scholarly journals The Applications of Finite Element Analysis in Proximal Humeral Fractures

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Yongyu Ye ◽  
Wei You ◽  
Weimin Zhu ◽  
Jiaming Cui ◽  
Kang Chen ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Glenohumeral Joint ◽  
State Of The Art ◽  
Review Article ◽  
Proximal Humeral Fractures ◽  
Humeral Fractures ◽  
Noninvasive Method ◽  
Element Analysis ◽  
Geriatric Population

Proximal humeral fractures are common and most challenging, due to the complexity of the glenohumeral joint, especially in the geriatric population with impacted fractures, that the development of implants continues because currently the problems with their fixation are not solved. Pre-, intra-, and postoperative assessments are crucial in management of those patients. Finite element analysis, as one of the valuable tools, has been implemented as an effective and noninvasive method to analyze proximal humeral fractures, providing solid evidence for management of troublesome patients. However, no review article about the applications and effects of finite element analysis in assessing proximal humeral fractures has been reported yet. This review article summarized the applications, contribution, and clinical significance of finite element analysis in assessing proximal humeral fractures. Furthermore, the limitations of finite element analysis, the difficulties of more realistic simulation, and the validation and also the creation of validated FE models were discussed. We concluded that although some advancements in proximal humeral fractures researches have been made by using finite element analysis, utility of this powerful tool for routine clinical management and adequate simulation requires more state-of-the-art studies to provide evidence and bases.

Biomechanical Principles Used in Finite Element Analysis for Proximal Humeral Fractures with Locking Plates

2017 ◽  
Vol 58 ◽  
pp. 128-136 ◽  
Author(s):  
Ismael Mendoza-Muñoz ◽  
Álvaro González-Ángeles ◽  
Miriam Siqueiros-Hernández ◽  
Mildrend Montoya-Reyes
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Proximal Humeral Fractures ◽  
Humeral Fractures ◽  
Locking Plates ◽  
Element Analysis

scholarly journals Application of a Lateral Intertubercular Sulcus Plate in the Treatment of Proximal Humeral Fractures: a Finite Element Analysis and Example in Clinical Practice

2021 ◽  
Author(s):  
Dong Li ◽  
WenXue Lv ◽  
WenMing Chen ◽  
Jing Meng ◽  
Song Liu ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Locking Plate ◽  
Proximal Humeral Fractures ◽  
Humeral Fractures ◽  
Element Analysis ◽  
Computed Tomography Images ◽  
Medial Support ◽  
Philos Plate ◽  
Intertubercular Sulcus

Abstract Background: Inversion deformities caused by insufficient medial support are especially common when the PHILOS locking plate is used to treat proximal humeral fractures. Using finite element analysis, the present study aimed to compare the biomechanical properties of a PHILOS locking plate (PLP) and a PHILOS plate combined with a lateral intertubercular sulcus plate (PLP-LSP) in the fixation of proximal humeral fractures with loss of the medial column. We also present representative results for a 69-year-old female patient with a comminuted fracture of the proximal right humerus (Neer type four-part fracture) who underwent successful surgical treatment with a PHILOS plate combined with an auxiliary lateral intertubercular sulcus plate. Methods: After creating a three-dimensional finite element model of proximal humeral fracture with loss of the medial column, three implant models were established. A full-screw PHILOS plate (PLP) was used in Group A, while a PHILOS plate lacking medial screw support and an auxiliary plate were used in Group B (MPLP-LSP). A full-screw PHILOS plate and auxiliary plate were used in Group C (PLP-LSP). The three fixation models were applied to the proximal humerus fracture model, following which horizontal, compressive, and rotational loads were applied to the humerus model. We evaluated the structural stiffness and stress distribution of the implant and compared displacement and angle changes among the three models. Results: Displacement and angle changes were smallest in Group C (PLP-LSP). The implant model used in Group C also had the highest structural rigidity, endured less von Misses stress than the other two models , and had the strongest stability. In our clinical case, X-ray and computed tomography images obtained 3 months after the operation indicated that the fracture had healed, with good positioning of internal fixation and good functional recovery.Conclusion: A lateral intertubercular sulcus plate placed at the internodal grove not only aids in anatomical reduction but also provides effective lateral and medial support, thereby reducing stress on the PHILOS plate and providing better stability in patients with proximal humeral fractures.

Advancement in the Application of Finite Element Analysis to the Optimization of Composite Yacht Structures

2011 ◽  
Author(s):  
David Fornaro
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Composite Structures ◽  
State Of The Art ◽  
Load Case ◽  
Post Processing ◽  
Principal Stresses ◽  
Element Analysis ◽  
Current State ◽  
Case Development

Finite Element Analysis (FEA) is mature technology that has been in use for several decades as a tool to optimize structures for a wide variety of applications. Its application to composite structures is not new, however the technology for modeling and analyzing the behavior of composite structures continues to evolve on several fronts. This paper provides a review of the current state-of-the-art with regard to composites FEA, with a particular emphasis on applications to yacht structures. Topics covered are divided into three categories: Pre-processing; Postprocessing; and Non-linear Solutions. Pre-processing topics include meshing, ply properties, laminate definitions, element orientations, global ply tracking and load case development. Post-processing topics include principal stresses, failure indices and strength ratios. Nonlinear solution topics include progressive ply failure. Examples are included to highlight the application of advanced finite element analysis methodologies to the optimization of composite yacht structures.

Finite Element Analysis of Hyperelastic Components

1998 ◽  
Vol 51 (5) ◽  
pp. 303-320 ◽  
Author(s):  
D. W. Nicholson ◽  
N. W. Nelson ◽  
B. Lin ◽  
A. Farinella
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Recent Literature ◽  
Constitutive Models ◽  
Review Article ◽  
Considerable Extent ◽  
Arc Length ◽  
Numerical Techniques ◽  
Element Analysis ◽  
Current Review

Finite element analysis of hyperelastic components poses severe obstacles owing to features such as large deformation and near-incompressibility. In recent years, outstanding issues have, to a considerable extent, been addressed in the form of the hyperelastic element available in commercial finite element codes. The current review article, which updates and expands a 1990 article in Rubber Reviews, is intended to serve as a brief exposition and selective survey of the recent literature. Published simulations are listed. Rubber constitutive models and the measurement of their parameters are addressed. The underlying incremental variational formulation is sketched for thermomechanical response of compressible, incompressible and near-incompressible elastomers. Coupled thermomechanical effects and broad classes of boundary conditions, such as variable contact, are encompassed. Attention is given to advanced numerical techniques such as arc length methods. Remaining needs are assessed. This review article contains 142 references.

scholarly journals Long, elliptically bent, active X-ray mirrors with slope errors <200 nrad

2017 ◽  
Vol 24 (3) ◽  
pp. 615-621 ◽  
Author(s):  
Ioana T. Nistea ◽  
Simon G. Alcock ◽  
Paw Kristiansen ◽  
Adam Young
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Free Electron Laser ◽  
State Of The Art ◽  
Optical Metrology ◽  
Optical Surface ◽  
High Quality ◽  
Element Analysis ◽  
Bending Performance ◽  
X Ray

Actively bent X-ray mirrors are important components of many synchrotron and X-ray free-electron laser beamlines. A high-quality optical surface and good bending performance are essential to ensure that the X-ray beam is accurately focused. Two elliptically bent X-ray mirror systems from FMB Oxford were characterized in the optical metrology laboratory at Diamond Light Source. A comparison of Diamond-NOM slope profilometry and finite-element analysis is presented to investigate how the 900 mm-long mirrors sag under gravity, and how this deformation can be adequately compensated using a single, spring-loaded compensator. It is shown that two independent mechanical actuators can accurately bend the trapezoidal substrates to a range of elliptical profiles. State-of-the-art residual slope errors of <200 nrad r.m.s. are achieved over the entire elliptical bending range. High levels of bending repeatability (ΔR/R = 0.085% and 0.156% r.m.s. for the two bending directions) and stability over 24 h (ΔR/R = 0.07% r.m.s.) provide reliable beamline performance.

Sign in / Sign up

Export Citation Format

Share Document