scholarly journals Design and Testing of an Experimental Steam-Induced Burn Model in Rats

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Vlad Porumb ◽  
Alexandru Florentin Trandabăț ◽  
Cristina Terinte ◽  
Irina Draga Căruntu ◽  
Elena Porumb-Andrese ◽  
...  
Keyword(s):  
Automated System ◽  
Level Of Automation ◽  
Exposure Temperature ◽  
Degree Burn ◽  
Computer Controlled ◽  
The Difference ◽  
High Level ◽  
New Treatments ◽  
Experimental Burns ◽  
Second Degree

Background. Most of the current models for experimental burns pose difficulties in ensuring consistency and standardization.Aim of Study. We aimed to develop an automated, reproducible technique for experimental burns using steam-based heat transfer.Methods. The system developed for steam exposure was based on a novel, integrated, computer-controlled design. Three groups of rats were exposed to steam for 1, 3, and 7 seconds. The lesions were evaluated after 20 minutes, 48 hours, and 72 hours after burn induction.Results. One-second steam application produced a superficial second-degree burn; three-second application induced deep second-degree burn; and seven-second application led to a third-degree burn.Conclusion. The high level of automation of our integrated, computer-controlled system makes the difference between our system and other models, by ensuring the control of the duration of exposure, temperature, and pressure and eliminating as many potential human generated errors as possible. The automated system can accurately reproduce specific types of burns, according to histological assessment. This model could generate the reproducible data needed in the study of burn pathology and in order to assess new treatments.

scholarly journals Polyelectrolyte Complexes of Ciprofloxacin and Lidocaine Improve Wound Healing in Deep Second Degree Burns and Reduce in Vitro Ciprofloxacin Cytotoxicity in Fibroblasts

2022 ◽  
Author(s):  
María Florencia Sanchez ◽  
María Laura Guzman ◽  
Jesica Flores-Martín ◽  
Mariano Cruz Del Puerto ◽  
Carlos Laino ◽  
...  
Keyword(s):  
Superior Performance ◽  
Polyelectrolyte Complexes ◽  
Smart System ◽  
Smart Systems ◽  
Degree Burn ◽  
Ionic Complexation ◽  
New Treatments ◽  
Improve Wound Healing ◽  
Second Degree

Abstract The development of new treatments capable of controlling infections and pain related to burns continues to be a challenge. Antimicrobials are necessary tools, but these can be cytotoxic for regenerating cells.In this study, antibiotic-anesthetic smart systems obtained by ionic complexation of polyelectrolytes with ciprofloxacin and lidocaine were obtained as film and hydrogel. The complexation of ciprofloxacin with natural polyelectrolytes efficiently contributed to increasing biocompatibility in a primary culture of isolated fibroblasts. In addition, the relative levels of the proteins integrin β1 and p-FAK involved in cell migration were increased with no modifications in cell mobility. Their evaluation in a deep second-degree burn model revealed fast reepithelization, with appendage conservation and complete dermis organization. Encouragingly, we found that both the film and the hydrogel showed a significantly superior performance compared to the reference treatment of silver sulfadiazine cream. This work highlights the great potential of this smart system as an attractive dressing for burns, which surpasses currently available treatments.

Manufacturing Plant for 1985—Developments and Justification

1982 ◽  
Vol 196 (1) ◽  
pp. 265-280 ◽  
Author(s):  
P J Sackett ◽  
K Rathmill
Keyword(s):  
Manufacturing System ◽  
Computer Modelling ◽  
Investment Decision ◽  
Level Of Automation ◽  
Investment Appraisal ◽  
Effective Operation ◽  
Computer Controlled ◽  
Manufacturing Techniques ◽  
High Level ◽  
Selection Of

Changes in manufacturing techniques and systems are out-dating traditional ways of assessing the selection of new plant. The engineer needs to consider the overall effect of the introduction of new equipment when making an investment appraisal. The paper reviews trends in manufacture with special reference to computer controlled batch manufacturing equipment and systems with a high level of automation. Methods of assessing these are discussed in detail including the use of computer modelling in arriving at an investment decision which considers the effective operation of the manufacturing system as a whole.

Difference of [Ca2+]i Movements in Platelets Stimulated by Thrombin and TRAP: the Involvement of αIIbβ3-Mediated TXA2 Synthesis

1998 ◽  
Vol 79 (06) ◽  
pp. 1184-1190 ◽  
Author(s):  
Yoshiaki Tomiyama ◽  
Shigenori Honda ◽  
Kayoko Senzaki ◽  
Akito Tanaka ◽  
Mitsuru Okubo ◽  
...  
Keyword(s):  
Platelet Aggregation ◽  
Fibrinogen Binding ◽  
Adp Release ◽  
The Difference ◽  
Txa2 Receptor Antagonist ◽  
High Level ◽  
Inhibition Studies ◽  
Peak Increase ◽  
Second Peak ◽  
Assay Conditions

SummaryThis study investigated the difference of [Ca2+]i movement in platelets in response to thrombin and TRAP. The involvement of αIIbβ3 in this signaling was also studied. Stimulation of platelets with thrombin at 0.03 U/ml caused platelet aggregation and a two-peak increase in [Ca2+]i. The second peak of [Ca2+]i, but not the first peak was abolished by the inhibition of platelet aggregation with αIIbβ3 antagonists or by scavenging endogenous ADP with apyrase. A cyclooxygenase inhibitor, aspirin, and a TXA2 receptor antagonist, BM13505, also abolished the second peak of [Ca2+]i but not the first peak, although these regents did not inhibit aggregation. Under the same assay conditions, measurement of TXB2 demonstrated that αIIbβ3 antagonists and aspirin almost completely inhibited the production of TXB2. In contrast to thrombin-stimulation, TRAP caused only a single peak of [Ca2+]i even in the presence of platelet aggregation, and a high level of [Ca2+]i increase was needed for the induction of platelet aggregation. The inhibition of aggregation with αIIbβ3 antagonists had no effect on [Ca2+]i change and TXB2 production induced by TRAP. Inhibition studies using anti-GPIb antibodies suggested that GPIb may be involved in the thrombin response, but not in the TRAP. Our findings suggest that low dose thrombin causes a different [Ca2+]i response and TXA2 producing signal from TRAP. Endogenous ADP release and fibrinogen binding to αIIbβ3 are responsible for the synthesis of TXA2 which results in the induction of the second peak of [Ca2+]i in low thrombin- but not TRAP-stimulated platelets.

Rational Choice of Information Form Converters for Automated Systems in Construction

2020 ◽  
pp. 60-65
Keyword(s):  
Rational Choice ◽  
Construction Industry ◽  
Correct Choice ◽  
Automated System ◽  
Digital Code ◽  
Automated Control ◽  
Sigma Delta ◽  
Processor Core ◽  
Building Monitoring ◽  
High Level

In automated control systems for technical processes, the conversion of a continuous signal into a digital code and vice versa from a digital code to a continuous (analog) value is widely used. For direct type converters often used the term ADC, the reverse - DAC. The characteristics of the converters often dramatically affect the parameters of the entire automated system. The importance of the correct choice of ADCs and DACs has especially increased recently in connection with the mass introduction of microcontrollers MC. Indeed, in addition to the ADC and DAC, it is necessary to place the processor core in the microcontroller's crystal, I/O interfaces and many other elements necessary for the functioning of the MC. The use of information converters in the construction industry imposes additional requirements on converters: for example, in building monitoring systems, precision ADCs with extremely high accuracy are often required (while performance may be low), in other applications it is necessary to provide the necessary parameters at a high level of industrial interference, etc. This article explores issues related to the rational choice of ADCs and DACs, taking into account current trends in the IT field and the specifics of work in the construction industry. Sigma-Delta converters are noted as the most promising models of direct type converters.

ATTITUDE TO OPEN ACCESS IN RUSSIAN SCHOLARLY COMMUNITY: 2018. SURVEY RESULTS AND ANALYSIS

2018 ◽  
Vol 1 (1) ◽  
pp. 6-21 ◽  
Author(s):  
I. K. Razumova ◽  
N. N. Litvinova ◽  
M. E. Shvartsman ◽  
A. Yu. Kuznetsov
Keyword(s):  
Open Access ◽  
Open Access Publishing ◽  
Scholarly Community ◽  
Research Areas ◽  
Survey Results ◽  
The Difference ◽  
Policies And Programs ◽  
The Uk ◽  
High Level ◽  
Access Policies

Introduction. The paper presents survey results on the awareness towards and practice of Open Access scholarly publishing among Russian academics.Materials and Methods. We employed methods of statistical analysis of survey results. Materials comprise results of data processing of Russian survey conducted in 2018 and published results of the latest international surveys. The survey comprised 1383 respondents from 182 organizations. We performed comparative studies of the responses from academics and research institutions as well as different research areas. The study compares results obtained in Russia with the recently published results of surveys conducted in the United Kingdom and Europe.Results. Our findings show that 95% of Russian respondents support open access, 94% agree to post their publications in open repositories and 75% have experience in open access publishing. We did not find any difference in the awareness and attitude towards open access among seven reference groups. Our analysis revealed the difference in the structure of open access publications of the authors from universities and research institutes. Discussion andConclusions. Results reveal a high level of awareness and support to open access and succeful practice in the open access publications in the Russian scholarly community. The results for Russia demonstrate close similarity with the results of the UK academics. The governmental open access policies and programs would foster the practical realization of the open access in Russia.

Quantitative indicators of air traffic controllers’ attitude to the danger of errors

2020 ◽  
pp. 68-78
Author(s):  
O. M. Reva ◽  
V. V. Kamyshin ◽  
S. P. Borsuk ◽  
V. A. Shulhin ◽  
A. V. Nevynitsyn
Keyword(s):  
Human Factor ◽  
Differential Method ◽  
Air Traffic ◽  
Professional Activity ◽  
Aviation Accidents ◽  
Air Traffic Controllers ◽  
The Difference ◽  
Level Of Significance ◽  
The Individual ◽  
High Level

The negative and persistent impact of the human factor on the statistics of aviation accidents and serious incidents makes proactive studies of the attitude of “front line” aviation operators (air traffic controllers, flight crewmembers) to dangerous actions or professional conditions as a key component of the current paradigm of ICAO safety concept. This “attitude” is determined through the indicators of the influence of the human factor on decision-making, which also include the systems of preferences of air traffic controllers on the indicators and characteristics of professional activity, illustrating both the individual perception of potential risks and dangers, and the peculiarities of generalized group thinking that have developed in a particular society. Preference systems are an ordered (ranked) series of n = 21 errors: from the most dangerous to the least dangerous and characterize only the danger preference of one error over another. The degree of this preference is determined only by the difference in the ranks of the errors and does not answer the question of how much time one error is more dangerous in relation to another. The differential method for identifying the comparative danger of errors, as well as the multistep technology for identifying and filtering out marginal opinions were applied. From the initial sample of m = 37 professional air traffic controllers, two subgroups mB=20 and mG=7 people were identified with statisti-cally significant at a high level of significance within the group consistency of opinions a = 1%. Nonpara-metric optimization of the corresponding group preference systems resulted in Kemeny’s medians, in which the related (middle) ranks were missing. Based on these medians, weighted coefficients of error hazards were determined by the mathematical prioritization method. It is substantiated that with the ac-cepted accuracy of calculations, the results obtained at the second iteration of this method are more ac-ceptable. The values of the error hazard coefficients, together with their ranks established in the preference systems, allow a more complete quantitative and qualitative analysis of the attitude of both individual air traffic controllers and their professional groups to hazardous actions or conditions.

Exploring The Effect of Visual Information Degradation on Human Perception and Performance In A Human-Telerobot System

2020 ◽  
Vol 64 (1) ◽  
pp. 1302-1307
Author(s):  
Richard Stone ◽  
Minglu Wang ◽  
Thomas Schnieders ◽  
Esraa Abdelall
Keyword(s):  
Visual Information ◽  
Human Perception ◽  
Low Level ◽  
Hit Rate ◽  
Word Level ◽  
Level Of Automation ◽  
Significant Difference ◽  
Human Operators ◽  
And Performance ◽  
High Level

Human-robotic interaction system are increasingly becoming integrated into industrial, commercial and emergency service agencies. It is critical that human operators understand and trust automation when these systems support and even make important decisions. The following study focused on human-in-loop telerobotic system performing a reconnaissance operation. Twenty-four subjects were divided into groups based on level of automation (Low-Level Automation (LLA), and High-Level Automation (HLA)). Results indicated a significant difference between low and high word level of control in hit rate when permanent error occurred. In the LLA group, the type of error had a significant effect on the hit rate. In general, the high level of automation was better than the low level of automation, especially if it was more reliable, suggesting that subjects in the HLA group could rely on the automatic implementation to perform the task more effectively and more accurately.

scholarly journals A Modified KNN Algorithm for High-Performance Computing on FPGA of Real-Time m-QAM Demodulators

Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 627
Author(s):  
David Marquez-Viloria ◽  
Luis Castano-Londono ◽  
Neil Guerrero-Gonzalez
Keyword(s):  
Real Time ◽  
High Performance ◽  
Interference Mitigation ◽  
Parallel Implementation ◽  
Computational Time ◽  
Successful Implementation ◽  
Interchannel Interference ◽  
The Difference ◽  
High Level ◽  
Performance Computing

A methodology for scalable and concurrent real-time implementation of highly recurrent algorithms is presented and experimentally validated using the AWS-FPGA. This paper presents a parallel implementation of a KNN algorithm focused on the m-QAM demodulators using high-level synthesis for fast prototyping, parameterization, and scalability of the design. The proposed design shows the successful implementation of the KNN algorithm for interchannel interference mitigation in a 3 × 16 Gbaud 16-QAM Nyquist WDM system. Additionally, we present a modified version of the KNN algorithm in which comparisons among data symbols are reduced by identifying the closest neighbor using the rule of the 8-connected clusters used for image processing. Real-time implementation of the modified KNN on a Xilinx Virtex UltraScale+ VU9P AWS-FPGA board was compared with the results obtained in previous work using the same data from the same experimental setup but offline DSP using Matlab. The results show that the difference is negligible below FEC limit. Additionally, the modified KNN shows a reduction of operations from 43 percent to 75 percent, depending on the symbol’s position in the constellation, achieving a reduction 47.25% reduction in total computational time for 100 K input symbols processed on 20 parallel cores compared to the KNN algorithm.

scholarly journals Investigating the Impact of Collagen-Chitosan Derived from Scomberomorus Guttatus and Shrimp Skin on Second-Degree Burn in Rats Model

2021 ◽  
Vol 18 ◽  
pp. 12-20
Author(s):  
Mohammad Javad Fatemi ◽  
Soheila Naderi Garahgheshlagh ◽  
Tayyeb Ghadimi ◽  
Shahla Jamili ◽  
Mohammad Reza Nourani ◽  
...  
Keyword(s):  
Degree Burn ◽  
The Impact ◽  
Second Degree

scholarly journals E-learning-Oriented Software Architecture Design and Case Study

2015 ◽  
Vol 10 (4) ◽  
pp. 59
Author(s):  
Peng Lu ◽  
Xiao Cong ◽  
Dongdai Zhou
Keyword(s):  
Software Architecture ◽  
Building Blocks ◽  
Domain Model ◽  
Learning System ◽  
Application Framework ◽  
Component Library ◽  
E Learning ◽  
The Difference ◽  
High Level

Nowadays, E-learning system has been widely applied to practical teaching. It was favored by people for its characterized course arrangement and flexible learning schedule. However, the system does have some problems in the process of application such as the functions of single software are not diversified enough to satisfy the requirements in teaching completely. In order to cater more applications in the teaching process, it is necessary to integrate functions from different systems. But the difference in developing techniques and the inflexibility in design makes it difficult to implement. The major reason of these problems is the lack of fine software architecture. In this article, we build domain model and component model of E-learning system and components integration method on the basis of WebService. And we proposed an abstract framework of E-learning which could express the semantic relationship among components and realize high level reusable on the basis of informationized teaching mode. On this foundation, we form an E-learning oriented layering software architecture contain component library layer, application framework layer and application layer. Moreover, the system contains layer division multiplexing and was not built upon developing language and tools. Under the help of the software architecture, we could build characterized E-learning system flexibly like building blocks through framework selection, component assembling and replacement. In addition, we exemplify how to build concrete E-learning system on the basis of this software architecture.

Sign in / Sign up

Export Citation Format

Share Document