scholarly journals Optimization of Extraction Process for Antidiabetic and Antioxidant Activities of Kursi Wufarikun Ziyabit Using Response Surface Methodology and Quantitative Analysis of Main Components

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Salamet Edirs ◽  
Ablajan Turak ◽  
Sodik Numonov ◽  
Xuelei Xin ◽  
Haji Akber Aisa
Keyword(s):  
Response Surface Methodology ◽  
Quantitative Analysis ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Inhibition Rate ◽  
Main Components ◽  
Ptp 1B

By using extraction yield, total polyphenolic content, antidiabetic activities (PTP-1B and α-glycosidase), and antioxidant activity (ABTS and DPPH) as indicated markers, the extraction conditions of the prescription Kursi Wufarikun Ziyabit (KWZ) were optimized by response surface methodology (RSM). Independent variables were ethanol concentration, extraction temperature, solid-to-solvent ratio, and extraction time. The result of RSM analysis showed that the four variables investigated have a significant effect (p<0.05) for Y1, Y2, Y3, Y4, and Y5 with R2 value of 0.9120, 0.9793, 0.9076, 0.9125, and 0.9709, respectively. Optimal conditions for the highest extraction yield of 39.28%, PTP-1B inhibition rate of 86.21%, α-glycosidase enzymes inhibition rate of 96.56%, and ABTS inhibition rate of 77.38% were derived at ethanol concentration 50.11%, extraction temperature 72.06°C, solid-to-solvent ratio 1 : 22.73 g/mL, and extraction time 2.93 h. On the basis of total polyphenol content of 48.44% in this optimal condition, the quantitative analysis of effective part of KWZ was characterized via UPLC method, 12 main components were identified by standard compounds, and all of them have shown good regression within the test ranges and the total content of them was 11.18%.

scholarly journals Homogenate Extraction of Crocins from Saffron Optimized by Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Yingpeng Tong ◽  
Yu Jiang ◽  
Dan Guo ◽  
Yongqiu Yan ◽  
Shiping Jiang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Extraction Time ◽  
Process Conditions ◽  
Extraction Temperature ◽  
Single Factor ◽  
Extraction Voltage ◽  
Homogenate Extraction

Saffron, which has many kinds of biological activities, has been widely used in medicine, cosmetics, food, and other fields of health promotion industries. Crocins are the main component of saffron (Crocus sativus L.). At present, most of the extraction methods for crocins require long time or special instruments to complete the process and some of them are not suitable for industrial production at present. In this article, homogenate extraction technology which is a convenient and efficient method was developed for crocins extraction from saffron. Firstly, the influences of extraction voltage, extraction time, ethanol concentration, and temperature on crocins yield were studied by single factor experiments; and then response surface methodology (RSM) was used to optimize levels of four variables based on the result of single factor experiments. Results showed that the optimum extraction process conditions for crocins were as follows: extraction voltage, 110 V; ethanol concentration, 70%; extraction temperature, 57°C; and extraction time, 40 s. Based on these conditions, the extraction yield of crocins can reach 22.76% which is higher than ultrasonic extraction method. Therefore, homogenate extraction is an effective way to extract crocins from saffron with higher extraction yield and shorter extraction time.

scholarly journals Optimisation of microwave-assisted extraction of flavonoids and phenolics from celery (Apium graveolens L.) leaves by response surface methodology

2016 ◽  
Vol 34 (No. 4) ◽  
pp. 341-349 ◽  
Author(s):  
Q. He ◽  
Y. Li ◽  
P. Zhang ◽  
A. Zhang ◽  
H. Wu
Keyword(s):  
Antioxidant Activity ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Apium Graveolens ◽  
Solvent Ratio ◽  
Microwave Assisted Extraction ◽  
Inhibition Rate ◽  
Microwave Assisted ◽  
Assisted Extraction

The conditions for microwave-assisted extraction (MAE) of total flavonoids (TF) and total phenols (TP), and antioxidant activity from celery (Apium graveolens L.) leaves by response surface methodology (RSM) were optimised. The 3-level, 3-factorial Box-Behnken design (BBD) was employed to study three main extraction conditions: microwave power (300–500 W), solid-solvent ratio (15–30 ml/g), and ethanol concentration (50–80%). It was found that microwave power of 500 W at 30 ml/g solid-solvent ratio with 75.6% (v/v) ethanol concentration was the most optimum conditions for the extraction of TF and TP from celery leaves with the consequent high antioxidant activity measured by the DPPH inhibition rate. Using the optimum extraction conditions, the extraction yields of TF and TP were 0.62 g RUE/100 g DW, 3.01 g GAE/100 g DW, respectively, and the DPPH inhibition rate was 88%. The results indicated that the nutritional quality of celery (Apium graveolens L.) leaves could be improved significantly by optimising the extraction process of MAE using response surface methodology.

scholarly journals Optimization of Ultrasound-Assisted Extraction of Phenolics from Sideritis raeseri Using Response Surface Methodology

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3949
Author(s):  
Katarina Šavikin ◽  
Jelena Živković ◽  
Teodora Janković ◽  
Nada Ćujić-Nikolić ◽  
Gordana Zdunić ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Time ◽  
Total Phenolic ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted

In this study we define the optimal conditions for ultrasound-assisted extraction of bioactive polyphenols from S. raeseri aerial parts using response surface methodology. The influence of ethanol concentration (10–90%), extraction temperature (20–80 °C), extraction time (10–60 min), and solid-to-solvent ratio (1:10–1:50) on total phenolic content as well as on content of individual flavonoids, and hypolaetin and isoscutellarein derivatives was studied. For the experimental design, a central composite design was chosen. In the obtained extracts, the following ranges of targeted compounds were detected: total phenol from 19.32 to 47.23 mg GAE/g dw, HYP from 1.05 to 11.46 mg/g dw, ISC 1 from 0.68 to 10.68 mg/g dw, and ISC 2 from 0.74 to 15.56 mg/g dw. The optimal extraction conditions were set as: ethanol concentration of 65%, extraction time of 50 min, extraction temperature of 63 °C, and solid-to-solvent ratio of 1:40. Contents of TP, HYP, ISC 1, and ISC 2 in optimal extracts were 47.11 mg GAE/g dw, 11.73 mg/g dw, 9.54 mg/g dw, and 15.40 mg/g dw, respectively. Experimentally set values were in good agreement with those predicted by the response surface methodology model, indicating suitability of the used model, as well as the success of response surface methodology in optimizing the conditions of the extraction.

Optimization of Extraction of Tannins from Banana Peel Using Response Surface Methodology

2014 ◽  
Vol 678 ◽  
pp. 566-571
Author(s):  
Ting Ru Wu ◽  
Hong Ling Wang ◽  
Shi Wen Jiang ◽  
Dan Dan Liu ◽  
Fei Wei
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Extraction Time ◽  
Banana Peel ◽  
Extraction Temperature ◽  
Liquid Ratio ◽  
Optimized Conditions ◽  
Tannin Extraction

Response surface methodology (RSM) was employed to optimize the extraction conditions of tannins from banana peels. Based on the single-factor experiments, four independent variables including ethanol concentration, solid to liquid ratio, extraction time and extraction temperature were selected as affecting factors. According to central composite design (CCD) the four factor, five levels experiments were carried out with the tannin extraction yield as evaluation index. The results show that the optimized conditions are as follows: ethanol concentration of 75.44%, solid to liquid ratio of 1:35.34, extraction time of 7.94 h, extraction temperature of 62.85°C. Under the optimized conditions, the predicted tannin extraction yield reaches 58.55%, while the actual extraction yield is 57.42% with the relative error of 1.13%.

Optimization of the Ultrasonic Extraction of Gypenoside III from Gynostemma pentaphyllum by Response Surface Methodology

2012 ◽  
Vol 550-553 ◽  
pp. 1866-1870
Author(s):  
Xiao Dan Tang ◽  
Hai Yang Hang ◽  
Shao Yan Wang ◽  
Jing Xiang Cong
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Yield ◽  
Raw Material ◽  
Extraction Temperature ◽  
Optimal Conditions ◽  
Gynostemma Pentaphyllum ◽  
Bioactive Component ◽  
Yield Value ◽  
Ultrasonic Time

Gypenosides III is a major bioactive component which is rich in Gynostemma pentaphyllum. For better utilization of the native resource, response surface methodology was used to optimize the extraction conditions of gypenosides III from G. pentaphyllum. The effects of three independent variables on the extraction yield of gypenosides III were investigated and the optimal conditions were evaluated by means of Box-Behnken design. The optimal conditions are as follows: ratio of ethanol to raw material 25, extraction temperature 58°C and ultrasonic time 25min. Under these conditions, the yield of gypenoside III is 1.216±0.05%, which is agreed closely with the predicted yield value.

scholarly journals Optimization of Supercritical Carbon Dioxide Extraction of Quercus infectoria Oil

2015 ◽  
Vol 74 (7) ◽  
Author(s):  
Liza Md Salleh ◽  
Stashia ELeaness Rosland Abel ◽  
Gholamreza Zahedi ◽  
Russly Abd Rahman ◽  
Hasmida Mohd Nasir ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Goodness Of Fit ◽  
Maximum Yield ◽  
Extraction Yield ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Predicted Values ◽  
Artificial Neural Network Ann ◽  
Quercus Infectoria

This current study focuses on the modelling and optimization of supercritical fluid extraction of Quercus infectoria galls oil. In this case, response surface methodology (RSM) and artificial neural network (ANN) were applied for the modelling and prediction of extraction yield of galls oil. A 17-run Box-Behnken Design (BBD) was employed to statistically optimize the process parameters of SC-CO2 extraction of Quercus infectoria galls at a condition as follows: pressure (5000, 6000, 7000 Psi), temperature (40, 50, 60°C) and extraction time (30, 45, 60 min). The maximum yield of the extracted oil is1.12 % and the optimum conditions are at an extraction pressure of 5574 Psi; extraction temperature of 75°C and extraction time of 54 min. Under the optimal conditions, the experimental results agree with the predicted values obtained through analysis of variance (ANOVA). This indicates a successful response surface methodology and highly satisfactory goodness of fit of the model used. The analysis of experimental design for process optimization results demonstrates that temperature and extraction time are the main parameters that influence the oil extraction of Quercus infectoria.

scholarly journals Effects of Time, Temperature, and Solvent Ratio on the Extraction of Non-Extractable Polyphenols with Anticancer Activity of Barhi Date Palm Kernels Extracts Using Response Surface Methodology

2019 ◽  
Author(s):  
Israa Mahmud ◽  
Mohamed E. S. Mirghani ◽  
Faridah Yusof ◽  
Ma'an Al-khatib
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Date Palm ◽  
Antioxidant Activities ◽  
Radical Scavenging ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Dietary Polyphenols ◽  
Experimental Values

Dietary polyphenols exist in two forms; extractable polyphenols (EPP) or compounds solubilised by aqueous/organic solvents, and non-extractable polyphenols (NEPP) or compounds remain in the corresponding residues after the extraction. At present, most researchers focus on EEP fractions, while NEPP is neglected. Thus, this study aimed to release NEPP from the remaining powder residue of Barhi date palm kernels (BDPK) with acid hydrolysis. The related extraction conditions were determined and optimised using response surface methodology (RSM) for maximisation of NEPP with highest cytotoxic and antioxidant activities. The face-centred central composite design (FCCCD) was used to establish treatments based on three independent variables, namely; extraction temperature, time, and solvent/sample ratio. Under the optimal conditions, the experimental values for DPPH radical-scavenging capacity of NEPP (IC50=57.52µg/mL), and cytotoxicity of NEPP against A549 and HT29 cells were IC50=17.4 µg/mL and 31.4µg/mL, respectively. The experimental values were in agreement with those predicted by RSM models, confirming the suitability of the model employed and the success of RSM for optimisation of the extraction conditions for NEPP from BDPK. These results indicate that NEPP from industrial date fruit waste could be a promising candidate as natural antioxidants with significant antiproliferation effect against A549 and HT29 cancer cells in-vitro.

Optimization of Crude Polysaccharides Extraction from Plantago ovata Forsk Seed by Response Surface Methodology

2020 ◽  
Vol 16 (3) ◽  
pp. 354-363
Author(s):  
Ehsan Sadeghi ◽  
Reza Mohammadi ◽  
Mohammad H. Shirgardoun ◽  
Fatemeh Askari ◽  
Masoumeh Taghizadeh ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Food Packaging ◽  
Polynomial Equation ◽  
Edible Films ◽  
Extraction Yield ◽  
Raw Material ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Plantago Ovata

Background: Plantago ovata Forsk (Psyllium seed) is an annual plant of plantago genus. This plant widely grows in India and Iran. The Psyllium seed contains mucilage, protein, sugar, fat and tannins. Seed’s husk is a known source to extract hydrocolloid. Objective: The aim of this study was to optimize gum extraction from the Psyllium seed. Methods: The response surface methodology (RSM) was used to estimate the effect of independent variables on the extraction yield of Psyllium gum. The obtained experimental data were fitted to a second- order polynomial equation using multiple regression analysis and analyzed by appropriate statistical methods. A central composite design (CCD) was used for experimental design and analysis of the results to obtain the best possible combination of extraction temperature (X1= 60-80°C), extraction time (X2= 1-3 h), and the ratio of water to raw material (X3= 30-70%) for the maximum gum extraction. Results: Optimum extraction conditions were extraction temperature of 79°C, extraction time of 2.5 h, and the ratio of water to the raw material of 57%. The experimental extraction yield under optimal conditions was found to be 9 ± 0.25%, which was in agreement with the predicted value of 9.4%. Conclusion: This study showed that Psyllium gum can be used as a hydrocolloid source for pharmaceutical and food industry such as edible films for food packaging.

Optimization of Ultrasonic-Assisted Extraction for Pinocembrin from Flos populi Using Response Surface Methodology

2017 ◽  
Vol 13 (5) ◽  
Author(s):  
Zunlai Sheng ◽  
Biying Wang ◽  
Jiahong Zhao ◽  
Wenhui Yu
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Time ◽  
Surface Model ◽  
Extraction Temperature ◽  
Acoustic Intensity ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasonic Assisted

Abstract In this study, the ultrasound-assisted extraction (UAE) was used for extraction of pinocembrin from Flos populi. Based on the results of the single-factor experiment, four independent parameters, including ethanol concentration (40–80 %), extraction temperature (50–70 °C), extraction time (25–45 min) and electrical acoustic intensity (40.8–81.5 W/m2) were further investigated using response surface methodology (RSM) coupled with Box-Behnken design. The experimental data were fitted to the quadratic response surface model using multiple regression analysis with high adjusted determination coefficient value (R 2) of 0.9697. The highest yield (134.2 ± 1.53 mg/g) of pinocembrin was obtained under the optimal conditions (ethanol concentration of 68 %, extraction temperature of 69 °C, extraction time of 42 min and electrical acoustic intensity of 66.81 W/cm2), which agreed to the predicted value of 132.9 mg/g. Moreover, the comparison between the UAE and reflux extraction also showed the suitability of UAE for pinocembrin from Flos populi.

Optimization of Extraction Process of Lycopene from Watermelon (Citrullus lanatus) by Response Surface Methodology

2011 ◽  
Vol 140 ◽  
pp. 385-393 ◽  
Author(s):  
Xian Feng Shi ◽  
Yuan Xu ◽  
Yu Hua Li ◽  
Hong Xia Zeng ◽  
Yu Hong Sun
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Citrullus Lanatus ◽  
Extraction Process ◽  
Quadratic Equation ◽  
Raw Material ◽  
Extraction Time ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Extraction Solvent

The extraction processing of lycopene from watermelon was investigated in this paper. Based on single factor experiments, response surface methodology (RSM) was adopted to study the key parameters such as number of extraction, extraction temperature, extraction time in order to increase extraction rate of lycopene. A second order quadratic equation was established and the applicability of model and interaction involved factors on predicting the lycopene extracting content was verified. The results indicated that the optimum extraction conditions were hexane (containing 2% dichloromethane) as extraction solvent, ratio of solvent to raw material of 3:1 (mL/g), number of extraction of 2, extraction time of 1.9 h and extraction temperature of 29.8°C. Under these conditions the extracting content of lycopene was 14.71±0.22 mg/kg, which is well in agreement with value predicted by the model.

Sign in / Sign up

Export Citation Format

Share Document