scholarly journals Research on Radial Vibration of a Circular Plate

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Wei Liu ◽  
Donghua Wang ◽  
Hanfeng Lu ◽  
Yumeng Cao ◽  
Pengrong Zhang

Radial vibration of the circular plate is presented using wave propagation approach and classical method containing Bessel solution and Hankel solution for calculating the natural frequency theoretically. In cylindrical coordinate system, in order to obtain natural frequency, propagation and reflection matrices are deduced at the boundaries of free-free, fixed-fixed, and fixed-free using wave propagation approach. Furthermore, radial phononic crystal is constructed by connecting two materials periodically for the analysis of band phenomenon. Also, Finite Element Simulation (FEM) is adopted to verify the theoretical results. Finally, the radial and piezoelectric effects on the band are also discussed.

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Hammouche Khales ◽  
Abdelkader Hassein-Bey ◽  
Abdelkrim Khelif

In this paper, we prove theoretically and experimentally the existence of complete ultrasonic band gap in phononic crystal beam. The phononic beam structure studied is composed of a linear lattice array of square pillars on a beam, made with aluminum-fortal easily machinable at centimetric scale. Ultrasonic characterization of phononic beam guides shows the existence of a frequency range where the transmitted signals are strongly attenuated, due to the presence of ultrasonic band gap, in agreement with theoretical results predicted by finite element simulation. These structures present a potential for the use as energy loss reduction in micromechanical resonators at high frequency regime.


2020 ◽  
Vol 557 (1) ◽  
pp. 85-91
Author(s):  
Selami Palaz ◽  
Zafer Ozer ◽  
Amirullah M. Mamedov ◽  
Ekmel Ozbay

In this study, the band structure and transmission in multiferroic based Sierpinski carpet phononic crystal are investigated based on finite element simulation. In order to obtain the band structure of the phononic crystal (PnC), the Floquet periodicity conditions were applied to the sides of the unit cell. The square lattice PnC consists of various piezoelectric inclusion in a rubber matrix with square and circular cross section.


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Wei Liu ◽  
Guangbin Yu

Based on the previous conventional phononic crystal (PC) structures infinitely periodic in Cartesian coordinates, this paper addresses a new radial phononic crystal annular plate (RPCAP) modeled in a Fibonacci order along the radial direction. In this study, piezoelectric material PZT4 is simultaneously inserted into this RPCAP model to investigate the stop band behaviors. In order to clearly show the transmission characteristics of transverse wave, in cylindrical coordinates, the transfer matrix is deduced through combining the general solutions, piezoelectric governing equations, and continuity conditions. Compared with conventional PC structures, transmission response of transverse vibration for the Fibonacci RPCAP model is calculated theoretically to analyze the stop band phenomenon. Finite element simulation method (FEM) is conducted here to verify the theoretical results. The results show that the Fibonacci RPCAP model presents two newly emerging resonance frequencies while the radial periodic order is disorganized. To thoroughly understand the RPCAP, the effects of structural parameters, material parameters, and piezoelectric parameters on the stop band are discussed in detail. The proposed Fibonacci RPCAP can be employed in many engineering applications, such as in rotating parts which are often coupled with transverse vibration (like gear driving systems).


Crystals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 643
Author(s):  
Soo-Ho Jo ◽  
Byeng D. Youn

Several previous studies have been dedicated to incorporating double defect modes of a phononic crystal (PnC) into piezoelectric energy harvesting (PEH) systems to broaden the bandwidth. However, these prior studies are limited to examining an identical configuration of the double defects. Therefore, this paper aims to propose a new design concept for PnCs that examines differently configured double defects for broadband elastic wave energy localization and harvesting. For example, a square-pillar-type unit cell is considered and a defect is considered to be a structure where one piezoelectric patch is bonded to a host square lattice in the absence of a pillar. When the double defects introduced in a PnC are sufficiently distant from each other to implement decoupling behaviors, each defect oscillates like a single independent defect. Here, by differentiating the geometric dimensions of two piezoelectric patches, the defects’ dissimilar equivalent inertia and stiffness contribute to individually manipulating defect bands that correspond to each defect. Hence, with adequately designed piezoelectric patches that consider both the piezoelectric effects on shift patterns of defect bands and the characteristics for the output electric power obtained from a single-defect case, we can successfully localize and harvest the elastic wave energy transferred in broadband frequencies.


Author(s):  
Weipeng Hu ◽  
Mengbo Xu ◽  
Ruisong Jiang ◽  
Chuanzeng Zhang ◽  
Zichen Deng

2014 ◽  
Vol 28 (32) ◽  
pp. 1450231 ◽  
Author(s):  
Hai-Sheng Shu ◽  
Xiao-Na Shi ◽  
Shi-Dan Li ◽  
Shao-Gang Liu ◽  
Wei-Yuan Wang ◽  
...  

For the propagation of harmonic longitudinal stress wave in phononic crystal rod (PCR), transfer matrix of elastic wave in PCR was derived based on the wave equation and band structure of infinite PCR was calculated. For semi-infinite PCR, theoretical derivation of dynamic stress solutions of arbitrary section and internal interfaces was conducted with Bloch theorem. Inherent relationship between dynamic stress and surface wave modal frequency (SWMF) was analyzed. Afterwards, numerical computation mainly focusing on dynamic stress level of the internal interfaces of PCR was given in detail. Finally, numerical analysis for finite PCR was carried out and verified by finite element simulation. Our results show that SWMF has a significant influence on the dynamic stress, and exactly it is the formal pole of stress solution whose nature is directly determined by the sort order of the two materials constituting the PCR.


2011 ◽  
Vol 1 (32) ◽  
pp. 15
Author(s):  
Yang-Yih Chen ◽  
Meng-Syue Li ◽  
Hung-Chu Hsu ◽  
Ying-Pin Lin

In this paper, a new third-order Lagrangian asymptotic solution describing nonlinear water wave propagation on the surface of a uniform sloping bottom is presented. The model is formulated in the Lagrangian variables and we use a two-parameter perturbation method to develop a new mathematical derivation. The particle trajectories, wave pressure and Lagrangian velocity potential are obtained as a function of the nonlinear wave steepness  and the bottom slope  perturbed to third order. The analytical solution in Lagrangian form satisfies state of the normal pressure at the free surface. The condition of the conservation of mass flux is examined in detail for the first time. The two important properties in Lagrangian coordinates, Lagrangian wave frequency and Lagrangian mean level, are included in the third-order solution. The solution can also be used to estimate the mean return current for waves progressing over the sloping bottom. The Lagrangian solution untangle the description of the features of wave shoaling in the direction of wave propagation from deep to shallow water, as well as the process of successive deformation of a wave profile and water particle trajectories leading to wave breaking. The proposed model has proved to be capable of a better description of non-linear wave effects than the corresponding approximation of the same order derived by using the Eulerian description. The proposed solution has also been used to determine the wave shoaling process, and the comparisons between the experimental and theoretical results are presented in Fig.1a~1b. In addition, the basic wave-breaking criterion, namely the kinematical Stokes stability condition, has been investigated. The comparisons between the present theory, empirical formula of Goda (2004) and the experiments made by Iwagali et al.(1974), Deo et al.(2003) and Tsai et al.(2005) for the breaking index(Hb/L0) versus the relative water depth(d0/L0) under two different bottom slopes are depicted in Figs 2a~2b. It is found that the theoretical breaking index is well agreement with the experimental results for three bottom slopes. However,for steep slope of 1/3 shown in Fig 2b, the result of Goda‘s empirical formula gives a larger value in comparison with the experimental data and the present theory. Some of empirical formulas presented the breaking wave height in terms of deepwater wave condition, such as in Sunamura (1983) and in Rattanapitikon and Shibayama(2000). Base on the results depicted in Fig. 3a~3b, it showed that the theoretical results are in good agreement with the experimental data (Iwagali et al. 1974, Deo et al.2003 and Tsai et al. 2005) than the empirical formulas. The empirical formula of Sunamura (1983) always predicts an overestimation value.


2021 ◽  
pp. 1-30
Author(s):  
Ignacio Arretche ◽  
Kathryn Matlack

Abstract Locally resonant materials allow for wave propagation control in the sub-wavelength regime. Even though these materials do not need periodicity, they are usually designed as periodic systems since this allows for the application of the Bloch theorem and analysis of the entire system based on a single unit cell. However, geometries that are invariant to translation result in equations of motion with periodic coefficients only if we assume plane wave propagation. When wave fronts are cylindrical or spherical, a system realized through tessellation of a unit cell does not result in periodic coefficients and the Bloch theorem cannot be applied. Therefore, most studies of periodic locally resonant systems are limited to plane wave propagation. In this paper, we address this limitation by introducing a locally resonant effective phononic crystal composed of a radially-varying matrix with attached torsional resonators. This material is not geometrically periodic but exhibits effective periodicity, i.e. its equations of motion are invariant to radial translations, allowing the Bloch theorem to be applied to radially propagating torsional waves. We show that this material can be analyzed under the already developed framework for metamaterials. To show the importance of using an effectively periodic system, we compare its behavior to a system that is not effectively periodic but has geometric periodicity. We show considerable differences in transmission as well as in the negative effective properties of these two systems. Locally resonant effective phononic crystals open possibilities for subwavelength elastic wave control in the near field of sources.


2020 ◽  
Vol 60 (2) ◽  
pp. 127-144
Author(s):  
Saheed Salawu ◽  
Gbeminiyi Sobamowo ◽  
Obanishola Sadiq

The study of the dynamic behaviour of non-uniform thickness circular plate resting on elastic foundations is very imperative in designing structural systems. This present research investigates the free vibration analysis of varying density and non-uniform thickness isotropic circular plates resting on Winkler and Pasternak foundations. The governing differential equation is analysed using the Galerkin method of weighted residuals. Linear and nonlinear case is considered, the surface radial and circumferential stresses are also determined. Thereafter, the accuracy and consistency of the analytical solutions obtained are ascertained by comparing the existing results available in pieces of literature and confirmed to be in a good harmony. Also, it is observed that very accurate results can be obtained with few computations. Issues relating to the singularity of circular plate governing equations are handled with ease. The analytical solutions obtained are used to determine the influence of elastic foundations, homogeneity and thickness variation on the dynamic behaviour of the circular plate, the effect of vibration on a free surface of the foundation as well as the influence of radial and circumferential stress on mode shapes of the circular plate considered. From the results, it is observed that a maximum of 8.1% percentage difference is obtained with the solutions obtained from other analytical methods. Furthermore, increasing the elastic foundation parameter increases the natural frequency. Extrema modal displacement occurs due to radial and circumferential stress. Natural frequency increases as the thickness of the circular plate increases, Conversely, a decrease in natural frequency is observed as the density varies. It is envisioned that; the present study will contribute to the existing knowledge of the classical theory of vibration.


Sign in / Sign up

Export Citation Format

Share Document