scholarly journals Study on Plastic Coated Overburnt Brick Aggregate as an Alternative Material for Bituminous Road Construction

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Dipankar Sarkar ◽  
Manish Pal ◽  
Ashoke K. Sarkar
Keyword(s):  
Fatigue Life ◽  
Road Construction ◽  
Mix Design ◽  
Waste Plastics ◽  
Test Results ◽  
Bitumen Content ◽  
Alternative Material ◽  
Constructional Work ◽  
Marshall Stability ◽  
Bituminous Concrete

There are different places in India where natural stone aggregates are not available for constructional work. Plastic coated OBBA can solve the problem of shortage of stone aggregate to some extent. The engineers are always encouraged to use locally available materials. The present investigation is carried out to evaluate the plastic coated OBBA as an alternative material for bituminous road construction. Shredded waste plastics are mixed with OBBA in different percentages as 0.38, 0.42, 0.46, 0.50, 0.54, and 0.60 of the weight of brick aggregates. Marshall Method of mix design is carried out to find the optimum bitumen content of such bituminous concrete mix prepared by plastic coated OBBA. Bulk density, Marshall Stability, flow, Marshall Quotient, ITS, TSR, stripping, fatigue life, and deformations have been determined accordingly. Marshall Stability value of 0.54 percent of plastic mix is comparatively higher than the other mixes except 0.60 percent of plastic mix. Test results are within the prescribed limit for 0.54 percent of plastic mix. There is a significant reduction in rutting characteristics of the same plastic mix. The fatigue life of the mix is also significantly higher. Thus plastic coated OBBA is found suitable in construction of bituminous concrete road.

Modeling of Polypropylene Modified Bitumen Mix Design Results Using Regression Analysis

2017 ◽  
pp. 256-275
Author(s):  
Kaval Chhabra ◽  
Divesh Agrawal ◽  
Saladi S. V. Subbarao
Keyword(s):  
Unit Weight ◽  
Waste Plastics ◽  
Test Results ◽  
Modified Bitumen ◽  
Modeling Framework ◽  
Air Voids ◽  
Marshall Test ◽  
Input Variables ◽  
Marshall Stability ◽  
Plastic Content

This study investigates the effects of mixing Polypropylene waste plastics in the bituminous mix for the design of Flexible Pavement. Since, obtaining Marshall Test results from the bituminous mix is time-consuming, so if the practitioners measure the values of stability and flow by mechanical testing, other computations can be done by applying simple mathematical calculations. So, this study carried out stability and flow tests on different specimens made with varying bitumen and polypropylene plastic content. From the initial test results, the optimum bitumen and plastic contents are found. Further, the test results obtained from Marshall Test are modelled by identifying various input variables, which are various physical properties of the mix such as plastic content, bitumen content, air voids and unit weight. The regression modeling framework is adopted in this study to predict the Marshall stability and flow value. Since the developed models have yielded good results, these can be effectively used in parameter estimation, and thus aids the future researchers.

Modeling of Polypropylene Modified Bitumen Mix Design Results Using Regression Analysis

2020 ◽  
pp. 1644-1663
Author(s):  
Kaval Chhabra ◽  
Divesh Agrawal ◽  
Saladi S. V. Subbarao
Keyword(s):  
Unit Weight ◽  
Waste Plastics ◽  
Test Results ◽  
Modified Bitumen ◽  
Modeling Framework ◽  
Air Voids ◽  
Marshall Test ◽  
Input Variables ◽  
Marshall Stability ◽  
Plastic Content

This study investigates the effects of mixing Polypropylene waste plastics in the bituminous mix for the design of Flexible Pavement. Since, obtaining Marshall Test results from the bituminous mix is time-consuming, so if the practitioners measure the values of stability and flow by mechanical testing, other computations can be done by applying simple mathematical calculations. So, this study carried out stability and flow tests on different specimens made with varying bitumen and polypropylene plastic content. From the initial test results, the optimum bitumen and plastic contents are found. Further, the test results obtained from Marshall Test are modelled by identifying various input variables, which are various physical properties of the mix such as plastic content, bitumen content, air voids and unit weight. The regression modeling framework is adopted in this study to predict the Marshall stability and flow value. Since the developed models have yielded good results, these can be effectively used in parameter estimation, and thus aids the future researchers.

scholarly journals The effect of crumb rubber in dense graded and open graded cold mixture asphalt

2021 ◽  
Vol 907 (1) ◽  
pp. 012008
Author(s):  
P S Wulandari ◽  
D Tjandra
Keyword(s):  
Road Construction ◽  
Crumb Rubber ◽  
Asphalt Mixtures ◽  
Mix Design ◽  
Type Iv ◽  
Traffic Loads ◽  
Fine Aggregates ◽  
Bitumen Content ◽  
Good Comparison ◽  
Total Mixture

Abstract Recycling tires is one of the eco-friendly way for reducing environmental problems. Incorporating crumb rubber in asphalt mixtures is an alternative way for reusing the end-of-life tires in road construction. The main purpose of this study is to evaluate the cold mix asphalt incorporating crumb rubber as a substitute for a part of fine aggregates. In this study, the aggregate gradations for mix design were selected according to the specification, Dense Graded Emulsion Mixtures (DGEM) Type IV and Open Graded Emulsion Mixtures (OGEM) Type E/20. The design bitumen content in this study was optimized for stability, void in mixture (porosity), and density. Crumb Rubber (CR) emulsion mixtures were made with optimum bitumen content at 8% by mass of total mixture for DGEM and OGEM. In order to incorporate crumb rubber into the cold emulsion mixtures, laboratory testing were performed for 25% and 50% of fine aggregates replaced with an equal volume of crumb rubber. In general, CR emulsion mixtures showed good results in all parameters. The CR emulsion mixtures also had a good comparison to hot mix asphalt specification for medium volume traffic loads with porosity less than 10%. From this study, crumb rubber can be recommended as a substitution material of fine aggregates in cold mix asphalt.

Study on the stiffness degradation in concrete continuous beam with externally prestressed CFRP tendons under fatigue loading

2021 ◽  
pp. 136943322199249
Author(s):  
Xing Li ◽  
Jiwen Zhang ◽  
Jun Cheng
Keyword(s):  
Fatigue Life ◽  
Fatigue Loading ◽  
Load Level ◽  
Fiber Reinforced Polymer ◽  
Stiffness Degradation ◽  
Test Results ◽  
Reinforced Polymer ◽  
Continuous Beams ◽  
Practical Engineering ◽  
Good Agreement

This paper presents fatigue behaviors and the stiffness degradation law of concrete continuous beams with external prestressed carbon fiber-reinforced polymer (CFRP) tendons. Three specimens were tested under fatigue loading, and the influence of different load levels on the stiffness degradation and fatigue life were studied, and it was found that the stiffness degradation of three test specimens exhibited a three-stage change rule, namely rapid decrease, stable degradation, and sharp decline, but there are obvious differences in the rate and amplitude of stiffness degradation. The load level has a significant influence on the fatigue life of the test specimens. An analytical model with load level considered was proposed to calculate the residual stiffness and predict the stiffness degradation, which is in good agreement with the test results. The model of stiffness degradation presents a possible solution for practical engineering applications of concrete continuous beams with externally prestressed CFRP tendons subjected to different fatigue loadings.

scholarly journals Impact of Graphene Oxide on Zero Shear Viscosity, Fatigue Life and Low-Temperature Properties of Asphalt Binder

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3073
Author(s):  
Abbas Mukhtar Adnan ◽  
Chaofeng Lü ◽  
Xue Luo ◽  
Jinchang Wang
Keyword(s):  
Graphene Oxide ◽  
Fatigue Life ◽  
Low Temperature ◽  
Shear Viscosity ◽  
Storage Stability ◽  
Asphalt Binder ◽  
Asphalt Binders ◽  
Test Results ◽  
Zero Shear Viscosity ◽  
Modified Asphalt

This study has investigated the impact of graphene oxide (GO) in enhancing the performance properties of an asphalt binder. The control asphalt binder (60/70 PEN) was blended with GO in contents of 0%, 0.5%, 1%, 1.5%, 2%, and 2.5%. The permanent deformation behavior of the modified asphalt binders was evaluated based on the zero shear viscosity (ZSV) parameter through a steady shear test approach. Superpave fatigue test and the linear amplitude sweep (LAS) method were used to evaluate the fatigue behavior of the binders. A bending beam rheometer (BBR) test was conducted to evaluate the low-temperature cracking behavior. Furthermore, the storage stability of the binders was investigated using a separation test. The results of the ZSV test showed that GO considerably enhanced the steady shear viscosity and ZSV value, showing a significant contribution of the GO to the deformation resistance; moreover, GO modification changed the asphalt binder’s behavior from Newtonian to shear-thinning flow. A notable improvement in fatigue life was observed with the addition of GO to the binder based on the LAS test results and Superpave fatigue parameter. The BBR test results revealed that compared to the control asphalt, the GO-modified binders showed lower creep stiffness (S) and higher creep rate (m-value), indicating increased cracking resistance at low temperatures. Finally, the GO-modified asphalt binders exhibited good storage stability under high temperatures.

scholarly journals Analysis of the Correlation between the Static and Fatigue Test Results of the Interlayer Bondings of Asphalt Layers

2016 ◽  
Vol 62 (1) ◽  
pp. 83-98 ◽  
Author(s):  
A. Szydło ◽  
K. Malicki
Keyword(s):  
Fatigue Life ◽  
Fatigue Test ◽  
Asphalt Mixture ◽  
Fatigue Tests ◽  
Test Results ◽  
Static Tests ◽  
Bonding State ◽  
Road Pavement ◽  
The Future ◽  
Pavement Structure

Abstract The bonding state of the asphalt layers in a road pavement structure significantly affects its fatigue life. These bondings, therefore, require detailed tests and optimization. In this paper, the analyses of the correlation between the results of laboratory static tests and the results of fatigue tests of asphalt mixture interlayer bondings were performed. The existence of the relationships between selected parameters was confirmed. In the future, the results of these analyses may allow for assessment of interlayer bondings’ fatigue life based on the results of quick and relatively easy static tests.

Modelling of Flow Properties of Asphalt Mastics

2013 ◽  
Vol 752 ◽  
pp. 209-216 ◽  
Author(s):  
Róbert Géber ◽  
László A. Gömze
Keyword(s):  
Research Work ◽  
Road Construction ◽  
Test Results ◽  
Flow Properties ◽  
Rheological Models ◽  
Fine Grained ◽  
Mineral Particles ◽  
Asphalt Mastics ◽  
Rheological Modelling ◽  
Mineral Fillers

The present research work deals with the examination and rheological modelling of flow properties of asphalt mastics which are the most important components of asphalt concretes. Asphalt mastics are mixtures of fine grained mineral filler particles (d<0,063 mm) and bitumen, having a stabilizing role in asphalt mixtures and largely determining the cohesion between mineral particles and bitumen. During our examinations two types of mineral fillers – limestone and dolomite – as well as standard bitumen were tested, which are extensively used in Hungarian road construction. Asphalt mastic mixtures were prepared out of these materials and they were tested with dynamic shear rheometer (DSR). According to the test results, rheological models of mastics were determined. It has been established that at different test temperatures and shear rate ranges asphalt mastics behave as Herschel-Bulkley and Bingham-type materials.

Performance Characterization of Stone Mastic Asphalt using Steel Fiber

2021 ◽  
Vol 02 (02) ◽  
Author(s):  
Ekarizan Shaffie ◽  
◽  
H.A. Rashid ◽  
Fiona Shiong ◽  
Ahmad Kamil Arshad ◽  
...  
Keyword(s):  
Steel Fiber ◽  
Mechanical Performance ◽  
Permanent Deformation ◽  
Asphalt Mixture ◽  
Moisture Susceptibility ◽  
Mastic Asphalt ◽  
Bitumen Content ◽  
Stone Mastic Asphalt ◽  
The Stability ◽  
Marshall Stability

Stone Mastic Asphalt (SMA) is a gap-graded hot mixture designed to provide higher resistance towards permanent deformation and rutting potential by 30% to 40% more than dense-graded asphalt, due to its stable aggregate skeleton structure. However, compared to other types of hot mix asphalt, SMA unfortunately has some shortcomings in term of its susceptibility towards moisture-induced damage due to its structure and excessive bitumen content in the composition. This research aims to assess the performance of a SMA mixture with steel fiber by enhancing overall stability, abrasion resistance, and, most importantly, moisture susceptibility. This study involved the incorporation of various steel fiber proportions of 0%, 0.3%, 0.5% and 0.7% by the total weight of mixture. The steel fiber modified SMA was made up of 6.0% PEN 60/70 bitumen content. The performance of SMA were evaluated through Marshall stability and flow test, Cantabro loss test and indirect tensile strength test. The results obtained from the testing showed that the incorporation of steel fiber is significantly effective to enhance the resistance towards moisture damage, while increasing the stability and reducing the abrasion loss of SMA mixture, compared to conventional mixture. Overall, it can be concluded that the addition of steel fiber in asphalt mixture specifically SMA, has improved the mechanical performance in the application of asphalt pavement with the optimum steel fiber proportion of 0.3% by the weight of mixture. The developed models between the independent variables and responses demonstrated high levels of correlation. The study found that Response Surface Methodology (RSM) is an effective statistical method for providing an appropriate empirical model for relating parameters and predicting the optimum performance of an asphaltic mixture to reduce flexible pavement failure.

High-cycle fatigue tests of pretensioned concrete beams

PCI Journal ◽  
2022 ◽  
Vol 67 (1) ◽  
Author(s):  
Jörn Remitz ◽  
Martin Empelmann
Keyword(s):  
Fatigue Life ◽  
High Cycle Fatigue ◽  
Concrete Beams ◽  
Fatigue Behavior ◽  
Fatigue Tests ◽  
Design Methods ◽  
Test Results ◽  
Cycle Fatigue ◽  
Pretensioned Concrete ◽  
Current Design

Pretensioned concrete beams are widely used as bridge girders for simply supported bridges. Understanding the fatigue behavior of such beams is very important for design and construction to prevent fatigue failure. The fatigue behavior of pretensioned concrete beams is mainly influenced by the fatigue of the prestressing strands. The evaluation of previous test results from the literature indicated a reduced fatigue life in the long-life region compared with current design methods and specifications. Therefore, nine additional high-cycle fatigue tests were conducted on pretensioned concrete beams with strand stress ranges of about 100 MPa (14.5 ksi). The test results confirmed that current design methods and specifications overestimate the fatigue life of embedded strands in pretensioned concrete beams.

Sign in / Sign up

Export Citation Format

Share Document