scholarly journals Activity and Stability of Trypsin Immobilized onto Chitosan Magnetic Nanoparticles

2017 ◽  
Vol 2017 ◽  
pp. 1-10
Author(s):  
Jun Sun ◽  
Bin Xu ◽  
Yu Shi ◽  
Lin Yang ◽  
Hai-le Ma
Keyword(s):  
Magnetic Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
Covalent Immobilization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Immobilized Trypsin ◽  
Alkaline Conditions ◽  
Ph Range ◽  
Average Size

The aim of this study was to develop a thermally and operationally stable trypsin through covalent immobilization onto chitosan magnetic nanoparticles (Fe3O4 @CTS). The successful preparation of the Fe3O4 @CTS nanoparticles was verified by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and transmission electron microscopy (TEM), which indicated that the prepared Fe3O4 @CTS nanoparticles have superparamagnetic properties, with an average size of approximately 17 nm. Then, trypsin was covalently immobilized onto the Fe3O4 @CTS nanoparticles at a high loading capacity (149.25 mg/g). The FTIR data demonstrated that the trypsin had undergone a conformational change compared with free trypsin, and the Michaelis constant (Km) and the maximum hydrolysis reaction rate (Vmax) showed that the trypsin immobilized on the Fe3O4 @CTS had a lower affinity for BAEE and lower activity compared with free trypsin. However, the immobilized trypsin showed higher activity than free trypsin at pH 6.0 and in alkaline conditions and retained more than 84% of its initial activity at 60°C after 8 h incubation. Its excellent performance across a broader pH range and high thermal stability, as well as its effective hydrolysis of bovine serum albumin (BSA) and its reusability, make it more attractive than free trypsin for application in protein digestion.

Preparation and Characterization of CdSe Nanoparticles Synthesized Using the Ultrasonic Irradiation

2007 ◽  
Vol 124-126 ◽  
pp. 1229-1232 ◽  
Author(s):  
Myoung Seok Sung ◽  
Yoon Bok Lee ◽  
Yong Jin Kim ◽  
Yang Do Kim
Keyword(s):  
Ultrasonic Irradiation ◽  
Photoelectron Spectroscopy ◽  
Irradiation Time ◽  
Xrd Analysis ◽  
Cdse Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Surface Emission ◽  
Transmission Electron ◽  
Average Size

Cadmium selenide(CdSe) nanoparticles were prepared in the aqueous solution containing isopropyl alcohol by the ultrasonic irradiation at room temperature. The cadmium chloride (CdCl2) and sodium selenosulfate (Na2SeSO3) were used as the cadmium and selenium source, respectively. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), UV-Vis absorption spectra and PL spectra were used to characterize the CdSe nanoparticles. XRD analysis revealed the formation of cubic structure CdSe. TEM images showed aggregated CdSe nanoparticles with the size of nanometer scale. Average size of CdSe nanoparticles were about 3.9, 5.0 and 5.1nm with sonication time of 6, 30 and 40 minutes, respectively. The surface emission became less intensive and shifted to red with increasing irradiation time. This paper presents the effects of ultrasonic on the formation of CdSe nanoparticles and its characteristics.

Effect of protamine on Fe3O4@CS@GFTN composite magnetic nanoparticles

2019 ◽  
Vol 13 (02) ◽  
pp. 2050001 ◽  
Author(s):  
Huiping Shao ◽  
Luhui Wang ◽  
Tao Lin ◽  
Yumeng Zhang ◽  
Zhinan Zhang
Keyword(s):  
Magnetic Nanoparticles ◽  
Shell Structure ◽  
Lung Diseases ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Core Shell Structure ◽  
Average Size ◽  
Chemical Coprecipitation Method

Fe3O4@chitosan (CS)@Gefitinib (GFTN) core-shell structure composite magnetic nanoparticles (NPs) were prepared by chemical coprecipitation method in this study. In addition, protamine was doped in Fe3O4 cores to prepare Fe3O4@protamine@CS@GFTN core-shell structure composite NPs, in order to increase the loading of GFTN in composite NPs. They were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM) and spectrophotometer. The results show that the average size of Fe3O4@CS@GFTN and Fe3O4@protamine@CS@GFTN composite NPs is approximately 19 and 21[Formula: see text]nm, respectively. The saturation magnetizations of composite magnetic NPs and corresponding magnetic fluids are 57.20, 20.79, 59.58 and 19.75[Formula: see text]emu/g, respectively. The loading of GFTN in composite NPs was measured by a spectrophotometer to be about 13.5% and 27.6%, respectively. The addition of protamine increased the loading of GFTN two times, indicating that it will play an important role in the management of lung diseases.

scholarly journals Facile Production of a Fenton-Like Photocatalyst by Two-Step Calcination with a Broad pH Adaptability

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 676
Author(s):  
Siyang Ji ◽  
Yanling Yang ◽  
Xing Li ◽  
Hang Liu ◽  
Zhiwei Zhou
Keyword(s):  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Active Oxygen Species ◽  
Oxygen Species ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Wide Ph Range ◽  
Calcination Method ◽  
Ph Range

A novel heterogeneous Fenton-like photocatalyst, Fe-doped graphitic carbon nitride (Fe-g-C3N4), was produced by facile two-step calcination method. This Fe–g–C3N4 catalyzed rhodamine B degradation in the presence of H2O2 accompanied with visible light irradiation. transmission electron microscopy(TEM), x-ray diffraction (XRD), FT-IR, x-ray photoelectron spectroscopy (XPS), and photoluminescence fluorescent spectrometer (PL) characterization analysis methods were adopted to evaluate the physicochemical property of samples. It can be observed that the Fe-g-C3N4 exhibited excellent photocatalytic Fenton-like activity at a wide pH range of 3–9, with rhodamine B(RhB) degradation efficiency up to 95.5% after irradiation for 45 min in the presence of 1.0 mM H2O2. Its high activity was ascribed to the formation of Fe–N ligands in the triazine rings that accelerated electron movement driving the Fe(III)/Fe(II) redox cycle, and inhibited photo-generated electron hole re-combinations for continuous generation of reactive oxygen species by reactions between Fe(II) and H2O2. The main active oxygen species were hydroxyl radicals, followed by superoxide radicals and hole electrons. This produced catalyst of Fe–g–C3N4 shows excellent reusability and stability, and can be a promising candidate for decontamination of wastewater.

scholarly journals Synthesis of gold nanoparticles using Platycodon grandiflorum extract and its antipathogenic activity under optimal conditions

2020 ◽  
Vol 10 ◽  
pp. 184798042096169
Author(s):  
Periasamy Anbu ◽  
Subash CB Gopinath ◽  
S Jayanthi
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Plant Extracts ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Platycodon Grandiflorum ◽  
Transmission Electron ◽  
Flower Plant ◽  
Average Size

Gold nanoparticles have many applications in the biomedical field, mainly for drug delivery, cancer therapy, and detection of pathogenic microorganisms. In this study, gold nanoparticles synthesized using Platycodon grandiflorum (Balloon flower plant) extracts were evaluated for their antibacterial potential. Gold nanoparticles were synthesized at 20–50°C using different volumes of the leaf extract. Biosynthesis of gold nanoparticles was confirmed by ultraviolet–visible spectral absorption at 545 nm by surface plasmon resonance. The morphology and size of the P. grandiflorum gold nanoparticles were further characterized as spherical in shape with an average size of 15 nm in diameter by scanning electron microscopy and transmission electron microscopy. Energy-dispersive X-ray analysis clearly displayed the presence of gold particles. The structural analysis results with face central cubic crystalline nature and elemental composition, including gold, were confirmed by X-ray diffraction and X-ray photoelectron spectroscopy, respectively. In addition, Fourier transform infrared results identified the functional group in P. grandiflorum that is involved in the reduction of metal ions to gold nanoparticles. The synthesized P. grandiflorum gold nanoparticles exhibited efficient antibacterial activity against Escherichia coli (16 mm) and Bacillus subtilis (11 mm). This report confirms the synthesis of gold nanoparticle from balloon flower plant extracts, which can be used as a reducing and stabilizing agent and demonstrates its antibacterial applications.

scholarly journals A study of electrocatalytic ethanol oxidation of nanoporous PtSi alloy

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Nali Lu ◽  
Yao Li ◽  
Lei Zhang ◽  
Yong Fang ◽  
Bin Qian ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Three Dimensional ◽  
Oxidation Reactions ◽  
X Ray Diffraction ◽  
Direct Ethanol Fuel Cells ◽  
X Ray ◽  
Transmission Electron ◽  
Bicontinuous Structure ◽  
Average Size ◽  
Catalyzed Oxidation

In recent years, nanoporous alloys have presented the advantages of a large specific surface area, low density, and simple operation, and they have been widely used in the fields of catalysis, magnetism, and medicine. Nanoporous Pt-Si alloy was prepared by melt-spun and chemical dealloying, and was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscope, and transmission electron microscopy. Pt-Si alloys possess a three-dimensional bicontinuous structure and an average size of 5 nanometers. Compared with commercial Pt/C catalysts, nanoporous Pt-Si alloys exhibit excellent electrocatalytic activity and stability in ethanol-catalyzed oxidation reactions. It is taken into consideration to be a promising catalyst in direct ethanol fuel cells.

scholarly journals α-Cellulose Fibers of Paper-Waste Origin Surface-Modified with Fe3O4 and Thiolated-Chitosan for Efficacious Immobilization of Laccase

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 581
Author(s):  
Gajanan S. Ghodake ◽  
Surendra K. Shinde ◽  
Ganesh D. Saratale ◽  
Rijuta G. Saratale ◽  
Min Kim ◽  
...  
Keyword(s):  
Enzyme Immobilization ◽  
Photoelectron Spectroscopy ◽  
Cellulose Fibers ◽  
Relative Activity ◽  
Significant Activity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Laccase Immobilization ◽  
Surface Modified

The utilization of waste-paper-biomass for extraction of important α-cellulose biopolymer, and modification of extracted α-cellulose for application in enzyme immobilization can be extremely vital for green circular bio-economy. Thus, in this study, α-cellulose fibers were super-magnetized (Fe3O4), grafted with chitosan (CTNs), and thiol (-SH) modified for laccase immobilization. The developed material was characterized by high-resolution transmission electron microscopy (HR-TEM), HR-TEM energy dispersive X-ray spectroscopy (HR-TEM-EDS), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) analyses. Laccase immobilized on α-Cellulose-Fe3O4-CTNs (α-Cellulose-Fe3O4-CTNs-Laccase) gave significant activity recovery (99.16%) and laccase loading potential (169.36 mg/g). The α-Cellulose-Fe3O4-CTNs-Laccase displayed excellent stabilities for temperature, pH, and storage time. The α-Cellulose-Fe3O4-CTNs-Laccase applied in repeated cycles shown remarkable consistency of activity retention for 10 cycles. After the 10th cycle, α-Cellulose-Fe3O4-CTNs possessed 80.65% relative activity. Furthermore, α-Cellulose-Fe3O4-CTNs-Laccase shown excellent degradation of pharmaceutical contaminant sulfamethoxazole (SMX). The SMX degradation by α-Cellulose-Fe3O4-CTNs-Laccase was found optimum at incubation time (20 h), pH (3), temperatures (30 °C), and shaking conditions (200 rpm). Finally, α-Cellulose-Fe3O4-CTNs-Laccase gave repeated degradation of SMX. Thus, this study presents a novel, waste-derived, highly capable, and super-magnetic nanocomposite for enzyme immobilization applications.

scholarly journals Surface Stoichiometry and Depth Profile of Tix-CuyNz Thin Films Deposited by Magnetron Sputtering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3191
Author(s):  
Arun Kumar Mukhopadhyay ◽  
Avishek Roy ◽  
Gourab Bhattacharjee ◽  
Sadhan Chandra Das ◽  
Abhijit Majumdar ◽  
...  
Keyword(s):  
Magnetron Sputtering ◽  
Photoelectron Spectroscopy ◽  
Film Surface ◽  
Grazing Incidence ◽  
X Ray Diffraction ◽  
X Ray ◽  
Relative Composition ◽  
Transmission Electron ◽  
Deposited Film ◽  
Deposited Films

We report the surface stoichiometry of Tix-CuyNz thin film as a function of film depth. Films are deposited by high power impulse (HiPIMS) and DC magnetron sputtering (DCMS). The composition of Ti, Cu, and N in the deposited film is investigated by X-ray photoelectron spectroscopy (XPS). At a larger depth, the relative composition of Cu and Ti in the film is increased compared to the surface. The amount of adventitious carbon which is present on the film surface strongly decreases with film depth. Deposited films also contain a significant amount of oxygen whose origin is not fully clear. Grazing incidence X-ray diffraction (GIXD) shows a Cu3N phase on the surface, while transmission electron microscopy (TEM) indicates a polycrystalline structure and the presence of a Ti3CuN phase.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

scholarly journals Aluminum Nitride-Silicon Carbide Alloy Crystals Grown on SiC Substrates by Sublimation

2005 ◽  
Vol 10 ◽  
Author(s):  
Z. Gu ◽  
L. Du ◽  
J.H. Edgar ◽  
E.A. Payzant ◽  
L. Walker ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
X Ray Diffraction ◽  
Original Source ◽  
X Ray ◽  
Alloy Crystal ◽  
Transmission Electron ◽  
Crystal Substrate ◽  
Vapor Distribution ◽  
Uniform Composition

AlN-SiC alloy crystals, with a thickness greater than 500 µm, were grown on 4H- and 6H-SiC substrates from a mixture of AlN and SiC powders by the sublimation-recondensation method at 1860-1990 °C. On-axis SiC substrates produced a rough surface covered with hexagonal grains, while 6H- and 4H- off-axis SiC substrates with different miscut angles (8° or 3.68°) formed a relatively smooth surface with terraces and steps. The substrate misorientation ensured that the AlN-SiC alloy crystals grew two dimensionally as identified by scanning electron microscopy (SEM). X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed that the AlN-SiC alloys had the wurtzite structure. Electron probe microanalysis (EPMA) and x-ray photoelectron spectroscopy (XPS) demonstrated that the resultant alloy crystals had non-stoichiometric ratios of Al:N and Si:C and a uniform composition throughout the alloy crystal from the interface to the surface. The composition ratio of Al:Si of the alloy crystals changed with the growth temperature, and differed from the original source composition, which was consistent with the results predicted by thermodynamic calculation of the solid-vapor distribution of each element. XPS detected the bonding between Si-C, Si-N, Si-O for the Si 2p spectra. The dislocation density decreased with the growth, which was lower than 106 cm−2 at the alloy surface, more than two orders of magnitude lower compared to regions close to the crystal/substrate interface, as determined by TEM.

scholarly journals Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Yan Ye ◽  
Da Yin ◽  
Bin Wang ◽  
Qingwen Zhang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
3D Structure ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Aerogels ◽  
Transmission Electron ◽  
Potential Applications ◽  
Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Sign in / Sign up

Export Citation Format

Share Document