scholarly journals Anticorrosion Activity of 8-Quinoline Sulphonyl Chloride on Mild Steel in 1 M HCl Solution

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
R. Ganapathi Sundaram ◽  
M. Sundaravadivelu
Keyword(s):  
Mild Steel ◽  
Surface Coverage ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Protective Film ◽  
X Ray ◽  
Langmuir Adsorption ◽  
Linear Polarization Resistance ◽  
Tafel Polarization ◽  
Hcl Solution

An anticorrosion activity of 8-quinoline sulphonyl chloride (8-QSC) on mild steel in 1 M HCl solution was studied by weight loss (WL) method and electrochemical methods, namely, electrochemical impedance spectroscopy (EIS), Tafel polarization (TP), and linear polarization resistance (LPR). Results obtained from WL method, EIS, TP, and LPR, showed that 8-QSC is a good corrosion inhibitor for mild steel in 1 M HCl solution. The results indicated that the inhibition efficiency and extent of surface coverage were increased with increase in inhibitor concentration and decrease in the corrosion rate. This is due to the formation of protective film on the surface of mild steel. Adsorption of 8-QSC on the mild steel surface was found to obey the Langmuir adsorption isotherm. A Tafel plot indicates that the used inhibitor behaves predominantly as cathodic type. The surface morphology of the mild steel was studied by Scanning Electron Microscopy (SEM) and Energy Dispersive X-Ray (EDX) Spectroscopy techniques. All the methods give the same order of inhibition efficiencies.

scholarly journals Spilanthes acmella Leaves Extract for Corrosion Inhibition in Acid Medium

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 106
Author(s):  
Akbar Ali Samsath Begum ◽  
Raja Mohamed Abdul Vahith ◽  
Vijay Kotra ◽  
Mohammed Rafi Shaik ◽  
Abdelatty Abdelgawad ◽  
...  
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Active Sites ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Film Formation ◽  
Protective Film ◽  
Surface Protection ◽  
Tafel Polarization ◽  
Spilanthes Acmella

In the present study, the corrosion inhibition effect of Spilanthes acmella aqueous leaves extract (SA-LE) on mild steel was investigated in 1.0 M HCl solution at different temperature using weight loss, Tafel polarization, linear polarization resistance (LPR), and electrochemical impedance (EIS) measurements. Adsorption of inhibitor on the surface of the mild steel obeyed both Langmuir and Temkin adsorption isotherms. The thermodynamic and kinetic parameters were also calculated to determine the mechanism of corrosion inhibition. The inhibition efficiency was found to increase with an increase in the inhibitor concentration i.e., Spilanthes acmella aqueous leaves extract, however, the inhibition efficiency decreased with an increase in the temperature. The phytochemical constituents with functional groups including electronegative hetero atoms such as N, O, and S in the extract adsorbed on the metal surface are found responsible for the effective performance of the inhibitor, which was confirmed by Fourier-transform infrared spectroscopy (FT-IR) and ultraviolet–visible spectroscopic (UV-Vis) studies. Protective film formation against corrosion was confirmed by scanning electron microscopy (SEM), atomic force microscopy (AFM), and contact angle studies. The result shows that the leaves extract acts as corrosion inhibitor and is able to promote surface protection by blocking active sites on the metal.

scholarly journals Imidazolium-Based Ionic Liquid as Efficient Corrosion Inhibitor for AA 6061 Alloy in HCl Solution

Materials ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 4672
Author(s):  
Xiaohong Wang ◽  
Ailing Huang ◽  
Dongquan Lin ◽  
Mohd Talha ◽  
Hao Liu ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Photoelectron Spectroscopy ◽  
Immersion Time ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Surface Damage ◽  
Surface Films ◽  
Protective Film ◽  
X Ray ◽  
Hcl Solution

The corrosion inhibition performance of an imidazolium-based ionic liquid (IL), 1-butyl-3-methylimidazolium thiocyanate (BMIm), was studied on AA 6061 alloy in 1 M HCl solution at 303 K, 333 K, and 363 K by gravimetric tests, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) analysis. Scanning electron microscopy with energy dispersive X-ray (SEM-EDX) and X-ray photoelectron spectroscopy (XPS) were used to detect the surface morphologies and chemical composition of the surface films. The results indicate that this IL inhibits AA 6061 corrosion in acid with maximum inhibition efficiencies of 98.2%, 86.6%, and 41.2% obtained at 303 K, 333 K, and 363 K respectively. Inhibition efficiency generally decreased with increasing immersion time; the major exception was at 303 K, whereby the inhibition efficiency was detected to increase with immersion time from 30 to 90 min and then decrease slightly beyond 90 min. The results indicate that BMIm is a mixed-type inhibitor with a predominant effect on cathodic reactions. Surface morphology analyses by SEM revealed less surface damage in the presence of the inhibitor. XPS analysis established the development of a protective film on the AA 6061 surface which was hydrophobic in nature.

scholarly journals Newly Synthesized N-Substituted Thiosemicarbazone as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl

2019 ◽  
Vol 7 (4.14) ◽  
pp. 168
Author(s):  
N Z. Nor Hashim ◽  
K Kassim ◽  
F H. Zaidon
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption ◽  
Before And After ◽  
Ft Ir ◽  
L1 And L2

Two N-substituted thiosemicarbazone derivatives namely as 2-(4-chlorobenzylidene)-N-phenylhydrazinecarbothioamide and 2-benzylidene-N-phenylhydrazinecarbothioamide (L1 and L2, respectively) have been tested as corrosion inhibitors on mild steel in 1 M HCl. The ligands were synthesized and investigated using potentiodynamic polarization (PD) and electrochemical impedance spectroscopy (EIS).  The obtained results indicated that inhibition efficiency, (IE, %) L1 increased with increasing inhibitor concentrations which behaved as a good corrosion inhibitor compared to L2. The synthesized ligands were successfully characterized by melting point, elemental analysis (C, H, N, and S), Fourier-transform infrared spectroscopy (FT-IR) and NMR (1H and 13C) spectroscopy. The excellent inhibition effectiveness for both compounds on mild steel before and after immersion in 1 M HCl solution containing 40 ppm of L1 and L2 were also verified by scanning electron microscope (SEM). Based on potentiodynamic polarization results, it can be concluded that all investigated compounds are mixed-type inhibitors and obey the Langmuir adsorption isotherm. 

scholarly journals Inhibition Effect of Miconazole Nitrate on the Corrosion of Mild Steel in Hydrochloric Acid Medium

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
J. Ishwara Bhat ◽  
Vijaya D. P. Alva
Keyword(s):  
Hydrochloric Acid ◽  
Mild Steel ◽  
Acid Medium ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Inhibitor Molecule ◽  
Langmuir Adsorption ◽  
Hydrochloric Acid Medium ◽  
Miconazole Nitrate ◽  
Impedance Spectroscopy Technique

The corrosion inhibition of mild steel by miconazole nitrate, an antifungal drug has been investigated using potentiodynamic polarization, electrochemical impedance spectroscopy technique, and weight loss methods. The experimental results suggested miconazole nitrate is a good corrosion inhibitor for mild steel in 1 M hydrochloric acid medium. The inhibition efficiency increased with increase in inhibitor concentration. The thermodynamic parameters were determined and discussed. The inhibition was assumed to occur via adsorption of the inhibitor molecule on the surface of mild steel following Langmuir adsorption isotherm.

scholarly journals Mitigation of Mild Steel Corrosion in Acidic Solution Using Inhibitor

2011 ◽  
Vol 8 (s1) ◽  
pp. S53-S60 ◽  
Author(s):  
M. Vishnudevan
Keyword(s):  
Mild Steel ◽  
Sodium Benzoate ◽  
Inhibition Efficiency ◽  
Acidic Solution ◽  
Electrochemical Impedance ◽  
Steel Corrosion ◽  
Trisodium Citrate ◽  
Tafel Polarization ◽  
Mild Steel Corrosion ◽  
Maximum Inhibition

The inhibition efficiency of mild steel corrosion in HCl acidic solution containing various concentrations of mixed inhibitors were evaluated by conducting Tafel polarization and electrochemical impedance studies. The mixed inhibitors used in this present investigation were trisodium citrate and sodium benzoate. In this present investigation 0.01 N to 0.1 N concentrations of HCl was used at 30°C. Sodium benzoate present in the mixed inhibitive system enhanced the inhibition efficiency through chemisorptions. The maximum inhibition efficiency ( 95.4%) was obtained for the mixed inhibitive system containing 0.05 M citrate and 0.5 M benzoate in 0.1 N HCl.

Nickel Corrosion Inhibition in Sulfuric Acid—Electrochemical Studies, Morphologies, and Theoretical Approach

CORROSION ◽  
10.5006/0508 ◽  
2012 ◽  
Vol 68 (8) ◽  
pp. 699-712 ◽  
Author(s):  
M.A. Amin ◽  
H. Shokry ◽  
E.M. Mabrouk
Keyword(s):  
Sulfuric Acid ◽  
Electrochemical Impedance ◽  
Theoretical Studies ◽  
Electrochemical Studies ◽  
X Ray ◽  
Linear Polarization Resistance ◽  
Tafel Polarization ◽  
Inhibition Performance ◽  
Experimental Findings ◽  
Good Agreement

The inhibition performance of three selected dihydrazide derivatives, namely, malonic acid (MAD), succinic acid (SAD), and adipic acid (AAD) dihydrazide, was tested in relation to nickel corrosion in 1.0 M sulfuric acid (H2SO4) solution. Electrochemical methods (Tafel polarization, linear polarization resistance [LPR], and electrochemical impedance spectroscopy [EIS]) were used, complemented with scanning electron microscopy/energy-dispersive x-ray (SEM/EDX) examinations. Computational studies were also used to confirm experimental findings and to optimize the adsorption structures of dihydrazide derivatives. Results showed that the three tested dihydrazides inhibited Ni corrosion (mixed-type inhibitors) to an extent, depending on the type and concentration of the introduced inhibitor. SEM studies revealed that the corroded areas on the surface were decreased in the presence of additives to an extent, depending on the type and concentration of the tested inhibitor. Results obtained from electrochemical measurements are in good agreement with theoretical studies.

scholarly journals Anti-corrosive effect of Cassia alata leaves extract on Mild steel in 1.0N Hydrochloric acid

2006 ◽  
Vol 2 (2) ◽  
pp. 82-90
Author(s):  
Petchiammal A.p ◽  
P.Deepa Rani ◽  
S.Seetha Laks ◽  
S. Selvaraj
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Spectroscopic Studies ◽  
Protective Film ◽  
Cassia Alata ◽  
Langmuir Adsorption ◽  
Corrosive Effect ◽  
Ft Ir ◽  
Corrosion Inhibition Efficiency

The inhibition effect of Cassia alata leaves extract on corrosion of mild steel in 1N HCl was investigated through mass loss measurements with various time and temperature. The observed result indicated that the corrosion inhibition efficiency and degree of surface coverage were increased with increase of inhibitor concentration and temperature. The thermodynamic parameters (Ea, ∆Hads, ∆Gads, ∆Sads) were evaluated for corrosion inhibition process which suggests that the adsorption is endothermic, spontaneous and chemisorptions and also the inhibitor follows Langmuir adsorption isotherm. The protective film formed on metal surface was analyzed using spectroscopic studies viz, UV, FT-IR and EDX techniques.

scholarly journals Corrosion Inhibition of Mild Steel in Acid Solution by 3,4,5-Trimethoxyphenyl-2-imidazolines

2011 ◽  
Vol 8 (2) ◽  
pp. 671-679 ◽  
Author(s):  
D. Nalini ◽  
R. Rajalakshmi ◽  
S. Subhashini
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Mixed Mode ◽  
Anodic Polarization ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption Isotherm ◽  
Sem Images ◽  
Acid Media ◽  
Langmuir Adsorption

A heterocyclic imidazoline, 3,4,5-trimethoxyphenyl-2-imidazolines (TMP2I) was tested for its corrosion inhibition in 0.5 M H2SO4and 1 M HCl using weight loss, Tafel polarisation and electrochemical impedance techniques. The results show that the inhibition efficiency increases with the increase in concentration of TMP2I and the higher efficiency of about 98% is obtained in both the acid media at 20 ppm. The adsorption of TMP2I obeys Langmuir adsorption isotherm and occurs spontaneously. Cathodic and anodic polarization curves of mild steel in the presence of different concentrations of TMP2I at 300C reveal that it is a mixed type of inhibitor. Electrochemical impedance studies reveal that the system follows mixed mode of inhibition. The surface morphology of the mild steel specimens was evaluated using SEM images

Corrosion inhibitory effect of mixed cocoa pod-Ficus exasperata extract on MS in 1.5 M HCl: optimization and electrochemical study

2021 ◽  
Vol 39 (2) ◽  
pp. 109-122
Author(s):  
Lekan Taofeek Popoola
Keyword(s):  
Electrochemical Impedance Spectroscopy ◽  
Impedance Spectroscopy ◽  
Mild Steel ◽  
Central Composite Design ◽  
Potentiodynamic Polarization ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Central Composite ◽  
Hcl Solution

Abstract This paper investigated optimization of corrosion inhibitory attributes of mixed cocoa pod-Ficus exasperata (CP-FE) extracts towards mild steel in 1.5 M HCl using central composite design. Potentiodynamic polarization, linear polarization resistance and electrochemical impedance spectroscopy measurements were used for the electrochemical study. The result revealed maximum inhibition efficiency of 91.52% at temperature, inhibitor concentration, time and acid concentration of 50 °C, 5 g/L, 144 h and 0.2 M, respectively with R 2 value of 0.9429. Central composite design predicted optimum point of 70.37 °C, 3.81 g/L, 127.37 h and 0.22 M. Potentiodynamic polarization revealed extract to be mixed-type inhibitor with anodic prevalence. Electrochemical impedance spectroscopy showed that corrosion inhibition occurred via adsorption of CP-FE molecules on active sites of MS surface. Scanning electron microscopy images revealed protection of mild steel surface by adsorbed molecules of CP-FE extracts. Fourier transform infrared revealed presence of carboxyl (–COOH), unsaturated (–C-C–) and hydroxyl (–OH). Energy dispersive spectroscopy revealed presence of high iron composition on mild steel surface in the presence of mixed CP-FE extract proving its corrosion inhibition efficiency in 1.5 M HCl. Atomic adsorption spectroscopy revealed loss of Fe2+ into free HCl solution. Generally, extract from mixed CP-FE was found as effective corrosion inhibitor for mild steel in 1.5 M HCl solution.

scholarly journals COVID-19 Vaccine, Contraceptive, Viscosity and Safety Margin Change

2021 ◽  
Vol 11 (2) ◽  
pp. 3509-3512
Keyword(s):  
Adsorption Isotherm ◽  
Mild Steel ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Safety Margin ◽  
Steel Corrosion ◽  
Langmuir Adsorption Isotherm ◽  
Langmuir Adsorption ◽  
Mild Steel Corrosion ◽  
Hcl Solution

The temperature effect of 4-ethyl-1-(4-oxo-4-phenylbutanoyl)thiosemicarbazide (EOPT) on the mild steel corrosion in 1 M HCl solution was studied by gravimetric techniques at temperatures varying from 303 to 333 K. The investigated inhibitor concentrations were started from 100 ppm and ended with 500 ppm. The inhibition efficiency increased with the increase of the concentration of the inhibitor and reached 96.1% with the concentration of 500 ppm at 303 K and decreased to 66.3% at 333 K. Moreover, the inhibition efficiencies decreased with the temperature increase for both acids. Using the Langmuir adsorption isotherm for the adsorption of this inhibitor on the mild steel surface was determined. EOPT was found to be an efficient corrosion inhibitor due to its structural molecules, which contain sulfur, nitrogen, and oxygen, hetero atoms an addition to the aromatic ring.

Sign in / Sign up

Export Citation Format

Share Document