scholarly journals A New Simple Chaotic Lorenz-Type System and Its Digital Realization Using a TFT Touch-Screen Display Embedded System

Complexity ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Rodrigo Méndez-Ramírez ◽  
Adrian Arellano-Delgado ◽  
César Cruz-Hernández ◽  
Rigoberto Martínez-Clark
Keyword(s):  
Embedded System ◽  
Chaotic System ◽  
Dynamic Properties ◽  
Thin Film Transistor ◽  
Three Dimensional ◽  
Type System ◽  
Touch Screen ◽  
Continuous Version ◽  
Digital To Analog Converters ◽  
Two Parameters

This paper presents a new three-dimensional autonomous chaotic system. The proposed system generates a chaotic attractor with the variation of two parameters. Analytical and numerical studies of the dynamic properties to generate chaos, for continuous version (CV) and discretized version (DV), for the new chaotic system (NCS) were conducted. The CV of the NCS was implemented by using an electronic circuit with operational amplifiers (OAs). In addition, the presence of chaos for DV of the NCS was proved by using the analytical and numerical degradation tests; the time series was calculated to determine the behavior of Lyapunov exponents (LEs). Finally, the DV of NCS was implemented, in real-time, by using a novel embedded system (ES) Mikromedia Plus for PIC32MX7 that includes one microcontroller PIC32 and one thin film transistor touch-screen display (TFTTSD), together with external digital-to-analog converters (DACs).

scholarly journals A New 4D Hyperchaotic System and Its Analog and Digital Implementation

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1793
Author(s):  
Rodrigo Daniel Méndez-Ramírez ◽  
Adrian Arellano-Delgado ◽  
Miguel Angel Murillo-Escobar ◽  
César Cruz-Hernández
Keyword(s):  
Embedded System ◽  
Digital Signal Processor ◽  
Dynamic Properties ◽  
Digital Signal ◽  
Hyperchaotic System ◽  
Continuous Version ◽  
Digital Implementation ◽  
Digital To Analog Converters ◽  
Numerical Studies ◽  
Point Versus

This work presents a new four-dimensional autonomous hyperchaotic system based on Méndez-Arellano-Cruz-Martínez (MACM) 3D chaotic system. Analytical and numerical studies of the dynamic properties are conducted for the new hyperchaotic system (NHS) in its continuous version (CV), where the Lyapunov exponents are calculated. The CV of the NHS is simulated and implemented using operational amplifiers (OAs), whereas the Discretized Version (DV) is simulated and implemented in real-time. Besides, a novel study of the algorithm performance of the proposed DV of NHS is conducted with the digital-electronic implementation of the floating-point versus Q1.15 fixed-point format by using the Digital Signal Processor (DSP) engine of a 16-bit dsPIC microcontroller and two external dual digital to analog converters (DACs) in an embedded system (ES).

A New 3D Cubic Chaotic System and its Circuitry Implementation

2011 ◽  
Vol 130-134 ◽  
pp. 3924-3927
Author(s):  
Wei Deng ◽  
Yan Feng Wang ◽  
Jie Fang
Keyword(s):  
Theoretical Analysis ◽  
Chaotic System ◽  
Electronic Circuit ◽  
Nonlinear Term ◽  
Dynamic Properties ◽  
Three Dimensional ◽  
Lyapunov Dimension ◽  
New Chaotic System ◽  
Lyapunov Exponent Spectrum ◽  
New System

A new three-dimensional cubic chaotic system is reported. This new system contains five system parameters and each equation contains nonlinear term. Moreover, two equations of nonlinear term is cubic. The basic properties of the new system are investigated via theoretical analysis, numerical simulation, Lyapunov exponent spectrum, bifurcation diagram, Lyapunov dimension and Poincare diagram. The different dynamic behaviors of the new system are analyzed when each system parameter is changed .An electronic circuit was designed to realize the new chaotic system. Experimental chaotic behaviors of the system were found to be identical to the dynamic properties predicted by theoretical analysis and numerical simulations.

scholarly journals A New Chaotic System with Stable Equilibrium: Entropy Analysis, Parameter Estimation, and Circuit Design

Entropy ◽  
2018 ◽  
Vol 20 (9) ◽  
pp. 670 ◽  
Author(s):  
Tomasz Kapitaniak ◽  
S. Mohammadi ◽  
Saad Mekhilef ◽  
Fawaz Alsaadi ◽  
Tasawar Hayat ◽  
...  
Keyword(s):  
Parameter Estimation ◽  
Circuit Design ◽  
Chaotic System ◽  
Stable Equilibrium ◽  
Dynamic Properties ◽  
Three Dimensional ◽  
Equilibrium Analysis ◽  
Entropy Analysis ◽  
New Chaotic System ◽  
Multistable Systems

In this paper, we introduce a new, three-dimensional chaotic system with one stable equilibrium. This system is a multistable dynamic system in which the strange attractor is hidden. We investigate its dynamic properties through equilibrium analysis, a bifurcation diagram and Lyapunov exponents. Such multistable systems are important in engineering. We perform an entropy analysis, parameter estimation and circuit design using this new system to show its feasibility and ability to be used in engineering applications.

Applications of Scanning Microscopy in Biomedical Research

1968 ◽  
Vol 26 ◽  
pp. 354-355
Author(s):  
T. L. Hayes
Keyword(s):  
Information Content ◽  
Biomedical Research ◽  
Biomedical Applications ◽  
Three Dimensional ◽  
Dental Enamel ◽  
Resolving Power ◽  
Whole Mount ◽  
Two Parameters ◽  
Content Information ◽  
Sectioned Tissue

Biomedical applications of the scanning electron microscope (SEM) have increased in number quite rapidly over the last several years. Studies have been made of cells, whole mount tissue, sectioned tissue, particles, human chromosomes, microorganisms, dental enamel and skeletal material. Many of the advantages of using this instrument for such investigations come from its ability to produce images that are high in information content. Information about the chemical make-up of the specimen, its electrical properties and its three dimensional architecture all may be represented in such images. Since the biological system is distinctive in its chemistry and often spatially scaled to the resolving power of the SEM, these images are particularly useful in biomedical research.In any form of microscopy there are two parameters that together determine the usefulness of the image. One parameter is the size of the volume being studied or resolving power of the instrument and the other is the amount of information about this volume that is displayed in the image. Both parameters are important in describing the performance of a microscope. The light microscope image, for example, is rich in information content (chemical, spatial, living specimen, etc.) but is very limited in resolving power.

scholarly journals Fast Overlap Detection between Hard-Core Colloidal Cuboids and Spheres. The OCSI Algorithm

Algorithms ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 72
Author(s):  
Luca Tonti ◽  
Alessandro Patti
Keyword(s):  
Colloidal Particles ◽  
Dynamic Properties ◽  
Wide Spectrum ◽  
Three Dimensional ◽  
Hard Core ◽  
Detection Algorithm ◽  
Three Dimensional Objects ◽  
Aggregation Behaviour ◽  
Sphere Radius ◽  
User Friendly

Collision between rigid three-dimensional objects is a very common modelling problem in a wide spectrum of scientific disciplines, including Computer Science and Physics. It spans from realistic animation of polyhedral shapes for computer vision to the description of thermodynamic and dynamic properties in simple and complex fluids. For instance, colloidal particles of especially exotic shapes are commonly modelled as hard-core objects, whose collision test is key to correctly determine their phase and aggregation behaviour. In this work, we propose the Oriented Cuboid Sphere Intersection (OCSI) algorithm to detect collisions between prolate or oblate cuboids and spheres. We investigate OCSI’s performance by bench-marking it against a number of algorithms commonly employed in computer graphics and colloidal science: Quick Rejection First (QRI), Quick Rejection Intertwined (QRF) and a vectorized version of the OBB-sphere collision detection algorithm that explicitly uses SIMD Streaming Extension (SSE) intrinsics, here referred to as SSE-intr. We observed that QRI and QRF significantly depend on the specific cuboid anisotropy and sphere radius, while SSE-intr and OCSI maintain their speed independently of the objects’ geometry. While OCSI and SSE-intr, both based on SIMD parallelization, show excellent and very similar performance, the former provides a more accessible coding and user-friendly implementation as it exploits OpenMP directives for automatic vectorization.

scholarly journals Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 444
Author(s):  
Guoning Si ◽  
Liangying Sun ◽  
Zhuo Zhang ◽  
Xuping Zhang
Keyword(s):  
Degrees Of Freedom ◽  
Dynamic Properties ◽  
Three Dimensional ◽  
Polyimide Film ◽  
Zebrafish Embryos ◽  
Multiple Degrees Of Freedom ◽  
Electrothermal Actuator ◽  
3D Space ◽  
Pick And Place

This paper presents the design, fabrication, and testing of a novel three-dimensional (3D) three-fingered electrothermal microgripper with multiple degrees of freedom (multi DOFs). Each finger of the microgripper is composed of a V-shaped electrothermal actuator providing one DOF, and a 3D U-shaped electrothermal actuator offering two DOFs in the plane perpendicular to the movement of the V-shaped actuator. As a result, each finger possesses 3D mobilities with three DOFs. Each beam of the actuators is heated externally with the polyimide film. The durability of the polyimide film is tested under different voltages. The static and dynamic properties of the finger are also tested. Experiments show that not only can the microgripper pick and place microobjects, such as micro balls and even highly deformable zebrafish embryos, but can also rotate them in 3D space.

A MODIFIED GENERALIZED LORENZ-TYPE SYSTEM AND ITS CANONICAL FORM

2009 ◽  
Vol 19 (06) ◽  
pp. 1931-1949 ◽  
Author(s):  
QIGUI YANG ◽  
KANGMING ZHANG ◽  
GUANRONG CHEN
Keyword(s):  
Special Form ◽  
Topological Structure ◽  
Complex Dynamics ◽  
Type System ◽  
Chaotic Attractors ◽  
Hopf Bifurcations ◽  
Compound Structure ◽  
Two Parameters ◽  
First Time ◽  
New System

In this paper, a modified generalized Lorenz-type system is introduced, which is state-equivalent to a simple and special form, and is parameterized by two parameters useful for chaos turning and system classification. More importantly, based on the parameterized form, two classes of new chaotic attractors are found for the first time in the literature, which are similar but nonequivalent in topological structure. To further understand the complex dynamics of the new system, some basic properties such as Lyapunov exponents, Hopf bifurcations and compound structure of the attractors are analyzed and demonstrated with careful numerical simulations.

Nonlinear Dynamics and Application of the Four Dimensional Autonomous Hyper-Chaotic System

2014 ◽  
Author(s):  
Ge Kai ◽  
Wei Zhang
Keyword(s):  
Nonlinear Dynamics ◽  
Numerical Simulation ◽  
Differential Equations ◽  
Chaotic System ◽  
Dynamical Behavior ◽  
Three Dimensional ◽  
Phase Portraits ◽  
State Variables ◽  
Chaotic Motions ◽  
Finance System

In this paper, we establish a dynamic model of the hyper-chaotic finance system which is composed of four sub-blocks: production, money, stock and labor force. We use four first-order differential equations to describe the time variations of four state variables which are the interest rate, the investment demand, the price exponent and the average profit margin. The hyper-chaotic finance system has simplified the system of four dimensional autonomous differential equations. According to four dimensional differential equations, numerical simulations are carried out to find the nonlinear dynamics characteristic of the system. From numerical simulation, we obtain the three dimensional phase portraits that show the nonlinear response of the hyper-chaotic finance system. From the results of numerical simulation, it is found that there exist periodic motions and chaotic motions under specific conditions. In addition, it is observed that the parameter of the saving has significant influence on the nonlinear dynamical behavior of the four dimensional autonomous hyper-chaotic system.

scholarly journals Ultimate Bound of a 3D Chaotic System and Its Application in Chaos Synchronization

2014 ◽  
Vol 2014 ◽  
pp. 1-9
Author(s):  
Jiezhi Wang ◽  
Qing Zhang ◽  
Zengqiang Chen ◽  
Hang Li
Keyword(s):  
Chaotic System ◽  
Chaos Synchronization ◽  
Three Dimensional ◽  
Boundary Region ◽  
Cross Product ◽  
State Equation ◽  
Linear Coefficient ◽  
Analytical Expression ◽  
Product Term ◽  
Cross Product Term

Two ellipsoidal ultimate boundary regions of a special three-dimensional (3D) chaotic system are proposed. To this chaotic system, the linear coefficient of theith state variable in theith state equation has the same sign; it also has two one-order terms and one quadratic cross-product term in each equation. A numerical solution and an analytical expression of the ultimate bounds are received. To get the analytical expression of the ultimate boundary region, a new result of one maximum optimization question is proved. The corresponding ultimate boundary regions are demonstrated through numerical simulations. Utilizing the bounds obtained, a linear controller is proposed to achieve the complete chaos synchronization. Numerical simulation exhibits the feasibility of the designed scheme.

HYPERCHAOS IN THE FRACTIONAL-ORDER NONAUTONOMOUS CHEN'S SYSTEM AND ITS SYNCHRONIZATION

2005 ◽  
Vol 16 (05) ◽  
pp. 815-826 ◽  
Author(s):  
HONGBIN ZHANG ◽  
CHUNGUANG LI ◽  
GUANRONG CHEN ◽  
XING GAO
Keyword(s):  
Numerical Simulations ◽  
Fractional Order ◽  
Chaotic System ◽  
Three Dimensional ◽  
Synchronization Problem ◽  
Driving Signal

Recently, a new hyperchaos generator, obtained by controlling a three-dimensional autonomous chaotic system — Chen's system — with a periodic driving signal, has been found. In this letter, we formulate and study the hyperchaotic behaviors in the corresponding fractional-order hyperchaotic Chen's system. Through numerical simulations, we found that hyperchaos exists in the fractional-order hyperchaotic Chen's system with order less than 4. The lowest order we found to have hyperchaos in this system is 3.4. Finally, we study the synchronization problem of two fractional-order hyperchaotic Chen's systems.

Sign in / Sign up

Export Citation Format

Share Document