scholarly journals The QoS Indicators Analysis of Integrated EUHT Wireless Communication System Based on Urban Rail Transit in High-Speed Scenario

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Xiaoxuan Wang ◽  
Hailin Jiang ◽  
Tao Tang ◽  
Hongli Zhao
Keyword(s):  
Wireless Communication ◽  
Communication System ◽  
High Speed ◽  
Urban Rail Transit ◽  
Rail Transit ◽  
Transit System ◽  
Wireless Communication System ◽  
Handoff Latency ◽  
Urban Rail ◽  
Set Up

Nowadays, in urban rail transit systems, train wayside communication system uses Wireless Local Area Network (WLAN) as wireless technologies to achieve safety-related information exchange between trains and wayside equipment. However, according to the high speed mobility of trains and the limitations of frequency band, WLAN is unable to meet the demands of future intracity and intercity rail transit. And although the Time Division-Long Term Evolution (TD-LTE) technology has high performance compared with WLAN, only 20 MHz bandwidth can be used at most. Moreover, in high-speed scenario over 300 km/h, TD-LTE can hardly meet the future requirement as well. The equipment based on Enhanced Ultra High Throughput (EUHT) technology can achieve a better performance in high-speed scenario compared with WLAN and TD-LTE. Furthermore, it allows using the frequency resource flexibly based on 5.8 GHz, such as 20 MHz, 40 MHz, and 80 MHz. In this paper, we set up an EUHT wireless communication system for urban rail transit in high-speed scenario integrated all the traffics of it. An outdoor testing environment in Beijing-Tianjin High-speed Railway is set up to measure the performance of integrated EUHT wireless communication system based on urban rail transit. The communication delay, handoff latency, and throughput of this system are analyzed. Extensive testing results show that the Quality of Service (QoS) of the designed integrated EUHT wireless communication system satisfies the requirements of urban rail transit system in high-speed scenario. Moreover, compared with testing results of TD-LTE which we got before, the maximum handoff latency of safety-critical traffics can be decreased from 225 ms to 150 ms. The performance of throughput-critical traffics can achieve 2-way 2 Mbps CCTV and 1-way 8 Mbps PIS which are much better than 2-way 1 Mbps CCTV and 1-way 2 Mbps PIS in TD-LTE.

Ticket Income Distribution of Urban Rail Transit in Network Operating Condition

2011 ◽  
Vol 243-249 ◽  
pp. 4375-4380
Author(s):  
Yuan Chun Huang ◽  
Jian Li ◽  
Haize Pan
Keyword(s):  
Income Distribution ◽  
Urban Rail Transit ◽  
Ratio Method ◽  
Rail Transit ◽  
Matching Algorithm ◽  
Factors Affecting ◽  
Urban Rail ◽  
Set Up ◽  
Urban Rail Transit Network ◽  
Factor Matching

Through analyzing the factors affecting passengers’ path-choice, the corresponding principles and rules of the ticket income distribution are put forward and the new model of the Urban Rail Transit Network in Beijing is set up in the paper. Through the deformation of the urban rail transit and the simplification of the lines, the topology of the urban rail transit lines is abstracted into an undirected connection graph. Breadth-priority optimization algorithm is applied to search the effective paths between the OD and the flow-matching ratio is acquired by calculating based on multi-factor matching algorithm, in which many relevant numerical examples are analyzed to verify the feasibility of the dual-ratio method and to summarize the characteristics of the project.

scholarly journals Overview of Anti-Seismic Researches of Underground Structures

2018 ◽  
Vol 38 ◽  
pp. 03038
Author(s):  
Ran Liao
Keyword(s):  
Research Methods ◽  
Underground Structure ◽  
Seismic Damage ◽  
Urban Rail Transit ◽  
Rail Transit ◽  
Underground Structures ◽  
Transit System ◽  
Urban Rail ◽  
Subway System ◽  
Metro System

With the vigorous development of urban rail transit system, especially the construction of subway system, the safety of subway system draws more and more attention. The study of anti-seismic for underground structures has also become an important problem to be solved in the construction of Metro system. Based on the typical underground structure seismic damage phenomenon, this paper summarizes the seismic characteristics, research methods and design methods of underground structures to offer a guide for engineers.

scholarly journals Study on the Scale Determination of Urban Rail Transfer Station

2012 ◽  
Vol 5 ◽  
pp. 71-76
Author(s):  
Yu Ping Wang ◽  
Ya Ping Zhang ◽  
Hui Zhi Xu
Keyword(s):  
Service Level ◽  
Urban Rail Transit ◽  
Rail Transit ◽  
Entire System ◽  
Transit System ◽  
Urban Rail ◽  
Transfer Station ◽  
Cross Platform

As the major distributing center and intermediate transit point, the scale of transfer station in urban rail transit system directly affects the operational efficiency and overall cost of the entire system. So, accurately controlling the scale of transfer station becomes one of the most important aspects in improving service level and reducing the overall project cost. On the basis of summarizing the method on determining the scale of transfer station both home and abroad, the paper describes the role of the various facilities in rail transfer station, and illustrates the problems of our rail transfer station. Following the above discussion and investigation, the sizes of typical transfer station facilities are discussed and improved (e.g. vertical elevator). Taking the Longjiang Street station example, the proposed methods and models are verified and the analysis result shows that this transfer station should be cross platform interchange mode.

scholarly journals URBAN RAIL TRANSIT PASSENGER SERVICE QUALITY EVALUATION BASED ON THE KANO–ENTROPY–TOPSIS MODEL: THE CHINA CASE

Transport ◽  
2021 ◽  
Vol 0 (0) ◽  
pp. 1-12
Author(s):  
Wencheng Huang ◽  
Yue Zhang ◽  
Yifei Xu ◽  
Rui Zhang ◽  
Minhao Xu Xu ◽  
...  
Keyword(s):  
Service Quality ◽  
Quality Indicators ◽  
Quality Indicator ◽  
Urban Rail Transit ◽  
Rail Transit ◽  
Kano Model ◽  
Transit System ◽  
Urban Rail ◽  
The Difference ◽  
Topsis Model

In order to evaluate the URTPSQ (Urban Rail Transit Passenger Service Quality) comprehensively, find the shortage of URTPSQ, find out the difference between the actual service situation and the passenger’s expectation and demand,and provide passengers with better travel services, a passenger-oriented KANO–Entropy–TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) method is proposed and applied in this paper. Firstly, a KANO model is applied to select the service quality indicators from the 24 URTPSQ evaluation sub-indicators, according to the selection results, the KANO service quality indicators of URTPSQ are constructed. Then the sensitivity of the KANO service quality indicators based on the KANO model are calculated and ranked, the PS (Passenger Satisfaction) of each KANO service quality indicator by using the Entropy–TOPSIS method is calculated and ranked. Based on the difference between the sensitivity degree rank and the satisfaction degree rank of each KANO service quality indicator, determine the service quality KANO indicators of the URTPSQ that need to be improved significantly. A case study is conducted by taking the Chengdu subway system in China as a background. The results show that the Chengdu subway operation enterprises should pay attention to the must-be demand first, then the one-dimensional demand, finally the attractive demand. The three indicators, including transfer on the same floor in the station, service quality of staffs of urban rail transit enterprises,and cleanness in the station and passenger coach, need to be improved urgently. For the managers and operators of urban rail transit system, the passengers’ must-be demand should be satisfied first if the KANO model is applied to evaluate the service. The indicators with highest sensitivity degree and lowest TOPSIS value should be improved based on the KANO–Entropy–TOPSIS model.

Sign in / Sign up

Export Citation Format

Share Document