scholarly journals Optimal Design of Viscoelastic Dampers in Frame Structures considering Soil-Structure Interaction Effect

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Xuefei Zhao ◽  
Shuguang Wang ◽  
Dongsheng Du ◽  
Weiqing Liu

The seismic response control of multistory frame structures using optimally placed viscoelastic dampers (VEDs) within consideration of soil-structure interaction (SSI) effect is investigated in this paper. The system is assumed to be elastic and responses of the system are obtained in frequency domain for stationary random seismic excitations. The optimal designs of VEDs in structures are achieved through genetic algorithm (GA) by minimizing the maximum response quantities of the system for a determined total amount of viscoelastic material. Two typical elastic multistory frame structures with different soil types and foundation embedment ratios are considered to demonstrate the optimization process. It is shown that the VEDs have the best control of the structural response for fixed base condition and the control efficiency decreases as the soil becomes softer. The optimal placement types of VEDs for different soil types differ from each other. With the decrease of soil stiffness, the optimal locations of VEDs have a tendency to shift to top floors.

2020 ◽  
Vol 8 ◽  
pp. 22-29
Author(s):  
Nasala Dongol ◽  
Prachand Man Pradhan ◽  
Suman Manandhar

This study states that the effects of soil structure interaction on the Reinforced Concrete (RC) framed structures is directly influenced by the soil properties of the site. Here, one preexisting structure is taken for the study. The building is a hospital building with two underground basements. Taking into account the actual soil condition of building site, this study provides idea on the soil structure interaction on the structure The properties of springs are calculated from different standard penetration test (SPT) values, Poisson’s ratio and elasticity of soil along the depth of the soil. Entire soil-foundation-structure system is modelled and analyzed using spring approach. Static analysis, response spectrum analysis and pushover analysis (PA) are done in order to find the variations in natural periods, base shears and deflections of the structures by incorporating soil flexibility as compared to structures with conventional fixed base. Pushover analysis is done to evaluate the performance of the structure when modelled in fixed base and spring base system.


2020 ◽  
Vol 10 (23) ◽  
pp. 8357
Author(s):  
Ibrahim Oz ◽  
Sevket Murat Senel ◽  
Mehmet Palanci ◽  
Ali Kalkan

Reconnaissance studies performed after destructive earthquakes have shown that seismic performance of existing buildings, especially constructed on weak soils, is significantly low. This situation implies the negative effects of soil-structure interaction on the seismic performance of buildings. In order to investigate these effects, 40 existing buildings from Turkey were selected and nonlinear models were constructed by considering fixed-base and stiff, moderate and soft soil conditions. Buildings designed before and after Turkish Earthquake code of 1998 were grouped as old and new buildings, respectively. Different soil conditions classified according to shear wave velocities were reflected by using substructure method. Inelastic deformation demands were obtained by using nonlinear time history analysis and 20 real acceleration records selected from major earthquakes were used. The results have shown that soil-structure interaction, especially in soft soil cases, significantly affects the seismic response of old buildings. The most significant increase in drift demands occurred in first stories and the results corresponding to fixed-base, stiff and moderate cases are closer to each other with respect to soft soil cases. Distribution of results has indicated that effect of soil-structure interaction on the seismic performance of new buildings is limited with respect to old buildings.


2017 ◽  
Vol 20 (11) ◽  
pp. 1712-1726
Author(s):  
Farhad Behnamfar ◽  
Seyyed Mohammad Mirhosseini ◽  
Hossein Alibabaei

A common assumption when analyzing a structure for earthquake forces is that the building is positively attached to a rigid ground so that it can sustain possible tensile forces without being detached, or uplifted, from its bearing points. Considering the facts that almost no tension can be transferred between a surface foundation and soil and soft soils interact with the supported structure during earthquakes, in this research, the effects of uplift and soil–structure interaction on nonlinear seismic response of structures are evaluated. Several reinforced concrete and steel structures under different suits of consistent ground motions are considered. The base of the buildings is modeled with vertical no-tension springs being nonlinear in compression. The total soil–structure interaction system is modeled within OpenSees, and the seismic behavior is evaluated using a nonlinear dynamic analysis. The nonlinear responses of buildings are determined and compared between three cases: fixed base, flexible base without uplift, and flexible base with uplift. The cases for which uplift in conjunction with soil–structure interaction should be considered are identified.


Sign in / Sign up

Export Citation Format

Share Document