scholarly journals TLS-Based Feature Extraction and 3D Modeling for Arch Structures

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Xiangyang Xu ◽  
Xin Zhao ◽  
Hao Yang ◽  
Ingo Neumann
Keyword(s):  
3D Modeling ◽  
Laser Scanning ◽  
High Efficiency ◽  
Data Extraction ◽  
Point Clouds ◽  
Deformation Monitoring ◽  
Deformation Analysis ◽  
Unknown Parameters ◽  
Automatic Data ◽  
B Spline

Terrestrial laser scanning (TLS) technology is one of the most efficient and accurate tools for 3D measurement which can reveal surface-based characteristics of objects with the aid of computer vision and programming. Thus, it plays an increasingly important role in deformation monitoring and analysis. Automatic data extraction and high efficiency and accuracy modeling from scattered point clouds are challenging issues during the TLS data processing. This paper presents a data extraction method considering the partial and statistical distribution of the point clouds scanned, called the window-neighborhood method. Based on the point clouds extracted, 3D modeling of the boundary of an arched structure was carried out. The ideal modeling strategy should be fast, accurate, and less complex regarding its application to large amounts of data. The paper discusses the accuracy of fittings in four cases between whole curve, segmentation, polynomial, and B-spline. A similar number of parameters was set for polynomial and B-spline because the number of unknown parameters is essential for the accuracy of the fittings. The uncertainties of the scanned raw point clouds and the modeling are discussed. This process is considered a prerequisite step for 3D deformation analysis with TLS.

scholarly journals Laser Scanner–Based Deformation Analysis Using Approximating B-Spline Surfaces

2021 ◽  
Vol 13 (18) ◽  
pp. 3551
Author(s):  
Corinna Harmening ◽  
Christoph Hobmaier ◽  
Hans Neuner
Keyword(s):  
Rigid Body ◽  
Laser Scanning ◽  
Body Movement ◽  
Control Point ◽  
Measurement Techniques ◽  
Point Clouds ◽  
Deformation Analysis ◽  
Body Movements ◽  
B Spline ◽  
Spline Surfaces

Due to the increased use of areal measurement techniques, such as laser scanning in geodetic monitoring tasks, areal analysis strategies have considerably gained in importance over the last decade. Although a variety of approaches that quasi-continuously model deformations are already proposed in the literature, there are still a multitude of challenges to solve. One of the major interests of engineering geodesy within monitoring tasks is the detection of absolute distortions with respect to a stable reference frame. Determining distortions and simultaneously establishing the joint geodetic datum can be realised by modelling the differences between point clouds acquired in different measuring epochs by means of a rigid body movement that is superimposed by distortions. In a previous study, we discussed the possibility of estimating these rigid body movements from the control points of B-spline surfaces approximating the acquired point clouds. Alternatively, we focus on estimating them by means of constructed points on B-spline surfaces in this study. This strategy has the advantage of larger redundancy compared to the control point–based strategy. Furthermore, the strategy introduced allows for the detection of rigid body movements between point clouds of different epochs and for the simultaneous localisation of areas in which the rigid body movement is superimposed by distortions. The developed approach is based on B-spline models of epoch-wise acquired point clouds, the surface parameters of which define point correspondences on different B-spline surfaces. Using these point correspondences, a RANSAC-approach is used to robustly estimate the parameters of the rigid body movement. The resulting consensus set initially defines the non-distorted areas of the object under investigation, which are extended and statistically verified in a second step. The developed approach is applied to simulated data sets, revealing that distorted areas can be reliably detected and that the parameters of the rigid body movement can be precisely and accurately determined by means of the strategy.

Laser Scanning Based Growth Analysis of Plants as a New Challenge for Deformation Monitoring

2016 ◽  
Vol 10 (1) ◽  
Author(s):  
Jan Dupuis ◽  
Christoph Holst ◽  
Heiner Kuhlmann
Keyword(s):  
Leaf Area ◽  
High Precision ◽  
Laser Scanning ◽  
Leaf Surface ◽  
Leaf Growth ◽  
Spline Approximation ◽  
Point Clouds ◽  
Deformation Monitoring ◽  
Deformation Analysis ◽  
Absolute Size

AbstractNowadays, the areal deformation analysis has become an important task in engineering geodesy. Thereby, not only manmade objects are of high interest, also natural objects, like plant organs, are focused more frequently. Thus, the analysis of leaf growth, i. e. the spatial development of the leaf surface, can be seen as a problem of deformation monitoring. In contrast to classical geodetic tasks, the absolute size of the deformation of the leaf surface is small, but usually great compared to the object size. Due to the optical characteristics of leaf surfaces, the point clouds, commonly acquired with high precision close-up laser scanners, provide a point-to-point distance that is small or equal compared to the measurement accuracy. Thus, the point clouds are usually processed and the leaf area is derived from a triangulation-based surface representation (mesh), resulting in a significant uncertainty of area calculation. In this paper, we illustrate the lacks of the mesh-based leaf area calculation. Using high precision gauge blocks as well as a number of tomato leaves, uncertainties of the area derivation are revealed and evaluated. The application of a B-spline approximation illustrates the advantages of an approximation-based approach and introduces the prospect for further research.

scholarly journals A New Approach for Cylindrical Steel Structure Deformation Monitoring by Dense Point Clouds

2021 ◽  
Vol 13 (12) ◽  
pp. 2263
Author(s):  
Dongfeng Jia ◽  
Weiping Zhang ◽  
Yuhao Wang ◽  
Yanping Liu
Keyword(s):  
Steel Structure ◽  
Steel Structures ◽  
Point Clouds ◽  
Deformation Monitoring ◽  
Deformation Analysis ◽  
Relative Deformation ◽  
Structure Deformation ◽  
Single Time ◽  
Cylindrical Steel ◽  
Cylinder Fitting

As fundamental load-bearing parts, the cylindrical steel structures of transmission towers relate to the stability of the main structures in terms of topological relation and performance. Therefore, the periodic monitoring of a cylindrical steel structure is necessary to maintain the safety and stability of existing structures in energy transmission. Most studies on deformation analysis are still focused on the process of identifying discrepancies in the state of a structure by observing it at different times, yet relative deformation analysis based on the data acquired in single time has not been investigated effectively. In this study, the piecewise cylinder fitting method is presented to fit the point clouds collected at a single time to compute the relative inclination of a cylindrical steel structure. The standard deviation is adopted as a measure to evaluate the degree of structure deformation. Meanwhile, the inclination rate of each section is compared with the conventional method on the basis of the piecewise cylinder fitting parameters. The validity and accuracy of the algorithm are verified by real transmission tower point cloud data. Experimental results show that the piecewise cylinder fitting algorithm proposed in this research can meet the accuracy requirements of cylindrical steel structure deformation analysis and has high application value in the field of structure deformation monitoring.

scholarly journals Highway alignments extraction and 3D modeling from airborne laser scanning point clouds

2021 ◽  
Vol 102 ◽  
pp. 102429
Author(s):  
Yuzhou Zhou ◽  
Ronggang Huang ◽  
Tengping Jiang ◽  
Zhen Dong ◽  
Bisheng Yang
Keyword(s):  
3D Modeling ◽  
Laser Scanning ◽  
Point Clouds ◽  
Airborne Laser Scanning ◽  
Airborne Laser

scholarly journals CHANGE DETECTION AND DEFORMATION ANALYSIS BASED ON MOBILE LASER SCANNING DATA OF URBAN AREAS

2020 ◽  
Vol V-2-2020 ◽  
pp. 703-710
Author(s):  
J. Gehrung ◽  
M. Hebel ◽  
M. Arens ◽  
U. Stilla
Keyword(s):  
Change Detection ◽  
Urban Areas ◽  
Laser Scanning ◽  
State Of The Art ◽  
Point Clouds ◽  
Deformation Analysis ◽  
Lidar Data ◽  
Efficient Manner ◽  
Incomplete Observations ◽  
Novel Method

Abstract. Change detection is an important tool for processing multiple epochs of mobile LiDAR data in an efficient manner, since it allows to cope with an otherwise time-consuming operation by focusing on regions of interest. State-of-the-art approaches usually either do not handle the case of incomplete observations or are computationally expensive. We present a novel method based on a combination of point clouds and voxels that is able to handle said case, thereby being computationally less expensive than comparable approaches. Furthermore, our method is able to identify special classes of changes such as partially moved, fully moved and deformed objects in addition to the appeared and disappeared objects recognized by conventional approaches. The performance of our method is evaluated using the publicly available TUM City Campus datasets, showing an overall accuracy of 88 %.

scholarly journals Integrating UAV and TLS Approaches for Environmental Management: A Case Study of a Waste Stockpile Area

2020 ◽  
Vol 12 (10) ◽  
pp. 1615 ◽  
Author(s):  
Seung Woo Son ◽  
Dong Woo Kim ◽  
Woong Gi Sung ◽  
Jae Jin Yu
Keyword(s):  
Environmental Management ◽  
Point Cloud ◽  
Laser Scanning ◽  
High Efficiency ◽  
Point Clouds ◽  
Fusion Model ◽  
Spatial Features ◽  
Computation Efficiency ◽  
Volume Computation ◽  
Mean Square Errors

A methodology for optimal volume computation for the environmental management of waste stockpiles was derived by integrating the terrestrial laser scanning (TLS) and unmanned aerial vehicle (UAV) technologies. Among the UAV-based point clouds generated under various flight scenarios, the most accurate point cloud was selected for analysis. The root mean square errors (RMSEs) of the TLS- and UAV-based methods were 0.202 and 0.032 m, respectively, and the volume computation yielded 41,226 and 41,526 m3, respectively. Both techniques showed high accuracy but also exhibited drawbacks in terms of their spatial features and efficiency. The TLS and UAV methods required 800 and 340 min, respectively, demonstrating the high efficiency of the UAV method. The RMSE and volume obtained using the TLS/UAV fusion model were calculated as 0.030 m and 41,232 m3, respectively. The UAV approach generally yielded high point cloud accuracy and volume computation efficiency.

scholarly journals Deformation Monitoring of Earth Fissure Hazards Using Terrestrial Laser Scanning

Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1463 ◽  
Author(s):  
Yunfeng Ge ◽  
Huiming Tang ◽  
Xulong Gong ◽  
Binbin Zhao ◽  
Yi Lu ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Ground Surface ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Vertical Displacement ◽  
Deformation Monitoring ◽  
Earth Fissure ◽  
Displacement Analysis ◽  
Remote Sensing Technique ◽  
Noise Data

Deformation monitoring is a powerful tool to understand the formation mechanism of earth fissure hazards, enabling the engineering and planning efforts to be more effective. To assess the evolution characteristics of the Yangshuli earth fissure hazard more completely, terrestrial laser scanning (TLS), a remote sensing technique which is regarded as one of the most promising surveying technologies in geohazard monitoring, was employed to detect the changes to ground surfaces and buildings in small- and large-scales, respectively. Time-series of high-density point clouds were collected through 5 sequential scans from 2014 to 2017 and then pre-processing was performed to filter the noise data of point clouds. A tiny deformation was observed on both the scarp and the walls, based on the local displacement analysis. The relative height differences between the two sides of the scarp increase slowly from 0.169 m to 0.178 m, while no obvious inclining (the maximum tilt reaches just to 0.0023) happens on the two walls, based on tilt measurement. Meanwhile, global displacement analysis indicates that the overall settlement slowly increases for the ground surface, but the regions in the left side of scarp are characterized by a relatively larger vertical displacement than the right. Furthermore, the comparisons of monitoring results on the same measuring line are discussed in this study and TLS monitoring results have an acceptable consistency with the global positioning system (GPS) measurements. The case study shows that the TLS technique can provide an adequate solution in deformation monitoring of earth fissure hazards, with high effectiveness and applicability.

scholarly journals Spatial Data Analysis for Deformation Monitoring of Bridge Structures

2020 ◽  
Vol 10 (23) ◽  
pp. 8731
Author(s):  
Ján Erdélyi ◽  
Alojz Kopáčik ◽  
Peter Kyrinovič
Keyword(s):  
Spatial Data ◽  
Laser Scanning ◽  
Deformation Monitoring ◽  
Radar Interferometry ◽  
Spatial Data Analysis ◽  
Deformation Analysis ◽  
Measuring Instruments ◽  
Engineering Structures ◽  
Essential Information ◽  
Bridge Structures

Weather conditions and different operational loads often cause changes in essential parts of engineering structures, and this affects the static and dynamic behavior and reliability of these structures. Therefore, geodetic monitoring is an integral part of the diagnosis of engineering structures and provides essential information about the current state (condition) of the structure. The development of measuring instruments enables deformation analyses of engineering structures using non-conventional surveying methods. Nowadays, one of the most effective techniques for spatial data collection is terrestrial laser scanning (TLS). TLS is frequently used for data acquisition in cases where three-dimensional (3D) data with high resolution is needed. Using suitable data processing, TLS can be used for static deformation analysis of the structure being monitored. For dynamic deformation measurements (structural health monitoring) of bridge structures, ground-based radar interferometry and accelerometers are often used for vibration mode determination using spectral analysis of frequencies. This paper describes experimental deformation monitoring of structures performed using TLS and ground-based radar interferometry. The procedure of measurement, the analysis of the acquired spatial data, and the results of deformation monitoring are explained and described.

Choosing the optimal number of B-spline control points (Part 2: Approximation of surfaces and applications)

2017 ◽  
Vol 11 (1) ◽  
Author(s):  
Corinna Harmening ◽  
Hans Neuner
Keyword(s):  
Data Analysis ◽  
Laser Scanner ◽  
Point Clouds ◽  
Optimal Number ◽  
Deformation Analysis ◽  
Control Points ◽  
Trial And Error ◽  
B Spline ◽  
B Splines ◽  
Spline Surfaces

AbstractFreeform surfaces like B-splines have proven to be a suitable tool to model laser scanner point clouds and to form the basis for an areal data analysis, for example an areal deformation analysis.A variety of parameters determine the B-spline's appearance, the B-spline's complexity being mostly determined by the number of control points. Usually, this parameter type is chosen by intuitive trial-and-error-procedures.In [The present paper continues these investigations. If necessary, the methods proposed in [The application of those methods to B-spline surfaces reveals the datum problem of those surfaces, meaning that location and number of control points of two B-splines surfaces are only comparable if they are based on the same parameterization. First investigations to solve this problem are presented.

Robust external calibration of terrestrial laser scanner and digital camera for structural monitoring

2019 ◽  
Vol 13 (2) ◽  
pp. 105-134 ◽  
Author(s):  
Mohammad Omidalizarandi ◽  
Boris Kargoll ◽  
Jens-André Paffenholz ◽  
Ingo Neumann
Keyword(s):  
Em Algorithm ◽  
Laser Scanner ◽  
Digital Camera ◽  
Point Clouds ◽  
Deformation Monitoring ◽  
Deformation Analysis ◽  
Terrestrial Laser Scanner ◽  
External Calibration ◽  
3D Point Clouds ◽  
Calibration Parameters

Abstract In the last two decades, the integration of a terrestrial laser scanner (TLS) and digital photogrammetry, besides other sensors integration, has received considerable attention for deformation monitoring of natural or man-made structures. Typically, a TLS is used for an area-based deformation analysis. A high-resolution digital camera may be attached on top of the TLS to increase the accuracy and completeness of deformation analysis by optimally combining points or line features extracted both from three-dimensional (3D) point clouds and captured images at different epochs of time. For this purpose, the external calibration parameters between the TLS and digital camera needs to be determined precisely. The camera calibration and internal TLS calibration are commonly carried out in advance in the laboratory environments. The focus of this research is to highly accurately and robustly estimate the external calibration parameters between the fused sensors using signalised target points. The observables are the image measurements, the 3D point clouds, and the horizontal angle reading of a TLS. In addition, laser tracker observations are used for the purpose of validation. The functional models are determined based on the space resection in photogrammetry using the collinearity condition equations, the 3D Helmert transformation and the constraint equation, which are solved in a rigorous bundle adjustment procedure. Three different adjustment procedures are developed and implemented: (1) an expectation maximization (EM) algorithm to solve a Gauss-Helmert model (GHM) with grouped t-distributed random deviations, (2) a novel EM algorithm to solve a corresponding quasi-Gauss-Markov model (qGMM) with t-distributed pseudo-misclosures, and (3) a classical least-squares procedure to solve the GHM with variance components and outlier removal. The comparison of the results demonstrates the precise, reliable, accurate and robust estimation of the parameters in particular by the second and third procedures in comparison to the first one. In addition, the results show that the second procedure is computationally more efficient than the other two.

Sign in / Sign up

Export Citation Format

Share Document