scholarly journals Changes in Characteristics of Kithul (Caryota urens) Flour Prepared by Different Modification Techniques

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
J. A. A. C. Wijesinghe ◽  
I. Wickramasinghe ◽  
K. H. Saranandha
Keyword(s):  
X Ray Diffraction ◽  
Acid Modification ◽  
X Ray ◽  
Swelling Power ◽  
Chemical Treatments ◽  
Food Applications ◽  
Flour Sample ◽  
Xrd Patterns ◽  
Physical And Chemical ◽  
Low Solubility

Flour has been an ample source of research and most abundant material for a number of food applications. The aim of this study is to introduce modified Kithul flour for certain industrial requirements. Several physical and chemical treatments were employed to modify Kithul (Caryota urens) flour. The effects of pregelatinization (PG-I and II), acid modification (AC), and dextrinization (DX) on their swelling power, solubility, granular morphology, viscosity, and X-ray diffraction (XRD) patterns were studied. At 75°C, pregelatinized treated (PG-II) flour had a high solubility (5.31), while at 70°C pregelatinized treated (PG-I) flour had a low solubility (4.47) as compared to the solubility of native flour sample (RW = 4.88). Same pattern has been followed by the swelling power while viscosity showed the highest value for PG-II (7296.51 Cp) and lowest value for DX treatment (873.40 Cp) as peak viscosities. There were no significant changes in granular size of all treatments compared with the native Kithul flour (45.52 μm). X-ray diffraction (XRD) also followed the same pattern by presenting Bragg’s angle (2θ) positions near 15 (Peak 1), 17 (Peak 2), 18 (Peak 3), and 23 (Peak 4) providing evidence for the presence of crystallites which belong to type A in all modified and native Kithul flour treatments.

Characterization of Coal Fly Ash for Use in Synthesis of Zeolites

2018 ◽  
Vol 930 ◽  
pp. 578-583
Author(s):  
Augusto César Cavalcanti Gomes ◽  
Andrea de Vasconcelos Ferraz ◽  
Lucimar Pacheco Gomes da Rocha
Keyword(s):  
Fly Ash ◽  
Coal Fly Ash ◽  
Coal Ash ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inorganic Oxides ◽  
Chemical Treatments ◽  
Xrf Scanning ◽  
The Matrix ◽  
Physical And Chemical

Due to the large quantity of fly ash produced during the combustion of coal, it has become necessary to give greater applicability to this residue of low commercial value. The residue contains inorganic oxides which can act on the crystalline structure of zeolites, namely silicon and aluminum oxide. The coal ash was submitted to physical and chemical treatments with the aim of potentiating the silicon and aluminum extraction from the residue. The pure ash and the treated ashes were characterized by: X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transformation infrared spectroscopy (FTIR). By means of the carried out characterizations it was observed that the treatments were effective for the extraction of aluminosilicates from the matrix. The treatments did not affect the morphology, the crystalline phases and neither the chemical composition of the ashes. Seeing this, the coal ash and its treatments showed to be a precursor for the synthesis of zeolites.

scholarly journals Influence of Li2CO3 addition on electrical and magnetic properties of Ni0.6Mg0.4Fe2O4

2020 ◽  
Vol 10 (03) ◽  
pp. 2050003
Author(s):  
M. R. Hassan ◽  
M. T. Islam ◽  
M. N. I. Khan
Keyword(s):  
Magnetic Properties ◽  
Single Phase ◽  
Low Frequency ◽  
Solid State Reaction Method ◽  
Charge Carriers ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrical And Magnetic Properties ◽  
Frequency Regime ◽  
Xrd Patterns

In this research, influence of adding Li2CO3 (at 0%, 2%, 4%, 6%) on electrical and magnetic properties of [Formula: see text][Formula: see text]Fe2O4 (with 60% Ni and 40% Mg) ferrite has been studied. The samples are prepared by solid state reaction method and sintered at 1300∘C for 6[Formula: see text]h. X-ray diffraction (XRD) patterns show the samples belong to single-phase cubic structure without any impurity phase. The magnetic properties (saturation magnetization and coercivity) of the samples have been investigated by VSM and found that the higher concentration of Li2CO3 reduces the hysteresis loss. DC resistivity increases with Li2CO3 contents whereas it decreases initially and then becomes constant at lower value with temperature which indicates that the studied samples are semiconductor. The dielectric dispersion occurs at a low-frequency regime and the loss peaks are formed in a higher frequency regime, which are due to the presence of resonance between applied frequency and hopping frequency of charge carriers. Notably, the loss peaks are shifted to the lower frequency with Li2CO3 additions.

Monitoring of Fluctuations in the Physical and Chemical Properties of a High-Calcium Fly Ash

1987 ◽  
Vol 113 ◽  
Author(s):  
Scott Schlorholtz ◽  
Ken Bergeson ◽  
Turgut Demirel
Keyword(s):  
Fly Ash ◽  
Chemical Properties ◽  
Operating Conditions ◽  
Physical And Chemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
High Calcium ◽  
Physical And Chemical ◽  
And Chemical Properties

ABSTRACTThe physical and chemical properties of fly ash produced at Ottumwa Generating Station have been monitored since April, 1985. The fly ash is produced from burning a low sulfur, sub-bituminous coal obtained from the Powder River Basin near Gillette, Wyoming. One-hundred and sixty samples of fly ash were obtained during the two year period. All of the samples were subjected to physical testing as specified by ASTM C 311. About one-hundred of the samples were also subjected to a series of tests designed to monitor the self-cementing properties of the fly ash. Many of the fly ash samples were subjected to x-ray diffraction and fluorescence analysis to define the mineralogical and chemical composition of the bulk fly ash as a function of sampling date. Hydration products in selected hardened fly ash pastes, were studied by x-ray diffraction and scanning electron microscopy. The studies indicated that power plant operating conditions influenced the compressive strength of the fly ash paste specimens. Mineralogical and morphological studies of the fly ash pastes indicated that stratlingite formation occurred in the highstrength specimens, while ettringite was the major hydration product evident in the low-strength specimens.

Fabrication of 239/238Pu-Zirconolite Ceramic Pellets by Natural Sintering

2003 ◽  
Vol 807 ◽  
Author(s):  
T. Advocat ◽  
F. Jorion ◽  
T. Marcillat ◽  
G. Leturcq ◽  
X. Deschanels ◽  
...  
Keyword(s):  
Grain Size ◽  
Radioactive Waste ◽  
Nuclear Waste ◽  
Chemical Stability ◽  
Minor Actinides ◽  
Loading Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Physical And Chemical ◽  
Inorganic Matrix

ABSTRACTZirconolite is a potential inorganic matrix that is currently investigated in France, in the framework of the 1991 radioactive waste management law, with a view to provide durable containment of the trivalent and tetravalent minor actinides like neptunium, curium, americium and small quantities of unrecyclable plutonium separated from other nuclear waste. To confirm the actinide loading capacity of the zirconolite calcium site and to study the physical and chemical stability of this type of ceramic when subjected to alpha self-irradiation, zirconolite ceramic pellets were fabricated with 10 wt% plutonium oxide (isotope 239 or 238). The 55 pellets are dense (> 93.3% of the theoretical density on average) and free of cracks. They are characterized by a grain size of between 10 and 20 micrometers. X-ray diffraction analyses confirmed the presence of the zirconolite 2M crystalline structure.

Determination of crystallinity of Chinese handmade papers by means of X-ray diffraction

2020 ◽  
Vol 41 (2) ◽  
pp. 69-86
Author(s):  
Peng Liu ◽  
Hongbin Zhang ◽  
Sinong Wang ◽  
Hui Yu ◽  
Bingjie Lu ◽  
...  
Keyword(s):  
Negative Influence ◽  
X Ray Diffraction ◽  
Cross Sectional ◽  
X Ray ◽  
Eulaliopsis Binata ◽  
Different Types ◽  
Powder Samples ◽  
Xrd Patterns ◽  
Xrd Method

AbstractThe crystallinity indices (CrI) of Chinese handmade papers were investigated using the X-ray diffraction (XRD) method. Four Chinese handmade papers, Yingchun, Zhuma, Yuanshu and Longxucao papers were used as model substrates of mulberry bark, ramie, bamboo and Eulaliopsis binata papers, respectively. Two forms of the paper samples, paper sheets and their comminuted powders, were used in this study. The results showed that their XRD patterns belong to the cellulose-I type and Iβ dominates the cellulose microstructure of these paper samples. Moreover, it was found that the microstructures and CrIs of cellulose of these papers were changed by the grinding treatment. This work suggested that the sheet form of the handmade papers is suitable to determine CrI by XRD, despite the contribution of non-cellulosic components in the papers. The order of CrIs for these paper sheet samples was Yingchun, Zhuma, Longxucao and Yuanshu papers. Besides CrIs, differences in cross-sectional areas of the crystalline zone of cellulose can be used for comparing different types of handmade papers. It was also found that the CrIs and crystallite size of paper cellulose varied between the sheet samples and the powder samples, illustrating that the pulverisation has a negative influence on the microstructure of the handmade papers.

Effects of Different Sintering Temperature on the Microstructure and Piezoelectric Properties of Pb(Nb2/3Zn1/3)x(Zr52Ti48)1-XO3 Ceramics

2014 ◽  
Vol 1061-1062 ◽  
pp. 83-86
Author(s):  
Hong Wu ◽  
De Yi Zheng
Keyword(s):  
Electrical Properties ◽  
Electromechanical Coupling ◽  
Piezoelectric Properties ◽  
Sintering Temperature ◽  
Electromechanical Coupling Coefficient ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ceramic Samples ◽  
Xrd Patterns ◽  
The Relationship

In this paper, the effects of different sintering temperature on the microstructure and piezoelectric properties of Pb(Nb2/3Zn1/3)0.03(Zr52Ti48)0.97O3(PNZZT) ceramic samples were investigated. The Pb(Nb2/3Zn1/3)0.03(Zr52Ti48)0.97O3 ceramics materials was prepared by a conventional mixed oxide method. In the period of the experiment, the relationship between crystallographic phase and microstructure were analyzed by X-ray diffraction(XRD) and scanning electron microscopy(SEM) respectively. The XRD patterns shows that all of the ceramic samples are with a tetragonal perovskite structure. Along with sintering temperature increased and the x is 0.03, the grain size gradually become big. Through this experiment, it has been found that when the x is 0.03 and sintered at 1130°C for 2 h, the grains grow well, the grain-boundary intersection of the sample combined well and the porosity of the ceramics decreased, an excellent comprehensive electrical properties of the Pb(Nb2/3Zn1/3)0.03(Zr52Ti48)0.97O3 samples can be obtained. Its best electrical properties are as follows: dielectric constant (ε) is 1105, dielectric loss(tg) is 0.017, electromechanical coupling coefficient (Kp) is 0.287, piezoelectric constant(d33) is 150PC/N

Effect of Fly Ash and Slag on the Resistance to H2S Attack of Oil Well Cement

2009 ◽  
Vol 79-82 ◽  
pp. 71-74
Author(s):  
Qi Wang ◽  
Lin Qiao ◽  
Peng Song
Keyword(s):  
Fly Ash ◽  
Compression Strength ◽  
Blended Cement ◽  
Oil Well ◽  
X Ray Diffraction ◽  
X Ray ◽  
Curing Period ◽  
Oil Well Cement ◽  
Xrd Patterns ◽  
Well Cement

In this paper, the resistance to H2S attack of pastes made from slag-fly ash blended cement used in oil well (SFAOW) was studied, in which fly ash (FA) was used at replacement dosages of 30% to 60% by weight of slag. Samples of SCOW and SFAOW pastes were demoulded and cured by immersion in fresh water with 2 Mp H2S insulfflation under 130oC for 15 days. After this curing period, compression strength and permeability of the samples were investigated. The reaction mechanisms of H2S with the paste were carried out through a microstructure study, which included the use of x-ray diffraction (XRD) patterns and scanning electron microscope (SEM). Based on the obtained data in this study, incorporation of FA into SCOW results in the comparable effects in the resistance to H2S attack. When the replacement dosage of slag is about 40%, the paste exhibits the best performance on resistance to H2S attack with compression strength 36.58Mp.

STRUCTURE AND MAGNETIC PROPERTIES OF MECHANICAL ALLOYED Mn-15at.%Al

2013 ◽  
Vol 12 (01) ◽  
pp. 1350006
Author(s):  
AHMED E. HANNORA ◽  
FARIED F. HANNA ◽  
LOTFY K. MAREI
Keyword(s):  
Thermal Analysis ◽  
Room Temperature ◽  
Average Crystallite Size ◽  
Al Alloy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Milled Sample ◽  
Powder Samples ◽  
Xrd Patterns ◽  
Method Analysis

Mechanical alloying (MA) method has been used to produce nanocrystallite Mn -15at.% Al alloy. X-ray diffraction (XRD) patterns for the as-milled elemental α- Mn and aluminum powder samples show a mixture of α + β- MnAl phases after 20 h of milling and changes to a dominant β- MnAl phase structure after 50 h. An average crystallite size of 40 nm was determined from Hall–Williamson method analysis after 5 h of milling. Moreover, the thermal analysis results using differential thermal analysis (DTA), suggested a possible phase transformation after 20 h of milling. Isothermal treatments are carried in the temperature range of 450°C to 1000°C. Room-temperature vibrating sample magnetometer (VSM) measurements of the hysteretic response revealed that the saturation magnetization Bs and coercivity Hc for 10 h ball milled sample are ~ 2.1 emu/g and ~ 92 Oe, respectively.

Effects of Indium Incorporation on the Optical Properties of ZnO Films

2006 ◽  
Vol 11-12 ◽  
pp. 159-162 ◽  
Author(s):  
Yong Ge Cao ◽  
Lei Miao ◽  
Sakae Tanemura ◽  
Yasuhiko Hayashi ◽  
Masaki Tanemura
Keyword(s):  
Optical Transmission ◽  
Full Width Half Maximum ◽  
Structural Disorder ◽  
Band Gaps ◽  
Zno Films ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Optical Band Gaps ◽  
Xrd Patterns

Transparent indium-doped ZnO (IZO) films with low In content (<6at%) were fabricated through radio-frequency (rf) helicon magnetron sputtering. Formation of In-Zn-O solid solution was confirmed by X-ray diffraction (XRD) patterns. Incorporation of indium into ZnO films enhances the optical transmission in the visible wavelength. The optical band-gaps slightly increase from 3.25eV (ZnO) to 3.28eV (In0.04Zn0.96O) and to 3.30eV (In0.06Zn0.94O) due to Burstain-Moss effect. The Urbach tail parameter E0, which is believed to be a function of structural disorder, increases from 79meV (ZnO), to 146meV (In0.04Zn0.96O), and to 173meV (In0.06Zn0.94O), which is consistent with increase of Full-Width Half-Maximum (FWHM) in corresponding XRD patterns. Decreasing in crystal quality with increasing indium concentration is also confirmed by photoluminescence spectra.

scholarly journals Lanthanoid Complexes Supported by Retro-Claisen Condensation Products of β-Triketonates

2018 ◽  
Author(s):  
Laura Abad Galán ◽  
Alexandre N. Sobolev ◽  
Eli Zysman-Colman ◽  
Mark Ogden ◽  
Massimiliano Massi
Keyword(s):  
Chelating Ligands ◽  
X Ray Diffraction ◽  
Reaction Conditions ◽  
Claisen Condensation ◽  
X Ray ◽  
Condensation Products ◽  
Complexation Reactions ◽  
The Impact ◽  
Low Solubility

<i>β</i>-Triketonates have been recently used as chelating ligands for lanthanoid ions, presenting unique structures varying from polynuclear assemblies to polymers. In an effort to overcome low solubility of the complexes of tribenzoylmethane, four <i>β</i>-triketones with higher lipophilicity were synthesised. Complexation reactions were performed for each of these molecules using different alkaline bases in alcoholic media. X-ray diffraction studies suggested that the ligands were undergoing decomposition under the reaction conditions. This is proposed to be caused by <i>in situ</i>retro-Claisen condensation reactions, consistent with two examples that have been reported previously. The lability of the lanthanoid cations in the presence of a varying set of potential ligands gave rise to structures where one, two, or three of the molecules involved in the retro-Claisen condensationreaction were linked to the lanthanoid centres. These results, along with measurements of ligand decomposition in the presence of base alone, suggest that using solvents of lower polarity will mimimise the impact of the retro-Claisen condensation in these complexes. <br>

Sign in / Sign up

Export Citation Format

Share Document