area ◽  
Analysis Model ◽  
Fractured Zones ◽  
Working Face ◽  
Seam Mining ◽  
Overlying Strata

The water inrush of a working face is the main hidden danger to the safe mining of underwater coal seams. It is known that the development of water-flowing fractured zones in overlying strata is the basic path which causes water inrushes in working faces. In the engineering background of the underwater mining in the Longkou Mining Area, the analysis model and judgment method of crack propagation were created on the basis of the Mohr–Coulomb criterion. Fish language was used to couple the extension model into the FLAC3d software, in order to simulate the mining process of the underwater coal seam, as well as to analyze the initiation evolutionary characteristics and seepage laws of the fractured zones in the overlying strata during the advancing processes of the working face. The results showed that, during the coal seam mining process, the mining fractured zones which had been caused by the compression-shear and tension-shear were mainly concentrated in the overlying strata of the working face. Also, the open-off cut and mining working face were the key sections of the water inrush in the rock mass. The condition of the water disaster was the formation of a water inrush channel. The possible water inrush channels in underwater coal mining are mainly composed of water-flowing fractured zones which are formed during the excavation processes. The numerical simulation results were validated through the practical engineering of field observations on the height of water-flowing fractured zone, which displayed a favorable adaptability.

Study on the Structure Characteristics and Ground Pressure Behavior of Overlying Strata with Shallow Buried Coal Seam

2011 ◽  
Vol 255-260 ◽  
pp. 3780-3785 ◽  
Author(s):  
Lei Yu ◽  
Zhi Zhong Fan ◽  
Gang Xu
Keyword(s):  
Coal Seam ◽  
Ground Subsidence ◽  
Mine Pressure ◽  
Structure Characteristics ◽  
Pressure Behavior ◽  
Ground Pressure ◽  
Working Face ◽  
Periodic Pressure ◽  
Seam Mining ◽  
Overlying Strata

The mine pressure behavior characters of shallow buried coal seam differed from both shallow seam mining and general depth seam. Mine pressure observation and numerical analysis were applied to research mine pressure behavior laws in fully mechanized face of shallow buried coal seam with thick bedrock and thin alluvium. It showed that the ground subsidence level phenomenon did not appear obviously although with obvious dynamic loading of fully mechanized face during the pressure period. The appearance was due to non-synchronized fracture from two key layers in the overlying rock layers and their interaction, which leaded to roof breaking initially and caving rocks with the form of an arch. Due to the periodic breaking and caving characteristics appearing as fully cut-down and arch alternately, the periodic pressure of shallow buried coal seam face showed as different size. The conclusion could be a reference for similar working face control.

scholarly journals The Influence of Fracture Strain Energy on the Burst Tendency of Coal Seams and Field Application

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Hongjun Guo ◽  
Ming Ji ◽  
Dapeng Liu ◽  
Mengxi Liu ◽  
Weisheng Zhao
Keyword(s):  
Strain Energy ◽  
Fracture Strain ◽  
Base Material ◽  
Field Application ◽  
Coal Seams ◽  
Cyclic Loading And Unloading ◽  
Working Face ◽  
Coal Deformation ◽  
Fracture Development ◽  
Plastic Strain Energy

Coal is typically considered a special engineering rock mass because of its low strength, high internal fracture development, good permeability, and random distribution of microparticles and fractures. The results of cyclic loading and unloading tests indicate that the strain energy during the coal deformation process can be divided into three parts: plastic strain energy; fracture strain energy; and base-material strain energy. The energy composition ratio differs depending on coal strength. Lower proportions of fracture strain energy are associated with higher elastic energy indexes, and there is a negative correlation between fracture strain energy and other coal burst tendency indexes. The results were applied on the 4206 isolated island working face of coal mine A in Yan’an, Shanxi, China, yielding good benefits. The findings presented here provide a theoretical basis for understanding the principle of coal seam bursting and guidance for reducing burst risks.

scholarly journals Novel Application of the Roof-Cutting-Type Gob-Side Entry Retaining in Coal Mine

2021 ◽  
Vol 2021 ◽  
pp. 1-16
Author(s):  
Jiong Wang ◽  
Wenfei Li ◽  
Daoyong Zhu ◽  
Weili Gong ◽  
Yi Su
Keyword(s):  
Stable State ◽  
Stress Evolution ◽  
Coal Seams ◽  
Working Face ◽  
Mining Conditions ◽  
Support Resistance ◽  
Stress And Deformation ◽  
Cutting Height ◽  
Roof Deformation ◽  
Overlying Strata

In this study, the roof-cutting-type gob-side entry retaining is introduced, and its application in medium-thickness coal seams is studied. Based on the analysis of the construction procedure and principle, the mechanical model of the retained roadway structure and cantilever beam formed by roof cutting was established, and the support resistance and roof deformation were obtained. In addition, through technological design analysis and numerical simulation, the parameters of roof cutting were determined. The roof-cutting height and angle were designed to be 9 m and 15°, respectively. Flac3 D was used to analyze the stress evolution law under different mining conditions. The stress on the integrated coal side and roof subsidence was lower when the roof-cutting height was 8∼10 m and the cutting angle was 15°. Through field monitoring, the roof pressure, gob-side lateral gangue retaining pressure, anchor cable stress, and deformation of the surrounding rock eventually reached a stable state. This indicates that the roof cutting can effectively cut down the overlying strata over the gob and form a stable entry structure to meet the requirements of the next working face.

scholarly journals Height of the Fractured Zone in Coal Mining under Extra-Thick Coal Seam Geological Conditions

2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Dequan Sun ◽  
Xiaoyan Li ◽  
Zhijie Zhu ◽  
Yang Li ◽  
Fang Cui
Keyword(s):  
Coal Seam ◽  
Coal Mining ◽  
Process Analysis ◽  
Failure Process ◽  
Analysis Method ◽  
Coal Seams ◽  
Fractured Zone ◽  
Seam Mining ◽  
Borehole Televiewer ◽  
Overlying Strata

The height of the fractured zone caused by coal mining is extremely significant for safely mining under water, water conservation, and gas treatment. At present, the common prediction methods of overburden fractured zone height are only applicable to thin and medium-thick coal seams, not suitable for thick and extra-thick coal seams. In order to determine the overburden fractured zone distribution characteristics of extra-thick seam mining, failure process analysis method of overlying strata was proposed based on key strata theory. This method was applied to 15 m coal seam of Tongxin coal mine, and fractured zone height was determined to be 174 m for 8100 panel. EH4 electromagnetic image system and borehole televiewer survey were also conducted to verify the theory results. The distribution of the electrical conductivity showed that the failure height was 150–170 m. Observation through the borehole televiewer showed that the fractured zone height was 171 m. The results of the two field test methods showed that the fractured zone height was 150–171 m, and it was consistent with the theory calculation results. Therefore, this failure process analysis method of overlying strata can be safely used for other coal mines.

scholarly journals The Influences of Key Strata Compound Breakage on the Overlying Strata Movement and Strata Pressure Behavior in Fully Mechanized Caving Mining of Shallow and Extremely Thick Seams: A Case Study

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Junmeng Li ◽  
Yanli Huang ◽  
Jixiong Zhang ◽  
Meng Li ◽  
Ming Qiao ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Abutment Pressure ◽  
Simulation Software ◽  
Strata Movement ◽  
Key Strata ◽  
Pressure Behavior ◽  
Ground Pressure ◽  
Working Face ◽  
Overlying Strata Movement ◽  
Overlying Strata

In order to analyze the impact of compound breakage of key strata on overlying strata movement and strata pressure behavior during the fully mechanized caving mining in shallow and extremely thick seams, this paper took the 1322 fully mechanized caving face in Jindi Coal Mine in Xing County as the engineering background. Under the special mining and geological condition mentioned above, UDEC numerical simulation software was applied to research the engineering problems, and results of numerical simulation were verified through the in-site measurement. The research results showed that during the fully mechanized caving mining in shallow and extremely thick seams, the inferior key strata affected by mining movement behaved in the mode of sliding instability and could not form the stable structure of the voussoir beam after breaking and caving. In addition, the main key strata behaved in the mode of rotary instability, and the caving rocks behind the goaf were gradually compacted because of the periodic instability of the main key strata. With the continuous advance of the working face, the abutment pressure of the working face was affected by the compound breakage and periodic instability of both the inferior key strata and the main key strata, and the peaks of the abutment pressure presented small-big-small-big periodical change characteristics. Meanwhile, the risk of rib spalling ahead of the working face presented different levels of acute or slowing trends. The actual measurement results of ground pressure in the working face showed that, in the working process, the first weighting interval of the inferior key strata was about 51 m and its average periodic weighting interval was about 12.6 m, both of which were basically consistent with the results of numerical simulation. The research has great significance in providing theoretical guidance and practical experience for predicting and controlling the ground pressure under the similar mining and geological conditions.

The Application of Similar Material in the Simulation of Overlying Strata Movement in High Inclined Seam in Dongbaowei Mine

2012 ◽  
Vol 600 ◽  
pp. 194-198 ◽  
Author(s):  
Ming Ming Wen
Keyword(s):  
Coal Seam ◽  
Reference Value ◽  
Geological Condition ◽  
Similar Material ◽  
Strata Movement ◽  
Support Measures ◽  
Working Face ◽  
Overlying Strata Movement ◽  
Similar Material Simulation ◽  
Overlying Strata

Studying on the characteristics of the overlying strata movement in high inclined coal seam, the similar material is applied in the simulation model which was built based on the similar material simulation theory and high inclined seam geological condition of Dongbaowei coal mine. The picture and displacement of overlying strata were obtained from the similar material simulation. As a result, the characteristics of the fracture and movement of overlying strata above the full mechanized working face in high inclined seam. This paper proposes some support measures to improve the safety of the working face. These provide significance theoretical guidance and reference value for other working face in high inclined seam.

Recent Patents on Thin Coal Seam Mining Equipment

2020 ◽  
Vol 13 (2) ◽  
pp. 99-108
Author(s):  
Yanxiang Wang ◽  
Daolong Yang ◽  
Bangsheng Xing ◽  
Tingting Zhao ◽  
Zhiyi Sun ◽  
...  
Keyword(s):  
Coal Seam ◽  
Underground Space ◽  
Mining Method ◽  
Mining Equipment ◽  
Coal Seams ◽  
Thin Coal Seam ◽  
Recoverable Reserves ◽  
Working Face ◽  
Geological Conditions ◽  
Seam Mining

Background:: China's thin and extremely thin coal seam resources are widely distributed and rich in reserves. These coal seams account for 20% of the recoverable reserves, with 9.83 billion tons of industrial reserves and 6.15 billion tons of recoverable reserves. Objective: Due to the complex geological conditions of the thin coal seam, the plow mining method cannot be effectively popularized, and the drum mining method is difficult to be popularized and applied in small and medium-sized coal mines, so it is necessary to find other more advantageous alternative mining methods. Methods: The equipment integrates mining operations, conveying operations, and supporting operations, and is suitable for mining short and extremely thin coal seam with a height of 0.35m-0.8m and width of 2m-20m. It has the advantages of the low body of the shearer, no additional support on the working face, and small underground space. The mining efficiency of thin coal seam and very thin coal seam can be improved and the mining cost can be reduced. Results: Thin coal seam shear mining combines mining, conveying, and supporting processes together and has the advantages of a low fuselage, no extra support required for the working face, and feasibility in a small underground space. Conclusion: The summarized mining method can improve the mining efficiency of thin and extremely thin coal seams, reduce mining costs, and incorporate green mining practices, which take both mining economy and safety into account.

scholarly journals Overlying strata movement with ground penetrating radar detection in close-multiple coal seams mining

2019 ◽  
Vol 15 (8) ◽  
pp. 155014771986985 ◽  
Author(s):  
Yang Li ◽  
Jiachen Wang ◽  
Yiding Chen ◽  
Zhipeng Wang ◽  
Jianpeng Wang
Keyword(s):  
Coal Seam ◽  
Ground Penetrating Radar ◽  
Longwall Mining ◽  
The United States ◽  
Coal Seams ◽  
Strata Movement ◽  
Longwall Panel ◽  
Ground Penetrating ◽  
Overlying Strata Movement ◽  
Overlying Strata

Longwall mining is a productive mining method that has been widely used in China, the United States, Australia, and Europe. However, due to the subsidence caused by coal mining activities, the phenomenon is complex, longwall mining brings the overburden movement issues accompany with the coal recovery. In subsidence trough, the resulting strata and surface ground movements are regarded as largely contemporaneous with mining, producing more or less direct effects of natural ecology. Ground penetrating radar has been widely used in geological hazard detection due to its high precision, but it is rarely employed in underground measuring the overlying strata movement above the longwall panel. In this article, there are five close-multiple coal seams (5#, 7#, 8#, 9#, 12# seams) within 70 m distance to be monitored in Qian Jiaying coal mine of Kailuan Coal Company in Hebei province. The 7#, 8#, 9#, 12# coal seams were already excavated in sequence. So the 5# coal seam is overmining above the gobs of four coal seams at the top. The ZTR12-series ground penetrating radar equipment is used to detect the development of fractures under the floor of the 5# coal seam. The ZTR12-series ground penetrating radar system has the capability of large depth detection and explosion proof to adapt to the working environment of underground coal mines and can realize fine detection and accurate identification. The maximum detection distance of reflection method can reach 50 m. The measurement results show that the 5# coal seam is in the fracture zone above the gobs of four coal seams, and the caved zone of lower coal seam develops to fine sandstone of the 5# coal seam floor. The ground penetrating radar has shown much promise in the detection of overlying strata movement.

Sign in / Sign up

Export Citation Format

Share Document