scholarly journals Effect of the Reinforce Process on the Fatigue Fracture Properties of Aeronautical Polymethyl Methacrylate

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Wei Shang ◽  
Xiao-jing Yang ◽  
Xin-hua Ji ◽  
Zhong-xian Liu
Keyword(s):  
Mechanical Properties ◽  
Polymethyl Methacrylate ◽  
Fatigue Fracture ◽  
Fatigue Cracks ◽  
Experimental Results ◽  
Phase Shifting ◽  
Fracture Properties ◽  
Phase Shifting Technique ◽  
Digital Photoelasticity

The main purpose of the present work is to investigate fatigue fracture mechanical properties of aeronautical directional polymethyl methacrylate (PMMA) which has been treated by the directional tensile technology. Firstly, the fatigue cracks growth has been tracked in directional PMMA using the stroboscopic method. Then, the digital photoelasticity with a phase-shifting technique was used to measure the uniformity of the interlaminar stretching. Based on obtained experimental results, the effect of the directional stretching on fatigue fracture properties of PMMA was analyzed. Finally, fatigue fracture properties of laminated directional PMMA were discussed and compared with those of monolayer directional PMMA. Results of this work show that the lamination technology can strengthen the interlayer of directional PMMA and enhance its fatigue fracture properties.

Computational hybrid phase shifting technique applied to digital photoelasticity

Optik ◽  
2018 ◽  
Vol 157 ◽  
pp. 287-297 ◽  
Author(s):  
Juan Carlos Briñez ◽  
Alejandro Restrepo Martínez ◽  
John W. Branch
Keyword(s):  
Phase Shifting ◽  
Phase Shifting Technique ◽  
Digital Photoelasticity

Guided Wave Acoustic Emission from Fatigue Crack Growth in Aluminium Plate

2006 ◽  
Vol 13-14 ◽  
pp. 23-28 ◽  
Author(s):  
C.K. Lee ◽  
Jonathan J. Scholey ◽  
Paul D. Wilcox ◽  
M.R. Wisnom ◽  
Michael I. Friswell ◽  
...  
Keyword(s):  
Acoustic Emission ◽  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Elastic Waves ◽  
Fatigue Cracks ◽  
Guided Wave ◽  
Experimental Results ◽  
Multiple Reflections ◽  
Alloy Plate

Acoustic emission (AE) testing is an increasingly popular technique used for nondestructive evaluation (NDE). It has been used to detect and locate defects such as fatigue cracks in real structures. The monitoring of fatigue cracks in plate-like structures is critical for aerospace industries. Much research has been conducted to characterize and provide quantitative understanding of the source of emission on small specimens. It is difficult to extend these results to real structures as most of the experiments are restricted by the geometric effects from the specimens. The aim of this work is to provide a characterization of elastic waves emanating from fatigue cracks in plate-like structures. Fatigue crack growth is initiated in large 6082 T6 aluminium alloy plate specimens subjected to fatigue loading in the laboratory. A large specimen is utilized to eliminate multiple reflections from edges. The signals were recorded using both resonant and nonresonant transducers attached to the surface of the alloy specimens. The distances between the damage feature and sensors are located far enough apart in order to obtain good separation of guided-wave modes. Large numbers of AE signals are detected with active fatigue crack propagation during the experiment. Analysis of experimental results from multiple crack growth events are used to characterize the elastic waves. Experimental results are compared with finite element predictions to examine the mechanism of AE generation at the crack tip.

Optically Transparent Polymethyl Methacrylate Composites made with Glass Fibers of Varying Refractive Index

1997 ◽  
Vol 12 (4) ◽  
pp. 1091-1101 ◽  
Author(s):  
Seunggu Kang ◽  
Hongy Lin ◽  
Delbert E. Day ◽  
James O. Stoffer
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Refractive Index ◽  
Mechanical Strength ◽  
Glass Fiber ◽  
Polymethyl Methacrylate ◽  
Optical Transmission ◽  
Annealing Temperature ◽  
Glass Fibers ◽  
Optically Transparent

The dependence of the optical and mechanical properties of optically transparent polymethyl methacrylate (PMMA) composites on the annealing temperature of BK10 glass fibers was investigated. Annealing was used to modify the refractive index (R.I.) of the glass fiber so that it would more closely match that of PMMA. Annealing increased the refractive index of the fibers and narrowed the distribution of refractive index of the fibers, but lowered their mechanical strength so the mechanical properties of composites reinforced with annealed fibers were not as good as for composites containing as-pulled (chilled) glass fibers. The refractive index of as-pulled 17.1 μm diameter fibers (R.I. = 1.4907) increased to 1.4918 and 1.4948 after annealing at 350 °C to 500 °C for 1 h or 0.5 h, respectively. The refractive index of glass fibers annealed at 400 °C/1 h best matched that of PMMA at 589.3 nm and 25 °C, so the composite reinforced with those fibers had the highest optical transmission. Because annealed glass fibers had a more uniform refractive index than unannealed fibers, the composites made with annealed fibers had a higher optical transmission. The mechanical strength of annealed fiber/PMMA composites decreased as the fiber annealing temperature increased. A composite containing fibers annealed at 450 °C/1 h had a tensile strength 26% lower than that of a composite made with as-pulled fibers, but 73% higher than that for unreinforced PMMA. This decrease was avoided by treating annealed fibers with HF. Composites made with annealed and HF (10 vol. %)-treated (for 30 s) glass fibers had a tensile strength (∼200 MPa) equivalent to that of the composites made with as-pulled fibers. However, as the treatment time in HF increased, the tensile strength of the composites decreased because of a significant reduction in diameter of the glass fiber which reduced the volume percent fiber in the composite.

Analysis and Test on Mechanical Properties of a Flexible Suspension Bridge

2013 ◽  
Vol 405-408 ◽  
pp. 1616-1622
Author(s):  
Guo Hui Cao ◽  
Jia Xing Hu ◽  
Kai Zhang ◽  
Min He
Keyword(s):  
Mechanical Properties ◽  
Suspension Bridge ◽  
Experimental Results ◽  
Suspension Bridges ◽  
Loading Test ◽  
Main Cable ◽  
Element Simulation ◽  
Static Loading Test ◽  
Geometric Nonlinear Analysis ◽  
Test Process

In order to research on mechanical properties of flexible suspension bridges, a geometric nonlinear analysis method was used to simulate on the experimental results, and carried on static loading test finally. In the loading test process, the deformations were measured in critical section of the suspension bridge, and displacement values of measured are compared with simulation values of the finite element simulation. Meanwhile the deformations of the main cable sag are observed under classification loading, the results show that the main cable sag increment is basically linear relationship with the increment of mid-span loading and tension from 3L/8 and 5L/8 to L/2 section, the main cable that increasing unit sag required mid-span loads and tension are gradually reduce in near L/4 and 3L/4 sections and gradually increase in near L/8 and 7L/8 sections and almost equal in near L/2, 3L/8 and 5L/8 sections. From the experimental results, the flexible suspension bridge possess good mechanical properties.

scholarly journals Numerical and experimental evaluation of masonry prisms by finite element method

2017 ◽  
Vol 10 (2) ◽  
pp. 477-508 ◽  
Author(s):  
C. F.R. SANTOS ◽  
R. C. S. S. ALVARENGA ◽  
J. C. L. RIBEIRO ◽  
L. O CASTRO ◽  
R. M. SILVA ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
High Strength Concrete ◽  
Numerical Models ◽  
High Strength ◽  
Experimental Tests ◽  
Experimental Results ◽  
Concrete Blocks ◽  
Micro Modeling ◽  
Modeling Strategy

Abstract This work developed experimental tests and numerical models able to represent the mechanical behavior of prisms made of ordinary and high strength concrete blocks. Experimental tests of prisms were performed and a detailed micro-modeling strategy was adopted for numerical analysis. In this modeling technique, each material (block and mortar) was represented by its own mechanical properties. The validation of numerical models was based on experimental results. It was found that the obtained numerical values of compressive strength and modulus of elasticity differ by 5% from the experimentally observed values. Moreover, mechanisms responsible for the rupture of the prisms were evaluated and compared to the behaviors observed in the tests and those described in the literature. Through experimental results it is possible to conclude that the numerical models have been able to represent both the mechanical properties and the mechanisms responsible for failure.

scholarly journals Fatigue Fracture Properties of Wood Plastic Composites

2015 ◽  
Vol 71 (12) ◽  
pp. 339-344 ◽  
Author(s):  
Nordin M. N. A. ◽  
Yuta Makino ◽  
Koichi Goda ◽  
Hirokazu Ito
Keyword(s):  
Fatigue Fracture ◽  
Wood Plastic Composites ◽  
Fracture Properties ◽  
Plastic Composites

Mechanical Characterization of UV Photopolymerized PMMA with Different Photo-Initiator Concentration

2021 ◽  
Vol 903 ◽  
pp. 11-16
Author(s):  
M.A. Manjunath ◽  
K. Naveen ◽  
Prakash Vinod ◽  
N. Balashanmugam ◽  
M.R. Shankar
Keyword(s):  
Mechanical Properties ◽  
Light Source ◽  
Polymethyl Methacrylate ◽  
Biomedical Applications ◽  
Mechanical Characterization ◽  
Uv Light ◽  
Curing Time ◽  
Uv Led ◽  
Pmma Resin

Polymethyl methacrylate (PMMA) is one among few known photo-polymeric resin useful in lithography for fabricating structures having better mechanical properties to meet the requirement in electronics and biomedical applications. This study explores the effect of Photo Initiator (PI) concentration and also curing time on strength and hardness of Polymethyl methacrylate (PMMA) obtained by UV photopolymerization of Methyl methacrylate (MMA) monomer. The UV LED light source operating at the wavelength of 364 nm is used with Benzoin Ethyl Ether (BEE) as photo initiator. The curing of PMMA resin is supported with peltier cooling device placed at the bottom of the UV light source. The characterisation study of UV photo cured PMMA is analysed through nano indenter (Agilent Technologies-G200). The current work investigates the influence of PI concentration and curing time in achieving maximum mechanical properties for UV photopolymerized PMMA.

Constitutive modeling for the mechanical behavior of rubber with filler particles

2021 ◽  
Author(s):  
Sankalp Gour ◽  
Deepu Kumar Singh ◽  
Deepak Kumar ◽  
Vinod Yadav
Keyword(s):  
Mechanical Properties ◽  
Carbon Black ◽  
Mechanical Behavior ◽  
Experimental Observation ◽  
Continuum Mechanics ◽  
Constitutive Modeling ◽  
Carbon Nanoparticles ◽  
Material Behavior ◽  
Experimental Results ◽  
Filler Particles

Abstract The present study deals with the constitutive modeling for the mechanical behavior of rubber with filler particles. An analytical model is developed to predict the mechanical properties of rubber with added filler particles based on experimental observation. To develop the same, a continuum mechanics-based hyperelasticity theory is utilized. The model is validated with the experimental results of the chloroprene and nitrile butadiene rubbers filled with different volume fractions of carbon black and carbon nanoparticles, respectively. The findings of the model agree well with the experimental results. In general, the developed model will be helpful to the materialist community working in characterizing the material behavior of tires and other rubber-like materials.

Sign in / Sign up

Export Citation Format

Share Document