scholarly journals Arsenic Resistance and Biosorption by Isolated Rhizobacteria from the Roots of Ludwigia octovalvis

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Harmin Sulistiyaning Titah ◽  
Siti Rozaimah Sheikh Abdullah ◽  
Mushrifah Idris ◽  
Nurina Anuar ◽  
Hassan Basri ◽  
...  
Keyword(s):  
Kinetic Model ◽  
Order Kinetic ◽  
Kinetic Rate ◽  
Rate Analysis ◽  
Dry Cell Weight ◽  
Pore Diffusion Model ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Enterobacter Asburiae ◽  
Dry Cell

Certain rhizobacteria can be applied to remove arsenic in the environment through bioremediation or phytoremediation. This study determines the minimum inhibitory concentration (MIC) of arsenic on identified rhizobacteria that were isolated from the roots of Ludwigia octovalvis (Jacq.) Raven. The arsenic biosorption capability of the was also analyzed. Among the 10 isolated rhizobacteria, five were Gram-positive (Arthrobacter globiformis, Bacillus megaterium, Bacillus cereus, Bacillus pumilus, and Staphylococcus lentus), and five were Gram-negative (Enterobacter asburiae, Sphingomonas paucimobilis, Pantoea spp., Rhizobium rhizogenes, and Rhizobium radiobacter). R. radiobacter showed the highest MIC of >1,500 mg/L of arsenic. All the rhizobacteria were capable of absorbing arsenic, and S. paucimobilis showed the highest arsenic biosorption capability (146.4 ± 23.4 mg/g dry cell weight). Kinetic rate analysis showed that B. cereus followed the pore diffusion model (R2 = 0.86), E. asburiae followed the pseudo-first-order kinetic model (R2 = 0.99), and R. rhizogenes followed the pseudo-second-order kinetic model (R2 = 0.93). The identified rhizobacteria differ in their mechanism of arsenic biosorption, arsenic biosorption capability, and kinetic models in arsenic biosorption.

Dyeing mechanism and photodegradation kinetics of gardenia yellow natural colorant

2020 ◽  
pp. 004051752095848
Author(s):  
Huiyu Jiang ◽  
Xiaodong Hu ◽  
Asfandyar Khan ◽  
Jinbo Yao ◽  
Muhammad Tahir Hussain
Keyword(s):  
Kinetic Model ◽  
Cotton Fabric ◽  
Reaction Rate Constant ◽  
Second Order ◽  
Order Kinetic ◽  
Natural Colorant ◽  
Yellow Solution ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Dyeing Rate

In this study, gardenia yellow solution is used to dye 100% cotton fabric. The dyeing rate curve and adsorption isotherms were recorded to explore the thermodynamic model and to calculate the corresponding parameters. A definite concentration of gardenia yellow solution was placed under the xenon arc lamp for irradiation to test its photodegradability. Absorbance of the solution was measured at different degradation times and the corresponding varying curve of the absorbance was drawn to explore the photodegradation reaction order of the natural colorant and consistent parameters were calculated. The experimental results proved that the dyeing of cotton fabric with gardenia yellow colorant followed the pseudo second order kinetic model whereas adsorption isotherm followed the Langmuir model and the photodegradation process followed the second order kinetic model. Values of different parameters were calculated: reaction rate constant k = 2.26 × 10–3 (mg · L−1)1−m h−1, the correlation coefficient R2 = 0.994, and half decay time t1/2 = 5.82 h.

Second-Order Kinetic Model for the Sorption of Cu(II) Ions in Aqueous Solutions of Zeolite NaA

2012 ◽  
Vol 560-561 ◽  
pp. 1174-1177 ◽  
Author(s):  
Dimitar Petrov Georgiev ◽  
Bogdan Iliev Bogdanov ◽  
Yancho Hristov ◽  
Irena Markovska
Keyword(s):  
Kinetic Model ◽  
Aqueous Solutions ◽  
Kinetic Parameters ◽  
Linear Equations ◽  
Linear Method ◽  
Second Order ◽  
Order Kinetic ◽  
Zeolite Naa ◽  
Order Kinetic Model ◽  
Pseudo Second Order

In this study, the sorption of Cu(II) ions in aqueous solutions of Zeolite NaA by performing batch kinetic sorption experiments. The equilibrium kinetic data were analyzed using the pseudo-second-order kinetic model. A comparison was made of the linear least-squares method and nonlinear method of the widely used pseudo-second-order kinetic model for the sorption of Cu(II) ions of Zeolite . Four pseudo-second-order kinetic linear equations are discussed. Kinetic parameters obtained from the four kinetic linear equations using the linear method differed but they were the same when using the non-linear method. Kinetic parameters obtained from four kinetic linear equations using the linear method differed. Equation type 1 pseudo-second-order kinetic model very well represented the kinetic of the adsorption Cu(II) ions by Zeolite NaA. Equation type 4 exhibited the worst fit. Present investigation showed that the non-linear method may be a better way to determine the kinetic parameters.

scholarly journals Comparison of Adsorptive Removal of Total Nitrogen (T-N) and Total Phosphorous (T-P) in Aqueous Solution using Granular Activated Charcoal (GAC)

2013 ◽  
Vol 9 (1) ◽  
pp. 1822-1836
Author(s):  
Keon Sang Ryoo ◽  
Jong-Ha Choi ◽  
Yong Pyo Hong
Keyword(s):  
Aqueous Solution ◽  
Kinetic Model ◽  
Adsorption Capacity ◽  
Total Nitrogen ◽  
Activated Charcoal ◽  
Adsorption Equilibrium ◽  
Order Kinetic ◽  
Total Phosphorous ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The present study is to explore the possibility of utilizing granular activated charcoal (GAC) for the removal of total phosphorous (T-P) and total nitrogen (T-N) in aqueous solution. Batch adsorption studies were carried out to determine the influences of various factors like initial concentration, contact time and temperature. The adsorption data showed that GAC has a similar adsorption capacity for both T-N and T-P. The adsorption degree of T-N and T-P on GAC was highly concentration dependent. It was found that the adsorption capacity of GAC is quite favorable at a low concentration. At concentrations of 1.0 mg L-1 of T-P and 2.0 mg L-1 of T-N, approximately 97 % of adsorption was achieved by GAC. The equilibrium data were fitted well to the Langmuir isotherm model. The pseudo-second-order kinetic model appeared to be the better-fitting model because it has higher R2 compared with the pseudo-first-order and intra-particle kinetic model. The theoretical adsorption equilibrium qe,cal from pseudo-second-order kinetic model were relatively similar to the experimental adsorption equilibrium qe,exp. To evaluate the effect of thermodynamic parameters at different temperatures, the change in free energy ΔG, the enthalpy ΔH and the entropy ΔS were estimated. Except for adsorption of T-P at 278 K, the ΔG values obtained were all negative at the investigated temperatures. It indicates that the present adsorption system occurs spontaneously. The adsorption process of T-N by GAC was exothermic in nature, whereas T-P showed endothermic behavior. In addition, the positive values of ΔS imply that there was the increase in the randomness of adsorption of T-N and T-P at GAC-solution interface.  

scholarly journals Adsorptive Studies for the Removal of Crystal Violet Dye from Aqueous Solution by Using Cicca Acida L. Stem - Activated Carbon

2021 ◽  
Vol 16 (2) ◽  
pp. 436-443
Author(s):  
Sharmila Ramasamy ◽  
Anbarasu Kaliyaperumal ◽  
Thamilarasu Pommanaickar
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Kinetic Model ◽  
Crystal Violet ◽  
Order Kinetic ◽  
Human Beings ◽  
Crystal Violet Dye ◽  
Before And After ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Textile industries discharge wastewater containing various dyes including Crystal Violet dye. These dyes are very harmful for human beings, animals and plants. Therefore, the attempt is made for adsorption framework on elimination of crystal violet dye by using Cicca acida L. stem-activated carbon from aqueous solution carried out under various experimental methods and optimization conditions. Adsorption data modeled with Freundlich, Langmuir and Tempkin adsorption isotherms. Thermodynamic factors like as ∆Ho, ∆So and ∆Go were calculated, which indicated that the adsorption was spontaneous and endothermic nature. Based on kinetic study, pseudo-second order kinetic model was fit compared to the pseudo-first order kinetic model. The adsorbent has been characterized by SEM before and after adsorption of crystal violet dye solution.

scholarly journals Development of Cerium Oxide/Corncob Nanocomposite: A Cost-Effective and Eco-Friendly Adsorbent for the Removal of Heavy Metals

Polymers ◽  
2021 ◽  
Vol 13 (24) ◽  
pp. 4464
Author(s):  
Sidra Gran ◽  
Rukhsanda Aziz ◽  
Muhammad Tariq Rafiq ◽  
Maryam Abbasi ◽  
Abdul Qayyum ◽  
...  
Keyword(s):  
Experimental Data ◽  
Kinetic Model ◽  
Contact Time ◽  
Cost Effective ◽  
Particle Diffusion ◽  
Order Kinetic ◽  
Removal Of Heavy Metals ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order

This research aims to assess the efficiency of the synthesized corncob as a cost-effective and eco-friendly adsorbent for the removal of heavy metals. Therefore, to carry out the intended research project, initially, the corncob was doped with nanoparticles to increase its efficiency or adsorption capacity. The prepared adsorbent was evaluated for the adsorption of cadmium (Cd) and chromium (Cr) from aqueous media with the batch experiment method. Factors that affect the adsorption process are pH, initial concentration, contact time and adsorbent dose. The analysis of Cd and Cr was performed by using atomic absorption spectrometry (AAS), while the characterization of the adsorbent was performed using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results showed that there is a significant difference before and after corncob activation and doping with CeO2 nanoparticles. The maximum removal for both Cd and Cr was at a basic pH with a contact time of 60 min at 120 rpm, which is 95% for Cd and 88% for Cr, respectively. To analyze the experimental data, a pseudo-first-order kinetic model, pseudo-second-order kinetic model, and intra-particle diffusion model were used. The kinetic adsorption studies confirmed that the experimental data were best fitted with the pseudo-second-order kinetic model (R2 = 0.989) and intra-particle diffusion model (R2 = 0.979). This work demonstrates that the cerium oxide/corncob nanocomposite is an inexpensive and environmentally friendly adsorbent for the removal of Cd and Cr from wastewater.

scholarly journals Removal of COD from Groundwater in and Around Industrial Areas - Using Activated Carbon Powder Prepared by Groundnut Foliage and Groundnut Husk

2021 ◽  
Vol 37 (4) ◽  
pp. 922-927
Author(s):  
A. Kistan ◽  
V. Kanchana ◽  
N. K. Geetha ◽  
G. Infant Sujitha
Keyword(s):  
Activated Carbon ◽  
Kinetic Model ◽  
Adsorption Process ◽  
Oxygen Demand ◽  
Carbon Powder ◽  
Order Kinetic ◽  
Industrial Areas ◽  
Sem Image ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The following study explains that the adsorption efficiency of activated carbon used by Groundnut foliage and groundnut husk for the deportation of COD (Chemical Oxygen demand) from groundwater collected from in and around industrial areas of Vellore district was investigated with different activating conditions (Activating agent- KOH, ZnCl2 and H3PO4; Impregnation ratio-1:1,1:2,1:2; and activation temeperture-500-700°C. The activated carbon prepared based on optimized condition has well-developed pore structure and functional groups which is confirmed from SEM image and FTIR analysis respectively. The adsorption equilibrium was reached in 240 min with the isotherm data fitted well in both the model such as Langmuir model and Freundlich’s model indicating chemisorption’s adsorption for the activated carbon. Moreover, the adsorption process was exothermic accompanied by a decrease in irregularity. Furthermore, the adsorption kinetic study indicated that the adsorption process of the prepared sample follows the pseudo-second-order kinetic model compare to the pseudo-first -order kinetic model

scholarly journals Preparation and Characterization of Magadiite–Magnetite Nanocomposite with Its Sorption Performance Analyses on Removal of Methylene Blue from Aqueous Solutions

Polymers ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 607 ◽  
Author(s):  
Mingliang Ge ◽  
Zhuangzhuang Xi ◽  
Caiping Zhu ◽  
Guodong Liang ◽  
Guoqing Hu ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Isotherm ◽  
Kinetic Model ◽  
Aqueous Solutions ◽  
Langmuir Adsorption Isotherm ◽  
Order Kinetic ◽  
Langmuir Adsorption ◽  
Adsorption Performance ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The magadiite–magnetite (MAG–Fe3O4) nanocomposite has great potential applications in the field of biomaterials research. It has been used as a novel magnetic sorbent, prepared by co-precipitation method. It has the dual advantage of having the magnetism of Fe3O4 and the high adsorption capacity of pure magadiite (MAG). MAG–Fe3O4 was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and vibrating sample magnetometer (VSM). The results showed that Fe3O4 nanoparticles were deposited on the interlayer and surface of magadiite. MAG–Fe3O4 was treated as an adsorbent for methylene blue (MB) removal from aqueous solutions. The adsorption properties of MAG–Fe3O4 were investigated on methylene blue; however, the results showed that the adsorption performance of MAG–Fe3O4 improved remarkably compared with MA and Fe3O4. The adsorption capacity of MAG–Fe3O4 and the removal ratio of methylene blue were 93.7 mg/g and 96.2%, respectively (at 25 °C for 60 min, pH = 7, methylene blue solution of 100 mg/L, and the adsorbent dosage 1 g/L). In this research, the adsorption experimental data were fitted and well described using a pseudo-second-order kinetic model and a Langmuir adsorption isotherm model. The research results further showed that the adsorption performance of MAG–Fe3O4 was better than that of MAG and Fe3O4. Moreover, the adsorption behavior of MB on MAG–Fe3O4 was investigated to fit well in the pseudo-second-order kinetic model with the adsorption kinetics. The authors also concluded that the isothermal adsorption was followed by the Langmuir adsorption isotherm model; however, it was found that the adsorption of the MAG–Fe3O4 nanocomposite was a monolayer adsorption.

The Bentonite Copolymer Composite for Removing Lead Ions

2013 ◽  
Vol 750-752 ◽  
pp. 47-50
Author(s):  
Wen Juan He ◽  
Yu Feng He ◽  
Zhen Hua Zhang ◽  
Ju Hua Guo ◽  
Rong Min Wang
Keyword(s):  
Kinetic Model ◽  
Maleic Anhydride ◽  
In Situ Polymerization ◽  
Removal Rate ◽  
Order Kinetic ◽  
Adsorption Dynamics ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Polymer Adsorbent

In this paper, a new kind of clay copolymer adsorbent, bentonite compositing with maleic anhydride (MAH)-acrylic acid (AA)-vinyl acetate (VAc) copolymer (NaB/PMAV) was prepared by in-situ polymerization. It was used as polymer adsorbent for removing Pb (II) ions in wastewater.. Under the optimal condition of adsorption, the removal rate reached to 94.4% and the adsorption capacity got to 235.9 mg/g. Adsorption dynamics were consistent with pseudo-second-order kinetic model and isotherm model can meet the Langmuir isotherm.

scholarly journals Uranium (VI) Recovery from Black Shale Leaching Solutions Using Ion Exchange: Kinetics and Equilibrium Studies

Minerals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 689
Author(s):  
Omirserik Baigenzhenov ◽  
Alibek Khabiyev ◽  
Brajendra Mishra ◽  
M. Deniz Turan ◽  
Merey Akbarov ◽  
...  
Keyword(s):  
Kinetic Model ◽  
Sorption Isotherm ◽  
Room Temperature ◽  
Sorption Kinetics ◽  
Second Order ◽  
Order Kinetic ◽  
Strong Base ◽  
Maximum Sorption Capacity ◽  
Order Kinetic Model ◽  
Pseudo Second Order

This work studies the removal of uranium ions from chemically leached solutions by sorption using two weak and two strong base anionites. Batch sorption experiments were performed to evaluate the optimum conditions at pH 1.2–2.2, 1.0 g resin dose for 1–12 h contact time at room temperature. These experiments addressed sorption kinetics and sorption isotherm. The maximum sorption capacity reached 55.8 mg/g at room temperature. The kinetics data are well described by the pseudo-second-order kinetic model at initial uranium concentration of 0.62 mg·L−1. To describe sorption kinetics pseudo-first-order, pseudo-second-order and intraparticle diffusion models were proposed. Studies indicated that the sorption of uranium can be fitted by a pseudo-second-order kinetic model very well. Equilibria were described by Langmuir, Freundlich, and Dubinin–Radushkevich equations. The experimental sorption isotherm is successfully described by the Langmuir model.

scholarly journals Carbonized Lanthanum-Based Metal-Organic Framework with Parallel Arranged Channels for Azo-Dye Adsorption

Nanomaterials ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 1053
Author(s):  
Krzysztof Cendrowski ◽  
Karolina Opała ◽  
Ewa Mijowska
Keyword(s):  
Kinetic Model ◽  
Adsorption Kinetics ◽  
Hydrophobic Interactions ◽  
Metal Organic Framework ◽  
Second Order ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Metal Organic ◽  
Pseudo Second Order ◽  
Organic Framework

In this contribution, the synthesis of the metal−organic framework (MOF) based on lanthanum that exhibits trigonal prism shape is presented. The length of a single side of this structure ranges from 2 to 10 μm. The carbonized lanthanum-based organic framework (CMOF–La) maintained the original shape. However, the lanthanum oxide was reshaped in the form of rods during the carbonization. It resulted in the creation of parallel arranged channels. The unique structure of the carbonized structure motivated us to reveal its adsorption performance. Therefore, the adsorption kinetics of acid red 18 onto a carbonized metal−organic framework were conducted. Various physicochemical parameters such as initial dye concentration and pH of dye solution were investigated in an adsorption process. The adsorption was found to decrease with an increase in initial dye concentration. In addition, the increase in adsorption capacity was noticed when the solution was changed to basic. Optimal conditions were obtained at a low pH. Kinetic adsorption data were analyzed using the pseudo-first-order kinetic model, the pseudo-second-order kinetic model and the intraparticle diffusion model. The adsorption kinetics were well fitted using a pseudo-second-order kinetic model. It was found that the adsorption of anionic dye onto CMOF–La occurs by hydrophobic interactions between carbonized metal-organic framework and acid red 18.

Sign in / Sign up

Export Citation Format

Share Document