scholarly journals The Ritz Method for Boundary Problems with Essential Conditions as Constraints

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Vojin Jovanovic ◽  
Sergiy Koshkin
Keyword(s):  
Boundary Conditions ◽  
Saddle Point ◽  
Lagrange Multipliers ◽  
Ritz Method ◽  
Higher Dimensions ◽  
Boundary Problems ◽  
Elementary Derivation ◽  
Convergence Proof

We give an elementary derivation of an extension of the Ritz method to trial functions that do not satisfy essential boundary conditions. As in the Babuška-Brezzi approach boundary conditions are treated as variational constraints and Lagrange multipliers are used to remove them. However, we avoid the saddle point reformulation of the problem and therefore do not have to deal with the Babuška-Brezzi inf-sup condition. In higher dimensions boundary weights are used to approximate the boundary conditions, and the assumptions in our convergence proof are stated in terms of completeness of the trial functions and of the boundary weights. These assumptions are much more straightforward to verify than the Babuška-Brezzi condition. We also discuss limitations of the method and implementation issues that follow from our analysis and examine a number of examples, both analytic and numerical.

scholarly journals Free In-Plane Vibration of Super-Elliptical Plates

2011 ◽  
Vol 18 (3) ◽  
pp. 471-484 ◽  
Author(s):  
Murat Altekin
Keyword(s):  
Boundary Conditions ◽  
Lagrange Multipliers ◽  
Ritz Method ◽  
Rectangular Plates ◽  
Uniform Thickness ◽  
Plane Vibration ◽  
Good Agreement ◽  
Geometrical Boundary

Free in-plane vibration of super-elliptical plates of uniform thickness was investigated by the Ritz method. A large variety of plate shapes ranging from an ellipse to a rectangle were examined. Two cases were considered: (1) a completely free, and (2) a point-supported plate. The geometrical boundary conditions were satisfied by the Lagrange multipliers. The results were compared with those of rectangular plates. Basically good agreement was obtained. Matching results were reported, and the discrepancies were highlighted.

Spectral Methods

2018 ◽  
Author(s):  
S. G. Rajeev
Keyword(s):  
Simple Model ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Linear Algebra ◽  
Spectral Methods ◽  
Differential Operators ◽  
Higher Dimensions ◽  
Standard Linear ◽  
Sommerfeld Equation ◽  
Spectral Discretization

Thenumerical solution of ordinary differential equations (ODEs)with boundary conditions is studied here. Functions are approximated by polynomials in a Chebychev basis. Sections then cover spectral discretization, sampling, interpolation, differentiation, integration, and the basic ODE. Following Trefethen et al., differential operators are approximated as rectangular matrices. Boundary conditions add additional rows that turn them into square matrices. These can then be diagonalized using standard linear algebra methods. After studying various simple model problems, this method is applied to the Orr–Sommerfeld equation, deriving results originally due to Orszag. The difficulties of pushing spectral methods to higher dimensions are outlined.

scholarly journals A Unified Spectro-Geometric-Ritz Method for Vibration Analysis of Open and Closed Shells with Arbitrary Boundary Conditions

2016 ◽  
Vol 2016 ◽  
pp. 1-30 ◽  
Author(s):  
Dongyan Shi ◽  
Yunke Zhao ◽  
Qingshan Wang ◽  
Xiaoyan Teng ◽  
Fuzhen Pang
Keyword(s):  
Boundary Conditions ◽  
Vibration Analysis ◽  
Ritz Method ◽  
Free Vibration Analysis ◽  
Analysis Model ◽  
Arbitrary Boundary ◽  
Fourier Cosine ◽  
Auxiliary Functions ◽  
Arbitrary Boundary Conditions ◽  
Closed Shells

This paper presents free vibration analysis of open and closed shells with arbitrary boundary conditions using a spectro-geometric-Ritz method. In this method, regardless of the boundary conditions, each of the displacement components of open and closed shells is represented simultaneously as a standard Fourier cosine series and several auxiliary functions. The auxiliary functions are introduced to accelerate the convergence of the series expansion and eliminate all the relevant discontinuities with the displacement and its derivatives at the boundaries. The boundary conditions are modeled using the spring stiffness technique. All the expansion coefficients are treated equally and independently as the generalized coordinates and determined using Rayleigh-Ritz method. By using this method, a unified vibration analysis model for the open and closed shells with arbitrary boundary conditions can be established without the need of changing either the equations of motion or the expression of the displacement components. The reliability and accuracy of the proposed method are validated with the FEM results and those from the literature.

Free vibration analysis of three-layer thin cylindrical shell with variable thickness two-dimensional FGM middle layer under arbitrary boundary conditions

2021 ◽  
pp. 109963622110204
Author(s):  
Xue-Yang Miao ◽  
Chao-Feng Li ◽  
Yu-Lin Jiang ◽  
Zi-Xuan Zhang
Keyword(s):  
Cylindrical Shell ◽  
Boundary Conditions ◽  
Volume Fraction ◽  
Ritz Method ◽  
Admissible Function ◽  
Free Vibration Analysis ◽  
Middle Layer ◽  
Two Dimensional ◽  
Arbitrary Boundary ◽  
Arbitrary Boundary Conditions

In this paper, a unified method is developed to analyze free vibrations of the three-layer functionally graded cylindrical shell with non-uniform thickness. The middle layer is composed of two-dimensional functionally gradient materials (2D-FGMs), whose thickness is set as a function of smooth continuity. Four sets of artificial springs are assigned at the ends of the shells to satisfy the arbitrary boundary conditions. The Sanders’ shell theory is used to obtain the strain and curvature-displacement relations. Furthermore, the Chebyshev polynomials are selected as the admissible function to improve computational efficiency, and the equation of motion is derived by the Rayleigh–Ritz method. The effects of spring stiffness, volume fraction indexes, configuration on of shell, and the change in thickness of the middle layer on the modal characteristics of the new structural shell are also analyzed.

Natural Frequencies of Parallelogrammic Plates Using Characteristic Orthogonal Polynomials in Rayleigh-Ritz Method

1992 ◽  
Author(s):  
L. T. Lee ◽  
W. F. Pon
Keyword(s):  
Boundary Conditions ◽  
Coordinate System ◽  
Orthogonal Polynomials ◽  
Natural Frequencies ◽  
Ritz Method ◽  
Energy Functional ◽  
Comprehensive Treatment ◽  
Energy Functionals ◽  
Simply Supported ◽  
Cartesian Coordinate

Abstract Natural frequencies of parallelogrammic plates are obtained by employing a set of beam characteristic orthogonal polynomials in the Rayleigh-Ritz method. The orthogonal polynomials are generalted by using a Gram-Schmidt process, after the first member is constructed so as to satisfy all the boundary conditions of the corresponding beam problems accompanying the plate problems. The strain energy functional and kinetic energy functionals are transformed from Cartesian coordinate system to a skew coordinate system. The natural frequencies obtained by using the orthogonal polynomial functions are compared with those obtained by other methods with all four edges clamped boundary conditions and greet agreements are found between them. The natural frequencies for parallelogrammic plates with other boundary conditions, such as four edges simply supported, clamped-free and simply supported-free, are also obtained. This method is considered as a better and accurate comprehensive treatment for this type of problems.

Influence of Axial Excitations and of Boundary Conditions on the Parametric Instability of a Beam

1995 ◽  
Author(s):  
Régis Dufour ◽  
Alain Berlioz ◽  
Thomas Streule
Keyword(s):  
Finite Element ◽  
Boundary Conditions ◽  
Ritz Method ◽  
Parametric Instability ◽  
Experimental Tests ◽  
Time Varying ◽  
Periodic Force ◽  
Modal Reduction ◽  
Time Varying Parameter ◽  
The Stability

Abstract In this paper the stability of the lateral dynamic behavior of a pinned-pinned, clamped-pinned and clamped-clamped beam under axial periodic force or torque is studied. The time-varying parameter equations are derived using the Rayleigh-Ritz method. The stability analysis of the solution is based on Floquet’s theory and investigated in detail. The Rayleigh-Ritz results are compared to those of a finite element modal reduction. It shows that the lateral instabilities of the beam depend on the forcing frequency, the type of excitation and the boundary conditions. Several experimental tests enable the validation of the numerical results.

Vibration Analysis of Laminated Composite Rectangular Plates With General Boundary Conditions

2018 ◽  
Author(s):  
Yu Fu ◽  
Jianjun Yao ◽  
Zhenshuai Wan ◽  
Gang Zhao
Keyword(s):  
Boundary Conditions ◽  
Vibration Analysis ◽  
Ritz Method ◽  
Laminated Composite ◽  
Free Vibration Analysis ◽  
Geometric Parameters ◽  
General Boundary ◽  
Rectangular Plates ◽  
General Boundary Conditions ◽  
Benchmark Solutions

In this investigation, the free vibration analysis of laminated composite rectangular plates with general boundary conditions is performed with a modified Fourier series method. Vibration characteristics of the plates have been obtained via an energy function represented in the general coordinates, in which the displacement and rotation in each direction is described as an improved form of double Fourier cosine series and several closed-form auxiliary functions to eliminate any possible jumps and boundary discontinuities. All the expansion coefficients are then treated as the generalized coordinates and determined by Rayleigh-Ritz method. The convergence and reliability of the current method are verified by comparing with the results in the literature and those of Finite Element Analysis. The effects of boundary conditions and geometric parameters on the frequencies are discussed as well. Finally, numerous new results for laminated composite rectangular plates with different geometric parameters are presented for various boundary conditions, which may serve as benchmark solutions for future research.

Hydroelastic Vibration of Rectangular Plates

1996 ◽  
Vol 63 (1) ◽  
pp. 110-115 ◽  
Author(s):  
Moon K. Kwak
Keyword(s):  
Boundary Conditions ◽  
Approximate Formula ◽  
Natural Frequencies ◽  
Mass Matrix ◽  
Ritz Method ◽  
Plate Boundary ◽  
Rigid Wall ◽  
Mode Shapes ◽  
Rectangular Plates ◽  
Virtual Mass

This paper is concerned with the virtual mass effect on the natural frequencies and mode shapes of rectangular plates due to the presence of the water on one side of the plate. The approximate formula, which mainly depends on the so-called nondimensionalized added virtual mass incremental factor, can be used to estimate natural frequencies in water from natural frequencies in vacuo. However, the approximate formula is valid only when the wet mode shapes are almost the same as the one in vacuo. Moreover, the nondimensionalized added virtual mass incremental factor is in general a function of geometry, material properties of the plate and mostly boundary conditions of the plate and water domain. In this paper, the added virtual mass incremental factors for rectangular plates are obtained using the Rayleigh-Ritz method combined with the Green function method. Two cases of interfacing boundary conditions, which are free-surface and rigid-wall conditions, and two cases of plate boundary conditions, simply supported and clamped cases, are considered in this paper. It is found that the theoretical results match the experimental results. To investigate the validity of the approximate formula, the exact natural frequencies and mode shapes in water are calculated by means of the virtual added mass matrix. It is found that the approximate formula predicts lower natural frequencies in water with a very good accuracy.

Sign in / Sign up

Export Citation Format

Share Document