scholarly journals Investigations of Printed Flexible pH Sensing Materials Based on Graphene Platelets and Submicron RuO2Powders

2017 ◽  
Vol 2017 ◽  
pp. 1-6 ◽  
Author(s):  
Daniel Janczak ◽  
Andrzej Peplowski ◽  
Grzegorz Wroblewski ◽  
Lukasz Gorski ◽  
Elzbieta Zwierkowska ◽  
...  
Keyword(s):  
Ruthenium Oxide ◽  
Ph Sensitive ◽  
Ruthenium Dioxide ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Sensitive Layer ◽  
Uv Curable ◽  
Before And After ◽  
Oxide Composites ◽  
Fabrication Costs

The paper describes the investigations of pH-sensitive materials for screen printed flexible pH sensors. The sensors were fully printed and consisted of three layers, conductive made of low temperature-curable silver paste, insulating made of UV-curable dielectric paste, and pH-sensitive made of developed graphene/ruthenium oxide pastes. Graphene and ruthenium oxide composites were prepared with different proportions of graphene nanoplatelets paste and submicron ruthenium dioxide. To perform functional measurements, particular testing sensors were fabricated on flexible polyester foil. Afterwards electrochemical potential measurements of fabricated devices were carried out. Sensors were also exposed to cyclic bending and the change of pH sensitivity before and after bending was described. Eventually, percolation threshold concerning the amount of ruthenium oxide in the pH-sensitive layer was designated and UV influence on the sensitivity was observed that together allow for optimization of sensors’ fabrication costs.

scholarly journals Ruthenium Oxide pH Sensing for Organs-On-Chip Studies

Proceedings ◽  
2018 ◽  
Vol 2 (13) ◽  
pp. 709 ◽  
Author(s):  
Esther Tanumihardja ◽  
Wouter Olthuis ◽  
Albert van den Berg
Keyword(s):  
Ph Sensor ◽  
Ruthenium Oxide ◽  
Open Circuit ◽  
Biological Medium ◽  
Similar Response ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Cross Sensitivity ◽  
On Chip

A ruthenium oxide (RuOx) electrode is being developed as potentiometric pH sensor for organs-on-chip applications. Open-circuit potential (OCP) of the RuOx electrode showed a response of −58.05 mV/pH, with no cross-sensitivity to potentially interfering/complexing ions (tested were lithium, sulfate, chloride, and calcium ions). Similar response was observed in complex biological medium. The electrode stored in liquid had a long-term drift of −0.8 mV/hour (corresponding to ΔpH of 0.013/hour) and response time in complex biological medium was 3.7 s. Minimum cross-sensitivity to oxygen was observed as the OCP shifted ~3 mV going from deoxygenated to oxygenated solution. This response is one magnitude lower than previously reported for metal- oxide pH sensors. Overall, the RuOx pH sensor has proven to be a suitable pH sensor for organs- on-chip applications.

scholarly journals Ruthenium Oxide Nanorods as Potentiometric pH Sensor for Organs-On-Chip Purposes

Sensors ◽  
2018 ◽  
Vol 18 (9) ◽  
pp. 2901 ◽  
Author(s):  
Esther Tanumihardja ◽  
Wouter Olthuis ◽  
Albert van den Berg
Keyword(s):  
Ph Sensor ◽  
Ruthenium Oxide ◽  
Open Circuit ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Oxide Nanorods ◽  
Order Of Magnitude ◽  
On Chip ◽  
Interfering Ions

A ruthenium oxide (RuOx) sensor for potentiometric pH sensing is currently being developed for organs-on-chip purposes. The sensor was fabricated from a Ru(OH)3 precursor, resulting in RuOx nanorods after heating. An open-circuit potential of the RuOx electrode showed a near-Nernstian response of −58.05 mV/pH, with good selectivity against potentially interfering ions (lithium, sulfate, chloride, and calcium ions). The preconditioned electrode (stored in liquid) had a long-term drift of −0.8 mV/h, and its response rate was less than 2 s. Sensitivity to oxygen was observed at an order of magnitude lower than other reported metal-oxide pH sensors. Together with miniaturizability, the RuOx pH sensor proves to be a suitable pH sensor for organs-on-chip studies.

scholarly journals Synthesis and Characterization of N-Isopropylacrylamide Microspheres as pH Sensors

Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6493
Author(s):  
Barry K. Lavine ◽  
Necati Kaval ◽  
Leah Oxenford ◽  
Mariya Kim ◽  
Kaushalya Sharma Dahal ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Ph Sensitive ◽  
Polymer Microspheres ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Polymer Particles ◽  
Buffer Solution ◽  
Sensitive Material ◽  
Polymer Swelling ◽  
Pva Solutions

Swellable polymer microspheres that respond to pH were prepared by free radical dispersion polymerization using N-isopropylacrylamide (NIPA), N,N′-methylenebisacrylamide (MBA), 2,2-dimethoxy-2-phenylacetylphenone, N-tert-butylacrylamide (NTBA), and a pH-sensitive functional comonomer (acrylic acid, methacrylic acid, ethacrylic acid, or propacrylic acid). The diameter of the microspheres was between 0.5 and 1.0 μm. These microspheres were cast into hydrogel membranes prepared by mixing the pH-sensitive swellable polymer particles with aqueous polyvinyl alcohol (PVA) solutions followed by crosslinking with glutaric dialdehyde for use as pH sensors. Large changes in the turbidity of the PVA membrane were observed as the pH of the buffer solution in contact with the membrane was varied. These changes were monitored by UV–visible absorbance spectroscopy. Polymer swelling of many NIPA copolymers was reversible and independent of the ionic strength of the buffer solution in contact with the membrane. Both the degree of swelling and the apparent pKa of the polymer microspheres increased with temperature. Furthermore, the apparent pKa of the polymer particles could be tuned to respond sharply to pH in a broad range (pH 4.0–7.0) by varying the amount of crosslinker (MBA) and transition temperature modifier (NTBA), and the amount, pKa, and hydrophobicity of the pH-sensitive functional comonomer (alkyl acrylic acid) used in the formulation. Potential applications of these polymer particles include fiber optic pH sensing where the pH-sensitive material can be immobilized on the distol end of an optical fiber.

scholarly journals Titanium Nitride Thin Film Based Low-Redox-Interference Potentiometric pH Sensing Electrodes

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 42
Author(s):  
Shimrith Paul Shylendra ◽  
Wade Lonsdale ◽  
Magdalena Wajrak ◽  
Mohammad Nur-E-Alam ◽  
Kamal Alameh
Keyword(s):  
Thin Film ◽  
Titanium Nitride ◽  
Orange Juice ◽  
Ph Sensor ◽  
Reference Electrode ◽  
Cost Effective ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Potential Shift ◽  
Double Junction

In this work, a solid-state potentiometric pH sensor is designed by incorporating a thin film of Radio Frequency Magnetron Sputtered (RFMS) Titanium Nitride (TiN) working electrode and a commercial Ag|AgCl|KCl double junction reference electrode. The sensor shows a linear pH slope of −59.1 mV/pH, R2 = 0.9997, a hysteresis as low as 1.2 mV, and drift below 3.9 mV/h. In addition, the redox interference performance of TiN electrodes is compared with that of Iridium Oxide (IrO2) counterparts. Experimental results show −32 mV potential shift (E0 value) in 1 mM ascorbic acid (reducing agent) for TiN electrodes, and this is significantly lower than the −114 mV potential shift of IrO2 electrodes with sub-Nernstian sensitivity. These results are most encouraging and pave the way towards the development of miniaturized, cost-effective, and robust pH sensors for difficult matrices, such as wine and fresh orange juice.

scholarly journals Visual pH Sensors: From a Chemical Perspective to New Bioengineered Materials

Molecules ◽  
2021 ◽  
Vol 26 (10) ◽  
pp. 2952
Author(s):  
Luigi Di Costanzo ◽  
Barbara Panunzi
Keyword(s):  
Ph Monitoring ◽  
Three Dimensional ◽  
Lessons Learned ◽  
Background Information ◽  
Biological Macromolecules ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Cellular Functions ◽  
Metal Organic

Many human activities and cellular functions depend upon precise pH values, and pH monitoring is considered a fundamental task. Colorimetric and fluorescence sensors for pH measurements are chemical and biochemical tools able to sense protons and produce a visible signal. These pH sensors are gaining widespread attention as non-destructive tools, visible to the human eye, that are capable of a real-time and in-situ response. Optical “visual” sensors are expanding researchers’ interests in many chemical contexts and are routinely used for biological, environmental, and medical applications. In this review we provide an overview of trending colorimetric, fluorescent, or dual-mode responsive visual pH sensors. These sensors include molecular synthetic organic sensors, metal organic frameworks (MOF), engineered sensing nanomaterials, and bioengineered sensors. We review different typological chemical entities of visual pH sensors, three-dimensional structures, and signaling mechanisms for pH sensing and applications; developed in the past five years. The progression of this review from simple organic molecules to biological macromolecules seeks to benefit beginners and scientists embarking on a project of pH sensing development, who needs background information and a quick update on advances in the field. Lessons learned from these tools will aid pH determination projects and provide new ways of thinking for cell bioimaging or other cutting-edge in vivo applications.

scholarly journals Tryptophan 207 is crucial to the unique properties of the human voltage-gated proton channel, hHV1

2015 ◽  
Vol 146 (5) ◽  
pp. 343-356 ◽  
Author(s):  
Vladimir V. Cherny ◽  
Deri Morgan ◽  
Boris Musset ◽  
Gustavo Chaves ◽  
Susan M.E. Smith ◽  
...  
Keyword(s):  
Transmembrane Helix ◽  
Ph Sensor ◽  
Proton Channel ◽  
Tryptophan Residue ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Voltage Gated ◽  
Karlodinium Veneficum ◽  
Channel Opening ◽  
External Ph

Part of the “signature sequence” that defines the voltage-gated proton channel (HV1) is a tryptophan residue adjacent to the second Arg in the S4 transmembrane helix: RxWRxxR, which is perfectly conserved in all high confidence HV1 genes. Replacing Trp207 in human HV1 (hHV1) with Ala, Ser, or Phe facilitated gating, accelerating channel opening by 100-fold, and closing by 30-fold. Mutant channels opened at more negative voltages than wild-type (WT) channels, indicating that in WT channels, Trp favors a closed state. The Arrhenius activation energy, Ea, for channel opening decreased to 22 kcal/mol from 30–38 kcal/mol for WT, confirming that Trp207 establishes the major energy barrier between closed and open hHV1. Cation–π interaction between Trp207 and Arg211 evidently latches the channel closed. Trp207 mutants lost proton selectivity at pHo >8.0. Finally, gating that depends on the transmembrane pH gradient (ΔpH-dependent gating), a universal feature of HV1 that is essential to its biological functions, was compromised. In the WT hHV1, ΔpH-dependent gating is shown to saturate above pHi or pHo 8, consistent with a single pH sensor with alternating access to internal and external solutions. However, saturation occurred independently of ΔpH, indicating the existence of distinct internal and external pH sensors. In Trp207 mutants, ΔpH-dependent gating saturated at lower pHo but not at lower pHi. That Trp207 mutation selectively alters pHo sensing further supports the existence of distinct internal and external pH sensors. Analogous mutations in HV1 from the unicellular species Karlodinium veneficum and Emiliania huxleyi produced generally similar consequences. Saturation of ΔpH-dependent gating occurred at the same pHo and pHi in HV1 of all three species, suggesting that the same or similar group(s) is involved in pH sensing. Therefore, Trp enables four characteristic properties: slow channel opening, highly temperature-dependent gating kinetics, proton selectivity, and ΔpH-dependent gating.

scholarly journals Laser-Induced Biochar Formation through 355 nm Pulsed Laser Irradiation of Wood, and Application to Eco-Friendly pH Sensors

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1904
Author(s):  
Sung-Yeob Jeong ◽  
Chan-Woo Lee ◽  
Jun-Uk Lee ◽  
Yong-Won Ma ◽  
Bo-Sung Shin
Keyword(s):  
Laser Irradiation ◽  
Agricultural Land ◽  
Ph Sensor ◽  
Pulsed Laser ◽  
Agricultural Products ◽  
Organic Polymer ◽  
Ph Sensing ◽  
Ph Sensors ◽  
Linear Change ◽  
Pulsed Laser Irradiation

Due to the limited availability of agricultural land, pH sensing is becoming more and more important these days to produce efficient agricultural products. Therefore, to fabricate eco-friendly and disposable sensors, the black carbon, which is called biochar, is formed by irradiation of a UV pulsed laser having a wavelength of 355 nm onto wood and applying the resulting material as a pH sensor. The surfaces of three types of wood (beech, cork oak, and ash) were converted to the graphitic structure after UV laser irradiation; their morphologies were investigated. In addition, since the content of lignin, an organic polymer, is different for each wood, optimal laser irradiation conditions (laser fluence) needed to form these woods into pH sensors were considered. Depending on the degree of oil-like material generated after laser irradiation, a disposable pH sensor that can be used from one to three times is fabricated; due to the environmental characteristics of wood and biochar, the sensor shows high availability in that it can be easily discarded after use on agricultural land. After that, it can be used as filter in soil. Our wood-based pH sensor sensitively measures sequential changes from pH 4 to pH 10 and shows a very linear change of △R/R, indicating its potential for use in agriculture.

scholarly journals TiO2 Nano Flowers Based EGFET Sensor for pH Sensing

Coatings ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 251
Author(s):  
Chih-Chiang Yang ◽  
Kuan-Yu Chen ◽  
Yan-Kuin Su
Keyword(s):  
Ph Value ◽  
Ph Sensor ◽  
High Sensitivity ◽  
Experimental Result ◽  
Ph Sensing ◽  
Voltage Reference ◽  
Ph Sensors ◽  
Oxide Substrate ◽  
Ph Range ◽  
The Relationship

In this study, pH sensors were successfully fabricated on a fluorine-doped tin oxide substrate and grown via hydrothermal methods for 8 h for pH sensing characteristics. The morphology was obtained by high-resolution scanning electron microscopy and showed randomly oriented flower-like nanostructures. The TiO2 nanoflower pH sensors were measured over a pH range of 2–12. Results showed a high sensitivity of the TiO2 nano-flowers pH sensor, 2.7 (μA)1/2/pH, and a linear relationship between IDS and pH (regression of 0.9991). The relationship between voltage reference and pH displayed a sensitivity of a 46 mV/pH and a linear regression of 0.9989. The experimental result indicated that a flower-like TiO2 nanostructure extended gate field effect transistor (EGFET) pH sensor effectively detected the pH value.

Sign in / Sign up

Export Citation Format

Share Document