scholarly journals Synthesis of Ruthenium Complex Based on 2,6-Bis(1-(phenyl)-1H-benzo[d]imidazol-2-yl)pyridine and 2-(1-Phenyl-1H-benzo[d]imidazol-2-yl)benzoate and Catalytical Oxidation Property of 1-(1H-Benzo[d]imidazol-2-yl)ethanol to 1-(1H-Benzo[d]imidazol-2-yl)ethanone with H2O2

2017 ◽  
Vol 2017 ◽  
pp. 1-7
Author(s):  
Shenggui Liu ◽  
Rongkai Pan ◽  
Guobi Li ◽  
Wenyi Su ◽  
Chunlin Ni
Keyword(s):  
Reaction Time ◽  
Reaction Temperature ◽  
Oxidation Reaction ◽  
Ruthenium Complex ◽  
Molar Ratio ◽  
Optimal Conditions ◽  
Reaction Conditions ◽  
Influence Of Temperature ◽  
Catalyst Amount ◽  
Optimal Reaction

A new ruthenium complex, Ru(bpbp)(pbb)Cl, based on 2,6-bis(1-(phenyl)-1H-benzo[d]imidazol-2-yl)pyridine (bpbp) and 2-(1-phenyl-1H-benzo[d]imidazol-2-yl)benzoate (pbb) was synthesized. The complex Ru(bpbp)(pbb)Cl could catalytically oxidize 1-(1H-benzo[d]imidazol-2-yl)ethanol to 1-(1H-benzo[d]imidazol-2-yl)ethanone with H2O2 as oxidant. Influence of temperature and catalyst amount on the oxidation reaction was evaluated. The reaction optimal conditions are as follows: molar ratio of catalyst to substrate to H2O2 is 1 : 1000 : 3000, the proper reaction temperature is 50°C and reaction time lasts 5 h, and the isolated yield of 1-(1H-benzo[d]imidazol-2-yl)ethanol to 1-(1H-benzo[d]imidazol-2-yl)ethanone under the optimal reaction conditions is 57%.

Synthesis of a Ruthenium Complex Based on 2,6-Bis[1-(Pyridin-2-yl)-1H-Benzo[d]Imidazol-2-yl]Pyridine and Catalytic Oxidation of (1H-Benzo[d]-Imidazol-2-yl)Methanol to 1H-Benzo[d]Imidazole-2-Carbaldehyde with H2O2

2017 ◽  
Vol 41 (2) ◽  
pp. 88-92
Author(s):  
Shenggui Liu ◽  
Rongkai Pan ◽  
Wenyi Su ◽  
Guobi Li ◽  
Chunlin Ni
Keyword(s):  
Reaction Time ◽  
Catalytic Oxidation ◽  
Reaction Temperature ◽  
Ruthenium Complex ◽  
Reaction Conditions ◽  
Molar Ratios ◽  
Optimal Reaction

2,6-Bis[1-(pyridin-2-yl)-1H-benzo[d]-imidazol-2-yl]pyridine (bpbp), which has been synthesised by intramolecular thermocyclisation of N2,N6-bis[2-(pyridin-2-ylamino)phenyl]pyridine-2,6-dicarboxamide, reacts with sodium pyridine-2,6-dicarboxylate (pydic) and RuCl3 to give [Ru(bpbp)(pydic)] which can catalyse the oxidation of (1H-benzo[d]imidazol-2-yl)methanol to 1H-benzo[d]imidazole-2-carbaldehyde by H2O2. The optimal reaction conditions were: molar ratios of catalyst to substrate to H2O2 set at 1: 1000: 3000; reaction temperature 50 °C; reaction time 5 h. The yield of (1H-benzo[d]imidazol-2-yl) methanol was 70%.

Synthesis of Benzaldehyde 1, 2-Propanediol Acetal by Using Ionic Liquid [Hmim]HSO4 as Catalyst

2012 ◽  
Vol 550-553 ◽  
pp. 400-403 ◽  
Author(s):  
Xue Nan Sun ◽  
Li Cui ◽  
Tong Kuan Xu ◽  
Da Zhi Wang
Keyword(s):  
Ionic Liquid ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Raw Materials ◽  
Product Yield ◽  
Experimental Results ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Good Catalyst ◽  
Optimal Reaction

Benzaldehyde 1, 2-propanediol acetal was synthesized from benzaldehyde and 1, 2-propanediol in the presence of ionic liquid [HMIM]HSO4. The effect of the amount of catalyst, reaction time, reaction temperature, and the molar ratio of raw materials agent on the product yield was investigated respectively. Experimental results demonstrate that ionic liquid [HMIM]HSO4is a good catalyst for preparation of benzaldehyde 1, 2-propanediol acetal. Results showed the optimal reaction conditions are as follows: the mole ratio of benzaldehyde to 1, 2-propanediol is 1：1.3, the amount of catalyst is 3.0g, the reaction temperature is 343K, and the reaction time is 4h. The achieved yield of acetal is 78. 7%.

Synthesis of Propylene Carbonate Catalyzed by Copper-containing Hydrotalcite-like Compounds

2010 ◽  
Vol 1279 ◽  
Author(s):  
Xianmei Xie ◽  
Lian Duan ◽  
Zhenghuang Wu ◽  
Lina Wang ◽  
Kai Yan ◽  
...  
Keyword(s):  
Reaction Time ◽  
Propylene Carbonate ◽  
Orthogonal Test ◽  
Molar Ratio ◽  
Test Design ◽  
Optimal Conditions ◽  
Reaction Conditions ◽  
Catalytic Activities ◽  
Orthogonal Test Design ◽  
Optimal Reaction

AbstractCuFe-Hydrotalcite-Like Compounds (CuFe-HTLcs) were synthesized by coprecipitation with Cu(NO3)2·6H2O, Fe(NO3)3·9H2O, NaOH and Na2CO3 solution. The sample with Cu2+ / Fe3+ = 2 was of the highest crystalline characterized by XRD and particle size distribution. The synthesis of propylene carbonate from 1,2-propanediol (PG) and urea was performed to evaluate the catalytic activities of the CuFe-HTLcs. The effects of reaction time, temperature, dosage of catalyst on the synthesis of propylene carbonate were fully discussed. The optimal reaction conditions were determined by using orthogonal test design: reaction temperature 170 °C, dosage of catalyst 0.2 g, and molar ratio of PG to urea 2:1, reaction time 3 h. Under the optimal conditions, the conversion of urea nearly reached 100 %, and the selectivity of propylene carbonate was up to 90.4%.

scholarly journals Synthesis of propylene carbonate from urea and 1,2-propylene glycol over metal carbonates

2011 ◽  
Vol 17 (3) ◽  
pp. 323-331 ◽  
Author(s):  
Jiancheng Zhou ◽  
Wu Dongfang ◽  
Birong Zhang ◽  
Yali Guo
Keyword(s):  
Reaction Time ◽  
Propylene Glycol ◽  
Propylene Carbonate ◽  
Reaction Temperature ◽  
Reaction Conditions ◽  
Lead Carbonate ◽  
Synthetic Process ◽  
Metal Carbonates ◽  
Optimal Reaction ◽  
Mixed Carbonate

A series of single-metal carbonates and Pb-Zn mixed-metal carbonates were prepared as catalysts for alcoholysis of urea with 1,2-propylene glycol (PG) for the synthesis of propylene carbonate (PC). The mixed carbonates all show much better catalytic activities than the single carbonates, arising from a strong synergistic effect between the two crystalline phases, hydrozincite and lead carbonate. The mixed carbonate with Pb/Zn=1:2 gives the highest yield of PC, followed by the mixed carbonate with Pb/Zn=1:3. Furthermore, Taguchi method was used to optimize the synthetic process for improving the yield of PC. It is shown that the reaction temperature is the most significant factor affecting the yield of PC, followed by the reaction time, and that the optimal reaction conditions are the reaction time at 5 hours, the reaction temperature at 180 oC and the catalyst amount at 1.8 wt%, resulting in the highest PC yield of 96.3%.

scholarly journals Biodiesel Production from a Novel Nonedible Feedstock, Soursop (Annona muricata L.) Seed Oil

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2562 ◽  
Author(s):  
Chia-Hung Su ◽  
Hoang Nguyen ◽  
Uyen Pham ◽  
My Nguyen ◽  
Horng-Yi Juan
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Annona Muricata ◽  
Reaction Conditions ◽  
Biodiesel Feedstock ◽  
Acid Catalyzed ◽  
American Society ◽  
Optimal Reaction

This study investigated the optimal reaction conditions for biodiesel production from soursop (Annona muricata) seeds. A high oil yield of 29.6% (w/w) could be obtained from soursop seeds. Oil extracted from soursop seeds was then converted into biodiesel through two-step transesterification process. A highest biodiesel yield of 97.02% was achieved under optimal acid-catalyzed esterification conditions (temperature: 65 °C, 1% H2SO4, reaction time: 90 min, and a methanol:oil molar ratio: 10:1) and optimal alkali-catalyzed transesterification conditions (temperature: 65 °C, reaction time: 30 min, 0.6% NaOH, and a methanol:oil molar ratio: 8:1). The properties of soursop biodiesel were determined and most were found to meet the European standard EN 14214 and American Society for Testing and Materials standard D6751. This study suggests that soursop seed oil is a promising biodiesel feedstock and that soursop biodiesel is a viable alternative to petrodiesel.

Study on Catalytic Performance of Supported HPW/C Catalyst for Diethyl Adipate Synthesis

2012 ◽  
Vol 468-471 ◽  
pp. 1371-1374
Author(s):  
Ke Nian Wei ◽  
Bin Zhou ◽  
Jiang Quan Ma ◽  
Yan Wang
Keyword(s):  
Physical Chemistry ◽  
Reaction Time ◽  
Adipic Acid ◽  
Acid Content ◽  
Catalytic Performance ◽  
Impregnation Method ◽  
Reaction Conditions ◽  
Catalyst Amount ◽  
Reaction Performance ◽  
Optimal Reaction

HPW/C catalysts were prepared using impregnation method. The physical chemistry properties of the catalysts were characterized employing XRD and NH3-TPD.The effects of HPW loading, catalyst amount and reaction time on the catalyst performances were investigated. The results more acid content and active center contribute to the reaction performance. Under the optimal reaction conditions of 0.8g 29%(w) HPW/C as the catalyst, n(adipic acid): n(ethanol):n(toluene)=1:6:1,5h,the etherification rate was 97.3%.

Preparation and Characterization of Cationic Cassia Tora Gum

2013 ◽  
Vol 781-784 ◽  
pp. 526-530 ◽  
Author(s):  
Shao Ying Li ◽  
Chun Mei Niu ◽  
Hua Yu Zhong
Keyword(s):  
Reaction Time ◽  
Reaction Temperature ◽  
Water Solubility ◽  
Cold Water ◽  
Water Solution ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Cassia Tora ◽  
Dispersing Agent

Series of cationic cassia tora gum (CCTG) were synthesized using 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CHPTAC) as cationic etherifying agent, isopropanol-water solution as dispersing agent, in presence of sodium hydroxide under different reaction conditions. The optimum ratio for preparing the cationic cassia tora gum are that CHPTAC-CTG molar ratio is 0.6:1; NaOH-CHPTAC molar ratio is 1.3:1.The optimum conditions are that reaction temperature is 55°Cand reaction time is 3.5 h. The cold water solubility was improved apparently. The solution transmittance has corresponding relationship with the nitrogen content (N%) in the certain range, and the maximum transmittance is up to 87.2%. N% increased with the increase of reaction time and stable N% can be obtained in shorter reaction time at higher reaction temperature. The products were characterized by 13C-NMR. The heat resistance of CTG and CCTG were analyzed.

Synthesis of Butanone 1,2 - Propanediol Ketal by Sulfamic Acid as Catalyzed

2013 ◽  
Vol 781-784 ◽  
pp. 276-279
Author(s):  
Yu Hang Zhao ◽  
Li Cui ◽  
Da Zhi Wang ◽  
Tong Kuan Xu ◽  
Yong Peng Li
Keyword(s):  
Reaction Time ◽  
Reaction Temperature ◽  
Raw Materials ◽  
Sulfamic Acid ◽  
Product Yield ◽  
Experimental Results ◽  
Reaction Conditions ◽  
Optimal Reaction

Butanone 1,2-propanediol ketal was synthesized by butanone and 1,2-propanediol as raw materials and sulfamic acid as catalyst. The effects of the mole ratio of raw materials agent, the dosage of the water-carrying agent and catalyst, reaction time on the product yield were discussed separately. Experimental results showed that sulfamic acid was a suitable catalyst for synthesizing of butanone 1,2-propanediol ketal. And the optimal reaction conditions are as follows: the mole ratio of butanone to 1,2-propanediol is 1:1.5, the amount of the catalyst is 2.2%, the water-carrying agent is 25ml, the reaction temperature is 358-378K and reaction time 3h. In this condition, the yield of production could reach 93.8%.

Study on Synthesis of Nitrophenyl Isocyanates Using Triphosgene

2012 ◽  
Vol 550-553 ◽  
pp. 1039-1042 ◽  
Author(s):  
Gui Rong Cao ◽  
Xue Yan Zhao ◽  
Rui Jie Xiao
Keyword(s):  
Reaction Time ◽  
Reaction Temperature ◽  
Molar Ratio ◽  
Optimal Conditions ◽  
Optimum Reaction

In this paper, triphosgene respectively reacting with o-nitrophenyl aniline, m-nitrophenyl aniline and p-nitrophenyl aniline to synthesize corresponding isocyanates. The effects of reactants molar ratio, reaction time and reaction temperature on the yield were investigated. As a result, using 1,2-dichloroethane as reaction solvent, the optimum molar ratio of the three kinds of nitroaniline and triphosgene were all 2.5:1, the optimum reaction time of synthesis of o-nitrophenyl isocyanate, m-nitrophenyl isocyanate and p-nitrophenyl isocyanate respectively was 6h, 5.5h and 5h; the optimum reaction temperature of synthesis of the three kinds of nitrophenyl isocyanates were all 75°C. Under the optimal conditions, the yield of o-nitrophenyl isocyanate, m-nitrophenyl isocyanate and p-nitrophenyl isocyanate could respectively be 80.3%, 83.7% and 83.5%. The products were characterized by meltingtest, ebulliometry, IR, and HPLC

Synthesis of Diethyl Carbonate from Ethyl Carbamate and Ethanol with Acid as Catalyst

2013 ◽  
Vol 821-822 ◽  
pp. 1081-1084 ◽  
Author(s):  
Xian Ye Qin ◽  
Biao Liu ◽  
Bing Han ◽  
Wen Bo Zhao ◽  
Shui Sheng Wu ◽  
...  
Keyword(s):  
Catalytic Activity ◽  
Reaction Time ◽  
Reaction Temperature ◽  
Ethyl Carbamate ◽  
Diethyl Carbonate ◽  
Bronsted Acid ◽  
Optimal Conditions ◽  
Reaction Conditions ◽  
Brönsted Acid ◽  
Pyrophosphoric Acid

The catalytic activity of many Lewis and Bronsted acid for the synthesis of diethyl carbonate (DEC) from ethyl carbamate (EC) and ethanol was evaluated in a bath reactor. Pyrophosphoric acid (H4P7O2) which showed the best activity was selected to further investigate the effect of reaction conditions, such as reaction temperature, catalyst dose and reaction time, on the yield of DEC. Under the optimal conditions, DEC yield can reach 29.1%.

Sign in / Sign up

Export Citation Format

Share Document