scholarly journals A Novel L-Shape Ultra Wideband Chipless Radio-Frequency Identification Tag

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Khaled Issa ◽  
Muhammad A. Ashraf ◽  
Mohammed R. AlShareef ◽  
Hatim Behairy ◽  
Saleh Alshebeili ◽  
...  
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Measurement Data ◽  
Ultra Wideband ◽  
Spectral Signature ◽  
Rfid Tag ◽  
High Data ◽  
Frequency Identification ◽  
Dual Polarized ◽  
5 Ghz

A novel compact dual-polarized-spectral-signature-based chipless radio-frequency identification (RFID) tag is presented. Specifically, an L-shape resonator-based structure is optimized to have different spectral signatures in both horizontal and vertical polarizations, in order to double the encoding capacity. Resonators’ slot width and the space between closely placed resonators are also optimized to enhance the mutual coupling, thereby helping in achieving high-data encoding density. The proposed RFID tag operates over 5 GHz to 10 GHz frequency band. As a proof of concept, three different 18-bit dual-polarized RFID tags are simulated, fabricated, and tested in an anechoic chamber environment. The measurement data show reasonable agreement with the simulation results, with respect to resonators’ frequency positions, null depth, and their bandwidth over the operational spectrum.

Design of Circular Patch Microstrip Antenna with Egg Slot for 2.4 GHz Ultra-Wideband Radio Frequency Identification (UWB RFID) Tag Applications

2014 ◽  
Vol 513-517 ◽  
pp. 3414-3418 ◽  
Author(s):  
Yuwono Rudy ◽  
Dwi A. Wahyu ◽  
Fauzan Edy P. Muhammad
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
White Paper ◽  
Ultra Wideband ◽  
Rfid Tag ◽  
Circular Patch ◽  
Frequency Identification ◽  
Circular Microstrip Antenna

This paper discusses concerning design of circular patch microstrip antenna for Radio Frequency Identification (RFID) tags application in microwave band. Circular microstrip antenna is designed with an egg slot on the ground plane and feed line to get ultra wideband. The design of microstrip antenna using Phenolic White Paper-FR2 with dielectric constant (or) =4.5. Based on simulation results, the antenna shows it works at frequency 2128-4807 MHz with gain of-17,398 dBi. The rectangular stub, caused the decreasing of bandwidth but the gain increase. By adding a rectangular stub on the ground plane, antenna works at frequency 1166 3475 MHz with increasing gain of-2,733 dBi.

scholarly journals On the application of the EM-imaging for chipless RFID tags

2015 ◽  
Vol 2 (2) ◽  
pp. 86-96 ◽  
Author(s):  
M. Zomorrodi ◽  
N.C. Karmakar
Keyword(s):  
Radio Frequency Identification ◽  
Low Cost ◽  
60 Ghz ◽  
Rfid Tag ◽  
High Data ◽  
Data Encoding ◽  
Bending Effect ◽  
Chipless Rfid ◽  
Frequency Identification ◽  
Cost Item

The electromagnetic (EM) imaging technique at mm-band 60 GHz is proposed for data encoding purpose in the chipless Radio Frequency Identification (RFID) systems. The fully printable chipless RFID tag comprises tiny conductive EM polarizers to create high cross-polar radar cross-section. Synthetic aperture radar approach is applied for formation of the tag's EM-image and revealing the tag's content. The achieved high data encoding capacity of 2 bits/cm2in this technique based on a fully printable tag is very convincing for many applications. The system immunity to multipath interference, bending effect, and printing inaccuracy suggests huge potentials for low-cost item tagging. Tags are also readable through a tick paper envelop; hence secure identification is provided by the proposed technique.

scholarly journals Rancang Bangun Sistem Pengaman Sepeda Motor Menggunakan Radio Frequency Identification (RFID) dan Notifikasi Melalui Handphone

2019 ◽  
Vol 8 (1) ◽  
pp. 13-19
Author(s):  
Meli Mildawati ◽  
Wildian Wildian
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Reed Switch ◽  
Rfid Tag ◽  
Rfid Reader ◽  
Frequency Identification ◽  
Arduino Uno

Sistem pengaman sepeda motor menggunakan radio frequency identification (RFID) dan notifikasi melalui handphone yang dikontrol dengan modul Arduino Uno telah dirancang bangun. RFID terdiri dari sebuah RFID tag dan RFID reader. RFID tag yang memiliki kode yang berbeda-beda, digunakan sebagai kunci untuk menghidupkan sepeda motor setelah kunci kontak digunakan. RFID reader dapat membaca tag pada jarak maksimal 1,26 cm. Sepeda motor yang dihidupkan tanpa menggunakan RFID tag atau RFID tag tidak sesuai menyebabkan aktifnya reed switch pada pelek roda depan. Ketika roda telah berputar sebanyak empat kali, maka alarm aktif dan GSM SIM 800L mengirimkan notifikasi berupa SMS sebanyak satu kali dan misscall sebanyak tiga kali ke nomor handphone pemilik sepeda motor. Waktu delay rata-rata SMS dan miscall berturut-turut adalah 5,42 s, 8,62 s, 61,14 s dan 113,16 s. Kata kunci: sistem pengaman sepeda motor, RFID, Arduino Uno , reed switch, GSM SIM 800L

Basic Characteristics of RFID Antenna for Urination Detection

2012 ◽  
Vol 85 ◽  
pp. 59-64
Author(s):  
Hiromasa Nakajima ◽  
Masaharu Takahashi ◽  
Kazuyuki Saito ◽  
Koichi Ito
Keyword(s):  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Mental Strain ◽  
Rfid Tag ◽  
Sensing System ◽  
Rfid System ◽  
Frequency Identification ◽  
Basic Characteristics ◽  
Antenna Characteristics

Radio frequency identification (RFID) system has been expected to be expanded in new fields. This paper shows a sensing system for urination by embedding an RFID tag into a paper diaper. The urination could be checked by change of the antenna characteristics. It could be possible to reduce physical and mental strain of both patients and their care personnel. In order to detect the urination, the RFID antenna was designed and the characteristics of the antenna were calculated. In addition, the antenna characteristics were measured with a phantom. As the result, urination considerably changes the antenna characteristics and that the system can be used to detect the urination.

Development of compact inductive coupled meander line RFID tag for near-field applications

2016 ◽  
Vol 9 (4) ◽  
pp. 757-764 ◽  
Author(s):  
Abhishek Choudhary ◽  
Krishan Gopal ◽  
Deepak Sood ◽  
Chandra Charu Tripathi
Keyword(s):  
Radio Frequency ◽  
Radiation Pattern ◽  
Radio Frequency Identification ◽  
High Frequency ◽  
Near Field ◽  
High Frequency Band ◽  
Rfid Tag ◽  
Frequency Identification ◽  
Meander Line ◽  
System Operating

The development of compact radio frequency identification (RFID) tag is the key requirement for wireless tracking of precious small size goods/packages in transport. A design of compact meander line tag antenna having inductive coupling feed is presented for RFID system operating at ultra high frequency band of865–867 MHz. The size of the proposed tag antenna is43 mm × 10 mm, and is designed using Higgs 4 IC chip (made Alien Technology, USA) having impedance of20.55− j191.45 Ωat centre frequency866 MHz.The antenna characteristics such as impedance, radiation pattern, bandwidth, and effect of ground on gain and tag size are analyzed and found to closely match with the simulated values. The observed value of reading range varies from87.5 to 35 cmsdepending on mounting on non-metal and metal packages, respectively.

Investigation on the chipless RFID tag with a UWB pulse using a UWB IR-based reader

2021 ◽  
pp. 1-10
Author(s):  
Kawther Mekki ◽  
Omrane Necibi ◽  
Hugo Dinis ◽  
Paulo Mendes ◽  
Ali Gharsallah
Keyword(s):  
Radio Frequency Identification ◽  
Ultra Wideband ◽  
Rfid Tag ◽  
Triangular Patch ◽  
Chipless Rfid ◽  
Frequency Domains ◽  
Measurement Results ◽  
Reader Antenna ◽  
Frequency Identification ◽  
Working Principle

Abstract In order to encrypt/encode data based on the magnitude level of the radar cross-section (RCS), we propose an approach with a precise estimation considering the resonant characteristics of a multipatch backscatter-based chipless radio frequency identification (RFID) dedicated for chipless tags depolarization. The working principle is based on the polarization mismatch between the tag and the reader antenna to control the magnitude of the backscatter, which allows a reliable detection in real environments. We introduce in this paper a new 4-bit chipless RFID tag with an enhanced RCS, based on a triangular patch antenna with multiple resonators. Additionally, we propose an ultra-wideband impulse radar (UWB-IR)-based reader that interrogates the chipless tag with a UWB pulse, and the received backscatter was studied in both time- and frequency-domains. The antenna was operating from 4.7 to 6.1 GHz, a band allocated for RFID systems. The obtained experimental measurement results in the environment of anechoic chamber were exceptionally relevant to validate the simulation results.

Research on U-shaped tuning stub RFID tag on different objects

2014 ◽  
Vol 7 (6) ◽  
pp. 629-636 ◽  
Author(s):  
Chien-Hung Chen ◽  
Yi-Fang Lin ◽  
Hua-Ming Chen
Keyword(s):  
Radio Frequency Identification ◽  
Measurement Data ◽  
Antenna Measurement ◽  
Antenna Structure ◽  
Rfid Tag ◽  
Radiated Power ◽  
Frequency Identification ◽  
Read Range ◽  
Good Agreement ◽  
Inductive Reactance

A new ultra-high frequency radio frequency identification (RFID) tag antenna, which is comprised a U-shaped tuning stub and a dipole radiator for different permittivity surfaces is investigated, fabricated, and measured. For a conjugate match to the NXP G2XM chip impedance of 29–j137 at 915 MHz, a dipole tag antenna with U-shaped stubconnected to dipole arms was designed. Simple size adjustments of the U-shaped tuning stub and dipole radiator of the antenna allow for easy control of the antenna resistance and inductive reactance, from which the chip impedance requirement may be readily satisfied. The read range of the prototype antenna attached on a different permittivity surfaces (εr= 1–4) can reach more than 4.5 m, which has been tested for an RFID reader with 4.0 W of effective isotropic radiated power. The antenna structure consists of two dipole load bars and two loop electrically connected. The design offers more choice of freedom to tune the input impedance of the proposed antenna. Measurement data are presented which are in good agreement with simulation results. The design is suitable for mounting on all kinds of objects. The fabricated tag sensitivity of −3 dBm, read range of 7 m on the x–z and y–z planes, and the measured orientation radiation patterns were obtained in the desired frequency band.

IMPLEMENTATION OF RADIO FREQUENCY IDENTIFICATION DEVICES IN 0.3 TESLA MAGNETIC RESONANCE IMAGING AND COMPUTED TOMOGRAPHY

2014 ◽  
Vol 26 (06) ◽  
pp. 1450069 ◽  
Author(s):  
M. Periyasamy ◽  
R. Dhanasekaran
Keyword(s):  
Magnetic Resonance Imaging ◽  
Computed Tomography ◽  
Magnetic Resonance ◽  
Radio Frequency ◽  
Radio Frequency Identification ◽  
Ct Scanning ◽  
Reading Performance ◽  
Resonance Imaging ◽  
Rfid Tag ◽  
Frequency Identification

The aim of this work was to assess two issues concerning magnetic resonance imaging (MRI) including device functionality and image artifacts for the presence of ultra high frequency (UHF) radio frequency identification (RFID) devices in connection with 0.3 Tesla at 12.7 MHz MRI and computed tomography (CT) scanning. A total of 15 samples of RFID tags with two dissimilar sizes (wristband and ID card types) were tested. The tags were exposed to a several numbers of MR-imaging conditions during MRI examination and X-rays of CT scan. During the test, the tags were oriented in three different directions (axial, coronal and sagittal) pertaining to MRI system in order to encompass all possible situations with respect to the patient undergoing MRI and CT scanning, wearing a RFID tag on wrist. In addition to the device functionality test and imaging artifacts, we also analyzed the reading performance of the RFID reader considering significant factors in MRI scan area. We observed that the tags did not experience physical damage with its functionality remained unchanged even after MRI and CT scanning, and there was no modification in previously stored data as well. In addition, no evidence of artifact was observed in the acquired MR and CT images. Therefore, we can conclude that the use of passive UHF RFID tag is safe for a patient undergoing MRI at 0.3 T/12.7 MHz and CT scanning. However, the reading performance of the RFID reader got affected depending on whether the MRI machine was on or off and also by the angle of the reader antenna.

Sign in / Sign up

Export Citation Format

Share Document