scholarly journals Global Trends in Application of Stereology as a Quantitative Tool in Biomedical Research

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Maulilio J. Kipanyula ◽  
Alfred S. Sife
Keyword(s):  
Biomedical Research ◽  
Comparative Method ◽  
Three Dimensional ◽  
Great Majority ◽  
Prolific Author ◽  
Global Trends ◽  
Morphological Studies ◽  
Geometrical Features ◽  
Dimensional Parameters ◽  
Scientometric Study

Stereology is a quantitative and comparative method that utilizes planes, lines, and points for the estimation of three-dimensional parameters in morphological studies. It primarily focuses on geometrical features of objects such as number, density, length, area, and volume. A scientometric study was conducted to analyze global research trends in application of stereology in biomedical research. Stereology has gained wide application resulting into design-based stereological methods. Data for this study were retrieved from the SCOPUS database. At least 5,732 publications employing stereology as analytical tool were produced in a period of 50 years between 1966 and 2016. Half (2,858; 49.87%) of these publications were produced in the last 12 years from 2005 to 2016. The relative growth rate (RGR) of publications decreased from 1967 (0.69) to 2016 (0.03) whereas the doubling time (DT) increased from 1.00 to 20.56 in the same period. A great majority (5,332; 93.02%) of the publications retrieved from SCOPUS were journal articles in various biomedical fields. The Journal of Microscopy tops the list of journals with at least 205 articles. The most productive country was USA with at least 1663 (23.10%) publications and Aarhus Universitet tops the list of institutions with at least 306 publications. J.R. Nyengaard was the most prolific author who contributed at least 125 publications. The highly cited article had a total of 2,054 citations with an average of over 82 citations per year. Given the growing importance of stereology in biomedical research, it is necessary to promote its application among scholars.

Applications of Scanning Microscopy in Biomedical Research

1968 ◽  
Vol 26 ◽  
pp. 354-355
Author(s):  
T. L. Hayes
Keyword(s):  
Information Content ◽  
Biomedical Research ◽  
Biomedical Applications ◽  
Three Dimensional ◽  
Dental Enamel ◽  
Resolving Power ◽  
Whole Mount ◽  
Two Parameters ◽  
Content Information ◽  
Sectioned Tissue

Biomedical applications of the scanning electron microscope (SEM) have increased in number quite rapidly over the last several years. Studies have been made of cells, whole mount tissue, sectioned tissue, particles, human chromosomes, microorganisms, dental enamel and skeletal material. Many of the advantages of using this instrument for such investigations come from its ability to produce images that are high in information content. Information about the chemical make-up of the specimen, its electrical properties and its three dimensional architecture all may be represented in such images. Since the biological system is distinctive in its chemistry and often spatially scaled to the resolving power of the SEM, these images are particularly useful in biomedical research.In any form of microscopy there are two parameters that together determine the usefulness of the image. One parameter is the size of the volume being studied or resolving power of the instrument and the other is the amount of information about this volume that is displayed in the image. Both parameters are important in describing the performance of a microscope. The light microscope image, for example, is rich in information content (chemical, spatial, living specimen, etc.) but is very limited in resolving power.

scholarly journals Magnetotelluric study in the Los Lagos Region (Chile) to investigate volcano-tectonic processes in the Southern Andes

2021 ◽  
Vol 73 (1) ◽  
Author(s):  
Maria Jose Segovia ◽  
Daniel Diaz ◽  
Katarzyna Slezak ◽  
Felipe Zuñiga
Keyword(s):  
Electrical Resistivity ◽  
Three Dimensional ◽  
Phase Changes ◽  
Fault System ◽  
Electrical Anisotropy ◽  
Mountain Range ◽  
Southern Andes ◽  
Nazca Plate ◽  
First Results ◽  
Dimensional Parameters

AbstractTo analyze the process of subduction of the Nazca and South American plates in the area of the Southern Andes, and its relationship with the tectonic and volcanic regime of the place, magnetotelluric measurements were made through a transversal profile of the Chilean continental margin. The data-processing stage included the analysis of dimensional parameters, which as first results showed a three-dimensional environment for periods less than 1 s and two-dimensional for periods greater than 10 s. In addition, through the geomagnetic transfer function (tipper), the presence of structural electrical anisotropy was identified in the data. After the dimensional analysis, a deep electrical resistivity image was obtained by inverting a 2D and a 3D model. Surface conductive anomalies were obtained beneath the central depression related to the early dehydration of the slab and the serpentinization process of the mantle that coincides in location with a discontinuity in the electrical resistivity of a regional body that we identified as the Nazca plate. A shallow conductive body was located around the Calbuco volcano and was correlated with a magmatic chamber or reservoir which in turn appears to be connected to the Liquiñe Ofqui fault system and the Andean Transverse Fault system. In addition to the serpentinization process, when the oceanic crust reaches a depth of 80–100 km, the ascending fluids produced by the dehydration and phase changes of the minerals present in the oceanic plate produce basaltic melts in the wedge of the subcontinental mantle that give rise to an eclogitization process and this explains a large conductivity anomaly present beneath the main mountain range.

Theoretical analysis of SWCNT- MWCNT/H2O hybrid flow over an upward/downward moving rotating disk

2021 ◽  
pp. 239779142098028
Author(s):  
R.J. Punith Gowda ◽  
R. Naveenkumar ◽  
J.K. Madhukesh ◽  
B.C. Prasannakumara ◽  
Rama Subba Reddy Gorla
Keyword(s):  
Heterogeneous Reaction ◽  
Three Dimensional ◽  
Rotating Disk ◽  
Heterogeneous Reactions ◽  
Hybrid Nanofluid ◽  
Boundary Constraints ◽  
Wide Range ◽  
Contraction Parameter ◽  
Dimensional Parameters ◽  
Source Sink

The flow-through various disk movement has wide range of applications in manufacturing processes like, computer storage equipment’s, rotating machines, electronic and various types of medical equipment’s. Inspired from these applications, here we scrutinised the consequences of homogeneous-heterogeneous reactions and uniform heat source/sink on the three-dimensional (3D) hybrid SWCNT-MWCNT’s flow on time dependent moving upward/downward rotating disk. The renowned innovation of this paper is the application of the hybrid nanofluid made up of SWCNT and MWCNT’s. Heat generation/absorption effect for the disk that does not move up or down creates a dual flow on the disk. Alternatively, the rotation and upright motion of the disk creates a 3D flow on the surface which has not been considered in the open literature. The modelled PDE’s are reduced in to ODE’s by opting suitable similarity variables and boundary constraints. Here, we used RKF-45 method to obtain the numerical approximations by adopting shooting technique. The analysis of rate of heat transfer is done through graphs. Further, change in velocity, thermal and concentration profiles for various non-dimensional parameters are deliberated briefly and illustrated with the help of suitable plots. The results reveal that, the, rise in values of homogeneous and heterogeneous reaction parameters improve the rate of reaction which results in reduction of the distribution rate and diminishes the concentration gradient. An increase in expansion/contraction parameter enhances the velocity and thermal gradients.

scholarly journals EZ Clear for simple, rapid, and robust mouse whole organ clearing

2022 ◽  
Author(s):  
Chih-Wei Hsu ◽  
Juan Cerda ◽  
Jason M Kirk ◽  
Williamson D. Turner ◽  
Tara L. Rasmussen ◽  
...  
Keyword(s):  
Biomedical Research ◽  
Room Temperature ◽  
Adult Mouse ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Fluorescence Signal ◽  
Tissue Architecture ◽  
Tissue Clearing ◽  
Clearing Method ◽  
Three Dimensional Space

Tissue clearing for whole organ cell profiling has revolutionized biology and imaging for exploration of organs in three-dimensional space without compromising tissue architecture. But complicated, laborious procedures, or expensive equipment, as well as the use of hazardous, organic solvents prevents the widespread adoption of these methods. Here we report a simple and rapid tissue clearing method, EZ Clear, that can clear whole adult mouse organs in 48 hours in just three simple steps. Samples stay at room temperature and remain hydrated throughout the clearing process, preserving endogenous and synthetic fluorescence, without altering sample size. After wholemount clearing and imaging, EZ Cleared samples can be further processed for downstream embedding and cryosectioning followed by standard histology or immunostaining, without loss of endogenous or synthetic fluorescence signal. Overall, the simplicity, speed, and flexibility of EZ Clear make it easy to adopt and apply to diverse approaches in biomedical research.

scholarly journals Modeling of the Mechanical Behavior of 3D Bioplotted Scaffolds Considering the Penetration in Interlocked Strands

2018 ◽  
Vol 8 (9) ◽  
pp. 1422 ◽  
Author(s):  
Saman Naghieh ◽  
M. Sarker ◽  
Mohammad Karamooz-Ravari ◽  
Adam McInnes ◽  
Xiongbiao Chen
Keyword(s):  
Mechanical Properties ◽  
Elastic Modulus ◽  
Mechanical Behavior ◽  
Model Development ◽  
Three Dimensional ◽  
The Finite Element Method ◽  
Hydrogel Scaffolds ◽  
Important Index ◽  
Geometrical Features ◽  
Scaffold Structure

Three-dimensional (3D) bioplotting has been widely used to print hydrogel scaffolds for tissue engineering applications. One issue involved in 3D bioplotting is to achieve the scaffold structure with the desired mechanical properties. To overcome this issue, various numerical methods have been developed to predict the mechanical properties of scaffolds, but limited by the imperfect representation of one key feature of scaffolds fabricated by 3D bioplotting, i.e., the penetration or fusion of strands in one layer into the previous layer. This paper presents our study on the development of a novel numerical model to predict the elastic modulus (one important index of mechanical properties) of 3D bioplotted scaffolds considering the aforementioned strand penetration. For this, the finite element method was used for the model development, while medium-viscosity alginate was selected for scaffold fabrication by the 3D bioplotting technique. The elastic modulus of the bioplotted scaffolds was characterized using mechanical testing and results were compared with those predicted from the developed model, demonstrating a strong congruity between them. Once validated, the developed model was also used to investigate the effect of other geometrical features on the mechanical behavior of bioplotted scaffolds. Our results show that the penetration, pore size, and number of printed layers have significant effects on the elastic modulus of bioplotted scaffolds; and also suggest that the developed model can be used as a powerful tool to modulate the mechanical behavior of bioplotted scaffolds.

Micro-CT analysis of two-dimensional and three-dimensional parameters in severely curved roots prepared with 3 instrumentation systems: An in vitro study

2020 ◽  
Vol 9 (2) ◽  
pp. 62
Author(s):  
AntonioMiranda da Cruz-Filho ◽  
LuisEduardo Souza-Flamini ◽  
BrunoMonguilhott Crozeta ◽  
RicardoGariba Silva ◽  
RicardoNovak Savioli ◽  
...  
Keyword(s):  
Three Dimensional ◽  
In Vitro Study ◽  
Vitro Study ◽  
Two Dimensional ◽  
Micro Ct ◽  
Ct Analysis ◽  
Dimensional Parameters
Sign in / Sign up

Export Citation Format

Share Document