scholarly journals Seismic Stability Analysis of Saturated and Unsaturated Soil Slopes Using Permanent Displacement

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Shuai Huang ◽  
Yanju Peng
Keyword(s):  
Pore Water ◽  
Unsaturated Soil ◽  
Calculation Method ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Simple Calculation ◽  
Seismic Stability ◽  
Permanent Displacement ◽  
Soil Slopes

The permanent displacement has been widely used for slope seismic stability in practical engineering; however, the effect of the dynamic pore water pressure on the saturated and unsaturated soil slopes could not be neglected. In this paper, we propose a calculation method of dynamic pore water pressure by the hollow cylinder apparatus (GCTS) which is the most advanced and complicated device in lab testing on soil dynamics. Then, based on the proposed calculation method of dynamic pore water pressure combined with the limit equilibrium and finite element methods, we introduce a simple calculation method of permanent displacement, which avoids solving complex nonlinear equations and greatly simplifies the computational effort. Shaking table test results demonstrate the effectiveness and efficiency of the simple calculation method of permanent displacement, which could rapidly assess the soil slope seismic stability considering the effect of dynamic pore water pressure.

scholarly journals Numerical Analysis of the Effects of Crack Characteristics on the Stress and Deformation of Unsaturated Soil Slopes

Water ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 194 ◽  
Author(s):  
Liuxin Yang ◽  
Enlong Liu
Keyword(s):  
Pore Water ◽  
Unsaturated Soil ◽  
Crack Width ◽  
Evaporation Rate ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Infiltration Rate ◽  
Soil Slope ◽  
Soil Slopes ◽  
Stress And Deformation

Cracks induced by evaporation or rainfall have a great influence on the stability of unsaturated soil slopes, which can lead to landslides during the rainfall process. In order to study the effect of crack characteristics on the evolution of stress and deformation of unsaturated soil slopes, a series of numerical analyses under different conditions were performed using a coupled elastoplastic finite element program that we developed for unsaturated soil. When carrying out the numerical analyses, the effective stress for unsaturated soil proposed by Bishop and an elastoplastic double-hardening constitutive model for the soil skeleton were employed. The varying parameters, including the crack location, the discharge speed, evaporation rate, infiltration rate, and tensile strength, were investigated to study the coupling process of pore water pressure and deformation in the process of evaporation and rainfall infiltration. The numerical results showed that the minimum pore water pressure of the soil slope at the end of evaporation/rainfall decreased gradually and the crack width increased gradually as the crack set closer to the slope; the larger the discharge speed of pore air, the greater the crack width. With the increase in the evaporation rate, the pore water pressure of the soil slope reduced and the crack initiated earlier and became wider. As the infiltration rate increased, the pore water pressure of the soil slope and the crack width increased, but the decreasing duration became shorter. The change of tensile strength had little effect on the pore water pressure, but the development of the crack width changed with evaporation and rainfall infiltration.

scholarly journals Evaluation on slope stability of unsaturated soils

2000 ◽  
Vol 22 ◽  
Author(s):  
L. J. Wang ◽  
M. Zhang
Keyword(s):  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Matric Suction ◽  
Groundwater Table ◽  
Degree Of Saturation ◽  
Engineering Properties ◽  
Soil Slopes

In drought-prone and semiarid areas, the groundwater table is deep and the soils are at an unsaturated state because of evaporation or transpiration. The negative pore water pressure or matric suction (ua-uw) is an important property of unsaturated soils that are situated above the groundwater table. In the conditions of rainfall, ground seepage, or drainpipe leakage, the matric suction will decrease with the increase of the degree of saturation, and the soils will lose their part of shear strength, which is the main reason why many unsaturated soil slopes become unstable. This paper discusses the engineering properties of unsaturated soils. Following the limit equilibrium principle, the unsaturated soil slopes are evaluated by applying the slice method.

Infiltration characteristics of two instrumented residual soil slopes

2003 ◽  
Vol 40 (5) ◽  
pp. 1012-1032 ◽  
Author(s):  
Illias Tsaparas ◽  
Harianto Rahardjo ◽  
David G Toll ◽  
Eng-Choon Leong
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Field Measurements ◽  
Residual Soil ◽  
Rainfall Runoff ◽  
Rainfall Events ◽  
Pore Water Pressures ◽  
Soil Slopes ◽  
Pressure Changes

This paper presents the analysis of a 12 month long field study of the infiltration characteristics of two residual soil slopes in Singapore. The field measurements consist of rainfall data, runoff data of natural and simulated rainfall events, and pore-water pressure changes during infiltration at several depths and at several locations on the two slopes. The analysis of the field measurements identifies the total rainfall and the initial pore-water pressures within the two slopes as the controlling parameters for the changes in the pore-water pressures within the slopes during infiltration.Key words: infiltration, rainfall, runoff, pore-water pressure, field measurements.

Downslope movements at shallow depths related to cyclic pore-pressure changes

1993 ◽  
Vol 30 (3) ◽  
pp. 464-475 ◽  
Author(s):  
K.D. Eigenbrod
Keyword(s):  
Pore Water ◽  
Slip Surface ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Ground Surface ◽  
Soil Mass ◽  
Passive Resistance ◽  
Pressure Changes ◽  
Timber Piles

Slow, shallow ground movements in a slope near Yellowknife caused excessive tilting of timber piles that supported an engineering structure. To avoid damage to the structure, the pile foundations had to be replaced by rigid concrete piers that were designed to resist the forces of the moving soil mass. Downhill movements were rather slow and, during an initial inspection, were indicated only by soil that was pushed up against a series of piles on their uphill sides, while gaps had formed on their downhill sides. No open cracks or bulging was observed on the slope. A stability analysis indicated that the slope was not in a state of limit equilibrium. To obtain a better understanding of the creep movements in the slope and their effect on the rigid concrete piers, extensive instrumentation was carried out after the construction of the piers. This included slope indicators, piezometers, thermistors, and total-pressure cells against one of the concrete piers. In addition, a triaxial testing program was undertaken in which the effect of cyclic pore-water pressure changes on the long-term deformations of the shallow clay layer was investigated. From the data collected in the field and laboratory, it could be concluded that (i) tilting of the original timber piles was caused by downslope movements related to cyclic pore-water increases; (ii) the lateral soil movements increased almost linearly with depth from 2 m below the ground surface, with no indication of a slip surface; and (iii) the pressures exerted by the moving soil mass against the rigid concrete piers within the soil mass were equal to the passive resistance activated within the moving soil mass. Key words : soil creep, slope movements, soil pressures, pore-water pressures, freezing pressures, permafrost, cyclic loading.

Analyses for the stability of potash tailings piles

1993 ◽  
Vol 30 (3) ◽  
pp. 491-505 ◽  
Author(s):  
Delwyn G. Fredlund ◽  
Zai Ming Zhang ◽  
Karen Macdonald
Keyword(s):  
Slope Stability ◽  
Pore Water ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Field Studies ◽  
Equilibrium Analysis ◽  
Limit Equilibrium Analysis ◽  
Dissipation Model ◽  
The Stability

The stability of potash tailings piles is investigated using a pore-water pressure generation and dissipation model together with a limit equilibrium analysis. It is found that a shallow toe failure mode is generally the most applicable and that the stability may be influenced by pore-water pressure migration below the pile. It is suggested that field studies would be useful in evaluating stability in the toe region of the pile. Key words : potash tailings, slope stability, pore pressure dissipation, solutioning.

Limit equilibrium analysis for the design of backfilled stope barricades made of waste rock

2011 ◽  
Vol 48 (11) ◽  
pp. 1713-1728 ◽  
Author(s):  
Li Li ◽  
Michel Aubertin
Keyword(s):  
Pore Water ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Waste Rock ◽  
Equilibrium Analysis ◽  
Mining Operations ◽  
Limit Equilibrium Analysis ◽  
Fill Material

Backfilling of underground stopes is commonly applied in mining operations. Barricades are required to hold the fill material in the stope during and after placement. As such barricades may be constructed with waste rock, there is a need to develop solutions to analyse their response. This paper presents a limit equilibrium analysis solution for defining the dimensions of waste rock barricades. The proposed solution applies to drained (without pore-water pressure) and submerged (with pore-water pressure) conditions. The solutions are presented and applied to sample cases.

scholarly journals Analysis of shallow failures triggered by the 14-16 November 2002 event in the Albaredo valley, Valtellina (Northern Italy)

2005 ◽  
Vol 2 ◽  
pp. 305-308 ◽  
Author(s):  
S. Dapporto ◽  
P. Aleotti ◽  
N. Casagli ◽  
G. Polloni
Keyword(s):  
Pore Water ◽  
Slope Failure ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Coupled Analysis ◽  
Element Analysis ◽  
Seepage Analysis ◽  
The North ◽  
Pressure Distributions

Abstract. On 14-16 November 2002 the North Italy was affected by an intense rainfall event: in the Albaredo valley (Valtellina) more than 200 mm of rain fell triggering about 50 shallow landslides, mainly soil slips and soil slip-debris flows. Landslides occurred above the critical rainfall thresholds computed by Cancelli and Nova (1985) and Ceriani et al. (1994) for the Italian Central Alps: in fact the cumulative precipitation at the soil slips initiation time was 230 mm (in two days) with a peak intensity of 15 mm/h. A coupled analysis of seepage and instability mechanisms is performed in order to evaluate the potential for slope failure during the event. Changes in positive and negative pore water pressures during the event are modelled by a finite element analysis of water flow in transient conditions, using as boundary condition for the nodes along the slope surface the recorded rainfall rate. The slope stability analysis is conducted applying the limit equilibrium method, using pore water pressure distributions obtained in the different time steps by the seepage analysis as input data for the calculation of the factor of safety.

Analysis of Seepage Field and Stability of Clinosol Slope under Rainfall Infiltration

2013 ◽  
Vol 353-356 ◽  
pp. 307-311 ◽  
Author(s):  
Xi Yi Yang ◽  
Fang Guo
Keyword(s):  
Moisture Content ◽  
Pore Water ◽  
Rainfall Intensity ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Rainfall Infiltration ◽  
Seepage Field ◽  
Volumetric Moisture Content ◽  
Initial Stage

In order to research on slope seepage field and slop stability under rainfall infiltration, this paper combines finite element with limit equilibrium theory to study. The results show that under rainfall, pore water pressure of the slope crest and slope toe in slope wash is greatly influenced by rainfall; Change in the volume moisture content is more sensitive than pore water pressure, volumetric moisture content of each location is increasing quickly at the initial stage of rain, volumetric moisture content in the lower locations is the first to reach saturated due to the continued supply and gravity of the rain; The slope stability reduces with rainfall infiltration, the greater the rainfall intensity, the more obvious decline the slope safety factor.

Sign in / Sign up

Export Citation Format

Share Document