scholarly journals Knock Detection in Spark Ignition Engines Base on Complementary Ensemble Empirical Mode Decomposition-Hilbert Transform

2016 ◽  
Vol 2016 ◽  
pp. 1-17 ◽  
Author(s):  
Fengrong Bi ◽  
Teng Ma ◽  
Jian Zhang ◽  
Lin Li ◽  
Chunfang Shi
Keyword(s):  
Hilbert Transform ◽  
Spark Ignition ◽  
Ensemble Empirical Mode Decomposition ◽  
Cylinder Block ◽  
Spark Ignition Engines ◽  
Cylinder Pressure ◽  
Vibration Signals ◽  
Mode Decomposition ◽  
Engine Cylinder ◽  
Knock Detection

In spark ignition engines, knock onset limits the maximum spark advance. An inaccurate identification of this limit penalises the fuel conversion efficiency. Thus knock feature extraction is the key of closed-loop control of ignition in spark ignition engine. This paper reports an investigation of knock detection in spark ignition (SI) engines using CEEMD-Hilbert transform based on the engine cylinder pressure signals and engine cylinder block vibration signals. Complementary Ensemble Empirical Mode Decomposition (CEEMD) was used to decompose the signal and detect knock characteristic. Hilbert transform was used to analyze the frequency information of knock characteristic. The result shows that, for both of cylinder pressure signals and vibration signals, the CEEMD algorithm could extract the knock characteristic, and the Hilbert transform result shows that the energy of knock impact areas has the phenomenon of frequency concentration in both cylinder pressure signal and cylinder block vibration signal. At last, the knock window is then determined, based on which a new knock intensity evaluation factorKis propose, and it can accurately distinguish between heavy knock, light knock, and normal combustion three states.

scholarly journals Analysis method of the cavitation vibration signals in poppet valve based on EEMD

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402199811
Author(s):  
Beibei Li ◽  
Qiao Zhao ◽  
Huaiyi Li ◽  
Xiumei Liu ◽  
Jichao Ma ◽  
...  
Keyword(s):  
Ensemble Empirical Mode Decomposition ◽  
Center Frequency ◽  
Analysis Method ◽  
Vibration Signals ◽  
Poppet Valve ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Cavitation Intensity ◽  
Eemd Method ◽  
Peak Value

To study the vibration characteristics of the poppet valve induced by cavitation, the signal analysis method based on the ensemble empirical mode decomposition (EEMD) method was studied experimentally. The component induced by cavitation was separated from the vibration signals through the EEMD method. The results show that the IMF2 component has the largest amplitude and energy of all components. The root mean square (RMS) value, peak value of marginal spectrum, and center frequency of marginal spectrum of the IMF2 component were studied in detail. The RMS value and the peak value of the marginal spectrum decrease with a decrease of cavitation intensity. The center frequency of marginal spectrum is between 12 kHz and 20 kHz, and the center frequency first increases and then decreases with a decrease of cavitation intensity. The change rate of the center frequency also decreases with an increase of inlet pressure.

scholarly journals A Hydraulic Pump Fault Diagnosis Method Based on the Modified Ensemble Empirical Mode Decomposition and Wavelet Kernel Extreme Learning Machine Methods

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2599
Author(s):  
Zhenbao Li ◽  
Wanlu Jiang ◽  
Sheng Zhang ◽  
Yu Sun ◽  
Shuqing Zhang
Keyword(s):  
Fault Diagnosis ◽  
Extreme Learning Machine ◽  
Recognition Accuracy ◽  
Ensemble Empirical Mode Decomposition ◽  
Hydraulic Pump ◽  
Vibration Signals ◽  
Mode Decomposition ◽  
Diagnosis Method ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

To address the problem that the faults in axial piston pumps are complex and difficult to effectively diagnose, an integrated hydraulic pump fault diagnosis method based on the modified ensemble empirical mode decomposition (MEEMD), autoregressive (AR) spectrum energy, and wavelet kernel extreme learning machine (WKELM) methods is presented in this paper. First, the non-linear and non-stationary hydraulic pump vibration signals are decomposed into several intrinsic mode function (IMF) components by the MEEMD method. Next, AR spectrum analysis is performed for each IMF component, in order to extract the AR spectrum energy of each component as fault characteristics. Then, a hydraulic pump fault diagnosis model based on WKELM is built, in order to extract the features and diagnose faults of hydraulic pump vibration signals, for which the recognition accuracy reached 100%. Finally, the fault diagnosis effect of the hydraulic pump fault diagnosis method proposed in this paper is compared with BP neural network, support vector machine (SVM), and extreme learning machine (ELM) methods. The hydraulic pump fault diagnosis method presented in this paper can diagnose faults of single slipper wear, single slipper loosing and center spring wear type with 100% accuracy, and the fault diagnosis time is only 0.002 s. The results demonstrate that the integrated hydraulic pump fault diagnosis method based on MEEMD, AR spectrum, and WKELM methods has higher fault recognition accuracy and faster speed than existing alternatives.

scholarly journals Gearbox Fault Diagnosis Using Complementary Ensemble Empirical Mode Decomposition and Permutation Entropy

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Liye Zhao ◽  
Wei Yu ◽  
Ruqiang Yan
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Correlation Coefficients ◽  
Ensemble Empirical Mode Decomposition ◽  
Permutation Entropy ◽  
Support Vector ◽  
Svm Classifier ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition

This paper presents an improved gearbox fault diagnosis approach by integrating complementary ensemble empirical mode decomposition (CEEMD) with permutation entropy (PE). The presented approach identifies faults appearing in a gearbox system based on PE values calculated from selected intrinsic mode functions (IMFs) of vibration signals decomposed by CEEMD. Specifically, CEEMD is first used to decompose vibration signals characterizing various defect severities into a series of IMFs. Then, filtered vibration signals are obtained from appropriate selection of IMFs, and correlation coefficients between the filtered signal and each IMF are used as the basis for useful IMFs selection. Subsequently, PE values of those selected IMFs are utilized as input features to a support vector machine (SVM) classifier for characterizing the defect severity of a gearbox. Case study conducted on a gearbox system indicates the effectiveness of the proposed approach for identifying the gearbox faults.

A Modified EEMD Decomposition for the Detection of Rolling Bearing Faults

2014 ◽  
Vol 548-549 ◽  
pp. 369-373
Author(s):  
Yuan Cheng Shi ◽  
Yong Ying Jiang ◽  
Hai Feng Gao ◽  
Jia Wei Xiang
Keyword(s):  
Rolling Bearing ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Hilbert Spectrum ◽  
Bearing Faults ◽  
Mode Decomposition ◽  
Fault Features ◽  
Rolling Element ◽  
Inner Race

The vibration signals of rolling element bearings are non-linear and non-stationary and the corresponding fault features are difficult to be extracted. EEMD (Ensemble empirical mode decomposition) is effective to detect bearing faults. In the present investigation, MEEMD (Modified EEMD) is presented to diagnose the outer and inner race faults of bearings. The original vibration signals are analyzed using IMFs (intrinsic mode functions) extracted by MEEMD decomposition and Hilbert spectrum in the proposed method. The numerical and experimental results of the comparison between MEEMD and EEMD indicate that the proposed method is more effective to extract the fault features of outer and inner race of bearings than EEMD.

scholarly journals Mechanical Fault Diagnosis for HV Circuit Breakers Based on Ensemble Empirical Mode Decomposition Energy Entropy and Support Vector Machine

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Jianfeng Zhang ◽  
Mingliang Liu ◽  
Keqi Wang ◽  
Laijun Sun
Keyword(s):  
Support Vector Machine ◽  
Fault Diagnosis ◽  
Circuit Breaker ◽  
Vibration Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Support Vector ◽  
Time Segment ◽  
Vibration Signals ◽  
Equal Time ◽  
Mode Decomposition

During the operation process of the high voltage circuit breaker, the changes of vibration signals can reflect the machinery states of the circuit breaker. The extraction of the vibration signal feature will directly influence the accuracy and practicability of fault diagnosis. This paper presents an extraction method based on ensemble empirical mode decomposition (EEMD). Firstly, the original vibration signals are decomposed into a finite number of stationary intrinsic mode functions (IMFs). Secondly, calculating the envelope of each IMF and separating the envelope by equal-time segment and then forming equal-time segment energy entropy to reflect the change of vibration signal are performed. At last, the energy entropies could serve as input vectors of support vector machine (SVM) to identify the working state and fault pattern of the circuit breaker. Practical examples show that this diagnosis approach can identify effectively fault patterns of HV circuit breaker.

Sign in / Sign up

Export Citation Format

Share Document