scholarly journals Dynamical Analysis and Simulation Validation of Incompletely Restrained Cable-Suspended Swinging System Driven by Two Cables

2016 ◽  
Vol 2016 ◽  
pp. 1-11
Author(s):  
Naige Wang ◽  
Guohua Cao ◽  
Zhencai Zhu ◽  
Weihong Peng
Keyword(s):  
Equations Of Motion ◽  
Current Method ◽  
Differential Algebraic Equations ◽  
Dynamical Analysis ◽  
Algebraic Equations ◽  
Lagrange Equations ◽  
Simulation Validation ◽  
Geometric Matching ◽  
Adams Simulation ◽  
Suspension Cable

The flexibility of the suspension multicables and driven length difference between two cables cause the translation and rotation of the platform in the incompletely restrained cable-suspended system driven by two cables (IRCSWs2), which are theoretically investigated in this paper. The suspension cables are spatially discretized using the assumed modes method (AMM) and the equations of motion are derived from Lagrange equations of the first kind. Considering all the geometric matching conditions are approximately linear with external actuator, the differential algebraic equations (DAEs) are transformed to a system of ordinary differential equations (ODEs). Using linear boundary conditions of the suspension cable, the current method can obtain not only the accurate longitudinal displacements of cable and posture of the platform, but also the tension between the platform and cables, and the current method is verified by ADAMS simulation.

Coupled vibrations of rope-guided hoisting system with tension difference between two guiding ropes

2016 ◽  
Vol 232 (2) ◽  
pp. 231-244 ◽  
Author(s):  
Guohua Cao ◽  
Jinjie Wang ◽  
Zhencai Zhu
Keyword(s):  
Lateral Displacement ◽  
Current Method ◽  
Differential Algebraic Equations ◽  
Lagrangian Multiplier ◽  
Torsional Vibrations ◽  
Algebraic Equations ◽  
Lagrange Equations ◽  
Matching Conditions ◽  
Geometric Matching ◽  
Hoisting System

The flexibility of the guiding rope and the tension difference between two guiding ropes cause the lateral and torsional vibrations of the hoisting conveyance in the rope-guided hoisting system, respectively, which are theoretically investigated with two different cases in this paper. The assumed modes method is used to discretize the hoisting rope and two guiding ropes, and Lagrange equations of the first kind is adopted to derive the equations of motion, while the geometric matching conditions at the interfaces of the ropes are accounted for by the Lagrangian multiplier. Considering all the geometric matching conditions are approximately linear, the differential algebraic equations are transformed to a system of ordinary differential equations. The current method can obtain not only the accurate lateral displacements of two guiding ropes, but also the constraint forces between the hoisting conveyance and two guiding ropes. Further, the current method is verified by the ADAMS simulation. Finally, the effects of various parameters on the lateral and torsional vibrations of the hoisting conveyance are analyzed and results indicate that the appropriate tension difference and distance difference could decrease the maximum lateral displacement, which is useful to design super deep rope-guided hoisting system for the decrease of the vibration.

Numerical Computation of Differential-Algebraic Equations for Non-Linear Dynamics of Multibody Systems Involving Contact Forces

1999 ◽  
Vol 123 (2) ◽  
pp. 272-281 ◽  
Author(s):  
B. Fox ◽  
L. S. Jennings ◽  
A. Y. Zomaya
Keyword(s):  
Multibody Systems ◽  
Virtual Work ◽  
Equations Of Motion ◽  
Variational Problems ◽  
Differential Algebraic Equations ◽  
Contact Forces ◽  
Algebraic Equations ◽  
Differential Algebraic Equation ◽  
Lagrange Equations ◽  
Constraint Equations

The well known Euler-Lagrange equations of motion for constrained variational problems are derived using the principle of virtual work. These equations are used in the modelling of multibody systems and result in differential-algebraic equations of high index. Here they concern an N-link pendulum, a heavy aircraft towing truck and a heavy off-highway track vehicle. The differential-algebraic equation is cast as an ordinary differential equation through differentiation of the constraint equations. The resulting system is computed using the integration routine LSODAR, the Euler and fourth order Runge-Kutta methods. The difficulty to integrate this system is revealed to be the result of many highly oscillatory forces of large magnitude acting on many bodies simultaneously. Constraint compliance is analyzed for the three different integration methods and the drift of the constraint equations for the three different systems is shown to be influenced by nonlinear contact forces.

Analytical Modelling of the Dynamics of the Four-Bar Mechanism: A Comparison of Some Methods

2018 ◽  
Author(s):  
J. P. Meijaard ◽  
V. van der Wijk
Keyword(s):  
Virtual Work ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Force Balance ◽  
Dynamic Force ◽  
Algebraic Equations ◽  
Principle Of Virtual Work ◽  
Principal Vector ◽  
Reaction Forces ◽  
Principal Points

Some thoughts about different ways of formulating the equations of motion of a four-bar mechanism are communicated. Four analytic methods to derive the equations of motion are compared. In the first method, Lagrange’s equations in the traditional form are used, and in a second method, the principle of virtual work is used, which leads to equivalent equations. In the third method, the loop is opened, principal points and a principal vector linkage are introduced, and the equations are formulated in terms of these principal vectors, which leads, with the introduced reaction forces, to a system of differential-algebraic equations. In the fourth method, equivalent masses are introduced, which leads to a simpler system of principal points and principal vectors. By considering the links as pseudorigid bodies that can have a uniform planar dilatation, a compact form of the equations of motion is obtained. The conditions for dynamic force balance become almost trivial. Also the equations for the resulting reaction moment are considered for all four methods.

scholarly journals Assessment of Linearization Approaches for Multibody Dynamics Formulations

2017 ◽  
Vol 12 (4) ◽  
Author(s):  
Francisco González ◽  
Pierangelo Masarati ◽  
Javier Cuadrado ◽  
Miguel A. Naya
Keyword(s):  
Mechanical System ◽  
Multibody Dynamics ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Practical Applications ◽  
Linearization Methods ◽  
Highly Nonlinear ◽  
Wide Range ◽  
The Way

Formulating the dynamics equations of a mechanical system following a multibody dynamics approach often leads to a set of highly nonlinear differential-algebraic equations (DAEs). While this form of the equations of motion is suitable for a wide range of practical applications, in some cases it is necessary to have access to the linearized system dynamics. This is the case when stability and modal analyses are to be carried out; the definition of plant and system models for certain control algorithms and state estimators also requires a linear expression of the dynamics. A number of methods for the linearization of multibody dynamics can be found in the literature. They differ in both the approach that they follow to handle the equations of motion and the way in which they deliver their results, which in turn are determined by the selection of the generalized coordinates used to describe the mechanical system. This selection is closely related to the way in which the kinematic constraints of the system are treated. Three major approaches can be distinguished and used to categorize most of the linearization methods published so far. In this work, we demonstrate the properties of each approach in the linearization of systems in static equilibrium, illustrating them with the study of two representative examples.

Trajectory Tracking of Underactuated Multibody Systems

2011 ◽  
Author(s):  
Stefan Reichl ◽  
Wolfgang Steiner
Keyword(s):  
Trajectory Tracking ◽  
Multibody Systems ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Feedforward Control ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Differential Algebraic Equations ◽  
State Variables ◽  
Algebraic Equations

This work presents three different approaches in inverse dynamics for the solution of trajectory tracking problems in underactuated multibody systems. Such systems are characterized by less control inputs than degrees of freedom. The first approach uses an extension of the equations of motion by geometric and control constraints. This results in index-five differential-algebraic equations. A projection method is used to reduce the systems index and the resulting equations are solved numerically. The second method is a flatness-based feedforward control design. Input and state variables can be parameterized by the flat outputs and their time derivatives up to a certain order. The third approach uses an optimal control algorithm which is based on the minimization of a cost functional including system outputs and desired trajectory. It has to be distinguished between direct and indirect methods. These specific methods are applied to an underactuated planar crane and a three-dimensional rotary crane.

scholarly journals Numerical solution for consistent initial conditions of constrained mechanical systems

2003 ◽  
Vol 25 (3) ◽  
pp. 170-185
Author(s):  
Dinh Van Phong
Keyword(s):  
Numerical Solution ◽  
Initial Conditions ◽  
Equations Of Motion ◽  
Mechanical Systems ◽  
Differential Algebraic Equations ◽  
System Of Equations ◽  
Algebraic Equations ◽  
Flexible Approach ◽  
Constrained Mechanical Systems ◽  
Consistent Initial Values

The article deals with the problem of consistent initial values of the system of equations of motion which has the form of the system of differential-algebraic equations. Direct treating the equations of mechanical systems with particular properties enables to study the system of DAE in a more flexible approach. Algorithms and examples are shown in order to illustrate the considered technique.

Automating the Derivation of the Equations of Motion of a Multibody Dynamic System With Uncertainty Using Polynomial Chaos Theory and Variational Work

2019 ◽  
Vol 15 (1) ◽  
Author(s):  
Paul S. Ryan ◽  
Sarah C. Baxter ◽  
Philip A. Voglewede
Keyword(s):  
Chaos Theory ◽  
Polynomial Chaos ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Multibody Dynamic ◽  
Mass Spring ◽  
Polynomial Chaos Theory ◽  
Multibody Dynamic System ◽  
Crank Mechanism

Abstract Understanding how variation impacts a multibody dynamic (MBD) system's response is important to ensure the robustness of a system. However, how the variation propagates into the MBD system is complicated because MBD systems are typically governed by a system of large differential algebraic equations. This paper presents a novel process, variational work, along with the polynomial chaos multibody dynamics (PCMBoD) automation process for utilizing polynomial chaos theory (PCT) in the analysis of uncertainties in an MBD system. Variational work allows the complexity of the traditional PCT approach to be reduced. With variational work and the constrained Lagrangian formulation, the equations of motion of an MBD PCT system can be constructed using the PCMBoD automated process. To demonstrate the PCMBoD process, two examples, a mass-spring-damper and a two link slider–crank mechanism, are shown.

Non-smooth dynamical analysis and experimental validation of the cable-suspended parallel manipulator

2012 ◽  
Vol 226 (10) ◽  
pp. 2456-2466 ◽  
Author(s):  
Xing-Guo Shao ◽  
Zhen-Cai Zhu ◽  
Qing-Guo Wang ◽  
Peter CY Chen ◽  
Bin Zi ◽  
...  
Keyword(s):  
Dynamic Analysis ◽  
Parallel Manipulator ◽  
Inequality Constraints ◽  
Parallel Robot ◽  
Differential Algebraic Equations ◽  
Dynamical Analysis ◽  
Algebraic Equations ◽  
Dynamics Model ◽  
Midpoint Method ◽  
Smooth Dynamics

The cable-suspended parallel manipulator replaces the rigid links of traditional parallel robot. The unilateral property of the cable complicates the dynamic analysis of such manipulator and further induces difficulty in control problem. The set-valued tension law is proposed to model the unilateral constraint of the cable, and the dynamics of cable-suspended parallel manipulator is analyzed in the framework of non-smooth dynamics. The resulting non-smooth dynamics model consists of a set of differential–algebraic equations with inequality constraints. Its solution is found by the Moreau midpoint method. An experimental setup was established to verify and validate the effectiveness and accuracy of non-smooth dynamics. And the simulation results generally agree with the experimental results, which demonstrate that the non-smooth dynamics is effective and reasonable for the dynamic analysis of the cable-suspended parallel manipulator. The results of this article deeply reveal the dynamics of the cable-suspended parallel manipulator, and may be used to design more accurate controller for its trajectory control.

Application of Scaling to Multibody Dynamics Simulations

2015 ◽  
Author(s):  
William Prescott
Keyword(s):  
Equations Of Motion ◽  
Industrial Applications ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Step Size ◽  
Virtual Lab ◽  
Long Run ◽  
Multibody Dynamic ◽  
Dynamics Simulations ◽  
Stability Issues

This paper will examine the importance of applying scaling to the equations of motion for multibody dynamic systems when applied to industrial applications. If a Cartesian formulation is used to formulate the equations of motion of a multibody dynamic system the resulting equations are a set of differential algebraic equations (DAEs). The algebraic components of the DAEs arise from appending the joint equations used to model revolute, cylindrical, translational and other joints to the Newton-Euler dynamic equations of motion. Stability issues can arise in an ill-conditioned Jacobian matrix of the integration method this will result in poor convergence of the implicit integrator’s Newton method. The repeated failures of the Newton’s method will require a small step size and therefore simulations that require long run times to complete. Recent advances in rescaling the equations of motion have been proposed to address this problem. This paper will see if these methods or a variant addresses not only stability concerns, but also efficiency. The scaling techniques are applied to the Gear-Gupta-Leimkuhler (GGL) formulation for multibody problems by embedding them into the commercial multibody code (MBS) Virtual. Lab Motion and then use them to solve an industrial sized automotive example to see if performance is improved.

Sign in / Sign up

Export Citation Format

Share Document