scholarly journals Assessment of Prediction Capabilities of COCOSYS and CFX Code for Simplified Containment

2016 ◽  
Vol 2016 ◽  
pp. 1-8
Author(s):  
Jia Zhu ◽  
Xiaohui Zhang ◽  
Xu Cheng
Keyword(s):  
Boundary Condition ◽  
Heat Source ◽  
Nuclear Power ◽  
Power Plants ◽  
Vertical Direction ◽  
Temperature Stratification ◽  
Severe Accident ◽  
Convection Boundary Condition ◽  
Convection Boundary ◽  
Adiabatic Boundary Condition

The acceptable accuracy for simulation of severe accident scenarios in containments of nuclear power plants is required to investigate the consequences of severe accidents and effectiveness of potential counter measures. For this purpose, the actual capability of CFX tool and COCOSYS code is assessed in prototypical geometries for simplified physical process-plume (due to a heat source) under adiabatic and convection boundary condition, respectively. Results of the comparison under adiabatic boundary condition show that good agreement is obtained among the analytical solution, COCOSYS prediction, and CFX prediction for zone temperature. The general trend of the temperature distribution along the vertical direction predicted by COCOSYS agrees with the CFX prediction except in dome, and this phenomenon is predicted well by CFX and failed to be reproduced by COCOSYS. Both COCOSYS and CFX indicate that there is no temperature stratification inside dome. CFX prediction shows that temperature stratification area occurs beneath the dome and away from the heat source. Temperature stratification area under adiabatic boundary condition is bigger than that under convection boundary condition. The results indicate that the average temperature inside containment predicted with COCOSYS model is overestimated under adiabatic boundary condition, while it is underestimated under convection boundary condition compared to CFX prediction.

scholarly journals A decision-support approach to severe accident management in nuclear power plants

2020 ◽  
pp. 1-12
Author(s):  
Marko Bohanec ◽  
Ivan Vrbanić ◽  
Ivica Bašić ◽  
Klemen Debelak ◽  
Luka Štrubelj
Keyword(s):  
Decision Support ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Severe Accident ◽  
Accident Management

scholarly journals A Conceptual Approach to Eliminate Bypass Release of Fission Products by In-Containment Relief Valve under SGTR Accident

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
Taeseok Kim ◽  
Wonjun Choi ◽  
Joongoo Jeon ◽  
Nam Kyung Kim ◽  
Hoichul Jung ◽  
...  
Keyword(s):  
Steam Generator ◽  
Nuclear Power ◽  
Power Plants ◽  
Fission Products ◽  
Mitigation Strategies ◽  
Severe Accident ◽  
Base Case ◽  
Conceptual Approach ◽  
Relief Valve ◽  
Radioactive Nuclides

During a hypothesized severe accident, a containment building is designed to act as a final barrier to prevent release of fission products to the environment in nuclear power plants. However, in a bypass scenario of steam generator tube rupture (SGTR), radioactive nuclides can be released to environment even if the containment is not ruptured. Thus, thorough mitigation strategies are needed to prevent such unfiltered release of the radioactive nuclides during SGTR accidents. To mitigate the consequence of the SGTR accident, this study was conducted to devise a conceptual approach of installing In-Containment Relief Valve (ICRV) from steam generator (SG) to the free space in the containment building and it was simulated by MELCOR code for numerical analysis. Simulation results show that the radioactive nuclides were not released to the environment in the ICRV case. However, the containment pressure increased more than the base case, which is a disadvantage of the ICRV. To minimize the negative effects of the ICRV, the ICRV linked to Reactor Drain Tank (RDT) and cavity flooding was performed. Because the overpressurization of containment is due to heat of ex-vessel corium, only cavity flooding was effective for depressurization. The conceptual design of the ICRV is effective in mitigating the SGTR accident.

Analyzing Droplet Size Distributions Inside a Self-Priming Venturi Scrubber for Filtered Containment Venting Systems

2018 ◽  
Author(s):  
P. Papadopoulos ◽  
T. Lind ◽  
H.-M. Prasser
Keyword(s):  
Droplet Size ◽  
High Speed ◽  
Nuclear Power ◽  
Power Plants ◽  
Gas Flow ◽  
Tube Bundle ◽  
Droplet Size Distribution ◽  
Severe Accident ◽  
Design Element ◽  
Venturi Scrubber

After the accident in the Fukushima Daiichi nuclear power plant, the interest of adding Filtered Containment Venting Systems (FCVS) on existing nuclear power plants to prevent radioactive releases to the environment during a severe accident has increased. Wet scrubbers are one possible design element which can be part of an FCVS system. The efficiency of this scrubber type is thereby depending, among others, on the thermal-hydraulic characteristics inside the scrubber. The flow structure is mainly established by the design of the gas inlet nozzle. The venturi geometry is one of the nozzle types that can be found in nowadays FCVS. It acts in two different steps on the removal process of the contaminants in the gas stream. Downstream the suction opening in the throat of the venturi, droplets are formed by atomization of the liquid film. The droplets are contributing to the capture of aerosols and volatile gases from the mixture coming from the containment. Studies state that the majority of the contaminants is scrubbed within this misty flow regime. At the top of the venturi, the gas stream is injected into the pool. The pressure drop at the nozzle exit leads to the formation of smaller bubbles, thus increasing the interfacial area concentration in the pool. In this work, the flow inside a full-scale venturi scrubber has been optically analyzed using shadowgraphy with a high-speed camera. The venturi nozzle was installed in the TRISTAN facility at PSI which was originally designed to investigate the flow dynamics of a tube rupture inside a full-length scale steam generator tube bundle. The data analysis was focused on evaluating the droplet size distribution and the Sauter mean diameter under different gas flow rates and operation modes. The scrubber was operated in two different ways, submerged and unsubmerged. The aim was to include the effect on the droplet sizes of using the nozzle in a submerged operation mode.

scholarly journals Spreading of Excellence in SARNET Network on Severe Accidents: The Education and Training Programme

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Sandro Paci ◽  
Jean-Pierre Van Dorsselaere
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Training Programme ◽  
Education And Training ◽  
Severe Accident ◽  
Research Network ◽  
Safety Issues ◽  
Severe Accidents ◽  
Management Procedures ◽  
And Training

The SARNET2 (severe accidents Research NETwork of Excellence) project started in April 2009 for 4 years in the 7th Framework Programme (FP7) of the European Commission (EC), following a similar first project in FP6. Forty-seven organisations from 24 countries network their capacities of research in the severe accident (SA) field inside SARNET to resolve the most important remaining uncertainties and safety issues on SA in water-cooled nuclear power plants (NPPs). The network includes a large majority of the European actors involved in SA research plus a few non-European relevant ones. The “Education and Training” programme in SARNET is a series of actions foreseen in this network for the “spreading of excellence.” It is focused on raising the competence level of Master and Ph.D. students and young researchers engaged in SA research and on organizing information/training courses for NPP staff or regulatory authorities (but also for researchers) interested in SA management procedures.

Study on Forced Convection Boundary Condition for Subcooled Water in the Simulation of Line-Heating Process

2006 ◽  
Vol 22 (01) ◽  
pp. 41-47
Author(s):  
Wang Ji ◽  
Liu Yujun ◽  
Ji Zhuoshang ◽  
Deng Yanping ◽  
Zhang Jun
Keyword(s):  
Boundary Condition ◽  
Forced Convection ◽  
Great Influence ◽  
Nucleate Boiling ◽  
Heating Process ◽  
Convection Coefficient ◽  
Line Heating ◽  
Subcooled Water ◽  
Convection Boundary Condition ◽  
Convection Boundary

In the simulation of line-heating process, the convection boundary condition, especially the subcooled water forced convection, has great influence on the result. The calculation of the convection coefficient is a difficult problem in the simulation. This paper uses the theory of forced convection boiling to study subcooled water forced convection during the line-heating process. By solving the wall temperatures of originating nucleate boiling and critical heat flux for subcooled water and comparing the plate temperature with these two wall temperatures, the status of water can be determined, and then the corresponding convection coefficient is calculated. The simulation results show that the precision of the forced convection boiling boundary condition presented in this paper is much better than that of a boundary condition based on the pool boiling curve.

Reliability Monitor for PWR Safety System Using FMEA and Go-Flow Methodology: Application of Risk Monitor for Nuclear Power Plants

2013 ◽  
Author(s):  
Muhammad Hashim ◽  
Hidekazu Yoshikawa ◽  
Takeshi Matsuoka ◽  
Ming Yang
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Fault Tree Analysis ◽  
Reliability Evaluation ◽  
Safety System ◽  
Severe Accident ◽  
Monitor System ◽  
Dynamic Reliability ◽  
Defense In Depth ◽  
Risk Monitor

Author’s proposed risk monitor system of Nuclear Power Plant (NPP) is based on the idea of Plant Defense-in-Depth (DiD) risk monitor and reliability monitor to monitor what degree of safety functions incorporated in the plant system is maintained by multiple barriers of Defense-in-Depth (DiD). In the risk monitor system, the range of risk state is not limited in core damage accident but includes all kinds of dangerous states brought by severe accident. In present study, method of the reliability monitor of a risk monitor system is applied to the PWR safety system in order to evaluate the risk state numerically by pursuing all conditions of reliability evaluation given by plant DiD risk monitor. Large break LOCA is taken as an initiating accident event and the implementation of method of the reliability monitor is discussed in detail for single loop PWR safety system by considering the Multilevel Flow Model (MFM), Failure Mode and Effect Analysis (FMEA), and the qualitative reliability evaluation by Fault Tree Analysis (FTA) and the dynamic reliability evaluation by GO-FLOW. The summary of reliability results of PWR safety subsystems are also presented.

Proposal for Evaluation With Strain-Based Criterion of Impact Phenomena Between Steel Structure and Tornado Missile

2016 ◽  
Author(s):  
Yuko Sakamoto ◽  
Koji Shirai ◽  
Toshiko Udagawa ◽  
Shunsuke Kondo
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Impact Analysis ◽  
Structural Integrity ◽  
Steel Structures ◽  
Severe Accident ◽  
Numerical Code ◽  
Pressurized Water ◽  
Impact Phenomena ◽  
The Impact

In Japan, nuclear power plants must be protected from tornado missiles that are prescribed by Nuclear Regular Authority (NRA). When evaluating the structural integrity of steel structures in the plant with impact analysis by numerical code, strain-based criteria are appropriate because the tornado missiles have huge impact energy and may cause large deformation of the structures. As one of the strain-based criteria, the Japan Society of Mechanical Engineers (JSME) prescribes limiting triaxial strain for severe accident of Pressurized Water Reactor (PWR) steel containment. To confirm whether or not this criterion is appropriate to the evaluation of the impact phenomena between the steel structures and the tornado missiles, a free drop impact experiment to steel plates (carbon steel and austenitic stainless steel) was carried out with heavy weights imitated on one of the tornado missiles, followed by an impact analysis of the experiment with AUTODYN code and the JSME strain-based criterion. Consequently, it was confirmed that the strain-based criterion of JSME standard was for evaluating the fracture of steel structures caused by tornado missiles.

Sign in / Sign up

Export Citation Format

Share Document