scholarly journals Characterization of Silver NanoparticleIn SituSynthesis on Porous Sericin Gel for Antibacterial Application

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Gang Tao ◽  
Lina Liu ◽  
Yejing Wang ◽  
Huaipu Chang ◽  
Ping Zhao ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Irradiation Time ◽  
Inhibition Zone ◽  
Antimicrobial Activities ◽  
Scanning Calorimetry ◽  
Structure And Property ◽  
Gram Positive Bacteria ◽  
Synthesis Approach

Sericin fromBombyx moricocoon has good hydrophilicity, reaction activity, biocompatibility, and biodegradability, which has shown great potentials for biomedical materials. Here, an ultraviolet light-assistedin situsynthesis approach is developed to immobilize silver nanoparticles on the surface of sericin gel. The amount of silver nanoparticles immobilized on the surface of sericin gel could be regulated by the irradiation time. The porous structure and property of sericin gel were not affected by the modification of AgNPs, as evidenced by the observation of scanning electron microscopy, X-ray diffractometry, and Fourier transform infrared spectroscopy. Differential scanning calorimetry analysis showed that the modification of AgNPs increased the thermal stability of sericin gel. The growth curve of bacteria and inhibition zone assays suggested that the sericin gel modified with AgNPs had good antimicrobial activities against both Gram-negative and Gram-positive bacteria. This novel sericin has shown a great potential for biomedical purpose.

scholarly journals Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics

2000 ◽  
Vol 15 (7) ◽  
pp. 1617-1621 ◽  
Author(s):  
Jan Schroers ◽  
Konrad Samwer ◽  
Frigyes Szuecs ◽  
William L. Johnson
Keyword(s):  
Sessile Drop ◽  
Bulk Glass ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glass Forming ◽  
Processing Times ◽  
Thermal Stability Of

The reaction of the bulk glass forming alloy Zr41Ti14Cu12Ni10Be23 (Vit 1) with W, Ta, Mo, AlN, Al2O3, Si, graphite, and amorphous carbon was investigated. Vit 1 samples were melted and subsequently solidified after different processing times on discs of the different materials. Sessile drop examinations of the macroscopic wetting of Vit 1 on the discs as a function of temperature were carried out in situ with a digital optical camera. The reactions at the interfaces between the Vit 1 sample and the different disc materials were investigated with an electron microprobe. The structure and thermal stability of the processed Vit 1 samples were examined by x-ray diffraction and differential scanning calorimetry. The results are discussed in terms of possible applications for composite materials.

Nanocomposite cellulose fabrics with in situ generated silver nanoparticles by bioreduction method

2020 ◽  
pp. 152808372092473 ◽  
Author(s):  
Suchart Siengchin ◽  
Pawinee Boonyasopon ◽  
Vajja Sadanand ◽  
Anumakonda Varada Rajulu
Keyword(s):  
Silver Nanoparticles ◽  
Size Range ◽  
Low Cost ◽  
Aqueous Dispersion ◽  
X Ray Diffraction ◽  
X Ray ◽  
Gram Positive Bacteria ◽  
Bed Materials ◽  
Cellulose Fabrics

In the present work, nanocomposite cellulose fabrics with in situ generated silver nanoparticles were prepared by bioreduction method employing aqueous dispersion of low-cost natural turmeric powder as a reducing agent and different concentrated aqueous AgNO3 as source solutions. The prepared nanocomposite cellulose fabrics were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, and antibacterial tests. The nanocomposite cellulose fabrics had roughly spherical silver nanoparticles in the size range of 41–130 nm with an overall average of 78 nm. The X-ray analysis indicated the generation of both silver nanoparticles and Ag2O nanoparticles in the nanocomposite cellulose fabrics. The nanocomposite cellulose fabrics retained the generated AgNPs even after repeated detergent washings. The prepared nanocomposite cellulose fabrics exhibited excellent antibacterial activity against both the Gram-negative and Gram-positive bacteria and hence can be considered as antibacterial hospital-bed materials, apparels, etc.

scholarly journals The Preparation and Characterization of Polyacrylonitrile-Polyaniline (PAN/PANI) Fibers

Materials ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 664 ◽  
Author(s):  
Iwona Karbownik ◽  
Olga Rac-Rumijowska ◽  
Marta Fiedot-Toboła ◽  
Tomasz Rybicki ◽  
Helena Teterycz
Keyword(s):  
Specific Resistance ◽  
Strong Interactions ◽  
Mechanical Parameters ◽  
Dsc Analysis ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Strength Tests ◽  
Pan Fibers

The paper presents a method of modifying polyacrylonitrile (PAN) fibers using polyaniline (PANI). The PAN fibers were doped with polyaniline that was obtained in two different ways. The first consisted of doping a spinning solution with polyaniline that was synthesized in an aqueous solution (PAN/PANI blended), and the second involved the synthesis of polyaniline directly in the spinning solution (PAN/PANI in situ). The obtained fibers were characterized by the methods: X-ray powder diffraction (XRD), scanning electron microscope (SEM), fourier-transform infrared spectroscopy (FTIR), thermogravimetry (TG) and differential scanning calorimetry (DSC). Analysis of the results showed strong interactions between the nitrile groups of polyacrylonitrile and polyaniline in the PAN/PANI in situ fibers. The results of mechanical strength tests indicated that the performance of the PAN/PANI mixture significantly improved the mechanical parameters of polyaniline, although these fibers had a weaker strength than the unmodified PAN fibers. The fibers obtained as a result of the addition of PANI to PAN were dielectric, whereas the PANI-synthesized in situ were characterized by a mass-specific resistance of 5.47 kΩg/cm2.

Synthesis and characterization of composite polysulfone membranes for desalination in nanofiltration technique

2010 ◽  
Vol 62 (11) ◽  
pp. 2655-2663 ◽  
Author(s):  
A. Akbari ◽  
M. Homayonfal ◽  
V. Jabbari
Keyword(s):  
Acrylic Acid ◽  
Polyacrylic Acid ◽  
Graft Polymerization ◽  
Irradiation Time ◽  
Polymerization Process ◽  
Synthesis And Characterization ◽  
Porous Support ◽  
Ft Ir

Composite nanofiltration (NF) membrane was developed polyacrylic acid (PAA) in situ UV graft polymerization process using ultrafiltration (UF) polysulfone (PSF) membrane as porous support. FT-IR spectra indicated that grafting was performed and it show peaks at 1,732 cm−1 and 3,396 cm−1 region for CO and OH starching bond of acrylic acid (AA) monomer, respectively. AFM microscopy showed the roughness of surface was reduced by increase of UV irradiation times. Effect of irradiation time on the grafting of acrylic acid (AA) in the same concentration was discussed. The salts rejection increase was accompanied with grafting of polysulfone (PSF) ultrafiltration (UF) membrane. The rejection of Na2SO4, MgSO4, NaCl and CaCl2 salts by PSF-grafted-PAA nanofiltration (NF) membrane was in 98, 60, 52 and 30% respectively, under 0.3 MPa.

scholarly journals Effects of Chlorinated Polypropylene on the Conformation of Polypropylene in Polypropylene/Chlorinated Polypropylene/Polyaniline Composites

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Jianjun Chen ◽  
Yueyue Jia ◽  
Zhiye Zhang ◽  
Xinlong Wang ◽  
Lin Yang
Keyword(s):  
Intensity Ratio ◽  
Maximum Level ◽  
In Situ Ftir ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Infrared Band ◽  
X Ray ◽  
Polyaniline Composites

We investigated the changes in the conformation and crystalline structure of polypropylene (PP) using a combination of Fourier transform infrared spectroscopy (FTIR), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC) based on PP/chlorinated PP (CPP)/polyaniline (PANI) composites. The DSC heating thermograms and WAXD patterns of the PP/CPP/PANI composites showed that theβ-crystal was affected greatly by the CPP content. Characterization of the specific regularity in the infrared band variation showed that the conformational orders of the helical sequences in PP exhibited major changes that depended on the CPP content. Initially, the intensity ratio ofA840/A810increased with the CPP concentration and reached its maximum level when the CPP content was <13.22% before decreasing as the CPP content increased further. The effect of increased temperature on the conformation of PP was studied by in situ FTIR. Initially, the intensity ratio ofA999/A973decreased slowly with increasing the temperature up to 105°C before decreasing sharply with further increases in temperature and then decreasing slowly again when the temperature was higher than 128°C.

scholarly journals Synthesis of silver nanoparticles: double-green approach of using chitosan and microwave technique towards antimicrobial activity against pathogenic bacteria

2020 ◽  
Vol 10 (4) ◽  
pp. 5918-5922 ◽  
Keyword(s):  
Silver Nanoparticles ◽  
Pathogenic Bacteria ◽  
Size Range ◽  
Low Cost ◽  
Inhibition Zone ◽  
Antimicrobial Activities ◽  
Heterogeneous Distribution ◽  
E Coli ◽  
Green Approach ◽  
Dual Mechanism

A double green approach to the synthesis of silver nanoparticles using chitosan as a reducing agent and microwave radiation has been carried out in this study. Chitosan was extracted from marine crab carapace and the morphology of the produced chitosan was characterized using Scanning Electron Microscope (SEM). The production of silver nanoparticles (AgNPs) was monitored by the formation of surface plasmon resonance (SPR) at the λmax= 420 nm, indicates the reduction of the oxidation state of Ag+ to Ag0. The XRD data confirms the crystallinity nature of obtained AgNps, while the SEM and TEM revealed the formation of near-spherical shapes, polydisperse, heterogeneous distribution of AgNps with the size range between 7 to 25 nm. The antimicrobial activities of the AgNPs were investigated using The prepared AgNPs demonstrated dual mechanism action with chitosan, which acted as a stabilizer on the surface of AgNPs, and enhance the inhibition zone against E. tarda and E. coli. Therefore, the synthesized AgNPs in this study may have excellent potential for clinical application as it is green, low-cost and eco-friendly.

scholarly journals Biosynthesis and Characterization of Extracellular Silver Nanoparticles from Streptomyces aizuneusis: Antimicrobial, Anti Larval, and Anticancer Activities

Molecules ◽  
2021 ◽  
Vol 27 (1) ◽  
pp. 212
Author(s):  
Hemmat M. Abd-Elhady ◽  
Mona A. Ashor ◽  
Abdelkader Hazem ◽  
Fayez M. Saleh ◽  
Samy Selim ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Human Lung ◽  
Spherical Shape ◽  
Antimicrobial Activities ◽  
Anticancer Activities ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Human Lung Carcinoma

The ability of microorganisms to reduce inorganic metals has launched an exciting eco-friendly approach towards developing green nanotechnology. Thus, the synthesis of metal nanoparticles through a biological approach is an important aspect of current nanotechnology. In this study, Streptomyces aizuneusis ATCC 14921 gave the small particle of silver nanoparticles (AgNPs) a size of 38.45 nm, with 1.342 optical density. AgNPs produced by Streptomyces aizuneusis were characterized by means of UV-VIS spectroscopy and transmission electron microscopy (TEM). The UV-Vis spectrum of the aqueous solution containing silver ion showed a peak between 410 to 430. Moreover, the majority of nanoparticles were found to be a spherical shape with variables between 11 to 42 nm, as seen under TEM. The purity of extracted AgNPs was investigated by energy dispersive X-ray analysis (EDXA), and the identification of the possible biomolecules responsible for the reduction of Ag+ ions by the cell filtrate was carried out by Fourier Transform Infrared spectrum (FTIR). High antimicrobial activities were observed by AgNPs at a low concentration of 0.01 ppm, however, no deleterious effect of AgNPs was observed on the development and occurrence of Drosophila melanogaster phenotype. The highest reduction in the viability of the human lung carcinoma and normal cells was attained at 0.2 AgNPs ppm.

scholarly journals Antitumor and Antimicrobial Potential of Manganese(II), Nickel(II) and Copper(II) Complexes of 4-Methoxy Benzohydrazide Derived Schiff Base Ligand

2021 ◽  
Vol 11 (1) ◽  
pp. 3249-3260
Keyword(s):  
Schiff Base ◽  
Metal Complexes ◽  
Schiff Base Ligand ◽  
Antimicrobial Activities ◽  
Molar Ratio ◽  
Gram Positive Bacteria ◽  
Ft Ir ◽  
Dose Dependent

Herein, we describe the synthesis and characterization of a Schiff base ligand (E)-N'-(2-hydroxybenzylidene)-4-methoxybenzohydrazide (HBMB) and its Mn(II), Ni(II), and Cu(II) metal complexes (C1-C3) respectively. The ligand HBMB was synthesized by reacting condensation of salicylaldehyde and 4-methoxy benzohydrazide in a 1:1 molar ratio. The structure of HBMB and its metal complexes (C1-C3) were evaluated by using UV-Vis, FT-IR, 1H-NMR, mass spectroscopy as well as on the basis of elemental analysis, conductivity measurements, and thermogravimetric techniques (TGA). The synthesized molecules' tumoricidal properties were performed against human breast cancer (MCF-7) and colon cancer (HT 29) cell lines. The biological results indicated that the ligand, HBMB, and metal complexes possess dose-dependent selective cytotoxicity against the tested carcinoma cells. The synthesized compounds were further evaluated for their in vitro antimicrobial activities against Gram-positive bacteria (Staphylococcus aureus), Gram-negative bacteria (Escherichia coli), and fungal strains (Aspergillus niger).

scholarly journals Synthesis, Characterization and Antimicrobial Activities of Co (III) and Fe (III) Complexes of Imino-N-heterocyclic Carbenes Ligands

2021 ◽  
pp. 59-67
Author(s):  
Samaila Abubakar ◽  
Musa Muktari ◽  
Rejoice Atiko
Keyword(s):  
Escherichia Coli ◽  
Salmonella Typhi ◽  
Antimicrobial Activities ◽  
Heterocyclic Carbenes ◽  
Gram Negative Bacteria ◽  
Disc Diffusion ◽  
Gram Negative ◽  
E Coli ◽  
Gram Positive Bacteria

The synthesis and antimicrobial application of Co (III) and Fe (III) complexes of imine functionalized N-heterocyclic carbene (Imino-NHC) ligands is reported. The ligand precursors 1-(2-[(hydroxyl-benzylidene)-amino]-ethyl)-3-R-3H-imidazol-1-ium bromide where R = pyridyl (1a) and benzyl (1b) have been reported in our previous work. The in-situ generated ligands of 1a and 1b have been successfully coordinated to CoBr2 and [FeI(Cp)(CO)2] leading to the isolation of air-stable N^C^N^O four coordinate Co(III)  complex 2 and a six-coordinate Fe(III) complex 3. The synthesised complexes were both found to be NMR inactive hence were characterize using FTIR and LRMS. The complexes were screened for antimicrobial activities against four gram-negative bacteria Escherichia Coli (E-coli), Shigella, Klebsiella pneumoniae (K. Pneumoniae) and Salmonella typhi (S. typhi) and a gram positive bacteria Staphylocossus aureus (S. aureus). The antimicrobial test was conducted using disc diffusion methods and based on the concentrations of 100, 200, 300, 400 and 500 µg/ mL, significant activities were recorded for both cobalt and the iron complexes.

Sign in / Sign up

Export Citation Format

Share Document