scholarly journals Reliability and Accuracy of Angular Measurements on Laser Scanning Created 3D Models of Dry Skulls

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Diana Toneva ◽  
Silviya Nikolova ◽  
Ivan Georgiev

The aim of the study was to assess the accuracy and reliability of skull angles measured on 3D models created by laser scanning. Five skulls were measured through both conventional and digital measuring methods. The 3D models were created using a hand-held laser scanner Creaform VIUscan™. Seven angular characteristics were measured three times by two observers. The intra- and interobserver reliability were assessed using intraclass correlation coefficient. The differences between the digital and direct measurements were assessed using the measurement and relative errors. The intraclass correlation coefficients for digitally taken angles indicated almost perfect intra- and interobserver reliability, except for the alveolar profile angle showing moderate interobserver agreement. The overall measurement error based on the differences between digitally and directly measured angles was 0.61° and the relative error was 0.68%.

1991 ◽  
Vol 34 (5) ◽  
pp. 989-999 ◽  
Author(s):  
Stephanie Shaw ◽  
Truman E. Coggins

This study examines whether observers reliably categorize selected speech production behaviors in hearing-impaired children. A group of experienced speech-language pathologists was trained to score the elicited imitations of 5 profoundly and 5 severely hearing-impaired subjects using the Phonetic Level Evaluation (Ling, 1976). Interrater reliability was calculated using intraclass correlation coefficients. Overall, the magnitude of the coefficients was found to be considerably below what would be accepted in published behavioral research. Failure to obtain acceptably high levels of reliability suggests that the Phonetic Level Evaluation may not yet be an accurate and objective speech assessment measure for hearing-impaired children.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Minjeong Kim ◽  
Ja Young Oh ◽  
Seon Ha Bae ◽  
Seung Hyeun Lee ◽  
Won Jun Lee ◽  
...  

AbstractWe evaluated the reliability and validity of the 5-scale grading system to interpret the point-of-care immunoassay for tear matrix metalloproteinase (MMP)-9. Six observers graded red bands of photographs of the readout window in MMP-9 immunoassay kit (InflammaDry) two times with 2-week interval based on the 5-scale grading system (i.e. grade 0–4). Interobserver and intraobserver reliability were evaluated using intraclass correlation coefficients. The interobserver agreements were analyzed according to the severity of tear MMP-9 expression. To validate the system, a concentration calibration curve was made using MMP-9 solutions with reference concentrations, then the distribution of MMP-9 concentrations was analyzed according to the 5-scale grading system. Both intraobserver and interobserver reliability was excellent. The readout grades were significantly correlated with the quantified colorimetric densities. The interobserver variance of readout grades had no correlation with the severity of the measured densities. The band density continued to increase up to a maximal concentration (i.e. 5000 ng/mL) according to the calibration curve. The difference of grades reflected the change of MMP-9 concentrations sensitively, especially between grade 2 and 4. Together, our data indicate that the subjective 5-scale grading system in the point-of-care MMP-9 immunoassay is an easy and reliable method with acceptable accuracy.


Author(s):  
Ian S. MacLean ◽  
Taylor M. Southworth ◽  
Ian J. Dempsey ◽  
Neal B. Naveen ◽  
Hailey P. Huddleston ◽  
...  

AbstractThe tibial tubercle–trochlear groove (TT-TG) distance is currently utilized to evaluate knee alignment in patients with patellar instability. Sagittal plane pathology measured by the sagittal tibial tubercle–trochlear groove (sTT-TG) distance has been described in instability but may also be important to consider in patients with cartilage injury. This study aims to (1) describe interobserver reliability of the sTT-TG distance and (2) characterize the change in the sTT-TG distance with respect to changing knee flexion angles. In this cadaveric study, six nonpaired cadaveric knees underwent magnetic resonance imaging (MRI) studies at each of the following degrees of knee flexion: −5, 0, 5, 10, 15, and 20. The sTT-TG distance was measured on the axial T2 sequence. Four reviewers measured this distance for each cadaver at each flexion angle. Intraclass correlation coefficients were calculated to determine interobserver reliability and reproducibility of the sTT-TG measurement. Analysis of variance (ANOVA) tests and Friedman's tests with a Bonferroni's correction were performed for each cadaver to compare sTT-TG distances at each flexion angle. Significance was defined as p < 0.05. There was excellent interobserver reliability of the sTT-TG distance with all intraclass correlation coefficients >0.9. The tibial tubercle progressively becomes more posterior in relation to the trochlear groove (more negative sTT-TG distance) with increasing knee flexion. The sTT-TG distance is a measurement that is reliable between attending surgeons and across training levels. The sTT-TG distance is affected by small changes in knee flexion angle. Awareness of knee flexion angle on MRI is important when this measurement is utilized by surgeons.


2019 ◽  
Vol 40 (6) ◽  
pp. 720-726 ◽  
Author(s):  
Jian Zhong Zhang ◽  
François Lintz ◽  
Alessio Bernasconi ◽  
Shu Zhang ◽  

Background: Weightbearing computed tomography (WBCT) is a useful tool for the assessment of hindfoot alignment (HA). Foot ankle offset (FAO) is a recently introduced parameter, determined from WBCT images using semiautomatic software. The aim of this study was to determine the clinical relevance and reproducibility of FAO for the evaluation of HA. Methods: A prospective comparative study was performed on consecutive patients requiring bilateral WBCT between September 2017 and April 2018. Based on the clinical assessment of HA, patients were divided into 3 groups: (1) normal alignment group (G1), (2) valgus (G2), and (3) varus (G3). FAO and long axial view (HACT) were measured on WBCT images, and the groups were compared. The reproducibility of FAO and HACT was determined through intraclass correlation coefficients (ICCs). Regression analysis was performed to investigate the correlation between the 2 methods. Overall, 249 feet (126 patients) were included (G1 = 115, G2 = 78, and G3 = 56 feet). Results: The mean values for FAO and HACT were 1.2% ± 2.8% and 3.9 ± 3.1, respectively, in G1; 8.1% ± 3.7% and 9.7 ± 4.9 in G2; and −6.6% ± 4.8% and −8.2 ± 6.6 in G3. Intra- and interobserver reliability was 0.987 and 0.988 for FAO and 0.949 and 0.949 for HACT, respectively. There was a good linear correlation between HACT and FAO ( R2 = 0.744), with a regression slope of 1.064. Conclusions: WBCT was a useful method for the characterization of HA. FAO was reproducible and correlated well with physical examination. Level of Evidence: Level II, prospective comparative study.


2011 ◽  
Vol 101 (6) ◽  
pp. 475-483 ◽  
Author(s):  
Michael E. Graham ◽  
Avanthi Chikka ◽  
Paul C. Jones

Background: Radiographs provide valuable information for assessing osseous foot deformities and aid in accurate diagnosis. The radiographic angular measurements can be used to establish a relationship between the forefoot and the hindfoot that will present valuable information about normal versus pathologic alignment of the foot. The talar–first metatarsal (T1M) angle is frequently used as one of these angles in this capacity; however, there are limitations to the anteroposterior T1M angle. We present a more consistent, reproducible, and accurate measurement for determining foot abnormalities in the transverse plane using the T2M angle instead of the T1M angle. Methods: Seventy feet in 35 participants (12 men and 23 women) were considered for this study. Individuals were selected on the basis of the established inclusion and exclusion criteria. Anteroposterior radiographs were taken in the angle and base of gait, the neutral calcaneal stance position (NCSP), and the resting calcaneal stance position (RCSP). Three observers measured these angles using three different methods. Results: The mean ± SD T2M angle was 2.95° ± 7.16° in NCSP and 18.61° ± 7.21° in RCSP. No significant differences were found among the measurements made by the three observers using slightly varying procedures in NCSP and RCSP (P &gt; .05). The intraclass correlation coefficients among the measurements were 0.905 in NCSP and 0.937 in RCSP. Bland-Altman plots showed very good agreement between the measurements made by the three observers. Conclusions: The anteroposterior T2M angle gives a consistent and reproducible measurement that provides accurate information about foot alignment. (J Am Podiatr Med Assoc 101(6): 475–483, 2011)


Scientifica ◽  
2014 ◽  
Vol 2014 ◽  
pp. 1-5
Author(s):  
Zeki Dostbil ◽  
Yusuf Dag ◽  
Ozlem Cetinkaya ◽  
Mehmet Akdag ◽  
Bekir Tasdemir

Objectives.The measurement of mucociliary transport velocity by rhinoscintigraphy with Tc-99m-macroaggregated albumin (99mTc-MAA) is reliable measure of mucociliary clearance. The aim of this study is to assess the intratest, interobserver, and intraobserver reproducibility of nasal mucociliary transport rate (NMTR) measurement.Materials and Methods.Twenty-two subjects were evaluated to determine intratest reproducibility and a group of 35 subjects was examined to determine inter- and intraobserver reproducibility. Rhinoscintigraphy with99mTc-MAA was used to measure NMTR in all study subjects. Paired NMTR measurements were compared using a range of statistical methodologies. Intraclass correlation coefficients (ICC) and repeatability coefficients and Bland-Altman plots were applied to assess the degree of intratest, interobserver, and intraobserver variation.Results.Statistical analysis of test and retest experiments demonstrated the statistical equivalence of intratest NMTR measurements, interobserver NMTR measurements, and intraobserver NMTR measurements. The intratest ICC, interobserver ICC, and intraobserver ICC were 0.96, 0.83, and 0.91, respectively, indicating that intratest and intraobserver reproducibility are excellent and interobserver reproducibility is good.Conclusions.Rhinoscintigraphy using99mTc-MAA results in highly reproducible measurement of NMTR. The use of radionuclide imaging in measuring NMTR results in excellent intratest and intraobserver reproducibility and good interobserver reliability.


2020 ◽  
pp. 193229682097465
Author(s):  
Joel Willem Johan Lasschuit ◽  
Jill Featherston ◽  
Katherine Thuy Trang Tonks

Background: In an era of increasing technology and telehealth utilization, three-dimensional (3D) wound cameras promise reliable, rapid, and touch-free ulceration measurements. However, reliability data for commercially available devices in the diabetes foot service setting is lacking. We aimed to evaluate the reliability of diabetes-related foot ulceration measurement using a 3D wound camera in comparison to the routinely used ruler and probe. Method: Participants were prospectively recruited from a tertiary interdisciplinary diabetes foot service. Ulcerations were measured at each visit by two blinded observers, first by ruler and probe, and then using a 3D wound camera twice. Reliability was evaluated using intraclass correlation coefficients (ICC). Measurement methods were compared by Pearson correlation. Results: Sixty-three ulcerations affecting 38 participants were measured over 122 visits. Interobserver reliability of ruler measurement was excellent for estimated area (ICC 0.98, 95% CI 0.97-0.98) and depth (ICC 0.93, 95% CI 0.90-0.95). Intraobserver and interobserver reliability of the 3D wound camera area was excellent (ICC 0.96, 95%CI 0.95-0.97 and 0.97 95% CI 0.96-0.98, respectively). Depth was unrecordable in over half of 3D wound camera measurements, and reliability was inferior to probe measurement. Area correlation between methods was good ( R = 0.88 and 0.94 per observer); however, depth correlation was poor ( R = 0.49 and 0.65). Conclusions: 3D wound cameras offer practical advantages over ruler-based measurement. In diabetes-related foot ulceration, the reliability and comparability of area measurement was excellent across both methods, although depth was more reliably obtained by the probe. These limitations, together with cost, are important considerations if implementing this technology in diabetes foot care.


2000 ◽  
Vol 122 (2) ◽  
pp. 212-215 ◽  
Author(s):  
Fatma Tulin Kayhan ◽  
David Zurakowski ◽  
Steven D. Rauch

The Toronto Facial Grading System (TFGS) is an observer scale for rating facial nerve dysfunction. The TFGS scores aspects of resting symmetry, symmetry of voluntary movement, and synkinesis for each division of the face (subscores) and then provides calculated total scores and an overall composite score of facial function. The developers of the scale have validated its sensitivity for identifying small changes in facial dysfunction and the independence of the different components measured. Herein we report our results in a study of interob-server reliability using the TFGS. Twenty-five patients from the Massachusetts Eye and Ear Infirmary Facial Nerve Center with varying degrees of facial paresis, paralysis, and synkinesis were videotaped, and the video recordings were scored by 5 independent observers using the TFGS. Intraclass correlation coefficients (κ) and 95% confidence intervals were calculated for subscores and for each total and composite score. Intraclass correlation coefficients ranged from 0.59 to 0.85, all considered substantial to near-perfect agreement between observers. We believe the TFGS is superior to other scales by virtue of its sensitivity, comprehensiveness, ease of use, and interobserver reliability. The TFGS presently appears to be the best option in those situations in which accurate and precise documentation of facial function is required.


Author(s):  
Siang Wei Gan ◽  
Natalie Lee ◽  
Siao En Tan ◽  
Suzanne M Edwards ◽  
George K Kiroff ◽  
...  

SUMMARY The etiology of postfundoplication dysphagia remains incompletely understood. Subtle changes of gastroesophageal junction (GEJ) anatomy may be contributory. Barium swallows have potential for standardization to evaluate postsurgical anatomical features. Using structured barium swallows, we aim to identify reproducible, objectively measured postfundoplication anatomical features that will permit future comparison between patients with/without dysphagia. At 6–12 months of postfundoplication, 31 patients underwent structured barium swallow with video–fluoroscopy recording: standing anteroposterior; standing oblique (×2); prone oblique (×2); and prone oblique with continuous free drinking. A primary observer recorded 11 variables of GEJ anatomy for each view, repeated 3 months later, forming two datasets to assess intraobserver consistency. Interobserver reliability was determined using a dataset each from the primary observer and two medical students (after training). Intraclass correlation coefficients (ICC) were based on two-way mixed-effects model (ICC agreement: 0.40–0.59 ‘fair’; 0.60–0.74 ‘good’; 0.75–1.00 ‘excellent’). Interobserver reliability was good–excellent for 47 of 66 measurements. Measures of maximal esophageal diameter cf. wrap opening diameter and posterior esophageal angle showed high interobserver reproducibility on all views (ICC range 0.84–0.91; 0.68–0.80, respectively). Interobserver agreement was good–excellent for 5/6 views when measuring anterior GEJ displacement and axis deviation (ICC range 0.56–0.79; 0.41–0.77, respectively). Measures of wrap length showed lower reproducibility. Prone oblique measurements showed highest reproducibility (good–excellent agreement in 19/22 measurements). Intraobserver consistency was excellent for 98% of measurements (ICC range 0.74–0.99). Objective measurements of postfundoplication GEJ anatomy using structured barium swallow are reproducible and may allow further interrogation of anatomical features contributing to postfundoplication dysphagia.


2019 ◽  
Vol 41 (2) ◽  
pp. 154-159 ◽  
Author(s):  
Matthew S. Conti ◽  
Aoife MacMahon ◽  
Scott J. Ellis ◽  
Elizabeth A. Cody

Background: Despite the importance of shoe wear to patients with hallux valgus (HV), few studies have investigated changes in foot width following surgery in this population. The purpose of our study was to determine if the modified Lapidus procedure would effectively decrease foot width in patients with HV. Methods: Thirty-one feet (19 left, 12 right) in 30 patients (29 females, 1 male) who underwent a modified Lapidus procedure in combination with a modified McBride and Akin osteotomy for treatment of HV were included in the study. All patients had preoperative and at least 5-month postoperative imaging, consisting of both weightbearing radiographs and computed tomography (WBCT) scans, which were used to measure bony and soft tissue foot widths pre- and postoperatively by 2 independent observers. Results: Intraclass correlation coefficients (ICCs) demonstrated high interobserver reliability (all ICCs >0.90). Bony foot width decreased significantly, by a mean of 8.9 mm (9.1%) on radiographs and 7.9 mm (8.4%) on WBCT scans ( P < .001). The soft tissue foot width also decreased significantly, by a mean of 6.9 mm (6.3%) on radiographs and 6.7 mm (6.4%) on WBCT scans ( P < .001). Changes in the hallux valgus angle and intermetatarsal angle correlated with changes in bony foot width on WBCTs (both r > 0.4, P < .02). Conclusions: The modified Lapidus procedure in combination with a modified McBride and Akin osteotomy resulted in statistically significant changes in both bony and soft tissue foot width. Patients should be counseled that foot width decreases, on average, by 0.5 to 1 cm. Level of Evidence: Level III, comparative series.


Sign in / Sign up

Export Citation Format

Share Document