scholarly journals Parametric Study of Strain Rate Effects on Nanoparticle-Reinforced Polymer Composites

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
B. Soltannia ◽  
I. Haji Gholami ◽  
S. Masajedian ◽  
P. Mertiny ◽  
D. Sameoto ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Epoxy Resin ◽  
Polymer Composites ◽  
Parametric Study ◽  
Mechanical Response ◽  
Absorption Capacity ◽  
Weight Percentage ◽  
Reinforced Polymer ◽  
Recent Emergence

Crashworthiness, energy absorption capacity, and safety are important factors in the design of lightweight vehicles made of fiber-reinforced polymer composite (FRP) components. The relatively recent emergence of the nanotechnology industry has presented a novel means to augment the mechanical properties of various materials. As a result, recent attempts have contemplated the use of nanoparticles to further improve the resiliency of resins, especially when resins are used for mating FRP components. Therefore, a comprehensive understanding of the response of nanoreinforced polymer composites, subjected to various rates of loading, is of paramount importance for developing reliable structures. In this paper, the effects of nanoreinforcement on the mechanical response of a commonly used epoxy resin subjected to four different strain rates, are systematically investigated. The results are then compared to those of the neat resin. To characterize the mechanical properties of the nanocomposite, a combination of the strain rate-dependent mechanical (SRDM) model of Goldberg and his coworkers and Halpin-Tsai’s micromechanical approach is employed. Subsequently, a parametric study is conducted to ascertain the influences of particle type and their weight percentage. Finally, the numerical results are compared to the experimental data obtained from testing of the neat and the nanoreinforced epoxy resin.

scholarly journals A Review on Mechanical Properties of Natural Fibre Reinforced Polymer Composites under Various Strain Rates

2021 ◽  
Vol 5 (5) ◽  
pp. 130
Author(s):  
Tan Ke Khieng ◽  
Sujan Debnath ◽  
Ernest Ting Chaw Liang ◽  
Mahmood Anwar ◽  
Alokesh Pramanik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Polymer Composites ◽  
Stress Transfer ◽  
Natural Fibre ◽  
Transfer Efficiency ◽  
Strain Rates ◽  
Reinforced Polymer ◽  
Fibre Reinforced Polymer ◽  
Fibre Matrix

With the lightning speed of technological evolution, the demand for high performance yet sustainable natural fibres reinforced polymer composites (NFPCs) are rising. Especially a mechanically competent NFPCs under various loading conditions are growing day by day. However, the polymers mechanical properties are strain-rate dependent due to their viscoelastic nature. Especially for natural fibre reinforced polymer composites (NFPCs) which the involvement of filler has caused rather complex failure mechanisms under different strain rates. Moreover, some uneven micro-sized natural fibres such as bagasse, coir and wood were found often resulting in micro-cracks and voids formation in composites. This paper provides an overview of recent research on the mechanical properties of NFPCs under various loading conditions-different form (tensile, compression, bending) and different strain rates. The literature on characterisation techniques toward different strain rates, composite failure behaviours and current challenges are summarised which have led to the notion of future study trend. The strength of NFPCs is generally found grow proportionally with the strain rate up to a certain degree depending on the fibre-matrix stress-transfer efficiency. The failure modes such as embrittlement and fibre-matrix debonding were often encountered at higher strain rates. The natural filler properties, amount, sizes and polymer matrix types are found to be few key factors affecting the performances of composites under various strain rates whereby optimally adjust these factors could maximise the fibre-matrix stress-transfer efficiency and led to performance increases under various loading strain rates.

scholarly journals Static Mechanical Properties of Expanded Polypropylene Crushable Foam

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 249
Author(s):  
Przemysław Rumianek ◽  
Tomasz Dobosz ◽  
Radosław Nowak ◽  
Piotr Dziewit ◽  
Andrzej Aromiński
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Strain Rate ◽  
Energy Absorption ◽  
Experimental Tests ◽  
Absorption Capacity ◽  
Strain Rates ◽  
Foam Density ◽  
Energy Absorption Capacity ◽  
Closed Cell

Closed-cell expanded polypropylene (EPP) foam is commonly used in car bumpers for the purpose of absorbing energy impacts. Characterization of the foam’s mechanical properties at varying strain rates is essential for selecting the proper material used as a protective structure in dynamic loading application. The aim of the study was to investigate the influence of loading strain rate, material density, and microstructure on compressive strength and energy absorption capacity for closed-cell polymeric foams. We performed quasi-static compressive strength tests with strain rates in the range of 0.2 to 25 mm/s, using a hydraulically controlled material testing system (MTS) for different foam densities in the range 20 g/dm3 to 220 g/dm3. The above tests were carried out as numerical simulation using ABAQUS software. The verification of the properties was carried out on the basis of experimental tests and simulations performed using the finite element method. The method of modelling the structure of the tested sample has an impact on the stress values. Experimental tests were performed for various loads and at various initial temperatures of the tested sample. We found that increasing both the strain rate of loading and foam density raised the compressive strength and energy absorption capacity. Increasing the ambient and tested sample temperature caused a decrease in compressive strength and energy absorption capacity. For the same foam density, differences in foam microstructures were causing differences in strength and energy absorption capacity when testing at the same loading strain rate. To sum up, tuning the microstructure of foams could be used to acquire desired global materials properties. Precise material description extends the possibility of using EPP foams in various applications.

Assessing of Mechanical Properties of Natural Fiber Reinforced Polymer Matrix Hybrid Composites

2015 ◽  
Vol 766-767 ◽  
pp. 199-204 ◽  
Author(s):  
Kumar Jayachandran Nirmal ◽  
D. Premkumar
Keyword(s):  
Mechanical Properties ◽  
Epoxy Resin ◽  
Natural Fiber ◽  
Volume Fraction ◽  
Hybrid Composites ◽  
Natural Fibres ◽  
Fiber Reinforced Polymer ◽  
Resin Matrix ◽  
Reinforced Polymer ◽  
Individual Type

An experimental analysis has been carried out to investigate the mechanical properties of composites reinforced by sisal, coir, and banana fibres into epoxy resin matrix. The natural fibres were extracted by retting and manual processes. The composites fabricated by epoxy resin and reinforcement in the hybrid combination of Sisal-Banana and Sisal-Coir with the volume fraction of fibres varying from 5% to 30%. It has been identified that the mechanical properties increase with the increase of volume fraction of fibres to a certain extent and then decreases. The hybridization of the reinforcement in the composite shows greater mechanical properties when compared to individual type of natural fibres reinforced. For all the composites tested, the tensile strength of the composite increased up to 25% of volume fraction of the fibres and further for the increase in the volume fraction of fibre the mechanical properties were decreased. As same as tensile properties, the flexural and impact strength also increased linearly up to 25% of volume fraction of fibres and further for the increase in the volume fraction of fibre the mechanical properties were slightly decreased. Key Words: Sisal, Banana, Coir, Epoxy, Hybrid composite.

Mechanical Properties of CNT Network-Reinforced Polymer Composites

2020 ◽  
pp. 75-105
Author(s):  
Sushant Sharma ◽  
Abhishek Arya ◽  
Sanjay R. Dhakate ◽  
Bhanu Pratap Singh
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Reinforced Polymer

scholarly journals Processing and Mechanical Behavior of Banana Fibre Reinforced Epoxy based Composite with Alumina and silicon Carbide

2021 ◽  
pp. 434-441
Author(s):  
Kaushal Arrawatia ◽  
Kedar Narayan Bairwa ◽  
Raj Kumar
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Glass Fibre ◽  
High Strength ◽  
Fibre Reinforcement ◽  
Fixed Amount ◽  
Reinforced Polymer ◽  
Banana Fibre ◽  
Percentage Weight ◽  
Fibre Reinforced Polymer

Polymer composites have outstanding qualities such as high strength, flexibility, stiffness, and lightweight. Currently, research is being performed to develop innovative polymer composites that may be used in many operational situations and contain a variety of fibre and filler combinations. Banana fibre has low density compared to glass fibre and it is a lingo-cellulosic fibre having relatively good mechanical properties compared to glass fibre. Because of their outstanding qualities, banana fibre reinforced polymer composites are now widely used in various industries. The primary goal of this study is to determine the effect of the wt.% of banana fibre, the wt.% of SiC, and the wt.% of Al2O3 in banana fibre reinforcement composites on the mechanical and physical properties of banana fibre reinforcement composites. Tensile strength and flexural strength of unfilled banana fibre epoxy composite increased with the increase in wt. of banana fibre from 0 wt.% to 12 wt.%. Further, an increase in wt.% banana fibre drop in mechanical property was observed. It has been concluded from the study that the variation in percentage weight of filler material with fixed amount (12 wt.%) of banana fibre affects the mechanical properties of filled banana reinforcement composites. Optimum mechanical properties were obtained for BHEC5 (72 wt.% Epoxy + Hardener, 12 wt.% banana fibre and 16 wt.% Al2O3).

The effect of environmental humidity/water absorption on tribo-mechanical performance of polymers and polymer composites – a review

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Kawaljit Singh Randhawa ◽  
Ashwin Patel
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Tribological Properties ◽  
Fiber Reinforced Polymer ◽  
Content Type ◽  
Wear Rates ◽  
Mechanical And Tribological Properties ◽  
Reinforced Polymer ◽  
Fiber Reinforced Polymer Composites ◽  
Water Conditions

Purpose The mechanical and tribological properties of polymers and polymer composites vary with different environmental conditions. This paper aims to review the influence of humidity/water conditions on various polymers and polymer composites' mechanical properties and tribological behaviors. Design/methodology/approach The influence of humidity and water absorption on mechanical and tribological properties of various polymers, fillers and composites has been discussed in this paper. Tensile strength, modulus, yield strength, impact strength, COF and wear rates of polymer composites are compared for different environmental conditions. The interaction between the water molecules and hydrophobic polymers is also represented. Findings Pure polymer matrices show somewhat mixed behavior in humid environments. Absorbed moisture generally plasticizes the epoxies and polyamides and lowers the tensile strength, yield strength and modulus. Wear rates of PVC generally decrease in humid environments, while for polyamides, it increases. Fillers like graphite and boron-based compounds exhibit low COF, while MoS2 particulate fillers exhibit higher COF at high humidity and water conditions. The mechanical properties of fiber-reinforced polymer composites tend to decrease as the rate of humidity increases while the wear rates of fiber-reinforced polymer composites show somewhat mixed behavior. Particulate fillers like metals and advanced ceramics reinforced polymer composites exhibit low COF and wear rates as the rate of humidity increases. Originality/value The mechanical and tribological properties of polymers and polymer composites vary with the humidity value present in the environment. In dry conditions, wear loss is determined by the hardness of the contacting surfaces, which may not effectively work for high humid environments. The tribological performance of composite constituents, i.e. matrix and fillers in humid environments, defines the overall performance of polymer composite in said environments.

Mechanical Properties of Chemical Treated Jute Fiber Reinforced Polymer Composites

2020 ◽  
Vol 1002 ◽  
pp. 75-83
Author(s):  
Wafaa Mahdi Salih
Keyword(s):  
Mechanical Properties ◽  
Polymer Composites ◽  
Fiber Length ◽  
Natural Fiber ◽  
Low Cost ◽  
Jute Fiber ◽  
Reinforced Polymer ◽  
Fiber Reinforced Polymer Composites ◽  
The Relationship ◽  
Pmma Polymer

Using PMMA Polymer reinforced by Natural Fiber (N.F.) materials have established much consideration because of several advantages for example low cost, non-abrasive, lightweight, non-toxic and the properties of bio-degradable. many kinds of research have been done in the recent usage of the natural reinforcing material to the preparation of different types of composites. Chemically treated jute fiber can enhance the surface of the fiber, decrease the absorption technique, and improve the roughness surface.in this research, pre-chemical treated in different lengths of jute- fibers in PMMA polymer-composites has been considered. Also, the effect of chemical treatment on mechanical properties of jute, jute reinforcing composite has been conferred. The results showed that the tensile strength T.S. of the treated in benzoylate solutions (4 mm) length fiber had good indicate to better interlocking between composite contents.Flexural-Strength F.S. of the-alkaline. solution treated (12 mm) length of fiber was obtained-better-results by increasing (16.5 %) compared with (2 mm) fiber-length. The fracture of the samples has discussed the relationship between composite adhesion. Impact Strength I.S. of the alkaline-treated (8,12 mm) fiber- a length that is due to to.better mechanical - interlocking between composite materials. The 2 mm fiber – length was not suitable-PMMA/ Jute composite in these tested for treated and untreated chemicals

Sign in / Sign up

Export Citation Format

Share Document