scholarly journals The Synergistic Effect of Leukocyte Platelet-Rich Fibrin and Micrometer/Nanometer Surface Texturing on Bone Healing around Immediately Placed Implants: An Experimental Study in Dogs

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Rodrigo F. Neiva ◽  
Luiz Fernando Gil ◽  
Nick Tovar ◽  
Malvin N. Janal ◽  
Heloisa Fonseca Marao ◽  
...  
Keyword(s):  
Bone Healing ◽  
Mixed Model ◽  
Surface Texturing ◽  
Contralateral Side ◽  
Nanometer Scale ◽  
Textured Surface ◽  
Beagle Dogs ◽  
Implant Surface ◽  
Mixed Model Anova ◽  
Micrometer Scale

Aims. This study evaluated the effects of L-PRF presence and implant surface texture on bone healing around immediately placed implants.Methods. The first mandibular molars of 8 beagle dogs were bilaterally extracted, and implants (Blossom™, Intra-Lock International, Boca Raton, FL) were placed in the mesial or distal extraction sockets in an interpolated fashion per animal. Two implant surfaces were distributed per sockets: (1) dual acid-etched (DAE, micrometer scale textured) and (2) micrometer/nanometer scale textured (Ossean™ surface). L-PRF (Intraspin system, Intra-Lock International) was placed in a split-mouth design to fill the macrogap between implant and socket walls on one side of the mandible. The contralateral side received implants without L-PRF. A mixed-model ANOVA (atα=0.05) evaluated the effect of implant surface, presence of L-PRF, and socket position (mesial or distal), individually or in combination on bone area fraction occupancy (BAFO).Results. BAFO values were significantly higher for the Ossean relative to the DAE surface on the larger mesial socket. The presence of L-PRF resulted in higher BAFO. The Ossean surface and L-PRF presence resulted in significantly higher BAFO.Conclusion.L-PRF and the micro-/nanometer scale textured surface resulted in increased bone formation around immediately placed implants.

Nanometer-scale features on micrometer-scale surface texturing: A bone histological, gene expression, and nanomechanical study

Bone ◽  
2014 ◽  
Vol 65 ◽  
pp. 25-32 ◽  
Author(s):  
Paulo G. Coelho ◽  
Tadahiro Takayama ◽  
Daniel Yoo ◽  
Ryo Jimbo ◽  
Sanjay Karunagaran ◽  
...  
Keyword(s):  
Gene Expression ◽  
Surface Texturing ◽  
Nanometer Scale ◽  
Micrometer Scale ◽  
Scale Surface

scholarly journals Surface modifications of Ti6Al4V by a picosecond Nd:YAG laser

2009 ◽  
Vol 27 (1) ◽  
pp. 85-90 ◽  
Author(s):  
M.S. Trtica ◽  
B.B. Radak ◽  
B.M. Gakovic ◽  
D.S. Milovanovic ◽  
D. Batani ◽  
...  
Keyword(s):  
Nd:Yag Laser ◽  
Surface Modifications ◽  
Surface Damage ◽  
Nanometer Scale ◽  
Implant Surface ◽  
Periodic Surface ◽  
Bio Compatibility ◽  
Micrometer Scale ◽  
532 Nm ◽  
Pulse Count

AbstractInteraction of a Nd:YAG laser, operating at wavelengths of 1064 nm (23.6 J cm−2 fluence) or 532 nm (25.9 J cm−2 fluence), and pulse duration of 40 ps, with a titanium-based medical implant Ti6Al4V alloy was studied. Surface damage thresholds were estimated to be 0.9 J cm−2 and 0.25 J cm−2 at laser wavelengths 1064 nm and 532 nm, respectively. At both laser wavelengths, the energy absorbed was mostly converted into thermal energy, forming craters, albeit about 50 times deeper at 1064 nm than at 532 nm. Periodic surface structures (PSS) were also formed with both laser wavelengths, concentric, and radial at micrometer scale (3 µm to 15 µm period), parallel at nanometer scale (800 nm period with the 1064 nm laser, 400 nm with the 532 nm laser). In the case of the 532 nm laser, the concentric structures enlarge their period with accumulating laser pulse count. These features can help roughening of the implant surface and improve bio-compatibility.

scholarly journals 109 Phytate supplementation has minimal impact on mineral digestibility in horses

2020 ◽  
Vol 98 (Supplement_4) ◽  
pp. 89-90
Author(s):  
Katy Brinkley-Bissinger ◽  
Laura M Cersosimo ◽  
Kathleen E Sullivan ◽  
Shannon E Livingston ◽  
Jill M Bobel ◽  
...  
Keyword(s):  
Inductively Coupled Plasma ◽  
Mixed Model ◽  
Divalent Cations ◽  
Basal Diet ◽  
Minimal Impact ◽  
Inductively Coupled ◽  
Mixed Model Anova ◽  
Microbial Phytase ◽  
And Performance ◽  
Inorganic Mineral

Abstract Phosphorus in equine rations is supplied by inorganic mineral fortification or naturally-occurring P in forages and grains. Up to 70% of P in plant material is bound to phytate. In monogastrics like poultry and swine, phytate can reduce absorption of P and divalent cations, but the extent that this occurs in horses is unknown. This study tested the hypothesis that phytate decreases mineral digestibility in horses. Six mature Quarter Horse geldings (mean ± SE, 586 ± 19 kg, 10 ± 1.5 y) were randomly assigned to two treatments applied in a cross-over design: IP6 (Ca-Mg-phytate isolated from rice bran fed at 15 mg phytic acid/kg BW) or CON (equivalent Ca, Mg and P from inorganic minerals to match intake from IP6). The level of phytate added represented an amount present in grain-rich rations typically fed to broodmares, growing horses and performance athletes. Supplements were added to a basal diet (1.75% BW, DM basis) consisting of 75% timothy hay and 25% roughage-based concentrate. Each 14-d period had an 11-d treatment adaptation followed by a 3-d total fecal collection. After acid digestion, P was determined colorimetrically and other minerals were determined by inductively coupled plasma spectrometry. Data were analyzed using mixed model ANOVA. Intakes of Ca, P, Mg, Zn, Cu and Fe were similar between treatments (140, 72, 40, 1.05, 0.24, and 1.78 mg/kg BW respectively). Apparent P digestibility (18.8 and 17%, SEM 1.9; P = 0.41) and estimates of true P digestibility (32.8 and 30.8%, SEM 1.9; P = 0.39) were similar between CON and IP6. Apparent digestibilities of other minerals were also not affected by IP6 supplementation. Findings suggest horses have sufficient microbial phytase activity in the gastrointestinal tract to mitigate impacts of dietary phytate. Higher levels or different forms of phytate and marginal mineral intake may yield different results.

scholarly journals Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components?

Friction ◽  
2021 ◽  
Author(s):  
Chia-Jui Hsu ◽  
Andreas Stratmann ◽  
Simon Medina ◽  
Georg Jacobs ◽  
Frank Mücklich ◽  
...  
Keyword(s):  
Boundary Lubrication ◽  
Surface Texturing ◽  
Contact Stresses ◽  
Laser Surface ◽  
Laser Surface Texturing ◽  
Wear Loss ◽  
Textured Surface ◽  
Periodic Patterns ◽  
Rolling Bearings ◽  
Fatigue Lifetime

AbstractLaser surface texturing (LST) has been proven to improve the tribological performance of machine elements. The micro-scale patterns manufactured by LST may act as lubricant reservoirs, thus supplying oil when encountering insufficient lubrication. However, not many studies have investigated the use of LST in the boundary lubrication regime, likely due to concerns of higher contact stresses that can occur with the increasing surface roughness. This study aims to examine the influence of LST on the fatigue lifetime of thrust rolling bearings under boundary lubrication. A series of periodic patterns were produced on the thrust rolling bearings, using two geometrically different designs, namely cross and dimple patterns. Base oil ISO VG 100 mixed with 0.05 wt% P of zinc dialkyldithiophosphate (ZDDP) was supplied. The bearings with cross patterns reduce the wear loss by two orders of magnitude. The patterns not only retain lubricant in the textured pockets but also enhance the formation of an anti-wear tribofilm. The tribofilm generation may be improved by the higher contact stresses that occur when using the textured surface. Therefore, in contrast to the negative concerns, the ball bearings with cross patterns were instead found to increase the fatigue life by a factor of three.

Effectiveness of multi-shape laser surface texturing in the reduction of friction under lubrication regime

2016 ◽  
Vol 68 (1) ◽  
pp. 116-124 ◽  
Author(s):  
Dawit Zenebe Segu ◽  
Pyung Hwang
Keyword(s):  
Hydrodynamic Lubrication ◽  
Surface Texturing ◽  
Laser Surface ◽  
Laser Surface Texturing ◽  
Textured Surface ◽  
Content Type ◽  
Laser Ablation Process ◽  
Specific Formula ◽  
Steel Surfaces ◽  
Lubrication Conditions

Purpose – The purpose of this paper is to investigate and discuss the effect of multi-shape laser surface texturing (LST) steel surfaces on tribological performance. Design/methodology/approach – The textured surface with some specific formula arrays was fabricated by laser ablation process by combining patterns of circles and triangles, circles and squares and circles and ellipses. The tribological test was performed by a flat-on-flat tribometer under dry and lubrication conditions, and results were compared with that of untextured surface. Findings – The results showed that the textured surface had better friction coefficient performance than the untextured surface due to hydrodynamic lubrication effect. Through an increase in sliding speed, the beneficial effect of LST performance was achieved under dry and lubrication conditions. Originality/value – This paper develops multi-shape LST steel surfaces for improving the friction and wear performance under dry and lubrication conditions.

Numerical and experimental study on the effect of surface texture with roughness orientation considered under a mixed lubrication state

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Junru Wang ◽  
Quandai Wang ◽  
Yueyan Li ◽  
Meiling Guo ◽  
Pengyang Li ◽  
...  
Keyword(s):  
Surface Texture ◽  
Surface Texturing ◽  
Mixed Lubrication ◽  
Laser Surface ◽  
Geometric Parameters ◽  
Laser Surface Texturing ◽  
Textured Surface ◽  
Asperity Contact ◽  
Content Type ◽  
Texture Parameters

Purpose The purpose of this paper is to investigate the effects of surface texture with roughness orientation considered on tribological properties under a mixed lubrication state numerically and experimentally. Design/methodology/approach Based on the average Reynolds equation and asperity contact model, the impacts of surface texture parameters and roughness orientation on lubrication properties have been calculated using finite difference method. Tin–bronze samples with various prescribed surface texture geometric parameters and roughness orientation were fabricated by laser surface texturing technique, and the tribology performance of the textured surface was studied experimentally. Findings The effects of surface geometric parameters and roughness orientation parameters have been discerned. The experimental observations are in good agreement with the numerical prediction, which suggests that the numerical scheme adopted in this work is suitable in capturing the surface texture and roughness effect under mixed lubrication state. Originality/value By meticulously controlling the surface roughness and surface texture geometric characteristics based on the laser surface texturing process, samples with prescribed surface texture parameters and roughness orientation consistent with that in theoretical studies were fabricated and the theoretical model and results were verified experimentally.

PSV-B-18 Characterization of the fecal microbiome of healthy adult beagle dogs supplemented with graded levels of bacillus coagulans GBI-30, 6086

2021 ◽  
Vol 99 (Supplement_3) ◽  
pp. 337-338
Author(s):  
Heather L Acuff ◽  
Tara N Gaire ◽  
Tyler Doerksen ◽  
Andrea Lu ◽  
Michael P Hays ◽  
...  
Keyword(s):  
Relative Abundance ◽  
Fixed Effects ◽  
Mixed Model ◽  
Healthy Adult ◽  
Random Effect ◽  
Bacillus Coagulans ◽  
Community Diversity ◽  
Rrna Gene ◽  
Beagle Dogs ◽  
Fecal Microbiome

Abstract This study aimed to evaluate the effect of Bacillus coagulans GBI-30, 6086 on the fecal microbiome of healthy adult dogs. Extruded diets containing graded levels of probiotic applied either to the base ration before extrusion or as a topical coating post-extrusion were randomly assigned to ten individually-housed Beagle dogs (7 castrated males, 3 spayed females) of similar age (5.75 ± 0.23 yr) and body weight (12.3 ± 1.5 kg) in a 5 x 5 replicated Latin square with 16-d adaptation and 5-d total fecal collection for each period. Five dietary treatments were formulated to deliver a dose of 0-, 6-, 7-, 8-, or 9-log10 CFU·dog-1·d-1. Fresh fecal samples (n=50) were analyzed by 16S rRNA gene pyrosequencing. Community diversity was evaluated in R (v4.0.3, R Core Team, 2019). Relative abundance data were analyzed using a mixed model (v9.4, SAS Institute, Inc., Cary, NC) with treatment and period as fixed effects and dog as a random effect. Results were considered significant at P < 0.05. Predominant phyla were Firmicutes (mean 81.2% ± 5), Actinobacteria (mean 9.9% ± 4.4), Bacteroidetes (mean 4.5% ± 1.7), Proteobacteria (mean 1.3% ± 0.7), and Fusobacteria (mean 1.1% ± 0.6). No evidence of shifts in predominant phyla, class, family, or genus taxonomic levels were observed except for the Bacillus genus, which had a greater relative abundance (P = 0.0189) in the low probiotic coating and high probiotic coating treatment groups compared to the extruded probiotic group. Alpha-diversity indices (Richness, Chao1, ACE, Shannon, Simpson, Inverse Simpson, and Fisher) and beta-diversity metrics (principal coordinate analysis and multi-dimensional scaling) were similar for all treatments. This data indicates that supplementation with Bacillus coagulans GBI-30, 6086 at a dose of up to 9 log10 CFU·d-1 did not alter the overall diversity of the fecal microbiome of healthy adult dogs over a 21-d period.

scholarly journals Multidisciplinary Evaluation of Pacifier Removal on Oro-Dentofacial Structures: A Controlled Clinical Trial

2021 ◽  
Vol 9 ◽  
Author(s):  
Kelly Guedes de Oliveira Scudine ◽  
Camila Nobre de Freitas ◽  
Kizzy Silva Germano Nascimento de Moraes ◽  
Silvana Bommarito ◽  
Rosana de Fátima Possobon ◽  
...  
Keyword(s):  
Clinical Trial ◽  
Mixed Model ◽  
Control Group ◽  
Controlled Clinical Trial ◽  
Functional Changes ◽  
Mixed Model Anova ◽  
And Function ◽  
Clinical Trials Registry ◽  
Facial Anthropometry ◽  
Over Time

It is well recognized that pacifier habit leads to occlusal and orofacial functional changes in children. However, the effects of the interruption of prolonged pacifier habit on the development of the dento-facial complex has not yet been fully characterized. Thus, the aim of this study was to investigate the influence of pacifier removal on aspects of oro-dentofacial morphology and function in preschool children. For that, a pacifier group (n = 28) and a control group (n = 32) of 4-year-old children with and without pacifier habit, respectively, were followed up by a group of dentists and speech therapists at baseline, 6 and 12 months after habit removal. Bite force and lip pressure were assessed using digital systems, and the evaluation of breathing and speech functions was performed using validated protocols, together with the measurements of dental casts and facial anthropometry. The Two-way mixed model ANOVA was used in data analysis. After 12 months, a decrease in malocclusion frequency was observed in pacifier group. Additionally, a change over time was observed in facial, intermolar and palate depth measurements, as well in bite and lip forces and speech function scores, increasing in both groups (p < 0.01). The upper and lower intercanine widths and breathing scores differed between groups at baseline and changed over time reducing the differences. The presence of speech distortions was more frequent in the pacifier group at baseline and decreased over time (p < 0.05). The interruption of pacifier habit improved the maxillary and mandibular intercanine widths, as well as the breathing and speech functions, overcoming the oro-dentofacial changes found.Trial Registration: This clinical trial was registered in the Brazilian Clinical Trials Registry (ReBEC; http://www.ensaiosclinicos.gov.br/), protocol no. RBR-728MJ2.

ATOMISTIC SCALE SIMULATION OF TEXTURED SURFACES ON DRY SLIDING FRICTION

2013 ◽  
Vol 37 (3) ◽  
pp. 927-936 ◽  
Author(s):  
Ming-Yuan Chen ◽  
Zheng-Han Hong ◽  
Te-Hua Fang ◽  
Shao-Hui Kang ◽  
Li-Min Kuo
Keyword(s):  
Sliding Friction ◽  
Surface Texturing ◽  
Dynamics Simulation ◽  
Embedded Atom Method ◽  
Textured Surface ◽  
Textured Surfaces ◽  
Many Body ◽  
Embedded Atom ◽  
Modified Embedded Atom Method ◽  
Body Potential

Fe sliding on a Fe substrate with surface texturing is investigated using molecular dynamics simulation. The modified embedded-atom method many-body potential is used to describe the interaction of Fe atoms. The tribological properties of surface texturing during nanosliding are discussed. Results indicate that a textured surface has lower friction than that of a flat surface. In addition, a surface with parallel grooves has lower friction than that of a dimpled surface. Hence, surface texturing greatly affects friction.

Sign in / Sign up

Export Citation Format

Share Document