scholarly journals Investigation of Properties of Silk Fiber Produced in Ethiopia

2017 ◽  
Vol 2017 ◽  
pp. 1-5 ◽  
Author(s):  
Ayano Koyrita Banale
Keyword(s):  
Physical Properties ◽  
Research Paper ◽  
Silk Fiber ◽  
Average Weight ◽  
Atmospheric Conditions ◽  
Basic Properties ◽  
Fiber Fineness

The atmospheric conditions and other facilities to rear silk filaments are good in Ethiopia. In Awassa, Awash Melkassa, and Kombolcha silk rearing is started with good progress. The quality of the cocoons produced in the country is not determined in relation to commercial silk produced in major silk producing countries. So far there was no information available about the basic properties of silk filaments produced. In this research paper, the different physical properties of the eri and mulberry cocoon and their filaments were evaluated. Eri cocoons have shell ratio of approximately 14%, average fiber fineness of 3 dtex, and average weight of 3.2–3.3 g, while mulberry cocoons have raw silk ratio of 13-14%, average fiber fineness of 2 dtex, and average weight of 1.5 g. Even though the method of rearing, handling, and harvesting of the cocoons is poor, the physical properties of the silk produced in Ethiopia fall within the limits of commercial silk produced in major silk producing countries.

Pengaruh Penambahan Air pada Pengolahan Susu Kedelai

2015 ◽  
Vol 4 (1) ◽  
pp. 8-13
Author(s):  
Priscillia Picauly ◽  
Josefina Talahatu ◽  
Meitycorfrida Mailoa
Keyword(s):  
Glycine Max ◽  
Physical Properties ◽  
Sweet Taste ◽  
Soya Milk ◽  
Randomized Design ◽  
Soybean Extract ◽  
Glycine Max L ◽  
Completely Randomized Design ◽  
Water Ratio

Soybean (Glycine max (L) Merr) is needed as an alternative diversification in order to increase protein consumption. Soybean can be processed into variety of foods and drinks. The most popular drink from soybean is soya milk which is made from soybean extract yielded from the addition of water. The amount of water added determine the quality of soya milk due to its effect on the chemical and physical properties of soya milk. This research was intended to find out the proper ratio of soybean and water in the processing of soya milk to yield the best quality. A completely randomized design was used with eight treatments of soybean and water ratio as follows, ratio of 1 : 6, ratio of 1 : 8, ratio of 1 : 10, ratio of 1 : 12, ratio of 1 : 14, ratio of 1 : 16, ratio of 1 : 18 and ratio of 1 : 20. Result showed the soybean and water ratio 1 : 10 in the processing of soya milk yielded milk having good quality according to its chemical with protein content of 2.53%, fat of 1.20%, sugar total of 1.60%, pH of 7.1, and organoleptic characteristies of both somewhat sweet taste and viscous texture.

MUELLER ALLOY 3140

Alloy Digest ◽  
1983 ◽  
Vol 32 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Lead Content ◽  
Atmospheric Conditions ◽  
Excellent Corrosion Resistance ◽  
High Copper ◽  
Screw Machine

Abstract MUELLER Alloy 3140 is a high-copper alloy with moderate strength, a rich bronze color and excellent corrosion resistance. Its lead content gives it excellent machinability which makes it suitable for screw-machine applications. Its uses include many screw-machine products, decorative hardware, pickling crates and parts to resist severe atmospheric conditions. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-451. Producer or source: Mueller Brass Company.

Systems of Weed Control for Peanuts

Weed Science ◽  
1973 ◽  
Vol 21 (3) ◽  
pp. 176-180 ◽  
Author(s):  
E. W. Hauser ◽  
S. R. Cecil ◽  
C. C. Dowler
Keyword(s):  
Seed Germination ◽  
Weed Control ◽  
Soil Types ◽  
Average Weight ◽  
Clay Loam ◽  
Sandy Clay Loam ◽  
Effective System ◽  
Economical System ◽  
Grade Average

Systems of weed control composed of (a) herbicides only, (b) herbicides plus cultivation, or (c) cultivation only were devised. The most effective systems, involving herbicide sequences plus one “non-dirting” layby cultivation, controlled twelve troublesome species of weeds with acceptable yields of peanuts (Arachis hypogaea L.). On Greenville sandy clay loam, a particularly effective and economical system of weed control consisted of (a) N-butyl-N-ethyl-α,α,α-trifluoro-2,6-dinitro-p-toluidine (benefin) used as a preplanting incorporated treatment, then (b) S-propyl dipropylthiocarbamate (vernolate) either incorporated into the soil before planting or injected at planting, and finally, (c) a layby cultivation 5 to 6 weeks after planting. A similarly effective system on Tifton loamy sand involved vernolate injected at planting, 2-sec-butyl-4,6-dinitrophenol (dinoseb) at “cracking”, and 4-(2,4-dichlorophenoxy)butyric acid (2,4-DB) as a postemergence treatment followed by the layby cultivation. The “non-dirting” layby cultivation, averaged over both years and herbicide sequences, significantly increased yields of peanuts on both soil types. None of the systems of weed control caused consistent differences in market grade, average weight per seed, germination, or organoleptic quality of the peanuts.

Quantitative Study on the Effect of Extrusion Process of AZ80 Magnesium Alloy

2010 ◽  
Vol 129-131 ◽  
pp. 1191-1195
Author(s):  
Yan Lou
Keyword(s):  
Set Theory ◽  
Rough Set ◽  
Rough Set Theory ◽  
Extrusion Process ◽  
Average Weight ◽  
Characteristic Parameters ◽  
Billet Temperature ◽  
Az80 Magnesium Alloy ◽  
Ram Speed

By data mining from 3DFEM simulation and Rough Set Theory (RST), it was performed that the extrusion process and die structures effect on the quality of AZ80 magnesium extrudate. The weights of the effect can be obtained. The results show that the effect of the billet temperature on the product quality is dominate, and its average weight is 0.27. The second important parameter is the ram speed and its average weight is 0.22. In addition, it was also found that the effect of the die characteristic parameters on the extrudate is insignificant.

Discriminant analysis-based modeling of cotton fiber and yarn properties

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Baneswar Sarker ◽  
Shankar Chakraborty
Keyword(s):  
Discriminant Analysis ◽  
Physical Properties ◽  
Cotton Fiber ◽  
Fiber Strength ◽  
Natural Fibers ◽  
Content Type ◽  
Fiber Properties ◽  
Yarn Properties ◽  
Fiber Fineness ◽  
Genetic And Environmental Factors

Purpose Like all other natural fibers, the physical properties of cotton also vary owing to changes in the related genetic and environmental factors, which ultimately affect both the mechanics involved in yarn spinning and the quality of the yarn produced. However, information is lacking about the degree of influence that those properties impart on the spinnability of cotton fiber and the strength of the final yarn. This paper aims to discuss this issue. Design/methodology/approach This paper proposes the application of discriminant analysis as a multivariate regression tool to develop the causal relationships between six cotton fiber properties, i.e. fiber strength (FS), fiber fineness (FF), upper half mean length (UHML), uniformity index (UI), reflectance degree and yellowness and spinning consistency index (SCI) and yarn strength (YS) along with the determination of the respective contributive roles of those fiber properties on the considered dependent variables. Findings Based on the developed discriminant function, it can be revealed that FS, UI, FF and reflectance degree are responsible for higher YS. On the other hand, with increasing values of UHML and fiber yellowness, YS would tend to decrease. Similarly, SCI would increase with higher values of FS, UHML, UI and reflectance degree, and its value would decrease with increasing FF and yellowness. Originality/value The discriminant functions can effectively envisage the contributive role of each of the considered cotton fiber properties on SCI and YS. The discriminant analysis can also be adopted as an efficient tool for investigating the effects of various physical properties of other natural fibers on the corresponding yarn characteristics.

Study of feed quality and biological indicators of varietal feeding of newly created different ploidy mulberry varieties

2021 ◽  
Vol 68 (07) ◽  
pp. 7-11
Author(s):  
Mahir Həmzə oğlu Hacıyev ◽  
◽  
Vəfa İbrahim qızı Məhərrəmova ◽  
Keyword(s):  
Biological Indicators ◽  
Average Weight ◽  
Biological Parameters ◽  
Average Mass ◽  
Feed Quality ◽  
Leaf Yield ◽  
New Varieties

The article clarifies the effect of the leaves of various newly created ploidy mulberry varieties on the productivity of mulberry silkworms, as well as on the biological parameters of silkworms. New varieties are described by conducting varietal feeding to determine the feed quality of varieties by providing information on leaf yield and the leaf yield of newly created varieties, by studying the biological parameters of varietal feeding, by determining the average mass of alive cocoons, silkness%, cocoon yield. Keywords: mulberry, sort, leaf yield, silkiness, viability, average weight of cocoon, cocoon product

Morphological traits of the development of the skin and wool cover in sheep of Prikatunsky meat and wool type

2021 ◽  
pp. 60-68
Author(s):  
I. I. Dmitrik ◽  
G. V. Zavgorodnyaya ◽  
M. I. Pavlova ◽  
N. A. Podkorytov
Keyword(s):  
Physical Properties ◽  
Morphological Traits ◽  
Age Groups ◽  
Body Side ◽  
Low Level ◽  
Research Material ◽  
High Level ◽  
Significant Factors

A large number of works are devoted to the development of the skin and hair cover of sheep, depending on their breed affiliation, age, feeding conditions and housing. The authors point out that along with other conditions the quality of wool and wool clip is greatly influenced by the conditions of the feeding of animals. A high level of feeding increases the wool clip and improves the quality of the wool and vice versa a low level reduces, causes thinning and worsens other physical properties of the wool. As is known, one of the significant factors that determine the increase in wool clip is the size of the animal and, consequently, the total area of the skin. The purpose of the research was to investigate the morphological traits of the development of the skin and wool cover in sheep of Prikatunsky meat and wool type. The research material was wool samples from four topographic areas of the animal’s body (side/thigh/back/belly) and skin (side) of different sex and age groups, selected from the animals of the studied groups. In the course of research, the quality of wool and indicators of the histostructure of the skin of Prikatunsky meat and wool type of sheep have been investigated. In terms of thick-haired of wool, replacement rams and gimbers of Prikatunsky meat and wool type of sheep were superior by 4,82 pcs. per mm² or 19,0 % and 4,41 pcs. per mm² or 15,8 % of adult animals, respectively. Balance secondary follicles/primary follicles in young animals were higher by 10,3 and 17,3 % compared to breeding rams and ewes. The wool of the replacement young animals was thinner by 7,28 and 4,78 microns and they were more thick-haired. The obtained data will be used in the mating campaign when mating program rams in order to improve the sheep of Prikatunsky meat and wool type.

High Tc Oxide Superconductors

MRS Bulletin ◽  
1990 ◽  
Vol 15 (6) ◽  
pp. 31-33
Author(s):  
M. Brian Maple
Keyword(s):  
Physical Properties ◽  
Energy Gap ◽  
Vortex State ◽  
Oxide Superconductors ◽  
High Tc ◽  
Superconducting Energy Gap ◽  
Consistent Picture ◽  
Novel Processing ◽  
Processing Techniques

This issue of the MRS BULLETIN is devoted to high Tc superconductivity. It is the sequel to a previous series of articles on the same subject which appeared in the MRS BULLETIN in January 1989. While the articles in the January 1989 issue emphasized the families of high Tc superconducting oxides known at that rime, as well as novel processing techniques and thin films, the papers in this issue focus on the physical properties of high Tc oxide superconductors.The quality of polycrystalline and single-crystal bulk and thin-film materials has improved to the point where researchers can now make reliable measurements of many physical properties representative of the intrinsic behavior of these materials. As a result, a broad spectrum of important issues such as the nature of the electronic structure, the type of superconducting electron pairing, the magnitude and temperature dependence of the superconducting energy gap, the behavior of fluxoids in the vortex state, etc., can be addressed meaningfully. Presently emerging is a consistent picture of the physical properties of the high Tc oxides, which will form the foundation to eventually developing an appropriate theory for the normal and superconducting states of these remarkable materials.

scholarly journals The effect of using grafted seedlings on the yield and quality of tomatoes grown in greenhouses 

2018 ◽  
Vol 45 (No. 2) ◽  
pp. 76-82 ◽  
Author(s):  
Rodica Soare ◽  
Maria Dinu ◽  
Cristina Babeanu
Keyword(s):  
Fruit Quality ◽  
Vegetative Growth ◽  
Morphological Characteristics ◽  
Fruit Production ◽  
Soluble Solids ◽  
Average Weight ◽  
Appreciable Effect ◽  
Tomato Plants ◽  
Production Characteristics

This study was aimed at observing the effect of the grafting of tomato plants on morphological (vegetative growth), production and nutritive characteristics (quantity and quality of production). For this purpose, the ‘Lorely F1’ cultivar was used as a scion grafted onto the ‘Beaufort’ rootstock. Plants were cultivated with a stem and two stems. The observations collected in this study were concerned with the characteristics of plant growth. The studied morphological characteristics were plant height, stem diameter and number of leaves, and the studied production characteristics were the characteristics of fructification and productivity (the average number of fruit per plant, the average weight of the fruit, production per plant). Particular attention was paid to the nutritional characteristics of the fruit, to the fruit quality (total soluble solids, total sugar, acidity, vitamin C, antioxidant activity (by the Trolox method) and the contents of lycopene and beta-carotene). The results showed that grafting positively influenced the growth and production characteristics. Grafting of tomato plants had an appreciable effect on the vegetative growth of the variant 2-grafted tomatoes with a stem. The best option in terms of productivity and production was the variant 3-grafted tomatoes with two stems, which yielded 9.2 kg per plant. Fruit quality was not improved in any of the grafted variants. 

Transplanting improves the allometry and fiber quality of Bt cotton in cotton–wheat cropping system

2019 ◽  
Vol 56 (1) ◽  
pp. 26-36
Author(s):  
Muhammad Asghar Shah ◽  
Mubshar Hussain ◽  
Muhammad Shahzad ◽  
Khawar Jabran ◽  
Sami Ul-Allah ◽  
...  
Keyword(s):  
Fiber Length ◽  
Fiber Strength ◽  
Management Practice ◽  
Cropping Systems ◽  
Fiber Quality ◽  
Cropping System ◽  
Bt Cotton ◽  
Area Index ◽  
Fiber Fineness

AbstractIn cotton–wheat cropping system of Pakistan, wheat (Triticum aestivum L.) is harvested in late April; however, the optimum sowing time of Bt cotton is mid-March. This indicates a time difference of 4–6 weeks between the harvest of wheat and cotton sowing. It is hypothesized that this overlapping period may be managed by transplanting cotton seedlings (30–45 days old) in late April, after the harvest of wheat due to better performance of already established seedlings. To this end, this study was conducted to evaluate the allometric traits and fiber quality of transplanted Bt cotton after harvesting wheat in the cotton–wheat cropping system. The Bt cotton–wheat cropping systems were flat sown wheat (FSW)–conventionally tilled cotton, FSW–zero tilled cotton, ridge sown wheat–ridge transplanted cotton using 30- and 45-days-old seedlings, and bed sown wheat (BSW)–bed transplanted cotton (BTC) also using 30- and 45-days-old seedlings. The study was conducted at Vehari and Multan in Punjab, Pakistan. Bt cotton in BSW–BTC with 45-days-old seedlings showed better performance for allometric (leaf area index; (LAI), net assimilation rate; (NAR), and crop growth rate; (CGR)), seed cotton yield, and fiber traits (fiber uniformity, fiber length, fiber strength, and fiber fineness) in comparison to other treatments. Most of the fiber quality traits were positively correlated with allometric traits and biological yield (dry matter yield at maturity) at both locations, except correlations of CGR and LAI with fiber fineness and fiber length and NAR with fiber length. As plant growth and fiber quality of transplanted cotton was significantly higher than conventionally grown cotton, our data indicate transplanting is an interesting management practice for improving productivity in wheat–cotton cropping systems.

Sign in / Sign up

Export Citation Format

Share Document