scholarly journals A Sensitive and Rapid Method for Detecting Formaldehyde in Brain Tissues

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Xiangpei Yue ◽  
Yaoyue Zhang ◽  
Wen Xing ◽  
Yutong Chen ◽  
Chenyang Mu ◽  
...  
Keyword(s):  
Response Time ◽  
Rapid Method ◽  
Spectrophotometric Method ◽  
Room Temperature ◽  
Limit Of Detection ◽  
Highly Sensitive ◽  
High Level ◽  
Optimal Ph ◽  
Yellow Compound ◽  
Time Point

The existing methods for detecting formaldehyde (FA) in brain samples are expensive and require sophisticated experimental procedures. Here, we established a highly sensitive and selective spectrophotometric method, which is based on a reaction in which FA reacts with colorless reagent 4-amino-3-penten-2-one (Fluoral-P) to produce a yellow compound, 3,5-diacetyl-1,4-dihydrolutidine (DDL), which can be detected by a spectrophotometer at 420 nm at room temperature. The sensitive response time point was found to be at the first hour, and the optimal pH of derivative reaction was pH 6.0. The limit of detection (LOD) and the limits of quantization (LOQ) for detecting FA were 0.5 μM and 2.5 μM, respectively. Using this method, an abnormally high level of FA was detected in both the brains of FA-injected mice and autopsy hippocampus tissues from patients with Alzheimer’s disease. This finding suggests that the modified Fluoral-P method is effective for measuring levels of FA in the brains.

scholarly journals Pengembangan Biosensor Berbasis Plastik Zona Mikro untuk Skrining Aktivitas Antidiabetes pada Ekstrak Tanaman Obat

2021 ◽  
Vol 9 (1) ◽  
pp. 41
Author(s):  
Indri Firma Wati ◽  
Bambang Kuswandi ◽  
Dwi Koko Pratoko
Keyword(s):  
Diabetes Mellitus ◽  
Response Time ◽  
Spectrophotometric Method ◽  
Limit Of Detection ◽  
Linear Range ◽  
T Test ◽  
Antidiabetic Activity ◽  
Limit Of Quantification ◽  
Antidiabetic Agents

Research on the diabetes mellitus (DM) treatment has recently been carried out, especially on discovering antidiabetic agents derived from plants. This study aims to determine the fabrication of microzone plastic-based biosensors, determine the optimal sensor conditions, analysis characteristics, and compare the biosensor with the UV-Vis spectrophotometric method. The results showed that the response time was 15 minutes, the linear range was 500-40000 µg / mL (R = 0.9989). The limit of detection (LOD) was 1109.6 µg / mL, and the limit of quantification (LOQ) was 3698.8 µg / mL. Biosensor filled up the precision parameters with an RSD value of less than 3.7% and an accuracy with recovery in the range of 95-105%. The biosensor is stable in storage at 25 ° C for 270 minutes and at chiller temperature for three days. The antidiabetic activity of the biosensor was compared with the UV-Vis spectrophotometer using the Independent Sample T-test and showed insignificant differences between the two methods.

scholarly journals A highly sensitive safrole sensor based on polyvinyl acetate (PVAc) nanofiber-coated QCM

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Kuwat Triyana ◽  
Aditya Rianjanu ◽  
Doni Bowo Nugroho ◽  
Ahmad Hasan As’ari ◽  
Ahmad Kusumaatmaja ◽  
...  
Keyword(s):  
Response Time ◽  
Polyvinyl Acetate ◽  
Limit Of Detection ◽  
High Surface ◽  
High Surface Area ◽  
Average Diameter ◽  
Promising Alternative ◽  
Force Microscopy ◽  
Atomic Force ◽  
Highly Sensitive

Abstract A novel, highly sensitive and selective safrole sensor has been developed using quartz crystal microbalance (QCM) coated with polyvinyl acetate (PVAc) nanofibers. The nanofibers were collected on the QCM sensing surface using an electrospinning method with an average diameter ranging from 612 nm to 698 nm and relatively high Q–factors (rigid coating). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to analyze the PVAc nanofiber surface morphology, confirming its high surface area and roughness, which are beneficial in improving the sensor sensitivity compared to its thin-film counterpart. The as-spun PVAc nanofiber sensor could demonstrate a safrole limit of detection (LOD) of down to 0.7 ppm with a response time of 171 s and a sensitivity of 1.866 Hz/ppm. It also showed good reproducibility, rapid response time, and excellent recovery. Moreover, cross-interference of the QCM sensor response to non-target gases was investigated, yielding very low cross-sensitivity and high selectivity of the safrole sensor. Owing to its high robustness and low fabrication cost, this proposed sensing device is expected to be a promising alternative to classical instrumental analytical methods for monitoring safrole-based drug precursors.

scholarly journals Highly Sensitive Detection of NO2 by Au and TiO2 Nanoparticles Decorated SWCNTs Sensors

Sensors ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 12 ◽  
Author(s):  
Ada Fort ◽  
Enza Panzardi ◽  
Ammar Al-Hamry ◽  
Valerio Vignoli ◽  
Marco Mugnaini ◽  
...  
Keyword(s):  
Response Time ◽  
Tio2 Nanoparticles ◽  
High Performance ◽  
Room Temperature ◽  
Gas Sensing ◽  
Nano Particles ◽  
Single Wall Carbon Nanotubes ◽  
Time Sensitivity ◽  
Highly Sensitive ◽  
Highly Sensitive Detection

The aim of this work is to investigate the gas sensing performance of single wall carbon nanotubes (SWCNTs)-based conductive sensors operating at low–medium temperatures (<250 °C). The investigated sensing films consists of an SWCNT network obtained by drop-casting a SWCNT suspension. Starting from this base preparation, different sensing devices were obtained by decorating the SWCNT network with materials suitable for enhancing the sensitivity toward the target gas. In particular, in this paper, nano-particles of gold and of TiO2 were used. In the paper, the performance of the different sensing devices, in terms of response time, sensitivity toward NO2 and cross-sensitivity to O2, CO and water vapor, were assessed and discussed. Sensors based on decorated SWCNT films showed high performance; in particular, the decoration with Au nano-particles allows for a large enhancement of sensitivity (reaching 10%/1 ppm at 240 °C) and a large reduction of response time. On the other hand, the addition of TiO2 nanoparticles leads to a satisfactory improvement of the sensitivity as well as a significant reduction of the response time at moderate temperatures (down to 200 °C). Finally, the suitability of using Au decorated SWCNTs-based sensors for room temperature sensing is demonstrated.

scholarly journals Highly sensitive immunoradiometric assay for serum thyroglobulin with minimal interference from autoantibodies

1996 ◽  
Vol 42 (2) ◽  
pp. 258-262 ◽  
Author(s):  
P Y Marquet ◽  
A Daver ◽  
R Sapin ◽  
B Bridgi ◽  
J P Muratet ◽  
...  
Keyword(s):  
Monoclonal Antibodies ◽  
Thyroid Carcinoma ◽  
Room Temperature ◽  
Limit Of Detection ◽  
Differentiated Thyroid Carcinoma ◽  
Immunoradiometric Assay ◽  
Serum Thyroglobulin ◽  
Highly Sensitive ◽  
Antigenic Domains

Abstract Five monoclonal antibodies (MAbs) directed against antigenic domains on thyroglobulin (Tg) not recognized by most anti-Tg human autoantibodies (aAbs) have been used to develop an improved IRMA for serum Tg with a limit of detection of 0.2 micrograms/L. Samples are incubated for 3 h in tubes coated with four anti-Tg MAbs. After washing, the tubes are incubated with the tracer MAb for 20 h at room temperature. Dilution and reproducibility tests demonstrated assay reliability. Tests performed on samples with (n = 361) or without (n = 283) aAbs showed that the TG IRMA Pasteur is largely independent of the marked interference generally caused by aAbs. These results were confirmed with an extended population of 2759 samples. For a cutoff of 1 micrograms/L, sensitivity and specificity were 0.97 and 1, respectively, in a follow-up of differentiated thyroid carcinoma in patients treated by total thyroidectomy.

Controlled Growth and Characterization Ag/ZnO Nanotetrapods for Humidity Sensing

2018 ◽  
Vol 21 (7) ◽  
pp. 462-467
Author(s):  
Babak Sadeghi
Keyword(s):  
Room Temperature ◽  
Zinc Complex ◽  
Water Solution ◽  
Particle Morphology ◽  
Quick Response ◽  
Separation System ◽  
Humidity Sensing ◽  
Sensor Material ◽  
Highly Sensitive

Aim and Objective: Ultrafine Ag/ZnO nanotetrapods (AZNTP) have been prepared successfully using silver (I)–bis (oxalato) zinc complex and 1, 3-diaminopropane (DAP) with a phase separation system, and have been injected into a diethyl/water solution. Materials and Methods: This crystal structure and lattice constant of the AZNTP obtained were investigated by means of a SEM, XRD, TEM and UV-vis spectrum. Results: The results of the present study demonstrated the growth and characterization AZNTP for humidity sensing and DAP plays a key role in the determination of particle morphology. AZNTP films with 23 nm in arm diameter have shown highly sensitive, quick response sensor material that works at room temperature.

Detection of Glucose in Human Serum Based on Silicon Dot Probe

2020 ◽  
Vol 16 (6) ◽  
pp. 744-752
Author(s):  
Kuan Luo ◽  
Xinyu Jiang
Keyword(s):  
Quantum Dots ◽  
Blood Glucose ◽  
Human Serum ◽  
Organic Dyes ◽  
Limit Of Detection ◽  
Fasting Blood Glucose ◽  
Glucose Biosensor ◽  
Metal Nanoclusters ◽  
Glucose Levels ◽  
Highly Sensitive

Background: Diabetes Mellitus (DM) is a major public metabolic disease that influences 366 million people in the world in 2011, and this number is predicted to rise to 552 million in 2030. DM is clinically diagnosed by a fasting blood glucose that is equal or greater than 7 mM. Therefore, the development of effective glucose biosensor has attracted extensive attention worldwide. Fluorescence- based strategies have sparked tremendous interest due to their rapid response, facile operation, and excellent sensitivity. Many fluorescent compounds have been employed for precise analysis of glucose, including quantum dots, noble metal nanoclusters, up-converting nanoparticles, organic dyes, and composite fluorescent microspheres. Silicon dot as promising quantum dots materials have received extensive attention, owing to their distinct advantages such as biocompatibility, low toxicity and high photostability. Methods: MnO2 nanosheets on the Si nanoparticles (NPs) surface serve as a quencher. Si NPs fluorescence can make a recovery by the addition of H2O2, which can reduce MnO2 to Mn2+, and the glucose can thus be monitored based on the enzymatic conversion of glucose by glucose oxidase to generate H2O2. Therefore, the glucose concentration can be derived by recording the fluorescence recovery spectra of the Si NPs. Results: This probe enabled selective detection of glucose with a linear range of 1-100 μg/mL and a limit of detection of 0.98 μg/mL. Compared with the commercial glucometer, this method showed favorable results and convincing reliability. Conclusion: We have developed a novel method based on MnO2 -nanosheet-modified Si NPs for rapid monitoring of blood glucose levels. By combining the highly sensitive H2O2/MnO2 reaction with the excellent photostability of Si NPs, a highly sensitive, selective, and cost-efficient sensing approach for glucose detection has been designed and applied to monitor glucose levels in human serum with satisfactory results.

scholarly journals UV SPECTROPHOTOMETRIC ANALYSIS AND VALIDATION OF OSELTAMIVIRPHOSPHATE IN PURE AND PHARMACEUTICAL FORMULATION

2020 ◽  
pp. 111-114 ◽  
Author(s):  
SACHIN A. YANJANE ◽  
SHRISHAIL M. GHURGHURE ◽  
VINOD K. MATOLE
Keyword(s):  
Spectrophotometric Method ◽  
Spectrophotometric Analysis ◽  
Pharmaceutical Formulation ◽  
Ich Guidelines ◽  
Highly Sensitive ◽  
Double Beam ◽  
Recovery Study ◽  
Uv Visible ◽  
Oseltamivir Phosphate ◽  
Simple Economic

Objective: A new, simple, economical, precise, sensitive, linear, accurate, rapid UV spectrophotometric method has been developed for the estimation of Oseltamivir Phosphate in pure form and pharmaceutical formulation. Methods: This UV method was developed using Methanol as a solvent. In the present method, the wavelength selected for analysis was 218 nm. UV-Visible double beam spectrophotometer (Systronic 2201) was used to carry out spectral analysis. The ICH guidelines were used to validate the method. Results: The method was validated for linearity, range, accuracy, precision, robustness, LOD and LOQ. Linearity was found in the range of 10-50µg/ml. Accuracy was performed by using a recovery study. The amount of drug recovered was found to be in the range of 99.01-100.1%. The % RSD value was found to be less than 2. Conclusion: The developed UV spectrophotometric method was found to be simple, economic, sensitive, easy, accurate, linear, specific and highly sensitive and can be used for routine estimation of Oseltamivir Phosphate.

scholarly journals Computational Design of a Molecularly Imprinted Polymer for the Biomonitoring of the Organophosphorous Metabolite Chlorferron

Biosensors ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 192
Author(s):  
Bakhtiyar Qader ◽  
Issam Hussain ◽  
Mark Baron ◽  
Rebeca Jiménez-Pérez ◽  
Guzmán Gil-Ramírez ◽  
...  
Keyword(s):  
Biological Samples ◽  
Limit Of Detection ◽  
Computational Design ◽  
Signal Change ◽  
Highly Sensitive ◽  
Limit Of Quantitation ◽  
Molecularly Imprinting Polymers ◽  
Mip Sensor ◽  
Parasitic Mites

Coumaphos is an organophosphorus compound used as insecticide and frequently used by beekeepers for the management of parasitic mites. The most important metabolite, chlorferron (CFN), has been identified in biological samples and foodstuff. The need to quickly identify the presence of typical metabolites, as an indication of interaction with coumaphos has driven the need to produce a highly sensitive electrochemical method for chlorferron analysis, based on molecularly imprinting polymers (MIP) technology. It showed irreversible behaviour with mixed diffusion/adsorption-controlled reactions at the electrode surface. A monoelectronic mechanism of reaction for oxidation has also been suggested. The linear range observed was from 0.158 to 75 µM. Median precision in terms of %RSD around 3% was also observed. For DPV, the limit of detection (LOD) and the limit of quantitation (LOQ) for the CFN-MIP were 0.158 µM and 0.48 µM, respectively. The obtained median % recovery was around 98%. The results were also validated to reference values obtained using GC-MS. Urine and human synthetic plasma spiked with CFN were used to demonstrate the usability of the method in biological samples, showing the potential for biomonitoring. The developed imprinted sensor showed maximum signal change less than 16.8% when related metabolites or pesticide were added to the mix, suggesting high selectivity of the MIP sensor toward CFN molecules. The results from in vitro metabolism of CMP analysed also demonstrates the potential for detection and quantification of CFN in environmental samples. The newly developed CFN-MIP sensor offers similar LoDs than chromatographic methods with shorter analysis time.

scholarly journals A rapid, accurate, scalable, and portable testing system for COVID-19 diagnosis

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Guanhua Xun ◽  
Stephan Thomas Lane ◽  
Vassily Andrew Petrov ◽  
Brandon Elliott Pepa ◽  
Huimin Zhao
Keyword(s):  
Limit Of Detection ◽  
Low Cost ◽  
High Volume ◽  
N Gene ◽  
Testing System ◽  
Target Sequence ◽  
One Pot ◽  
Sequence Detection ◽  
Highly Sensitive ◽  
Speed Accuracy

AbstractThe need for rapid, accurate, and scalable testing systems for COVID-19 diagnosis is clear and urgent. Here, we report a rapid Scalable and Portable Testing (SPOT) system consisting of a rapid, highly sensitive, and accurate assay and a battery-powered portable device for COVID-19 diagnosis. The SPOT assay comprises a one-pot reverse transcriptase-loop-mediated isothermal amplification (RT-LAMP) followed by PfAgo-based target sequence detection. It is capable of detecting the N gene and E gene in a multiplexed reaction with the limit of detection (LoD) of 0.44 copies/μL and 1.09 copies/μL, respectively, in SARS-CoV-2 virus-spiked saliva samples within 30 min. Moreover, the SPOT system is used to analyze 104 clinical saliva samples and identified 28/30 (93.3% sensitivity) SARS-CoV-2 positive samples (100% sensitivity if LoD is considered) and 73/74 (98.6% specificity) SARS-CoV-2 negative samples. This combination of speed, accuracy, sensitivity, and portability will enable high-volume, low-cost access to areas in need of urgent COVID-19 testing capabilities.

Sign in / Sign up

Export Citation Format

Share Document