scholarly journals Optimal Network QoS over the Internet of Vehicles for E-Health Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Di Lin ◽  
Yuanzhe Yao ◽  
Fabrice Labeau ◽  
Yu Tang ◽  
Athanasios V. Vasilakos
Keyword(s):  
Electromagnetic Interference ◽  
Optimization Problems ◽  
Control Policy ◽  
Critical Issue ◽  
Healthcare Applications ◽  
Internet Of Vehicles ◽  
Optimal Network ◽  
Medical Sensors ◽  
High Level

Wireless technologies are pervasive to support ubiquitous healthcare applications. However, a critical issue of using wireless communications under a healthcare scenario is the electromagnetic interference (EMI) caused by RF transmission, and a high level of EMI may lead to a critical malfunction of medical sensors. In consideration of EMI on medical sensors, we study the optimization of quality of service (QoS) within the whole Internet of vehicles for E-health and propose a novel model to optimize the QoS by allocating the transmit power of each user. Our results show that the optimal power control policy depends on the objective of optimization problems: a greedy policy is optimal to maximize the summation of QoS of each user, whereas a fair policy is optimal to maximize the product of QoS of each user. Algorithms are taken to derive the optimal policies, and numerical results of optimizing QoS are presented for both objectives and QoS constraints.

scholarly journals Internet of Vehicles for E-Health Applications in View of EMI on Medical Sensors

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Di Lin ◽  
Xuanli Wu ◽  
Fabrice Labeau ◽  
Athanasios Vasilakos
Keyword(s):  
Nash Equilibrium ◽  
Rate Control ◽  
Electromagnetic Interference ◽  
Control Algorithm ◽  
Healthcare Applications ◽  
Joint Power ◽  
Wireless Technologies ◽  
Medical Sensors ◽  
Rate Control Algorithm ◽  
High Level

Wireless technologies are pervasive to support ubiquitous healthcare applications. However, RF transmission in wireless technologies can lead to electromagnetic interference (EMI) on medical sensors under a healthcare scenario, and a high level of EMI may lead to a critical malfunction of medical sensors. In view of EMI to medical sensors, we propose a joint power and rate control algorithm under game theoretic framework to schedule data transmission at each of wireless sensors. The objective of such a game is to maximize the utility of each wireless user subject to the EMI constraints for medical sensors. We show that the proposed game has a unique Nash equilibrium and our joint power and rate control algorithm would converge to the Nash equilibrium. Numerical results illustrate that the proposed algorithm can achieve robust performance against the variations of mobile hospital environments.

scholarly journals A time-predefined approach to course timetabling

2003 ◽  
Vol 13 (2) ◽  
pp. 139-151 ◽  
Author(s):  
Edmund Burke ◽  
Yuri Bykov ◽  
James Newall ◽  
Sanja Petrovic
Keyword(s):  
Local Search ◽  
Optimization Problems ◽  
Search Time ◽  
Test Problems ◽  
Solution Quality ◽  
Course Timetabling ◽  
Combinatorial Optimization Problems ◽  
University Course Timetabling ◽  
High Level

A common weakness of local search metaheuristics, such as Simulated Annealing, in solving combinatorial optimization problems, is the necessity of setting a certain number of parameters. This tends to generate a significant increase in the total amount of time required to solve the problem and often requires a high level of experience from the user. This paper is motivated by the goal of overcoming this drawback by employing "parameter-free" techniques in the context of automatically solving course timetabling problems. We employ local search techniques with "straightforward" parameters, i.e. ones that an inexperienced user can easily understand. In particular, we present an extended variant of the "Great Deluge" algorithm, which requires only two parameters (which can be interpreted as search time and an estimation of the required level of solution quality). These parameters affect the performance of the algorithm so that a longer search provides a better result - as long as we can intelligently stop the approach from converging too early. Hence, a user can choose a balance between processing time and the quality of the solution. The proposed method has been tested on a range of university course timetabling problems and the results were evaluated within an International Timetabling Competition. The effectiveness of the proposed technique has been confirmed by a high level of quality of results. These results represented the third overall average rating among 21 participants and the best solutions on 8 of the 23 test problems. .

scholarly journals A Web-based control and monitoring system for DAQ applications

2019 ◽  
Vol 214 ◽  
pp. 01049
Author(s):  
Alexey Anisenkov ◽  
Daniil Zhadan ◽  
Ivan Logashenko
Keyword(s):  
Monitoring System ◽  
Control Policy ◽  
Data Monitoring ◽  
Quality Of Data ◽  
Web Based ◽  
The Status ◽  
Recent Developments ◽  
High Level ◽  
Control And Monitoring System

A comprehensive and efficient environment and data monitoring system is a vital part of any HEP experiment. In this paper we describe the software web-based framework which is currently used by the CMD-3 Collaboration at the VEPP-2000 Collider and partially by the Muon g-2 experiment at Fermilab to monitor the status of data acquisition and the quality of data taken by the experiments. The system is designed to meet typical requirements and cover various use-cases of DAQ applications, starting from the central configuration, slow control data monitoring, data quality monitoring, user-oriented visualization, control of the hardware and DAQ processes, etc. Being an intermediate middleware between the front-end electronics and the DAQ applications the system is focused to provide a high-level coherent view for shifters and experts for robust operations. In particular, it is used to integrate various experiment dependent monitoring modules and tools into a unified Web oriented portal with appropriate access control policy. The paper describes the design and overall architecture of the system, recent developments and the most important aspects of the framework implementation.

scholarly journals Influence of Mobile Phones on the Quality of ECG Signal Acquired by Medical Devices

2013 ◽  
Vol 13 (5) ◽  
pp. 231-236 ◽  
Author(s):  
T. Buczkowski ◽  
D. Janusek ◽  
H. Zavala-Fernandez ◽  
M. Skrok ◽  
M. Kania ◽  
...  
Keyword(s):  
Mobile Phone ◽  
Mobile Phones ◽  
Medical Devices ◽  
Electromagnetic Interference ◽  
Spectral Characteristics ◽  
Base Stations ◽  
Standard Tool ◽  
High Level ◽  
Gsm Mobile Phone

Abstract Health aspects of the use of radiating devices, like mobile phones, are still a public concern. Stand-alone electrocardiographic systems and those built-in, more sophisticated, medical devices have become a standard tool used in everyday medical practice. GSM mobile phones might be a potential source of electromagnetic interference (EMI) which may affect reliability of medical appliances. Risk of such event is particularly high in places remote from GSM base stations in which the signal received by GSM mobile phone is weak. In such locations an increase in power of transmitted radio signal is necessary to enhance quality of the communication. In consequence, the risk of interference of electronic devices increases because of the high level of EMI. In the present paper the spatial, temporal, and spectral characteristics of the interference have been examined. The influence of GSM mobile phone on multilead ECG recordings was studied. It was observed that the electrocardiographic system was vulnerable to the interference generated by the GSM mobile phone working with maximum transmit power and in DTX mode when the device was placed in a distance shorter than 7.5 cm from the ECG electrode located on the surface of the chest. Negligible EMI was encountered at any longer distance.

Heart Rate Recovery Changes during Competition Period in High-Level Basketball Players

2018 ◽  
Vol 1 (80) ◽  
Author(s):  
Audrius Gocentas ◽  
Anatoli Landõr ◽  
Aleksandras Kriščiūnas
Keyword(s):  
Heart Rate ◽  
Heart Rate Recovery ◽  
Team Sports ◽  
Basketball Players ◽  
Coeffi Cients ◽  
Competition Period ◽  
Monitoring Training ◽  
Intense Training ◽  
High Level

Research background and hypothesis. Replete schedule of competitions and intense training are features of contemporary team sports. Athletes, especially the most involved ones, may not have enough time to recover. As a consequence, aggregated fatigue can manifest in some undesirable form and affect athlete’s performance and health.Research aim. The aim of this study was to evaluate the changes in heart rate recovery (HRR) and investigate possible relations with sport-specifi c measures of effi cacy in professional basketball players during competition season.Research methods. Eight male high-level basketball players (mean ± SD, body mass, 97.3 ± 11.33 kg; height 2.02 ± 0.067 m, and age 23 ± 3.12 years) were investigated. The same basketball specifi c exercise was replicated several times from September till April during the practice sessions in order to assess the personal trends of HRR. Heart rate monitoring was performed using POLAR TEAM SYSTEM. Investigated athletes were ranked retrospectively according to the total amount of minutes played and the coeffi cients of effi cacy. Research results. There were signifi cant differences in the trends of HRR between the investigated players. The most effective players showed decreasing trends of HRR in all cases of ranking.Discussion and conclusions. Research fi ndings have shown that the quality of heart rate recovery differs between basketball players of the same team and could be associated with sport-specifi c effi cacy and competition playing time.Keywords: adaptation, autonomic control, monitoring training.

Patient satisfaction and comfort after a full-arch immediate loaded prosthesis

2020 ◽  
Author(s):  
Elena Dellepiane ◽  
Francesco Pera ◽  
Paola Zunino ◽  
Maria Grazia Mugno ◽  
Paolo Pesce ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Oral Health ◽  
Intermediate Phase ◽  
Critical Issue ◽  
Health Impact ◽  
Immediate Loading ◽  
Oral Rehabilitation ◽  
Masticatory Ability ◽  
Chewing Ability

The aim of this study was to assess oral health related quality of life (OHRQoL) of patients before, during and after completion of implant-supported full-arch immediate loading rehabilitation according to the Columbus Bridge Protocol (CBP). 25 patients with compromised dentition were rehabilitated according to the CBP and were assessed for OHRQoL using 4 questionnaires specifically realized for this study and inspired to the OHIP (Oral Health Impact Profile) questionnaire. Patients assessed themselves before surgery, during the healing period (1 week and 2 months after surgery) and after definitive prosthodontic treatment (4 months after surgery). The questionnaires specifically investigated patients’ pain, confort, home oral hygiene habits, satisfaction related to esthetics, masticatory ability, phonetics and general satisfaction toward the treatment.Patients reported an improvement of OHRQoL after full-arch immediate loading rehabilitation. A statistically significant improvement in aesthetic and chewing ability was found. After 4 months 92% of the patients did not feel tense with their smile, 96% did not show problems to relate with other people or smiling, 92% did not show difficulty to eat some foods. Phonetics was found to be a critical issue, especially in the intermediate phase of healing. One week after surgery the percentage of patients who was very satisfied with phonetics slightly decreased from 48% to 36%. The assessment of patients' OHRQoL related to full-arch immediate loading implant therapy exhibited a significant improvement of their quality of life. The questionnaires herein presented could be an effective tool to evaluate patients' reaction to oral rehabilitation.

About Innovative Content of Subject-Oriented Pedagogical Education

2019 ◽  
Vol 28 (10) ◽  
pp. 106-117
Author(s):  
R. M. Asadullin
Keyword(s):  
Teacher Education ◽  
Teacher Training ◽  
Educational Process ◽  
Professional Activity ◽  
Subject Knowledge ◽  
Technological Structure ◽  
State Pedagogical ◽  
High Level ◽  
Competencies Development

The continuous modernization of the education system makes the problems of the quality of teacher training increasingly relevant. Moreover, the measures taken to improve the system of teacher education are largely confined to the introduction of new organizational and managerial mechanisms and practically do not affect the internal content and technological structure of the teacher training process.Modern pedagogical universities are constantly looking for innovative models of training teachers that will be able to solve non-standard social and professional tasks. However, recent studies in this area do not fully take into account the nature of pedagogical activity and conditions of its formation. Thus, the need arises for a special study of the processes and means of updating the content and technologies of teacher training in order to control the level of students’ professional competencies development, as required by educational and professional standards. This means the creation of a special educational system in a pedagogical university, which can provide a harmonious and synchronous mastering by future specialists of both subject knowledge and methods of pedagogical activity.The article provides a theoretical study aimed at identifying key patterns of designing a new content for teacher education, the basis of which is the formation of a future teacher as a subject of his own professional activity. The author describes the experience of using a subject-oriented model of education, implemented at Bashkir State Pedagogical University n.a. M. Akmulla. The effectiveness of this model is confirmed by the high level of students’ mastery of designing methods and constructing the educational process, as well as their positive experience in the implementation of educational activities.

Analisis Soal Matematika Tipe Higher Order Thinking Skills (HOTS) Tingkat SMP

2020 ◽  
Vol 2 (2) ◽  
pp. 112-129
Author(s):  
Lelly Oktafiana ◽  
Iis Holisin ◽  
Himmatul Mursyidah
Keyword(s):  
Power Level ◽  
Thinking Skills ◽  
Higher Order Thinking Skills ◽  
National Examination ◽  
Class Viii ◽  
Valid Test ◽  
Grade Material ◽  
Data Collection Technique ◽  
High Level

This study aims to describe the quality of the 2018 Mathematics National Examination (UN) in the HOTS types at the junior high level in terms of the level of validity, reliability, problem differentiation power, level of difficulty and distractor. This type of research is a descriptive study. The research was conducted at SMP Muhammadiyah 4 Surabaya and SMP Negeri 13 Surabaya for students in class VIII. The data collection technique used is a test. The test was taken from the 2018 math UN questions in odd semester VIII grade material including HOTS type. The number of UN mathematics questions in 2018 in the odd semester VIII class material consisted of 12 questions with 25% including LOTS types and 75% including HOTS types. The results showed: (1) 100% valid test questions, (2) high question reliability, (3) good problem differentiation power, (4) the difficuly level of the question 77,77% categorized as moderate and 2 question 22,23% are categorized as difficult, (5) there are 2 questions with one of the answer options do not work.

Software suite for determining the tilts of tower-type structures according to terrestrial laser scanning

2020 ◽  
Vol 961 (7) ◽  
pp. 2-7
Author(s):  
A.V. Zubov ◽  
N.N. Eliseeva
Keyword(s):  
Laser Scanning ◽  
Optimization Problems ◽  
Optimization Methods ◽  
User Participation ◽  
Software Suite ◽  
Current State ◽  
Visual Basic For Applications ◽  
Operational Data ◽  
Theoretical Developments

The authors describe a software suite for determining tilt degrees of tower-type structures according to ground laser scanning indication. Defining the tilt of the pipe is carried out with a set of measured data through approximating the sections by circumferences. They are constructed using one of the simplest search engine optimization methods (evolutionary algorithm). Automatic filtering the scan of the current section from distorting data is performed by the method of assessing the quality of models constructed with that of least squares. The software was designed using Visual Basic for Applications. It contains several blocks (subprograms), with each of them performing a specific task. The developed complex enables obtaining operational data on the current state of the object with minimal user participation in the calculation process. The software suite is the result of practical implementing theoretical developments on the possibilities of using search methods at solving optimization problems in geodetic practice.

Sign in / Sign up

Export Citation Format

Share Document