scholarly journals Efficient Iris Localization via Optimization Model

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Qi Wang ◽  
Zhipeng Liu ◽  
Shu Tong ◽  
Yuqi Yang ◽  
Xiangde Zhang

Iris localization is one of the most important processes in iris recognition. Because of different kinds of noises in iris image, the localization result may be wrong. Besides this, localization process is time-consuming. To solve these problems, this paper develops an efficient iris localization algorithm via optimization model. Firstly, the localization problem is modeled by an optimization model. Then SIFT feature is selected to represent the characteristic information of iris outer boundary and eyelid for localization. And SDM (Supervised Descent Method) algorithm is employed to solve the final points of outer boundary and eyelids. Finally, IRLS (Iterative Reweighted Least-Square) is used to obtain the parameters of outer boundary and upper and lower eyelids. Experimental result indicates that the proposed algorithm is efficient and effective.

Author(s):  
WEN-CONG ZHANG ◽  
BIN LI ◽  
XUE-YI YE ◽  
ZHEN-QUAN ZHUANG ◽  
KONG-QIAO WANG

Iris localization is a key component of practical iris recognition system. Previous algorithms show good localization performances for iris images captured in the ideal conditions. However, in practice, the quality of iris image is greatly influenced by luminance, eyelashes, hair or glasses frame, which will cause mislocalization. In order to improve the robustness of iris localization, this paper proposes a new localization algorithm based on the radial symmetry transform, in which the radial symmetry characteristic of the pupil is utilized to realize iris localization. Experimental results show that the proposed algorithm can efficiently avoid the interference of luminance and other bad conditions, and realize robust precise localization in a real-time system.


2013 ◽  
Vol 380-384 ◽  
pp. 1176-1179
Author(s):  
Yi Huang ◽  
Xiao Ping Zeng

Iris localization is to detect outer-and-inner boundaries of iris in an iris image. In the paper, an improved algorithm was proposed to quickly and effectively locate outer-and-inner boundaries. As for this algorithm, the first is to block an iris image and extract its sub-image blocks which cover pupil; the second is to set a binary threshold of pupil by adopting the method of Maximum Variance between Clusters; the third is to get the value outer-boundary-points of iris, on the basis of gray gradient of key Regions-of-interest; the last is to select some characteristic pixels in regions of interest respectively and fit outer-and-inner boundaries of iris according to curve fitting.


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Jinfeng Yu ◽  
Lei Zhang ◽  
Zhi Wang

Iris localization is the most crucial part of the iris processing because its accuracy can directly affect the accuracy of biometric identification in subsequent steps. Yet, the quality of iris images may be sharply degraded due to interference from eyelashes and reflections during image acquisition, which can affect the localization accuracy adversely. To solve the problem, an iris localization algorithm based on effective area is proposed. First, YOLOv4 is used to crop the image to obtain the effective iris area, which is beneficial in improving the accuracy of subsequent localization. Furthermore, a method to remove reflective noise is proposed, which can effectively avoid the problem of noise interference in the process of inner boundary determination. Finally, aiming at the edge deviation caused by eyelashes, an outer boundary adjustment method is proposed. The experimental results show that the proposed method achieves good performance in the localization of iris images of both good quality and noise interference and outperforms other state-of-the-art methods.


Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2708 ◽  
Author(s):  
Xiaojun Mei ◽  
Huafeng Wu ◽  
Jiangfeng Xian ◽  
Bowen Chen ◽  
Hao Zhang ◽  
...  

As an important means of multidimensional observation on the sea, ocean sensor networks (OSNs) could meet the needs of comprehensive information observations in large-scale and multifactor marine environments. In what concerns OSNs, accurate location information is the basis of the data sets. However, because of the multipath effect—signal shadowing by waves and unintentional or malicious attacks—outlier measurements occur frequently and inevitably, which directly degrades the localization accuracy. Therefore, increasing localization accuracy in the presence of outlier measurements is a critical issue that needs to be urgently tackled in OSNs. In this case, this paper proposed a robust, non-cooperative localization algorithm (RNLA) using received signal strength indication (RSSI) in the presence of outlier measurements in OSNs. We firstly formulated the localization problem using a log-normal shadowing model integrated with a first order Taylor series. Nevertheless, the problem was infeasible to solve, especially in the presence of outlier measurements. Hence, we then converted the localization problem into the optimization problem using squared range and weighted least square (WLS), albeit in a nonconvex form. For the sake of an accurate solution, the problem was then transformed into a generalized trust region subproblem (GTRS) combined with robust functions. Although GTRS was still a nonconvex framework, the solution could be acquired by a bisection approach. To ensure global convergence, a block prox-linear (BPL) method was incorporated with the bisection approach. In addition, we conducted the Cramer–Rao low bound (CRLB) to evaluate RNLA. Simulations were carried out over variable parameters. Numerical results showed that RNLA outperformed the other algorithms under outlier measurements, notwithstanding that the time for RNLA computation was a little bit more than others in some conditions.


2013 ◽  
Vol 658 ◽  
pp. 597-601
Author(s):  
Xiao Wen Xu

Segmenting the non-ideal iris images accurately is a main problem for iris recognition, due to the impact of the eyelids, eyelashes and deformation. The paper presents an iris segmentation method based on an improved level set. Firstly, we used gray projection algorithm to locate the pupil. Secondly, we applied the least square fitting algorithm to estimate the boundary between the pupil and the iris. Finally, we used the level set method to accurately segment the iris. Experimental results demonstrate the segmentation accuracy for outer boundary of the iris is 98.59%. The method presented in this paper is superior to Daugman method and Hough transform algorithm in iris segmentation, especially for non-ideal iris images.


Author(s):  
Jing Bai ◽  
Le Fan ◽  
Shuyang Zhang ◽  
Zengcui Wang ◽  
Xiansheng Qin

Purpose Both geometric and non-geometric parameters have noticeable influence on the absolute positional accuracy of 6-dof articulated industrial robot. This paper aims to enhance it and improve the applicability in the field of flexible assembling processing and parts fabrication by developing a more practical parameter identification model. Design/methodology/approach The model is developed by considering both geometric parameters and joint stiffness; geometric parameters contain 27 parameters and the parallelism problem between axes 2 and 3 is involved by introducing a new parameter. The joint stiffness, as the non-geometric parameter considered in this paper, is considered by regarding the industrial robot as a rigid linkage and flexible joint model and adds six parameters. The model is formulated as the form of error via linearization. Findings The performance of the proposed model is validated by an experiment which is developed on KUKA KR500-3 robot. An experiment is implemented by measuring 20 positions in the work space of this robot, obtaining least-square solution of measured positions by the software MATLAB and comparing the result with the solution without considering joint stiffness. It illustrates that the identification model considering both joint stiffness and geometric parameters can modify the theoretical position of robots more accurately, where the error is within 0.5 mm in this case, and the volatility is also reduced. Originality/value A new parameter identification model is proposed and verified. According to the experimental result, the absolute positional accuracy can be remarkably enhanced and the stability of the results can be improved, which provide more accurate parameter identification for calibration and further application.


Sign in / Sign up

Export Citation Format

Share Document