scholarly journals Effect of Thermal Environment on the Mechanical Behaviors of Building Marble

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
Haijian Su ◽  
Hongwen Jing ◽  
Qian Yin ◽  
Liyuan Yu
Keyword(s):  
Mechanical Properties ◽  
Uniaxial Compression ◽  
Building Materials ◽  
Elasticity Modulus ◽  
Thermal Environment ◽  
Peak Stress ◽  
Compression Tests ◽  
Mechanical Behaviors ◽  
Thermal Environments ◽  
Concrete Building

High temperature and thermal environment can influence the mechanical properties of building materials worked in the civil engineering, for example, concrete, building rock, and steel. This paper examines standard cylindrical building marble specimens (Φ50 × 100 mm) that were treated with high temperatures in two different thermal environments: vacuum (VE) and airiness (AE). Uniaxial compression tests were also carried out on those specimens after heat treatment to study the effect that the thermal environment has on mechanical behaviors. With an increase in temperature, the mechanical behavior of marble in this study indicates a critical temperature of 600°C. Both the peak stress and elasticity modulus were larger for the VE than they were for the AE. The thermal environment has an obvious influence on the mechanical properties, especially at temperatures of 450∼750°C. The failure mode of marble specimens under uniaxial compression is mainly affected by the thermal environment at 600°C.

Comparison Analysis on the Mechanical Properties of HSC and NSC after the Action of High Temperatures

2014 ◽  
Vol 1014 ◽  
pp. 49-52
Author(s):  
Xiao Ping Su
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
High Temperatures ◽  
High Strength Concrete ◽  
Elasticity Modulus ◽  
Strain Curve ◽  
Peak Stress ◽  
High Strength ◽  
Peak Strain ◽  
Strength Concrete

With the wide application of high strength concrete in the building construction,the risk making concrete subject to high temperatures during a fire is increasing. Comparison tests on the mechanical properties of high strength concrete (HSC) and normal strength concrete (NSC) after the action of high temperature were made in this article, which were compared from the following aspects: the peak stress, the peak strain, elasticity modulus, and stress-strain curve after high temperature. Results show that the laws of the mechanical properties of HSC and NSC changing with the temperature are the same. With the increase of heating temperature, the peak stress and elasticity modulus decreases, while the peak strain grows rapidly. HSC shows greater brittleness and worse fire-resistant performance than NSC, and destroys suddenly. The research and evaluation on the fire-resistant performance of HSC should be strengthened during the structural design and construction on the HSC buildings.

scholarly journals GEOMETRY AND MECHANICAL PROPERTIES OF A 3D-PRINTED TITANIUM MICROSTRUCTURE

2018 ◽  
Vol 15 ◽  
pp. 104-108
Author(s):  
Luboš Řehounek ◽  
Petra Hájková ◽  
Petr Vakrčka ◽  
Aleš Jíra
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Uniaxial Compression ◽  
Elastic Moduli ◽  
Weight Ratio ◽  
Porous Structures ◽  
Compression Tests ◽  
Local Material ◽  
3D Printed ◽  
Titanium Microstructure

Construction applications sometimes require use of a material other than construction steel or concrete – mainly in cases, where strength to weight ratio needs to be considered. A suitable solution to this problem are structures manufactured using the 3D printing process, as they have a very good strength to weight ratio (i.e.: Ti-6Al-4V – σ<sub>ult</sub> = 900 MPa and ρ = 4500 kg/m<sup>3</sup>). Trabecular structures are porous structures with local material characteristics identical to their commonly manufactured counterparts, but due to their geometry, they have different global mechanical properties and are suited for special applications. We designed and manufactured six variants of these structures and subjected them to uniaxial compression tests, nanoindentation tests and subsequently evaluated their differences and elastic moduli. The values of global moduli E are in the range of 2.55 GPa – 3.55 GPa for all specimens.

scholarly journals The Effect of Bedding Structure on Mechanical Property of Coal

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Zetian Zhang ◽  
Ru Zhang ◽  
Guo Li ◽  
Hegui Li ◽  
Jianfeng Liu
Keyword(s):  
Mechanical Property ◽  
Uniaxial Compression ◽  
Peak Stress ◽  
Natural Fracture ◽  
Test Results ◽  
Compression Tests ◽  
Average Amount ◽  
Uniaxial Compression Strength ◽  
Bedding Planes ◽  
Close Relationship

The mechanical property of coal, influencing mining activity considerably, is significantly determined by the natural fracture distributed within coal mass. In order to study the effecting mechanism of bedding structure on mechanical property of coal, a series of uniaxial compression tests and mesoscopic tests have been conducted. The experimental results show that the distribution characteristic of calcite particles, which significantly influences the growth of cracks and the macroscopic mechanical properties of coal, is obviously affected by the bedding structure. Specifically, the uniaxial compression strength of coal sample is mainly controlled by bedding structure, and the average peak stress of specimens with axes perpendicular to the bedding planes is 20.00 MPa, which is 2.88 times the average amount of parallel ones. The test results also show a close relationship between the bedding structure and the whole deformation process under uniaxial loading.

scholarly journals Study of Acoustic Emission and Mechanical Characteristics of Coal Samples under Different Loading Rates

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Huamin Li ◽  
Huigui Li ◽  
Baobin Gao ◽  
Dongjie Jiang ◽  
Junfa Feng
Keyword(s):  
Acoustic Emission ◽  
Elasticity Modulus ◽  
Loading Rate ◽  
Peak Stress ◽  
Test System ◽  
Strong Impact ◽  
Peak Strain ◽  
Compression Tests ◽  
Loading Rates ◽  
The Relationship

To study the effect of loading rate on mechanical properties and acoustic emission characteristics of coal samples, collected from Sanjiaohe Colliery, the uniaxial compression tests are carried out under various levels of loading rates, including 0.001 mm/s, 0.002 mm/s, and 0.005 mm/s, respectively, using AE-win E1.86 acoustic emission instrument and RMT-150C rock mechanics test system. The results indicate that the loading rate has a strong impact on peak stress and peak strain of coal samples, but the effect of loading rate on elasticity modulus of coal samples is relatively small. When the loading rate increases from 0.001 mm/s to 0.002 mm/s, the peak stress increases from 22.67 MPa to 24.99 MPa, the incremental percentage is 10.23%, and under the same condition the peak strain increases from 0.006191 to 0.007411 and the incremental percentage is 19.71%. Similarly, when the loading rate increases from 0.002 mm/s to 0.005 mm/s, the peak stress increases from 24.99 MPa to 28.01 MPa, the incremental percentage is 12.08%, the peak strain increases from 0.007411 to 0.008203, and the incremental percentage is 10.69%. The relationship between acoustic emission and loading rate presents a positive correlation, and the negative correlation relation has been determined between acoustic emission cumulative counts and loading rate during the rupture process of coal samples.

scholarly journals Rice Husk Shredding as a Means of Increasing the Long-Term Mechanical Properties of Earthen Mixtures for 3D Printing

2022 ◽  
Author(s):  
Elena Ferretti ◽  
Massimo Moretti ◽  
Alberto Chiusoli ◽  
Lapo Naldoni ◽  
Francesco De Fabritiis ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Uniaxial Compression ◽  
Rice Husk ◽  
Brittle Material ◽  
Strict Sense ◽  
Compression Tests ◽  
Vegetable Fiber ◽  
Natural Way

This paper is part of a study of earthen mixtures for 3D printing of buildings. To meet the ever-growing environmental needs, the focus of the paper is on a particular type of biocomposite for the stabilization of earthen mixtures&mdash;the rice husk-lime biocomposite&mdash;and on how to enhance its effect on the long-term mechanical properties of the hardened product. Having assumed that the shredding of the vegetable fiber is precisely one of the possible ways to improve the mechanical properties, we compared the results of uniaxial compression tests performed on cubic specimens made with both shredded and unaltered vegetable fiber, for three curing periods. The results showed that the hardened earthen mixture is not a brittle material in the strict sense, because it exhibits some peculiar behaviors, anomalous for a brittle material. However, being a &ldquo;designable&rdquo; material, its properties can be varied with a certain flexibility to get as close as possible to the desired ones. One of the peculiar properties of the hardened earthen mixture deserves further investigation, rather than corrections. This is the vulcanization that occurs (in a completely natural way) in the long term, thanks to the mineralization of the vegetable fiber by carbonation of the lime.

scholarly journals Experimental and Numerical Investigation of Failure Characteristics and Mechanism of Granites with Different Joint Angles

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Zhenhua Wang ◽  
Jun Fang ◽  
Gang Wang ◽  
Yifan Jiang ◽  
Dongwei Li
Keyword(s):  
Elastic Modulus ◽  
Uniaxial Compression ◽  
Elastic Strain Energy ◽  
Peak Stress ◽  
Peak Strength ◽  
Particle Flow Code ◽  
Dissipated Energy ◽  
Shear Cracks ◽  
Compression Tests ◽  
Dip Angle

The uniaxial compression tests were conducted on granite samples with different joint dip angles to more favorably explore the influences of the nonconsecutive joint on mechanical properties and deformation characteristics of the rock mass. The stress-strain curves, deformation and strength characteristics, and energy evolution process of the samples were analyzed. Numerical simulation using particle flow code (PFC) is employed to study the crack propagation process. The mode of jointed and fractured rock was investigated. The research results showed a significant reduction in both the peak strength and elastic modulus of jointed samples compared with intact ones: the peak strength and elastic modulus drop to the minimum at the joint dip angle of about 45°, especially for the peak strength, which takes up about 55% of the intact samples. The fractured samples’ total energy, elastic strain energy, and dissipated energy during the uniaxial compression drop significantly relative to intact samples. The proportion of the fracture modes varies with different joint dip angles, in which the ratio of shear cracks grows at first and then declines, with the highest balance at the dip angle of 45°. The damage stress’s sensitivity to the dip angle change is greater than that of the peak stress, with reduction amplitude more extensive than the latter.

scholarly journals Water-glass Module on Mechanical Properties of Geopolymer Recycled Aggregate Concrete

2022 ◽  
Vol 2148 (1) ◽  
pp. 012060
Author(s):  
Zhaoyang Ding ◽  
Qun Su ◽  
Hongguan Bian ◽  
Qing Wang ◽  
Jinghai Zhou
Keyword(s):  
Mechanical Properties ◽  
Water Glass ◽  
Elasticity Modulus ◽  
Peak Stress ◽  
Hydration Product ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
National Standard ◽  
Peak Strain ◽  
Aggregate Concrete

Abstract Geopolymer recycled aggregate concrete (GRAC) was prepared by replacing cement with geopolymer and natural aggregate with wast concrete. The effect of water-glass modules on mechanical properties of GRAC was studied. It was found that there are tow kind of binding structures in geopolymer hydration product: C-A-S-H and N-A-S-H, they both contribute to the strength of GRAC. The value of size conversion coefficient of current national standard is inapplicable for GRAC, the calculation method of which is given in this paper. Elasticity modulus and peak stress of GRAC is proportional to water-glass modulus, and peak strain is inversely proportional and its constitutive equation was established.

scholarly journals Dual role of microcracks: toughening and degradation

2001 ◽  
Vol 38 (2) ◽  
pp. 427-440 ◽  
Author(s):  
G M Nagaraja Rao ◽  
C RL Murthy
Keyword(s):  
Mechanical Properties ◽  
Acoustic Emission ◽  
Uniaxial Compression ◽  
Inelastic Strain ◽  
Dual Role ◽  
Compression Tests ◽  
Defective Structure ◽  
Heating And Cooling ◽  
Thermally Treated

One of the methods of improving the mechanical properties of ceramics is to introduce a defective structure that acts as a restraint for the propagation of cracks. In the present study a detailed investigation was carried out by introducing a defective structure in rock to determine if there is any improvement in properties similar to ceramics. Granite was chosen for the investigation, and the microcracks were introduced by a heating and cooling cycle. Uniaxial compression tests have shown that granite thermally treated to 200°C shows the highest strength, and the strength of granite treated to 400°C is comparable to that of unheated granite. Both ultrasonic images and acoustic-emission monitoring show that for thermally treated samples the stress-induced microcrack and macrocrack nucleation and their growth are retarded. The variations in mechanical properties are explained based on the concept of toughening and degradation. Uniaxial compression tests on unheated and thermally treated granite samples have clearly established the dual role of microcracks, which operate in the toughening and degradation mechanisms.Key words: thermal treatment, microcrack, inelastic strain, ultrasonic C-scan imaging, acoustic emission, toughening.

scholarly journals Experimental Study on the Influence of Freezing Pressure on the Uniaxial Mechanical Properties of Ice

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Baosheng Wang ◽  
Weihao Yang ◽  
Peixin Sun ◽  
Xin Huang ◽  
Yaodan Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Residual Stress ◽  
Strain Rate ◽  
Uniaxial Compression ◽  
Peak Stress ◽  
Strain Rate Range ◽  
Brittleness Index ◽  
Rate Range ◽  
Minimum Value ◽  
Maximum Minimum

In this study, a test technique that enables continuous control of the sample stress state from freezing to testing is proposed to investigate the influence of freezing pressure on the mechanical properties of ice under uniaxial compression. In this method, the water is frozen into the standard cylindrical ice specimen under high hydraulic pressure in a triaxial pressure chamber, and then, the temperature field and stress field of the ice specimens are adjusted to the initial state of the test; finally, an in situ mechanical test is conducted in the triaxial chamber. The uniaxial compression test of ice specimens with temperature of −20°C and freezing pressure of 0.5–30 MPa is performed in the strain rate range of 5 × 10−5−1.5 × 10−6 s−1. The results show that, as the freezing pressure increases, the ductile-to-brittle transition zone of the ice specimen during failure moves to the low strain rate range, and the failure mode of the specimen changes from shear failure to splitting failure. Further, the brittleness index of the ice specimen first increases, then decreases, and then again increases with the increase in freezing pressure. The brittleness index reaches the maximum (minimum) when the freezing pressure is 30 MPa (20 MPa). The peak stress of the ice specimen also increases first, then decreases, and then increases with the increase in freezing pressure. The maximum value is also at the freezing pressure of 30 MPa, but the minimum value is obtained at the freezing pressure of 0.5 MPa. The failure strain of the ice specimen first decreases and then increases with the increase in freezing pressure, and the maximum (minimum) value is achieved at the freezing pressure of 0.5 MPa (10 MPa). When the ice specimen exhibits brittle failure, the relationships between the residual stress and the freezing pressure and between the peak stress and freezing pressure are the same, but when the ice specimen exhibits ductile failure, there is no obvious relationship between the residual stress and the freezing pressure.

Sign in / Sign up

Export Citation Format

Share Document